Laying of 100mm and 150mm dia water supply pipe line in Millenium paradise area, Badri garden area near Damana hata and Prachi enclave extended area near care hospital in ward No-08 of BMC, Bhubaneswar

Cutting asphalt or bituminous road of flexible pavments and disposal of dismantalled materials up a lead of 1000 mtr stacking servicable and unservicable materials separately including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Cutting concrete road for taking the water supply line through and making good to the damages using dismantled materials including cost of all labour, T & P etc. all complete as per the direction of engineer-in-charge.

Earth work in all kinds of soil within 50mtr initial lead and 1.5mtr initial lift including rough dressing and breaking of clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3mtr in depth as per direction of Engineer-in-charge.

Cutting in disintegrated rock not requiring blasting to be removed by pick axes and crow bars and depositing materials within 50m initial lead and 1.5m initial lift including rough dressing as per direction and specification of the department including stacking the useful materials separately as ordered etc as per direction of Engineer - in - Charge.

Supplying of materials, labour and T&P for excavation of foundation in laterite rock or any hard rock(other than granite or disintegrated rock)removed by chiselling including dressing and leveling the bed not exceeding 1.5mtr depth and depositing the soil within 50mtr initial lead as per specification approved by the Deptt.as per direction of Engineer-in-charge.

Supply of ISI Marked Centrifugally Cast (Spun) Ductile Iron Socket & Spigot Pressure Pipes in standard length with internal cement mortar lining and external bituminous coating conforming to IS 8329:2000 and its subsequent amendments & ISI Marked SB/EPDM Rubber Gasket (IS:5382) for Push-on type Flexible Joints of DI Pipes,including inspection, transportation, handling, loading, unloading, stacking, etc. all complete. (Cost of rubber gaskets shall be inclusive in the cost of pipes of different diameters, transportation etc including laying of D.I.K-7 S/S pipe as per the specification and direction of Engineer in charge cost inclusive of cost of pipe including all taxes, transportation to work site all complete

100mm dia D.I K-7 S/S pipe

150mm dia D.I K-7 S/S pipe

200mm dia D.I K-7 S/S pipe

Supplying of all labour, and T&P for providing Push-on-joints conforming to IS:3114 to centrifugally (Spun) Cast Iron Pipes or Ductile Iron pipes using rubber gasket conforming to IS:5382 of Styrene Butadene Rubber (S.B.R) quality, testing of joints,etc. all complete as per specifications and directions of Engineer-in-Charge.

100mm dia Push - on-Joints

150mm dia Push - on-Joints

200mm dia Push - on-Joints

Supplying all materials ,abour, T&P for providing ,laying,fixing and testing of DI/CI specials,bends,etc in trenches confirming to IS:1538 all complete (excluding earth work) as per specification and as per the direction of EIC.

Supplying all labour T&P for Cutting of C.I/ D I pipe by eletric arc welding at site including cost of materials,labour,T & P etc all complete e as per the direction of Engineer-in-charge.

Supplying of materials, labour and T&P for laying in trenches C.I. specials conforming to I.S.-1538 of the following diameter as per P.H. specifications . (excluding earth work in excavation,jointing and cost of specials) as per direction of Engineer-in-charge.

100mm dia MJ Socketed Tail Piece -

150mm dia MJ Socketed Tail Piece -

200mm dia MJ Socketed Tail Piece -

Supplying of all labour and T&P for cutting the MJ socket tail piece by lathe suitable to existing C.I. / D.I. pipe etc all complete as per direction of Engineer-in-charge.

Supplying all labour and T&P for providing and laying MS pipe and specials confirming to IS 3589/99 of quality grade FE 410 of following nominal dia and including transportation of pipes and fitting to site etc all complete as per the direction of E.I.C.

100mm dia MS Pipe(4.50mm thick)

100mm MS flange(10mm thick)

100mm MS 45* Plain bend(6.30mm thick)

100mm MS 90* Plain bend(6.30mm thick)

100-100-100mm MS Tee Plain

100mm MS Blank Flange(12mm thick)

150-100-150mm MS Tee Plain

150mm MS flange(12mm thick)

150mm MS Pipe(5.40mm thick)

150mm MS 45* Bend plain

150-150-150mm MS Tee

150mm MS Blank Flange(12mm thick)

150mm MS 90* Bend plain

150-100mm MS Reducer Plain

200mm MS PiPe(6.30mm thick)

200mm MS flange(12mm thick)

200mm MS 45* Bend plain

200mm MS 90* Bend plain

200-150-200mm MS Plain Tee

Supplying all materials,labour and T&P and making flanged joints for C.I. / D I pipes and specials of the following diameter including testing of joints as per specification and direction of Engineer-in-charge

100mm flange joints

150mm flange joints

200mm flange joints

Supplying all labour and T&P for cutting of following dia MS pipe in treanches by gas cutter set of pocket etc all complete

Supplying all labour and T&P for jointing following dia MS pipe in treanches by electric arc welding & genetator set of pocket etc all complete

Supplying all materials Labour & T & P for Fixing of Durojet Tamper proof Air Valve ( VAG make) for water works purposes conforming to IS specification for the following nominal diameters as per specification complete including cost of Air valve .

25mm dia Durojet Tamper Proof Air Valve(VAG/AVK/Talis /IVCmake)

Supplying all materials, labour and T&P for Supply, Installation & Testing of Ductile Iron Resilient Seated Glandless Sluice Valve of RATING PN - 1.6 (IS 14846) with double flanged ends for water works purpose of the following rating and nominal diameters, all complete as per specification and direction of Engineer-in-Charge,(including cost of Nut bolt & Washer,Rubber Insertion sheet, etc.)

100mm dia DI Glandless Sluice Valve (ISI) PN-1.6 without wheel.(preferable VAG/ Talis/ AVK/IVC/ Kirloskar make)

150mm dia DI Glandless Sluice Valve (ISI) PN-1.6 without wheel.(preferable VAG/ Talis/ AVK/ IVC/ Kirloskar make)

200mm dia DI Glandless Sluice Valve (ISI) PN-1.6 without wheel.(preferable VAG/ Talis/ AVK/ IVC/ Kirloskar make)

Supplying all materials,labour and T&P and constructing brick masonry sluice Valve chamber of over all of following internal ; earth work in excavation in all kinds of soil laying of 150mm thick cc (1:3:6) with crusher broken hard granite metal up to 4cm size metal 250mm thick brick masonary working CM (1:4) with fly ash bricks having crushing stremgth between 75 kg/cmsq 12mm thick cement plastering with CM (1:3) with punning for inside surface & out side plastering above GL & cement pointing below GL etc. all Complete including precast factory made heavy deauty RCC cover slab with frame (SD-20) made out of M30 concrete to with stand again 20mt vehicular load as per the approved drawing if any and the direction of EIC.

S.V. chamber internal size:-[0.75x0.75x1.225mtr]

S.V. chamber internal size:-[1.00x1.00x1.50mtr]

Supplying all materials, labour and T& P for making of MS Cover made out by 40x40x6mm(A), 35x35x6mm(A) 5mm thick MS sheet, including cutting weilding as per required size making with fixing by CC(1:2:4) complete paint & transportation etc. as per dierction of eic.

S.V. chamber internal size:-[0.90x0.90x1.20mtr]

Supplying and Filling well graded sand including watering, ramming, consolidating, dressing, etc. all complete as per specifications and direction of Engineer In-charge for: (including cost of sand).

Cement concrete (1:4:8) with 4cm. Size crusher broken hard Granite metal including cost of all labour, materials with all taxes, lead,T & P etc all complete .

Supplying all materials, labour and T & P for Cement concrete (1:2:4) with 12mm size crusher broken hard granite metal including cost of all labour, materials with all taxes, lead, T & P etc all complete and as per direction of Engineer -in- Charge.

Supplying of materials, labour and T&P for filling foundation and plinth with excavated materials etc as per direction of Engineer-in-charge.

Supply all labour,T&P for carriage of surplus earth by mechanical means with a lead of 5Km including Loading and un loading &conractor profit & Labour cess etc all complete as per the direction of Engineer-in-charge