CONSTRUCTION OF SHED AT MAHUDI DUDH MADALI, TA:MANDVI, DIST: SURAT

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

1 Excavation for foundation upto 1.5 m depth including 14.00 CMT. 122.93

sorting out and stacking of useful materials and

disposing off the excavated stuff upto 50 Meter lead. (A)

Loose or soft soil ( I ) 0 To 1.5 mt. Depth

2 Filling available excavated earth (Including rock in 9.50 CMT. 136.91

trenches plinth, sides of foundations etc. in layers not

exceeding 20 cm. in depth consolidating each deposited

layer by ramming and watering)

3 Providing & filling in plinth with murrum or yellow soil 31.50 CMT. 301.77

watering, ramming & consolidation etc. complete.

4 Filling in plinth with sand under floors including 16.00 CMT. 481.80

watering ramming, consolidating and dressing

complete (A) Foundation and plinth

5 Providing and laying cement concrete 1:2:4 (1-Cement : 18.00 CMT. 3923.85

2- coarse sand : 4- hand Machine crushed stone

aggregates 40 mmnominal size) and curing complete

including cost of formwork in (A) PCC

6 Providing and laying controlled cement concrete M.250 2.50 CMT. 4494.50

and curing complete inculding the cost of formwork

but Excluding the cost of reinforcement for reinforced

concrete work in foundation, footings base of column

and mass concrete. (A) Footing

7 Providing and fixing TMT bars Fe-500D steel 572.50 Kg 77.28

reinforcement for R.C.C. work including binding,

bending and placing in position complete upto floor two

level ,Ground Floor, First Floor , Second Floor, Third

Floor, Terrace Floor (all floor).

8 Brick work using common brunt clay building bricks 1.50 CMT. 4214.32

having crushing strength not less than 35 kg/sqcm. in

foundation and plinth in cement mortar 1:6 (1 cement :6

fine sand) etc.comp. (B) Conventional Ground floor

upto Plinth

9 Applying priming coat over new steel and other metel 136.00 SMT. 128.62

surface after and including preparing the surface by

throughly cleaning, oil,grease, dirt and other foreign

matter and scoured with brushes fine steel wood,

scrapers and sand paper with ready mixed priming paint

brushing red lead. and Painting two coats (excluding

priming coat) on new steel and other metal surface with

enamel paint, brushing, interior to give an even shade

including cleaning the surface an even shade including

cleanicn the surface of all dirt, dust and other foreign

10 Steel work welded in built up sections, framed work 27.24 Quintal 9108.48

including cutting, hoisting, fixing in position and

applying a priming coat of red lead paint :-

(A) In beams and joints channels angles, column, tees,

flats with connecting plates or angle cleats as in

SHEDULE B Page

Description of Item (With brif Specification And Rate in

Item No. Quantity Unit Amount

Reference to Book of Specifications) Figures

11 Providing & fixing colouron galvaniced steel, zinc / 132.00 SMT. 1277.65

aluminium alluscoated sheet 0.80 mm. thick roofing

fixed with gslvanised grom J or L hook bolts and bolt

8mm dia with bituman and impet washer filled

withwhite lead etc. Excluding the cost of purlins rafter

and trusses.

12 Providing, laying and jointing in true line and level 110 16.00 RMT 878.56

diametre U.P.V.C (Type B) conforming to IS 13592-

1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall

be jointed with each other with rubber lubricant, pipe

shall be fixed on wall using of PVC clamp of the size

110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in

walls as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints

and jointed with adhesive solvent cement including cost

of all materials.

Rupees Six Lakh Nine Hundred Eighty Paise Thirteen Only

I we am / are willing to carry out the work at …................................ % above/ Below percent ( Should Be writen

in figures And words) of the estimated rate mentioned above. Amount of my / our tender works out as under.

Estimated Amount Put to tender. 6,00,980.13 Estimated Amount Put to tender.6,00,980.13

Deduct…........ % Below Deduct…........ % Below

In Words In Words

(1) The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-Charge

for which no extra payment shall be made.

(2) The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

(3) GST and Income tax TDS will be deducted at a source while making payments of bills

(4) In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-10/2017

Cement Consumption/16/C Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is a change as per

actual mix design the cost of difference of cement consumption have been deducted from the rate of original item at the rate

of input rate mentioned in all the tender.

Signature of Bidder

Deputy Executive Engineer Divisional Accountant

Panchayat ( R&B) Sub Division Panchayat ( R&B) Division

Mandavi Surat

Executive Engineer

Panchayat ( R&B) Division

SHEDULE B Page