CONSTRUCTION OF COMMUNITY HALL AT TALALA DIST. GIR SOMNATH

NAME OF WORK: - CONSTRUCTION OF COMMUNITY HALL AT TALALA DIST. GIR SOMNATH

SR. NO. DISCRIPTION AMOUNT

SCHEDULE CONSTRUCTION OF COMMUNITY HALL AT TALALA DIST. GIR SOMNATH

B-1 UNDER SJMMSVY 2025-26 SCHEME

I/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs. 41,30,874.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika

TALALA NAGARPALIKA -TALALA

NAME OF WORK :- CONSTRUCTION OF COMMUNITY HALL AT TALALA DIST. GIR SOMNATH

UNDER SJMMSVY 2025-26 SCHEME

Description Qty Unit Rate Amount

1 Excavation for foundation up to 1.5 Meter depth

including sorting out and stacking of useful

materials and disposing of excavated stuff up to

Meter lead (a) For Loose or Soft soil 17.08 cum 128.79

2 Excavation for foundation up to 1.5 Meter depth

including sorting out and stacking of useful

materials and disposing of excavated stuff up to

Meter lead (b) Dense or hard soil 17.08 cum 164.64

3 Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead.(C) Hard Murrum 20.88 cum 281.73

4 Excavation for foundation upto 1.5 m depth

including sorting out and stacking of useful

materials and disposing off the excavated stuff

upto 50 Meter lead. (D) Soft rock not requiring

Blasting 1.36 cum 289.40

5 Filling available excavated earth (excluding rock) in

trenches, plinth, sides of foundations etc. in layers

not exceeding 20 cm. In depth consolidating each

deposited layer by ramming and watering 22.40 cum 137.47

6 Filling in foundation and plinth with murrum or

selected soil in layers of 20 cm thickness including

watering, ramming and consolidating etc.complete. 52.93 cum 307.41

7 Providing and laying cement concrete 1:2:4 (1-

cement : 2- coarse sand : 4- graded stone

aggregate 20 mm. Nominal size) and curing

complete excluding cost of form work in :(a)

Foundation and plinth 5.69 cum 3842.91

8 Providing and laying cement concrete 1:3:6 (1

Cement : 3- coarse sand :6- crushed stone

aggregate 40 mm. Nominal size) and curing

complete excluding cost of form work in :(a)

Foundation and plinth 12.71 cum 3281.49

9 Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base

of columns and Mass concrete. (upto 10 ton)

RCC Column Footing 17.22 cum 4913.65

10 Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base

of columns and Mass concrete. (upto 10 ton)

Column Up to Plinth level 0.88 cum 6763.97

11 Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

formwork and reinforcement for reinforced

concrete work in (D) Columns, Pillars posts and 9.40 cum 7123.53

struts upto floor two level. (upto 10 ton) RCC

12 Providing and laying controlled cement concrete

M.250 and curing complete including the cost of

formwork and reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level. (up to 10 ton)

Plinth Beam 10.57 cum 6835.68

13 Providing and laying controlled cement concrete

M.200 and curing complete including the cost of

formwork and reinforcement for reinforced

concrete work in (C) Slabs, landing, shelves,

Balconies Lintels, Beams, Girders and

Cantilever upto floor two level. (upto 10 ton) RCC

Floor Beams at Slab lvl. Ground Floor 23.40 cum 6122.62

14 Providing laying Controlled cement concrete M-200

and curing complete including the cost of form

work and excluding cost of reinforcement for

reinforced concrete work in : RCC Lintels Ground

Floor 4.27 cum 6158.98

15 Providing laying Controlled cement concrete M-200

and curing complete including the cost of form

work and excluding cost of reinforcement for

reinforced concrete work in :RCC Slabs &

LandingsGround Floor 30.08 cum 6923.55

16 Providing laying controlled cement concrete M-200

and curing complete including the cost of form

work and excluding cost of reinforcement for

reinforced concrete work in : RCC Chhajja/Sill

Ground Floor 2.58 cum 7218.47

17 Providing TMT Bar FE 500/500D reinforcement for

R.C.C. work including bending, binding, and

placing in position complete upto floor two level.

Ground Floor 13574.60 Kg. 77.29

18 Brick work using common burnt clay building

bricks having crushing strength not less than

kg./Sq.Cm. in superstructure above plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B)

Conventional 88.12 cum 4640.76

19 Half brick masonry in common brunt clay building

bricks having crushing strength not less than

Kg/Sq.Cm. in Cement mortar 1:3 ( 1-Cement : 3-

coarse sand ) with 2 Nos of 6mm Mild steel round

bars after every three course embedded in Cement

Mortar in superstructure above plinth (B)

Conventional 14.44 cum 768.96

20 Providing 15 mm thick cement plaster in single

coat on fair side Brick/concrete walls for interior

plastering up to floor two level and finished even

and smooth in & Extra over items for finishing with

a floating coat of neat cement slurry. (ii) Cement

mortar 1:4 ( 1 cement : 4 sand) Ground Floor 578.72 Sqm 233.26

21 Providing 10 mm thick cement plaster in single

coat on ceiling and soffit of stair for interior

plastering up to floor two level and finished even 132.30 Sqm 205.61

and smooth in & Extra over items for finishing with

a floating coat of neat cement slurry for plastering

on ceiling and soffits of stairs up to floor two level

instead of plastering on walls.(ii) Cement mortar

1:4 ( 1 cement : 4 sand) Ground Flool

22 20 mm thick sand faced cement plaster on walls

upto height 10 meters above ground level

consisting of 12 mm thick backing coat of c.m. 1:3

(1:cement - 3:sand) and 8 mm thick finishing coat

of c.m. 1:1 (1:cement - 1:sand) etc. complete

23 Providing and laying white glazed tiles of 6 mm

thick in flooring, treads of steps and landing laid on

a bed of 12 mm thick cement mortar 1:3

(1:Cement - 3-Coarse Sand) finished with flush

pointing in white cement. 8.31 Sqm 909.91

24 Providing and laying white glazed tiles of 6 mm

thick in skirting of steps and dado on 10 mm thick

cement plaster 1:3 (1:Cement - 3-Coarse Sand)

and jointed with white cement slurry 49.79 Sqm 1127.48

25 Providing and laying Polished Granite slab (18mm

thick) slab flooring over 20mm (Average) thick

base of cement mortar 1:6 (1-cement : 6-Coarse

sand) or L.M. 1:1.5 laid over and jointed with grey

cement slurry including rubbing and polishing

complete (Basic Granite rate shall be 250/Sft) (A)

Granite slab 18mm thick 41.31 Sqm 4229.48

26 Providing and laying Polished Granite slab (18mm

thick) is riser of steps dado and pillars laid 10mm

thick cement mortar 1:3 (1-cement : 3-coarse

sand) and jointed with grey cement slurry

including rubbing and polishing etc. complete

(Basic Granite rate shall be 250/Sft) 8.86 Sqm 4371.91

27 P & L 24" x 24" vitrified 8 mm thick tile flooring

over 20 mm (average) base of cement mortar 1:6

( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material

including dismantling of existing flooring and

jointed with colour cement slurry including finished

with flush pointing & cleaning the surface etc.

complete for antiskit (upto 10 ton) 182.85 Sqm 1472.91

28 Providing and laying broken china mosaic flooring

for terrace using 12 mm to 20 mm broken pieces

of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar

crème out up to surface using white cement

including rounding off junctions and extending

them up to 15cm along the wall clearing with

water and oxalic acid etc. as directed 98.61 Sqm 779.70

29 Providing and fixing 35 mm thick shutters for

doors, windows and clerestory windows and

including Indian teak wood frames 12 cm x 7 cm.

size including anodized aluminium fixtures and

fastenings including primer coat of approved

quality and two coats of oil painting etc., complete.

(ii) Fully Panelled 13.19 Sqm 5533.68

30 Providing & fixing FRP Frame size 100 x 50 mm

and 28 mm thick FRP Depress Pannel Shutter

having extra reinforcement on sides and edges and

gel coat finish. The core of the shutter is to be

filled up with injected fire retardant grade

polyurethane foam done insitu along with

embedded wooden pieces for stiffing and also for

taking hings anf fixtures. The whole FRP Frame

and shutter is to be waterproof weather proof

termite proof and resistance to mild acid / Alkali,

rates are to be inclussive of S.S. hings with

necessary screws and alluminium fixtures and

fastening 9.78 Sqm 2377.76

31 Providing and fixing window having extruded aluminum

Colour anodized section frame main outer size 63.50 x

38.10 x 1.95 mm(of Jindal Section no:4605,@ Wt 1.094 Kg

/ Rmt), horizontal two track member size 61.85 mm x

31.75 mm x 1.20mm (of Jindal Section no: 8687 @ wt.of

0.695 Kg/mt), vertical member of size 61.85 mm x

31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of

0.0.659 Kg/mt) with sliding

shutters of horizontal member size 40mm x 18mm

x 1.29mm (of Jindal Section no:8949 @ wt.of

0.456Kg/mt), vertical member of size 40mm x

18mm x 1.29mm (of Jindal Section no:8947 @

wt.of 0.456Kg/mt/ Section 8948, @ Wt.

Kg/mt) with 5 mm thick transparent bronze colour

tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant

glass fixing to frame as per details etc complete for

window. 27.07 Sqm 1713.70

32 Applying two coats of Birla or Asian acrylic lapy (

putty) & two coats of primer of approved brand

and manufacture on new wall surface to give an

even shade including thoroughly brushing the

surface free from mortar dropping and other

foreign matter and sand papered smooth. 711.02 Sqm 40.59

33 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including thoroughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth. 578.72 Sqm 86.79

34 Wall painting (two coats) with plastic emulsion

paint of approved brand and manufacture on

undecorated wall surface to give an even shade

including thoroughly brushing the surface free

from mortar droppings and other foreign matter

and sand papered smooth. for ceiling and Soffit 132.30 Sqm 92.58

35 Finishing wall with weather proof exterior emulsion

paint on wall surface (two coats) to give an

required shape even shade after thoroughly

brushing the surface to remove all dirt, and

remains of loose powdered materials. etc complete 475.80 Sqm 122.14

36 Providing and fixing to wall, ceiling and floor

Kgf/cm2 working pressure polyethylene pipes of

the following outside dia. Low density, complete

with special flange compression type fittings wall

clamps etc. including making good the wall, ceiling

and floor.(E) 50 mm. 20.00 Rmt 181.98

37 Providing laying and jointing in true line and level

15mm dia. U.P.V.C. pipe (SCH-40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer in charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials. 10.00 Rmt 72.65

38 Providing laying and jointing in true line and level

32mm dia. U.P.V.C. pipe (SCH-40) for cold water

including fittings make PRINCE / SUPREME /

ASTRAL / FINOLEX or equivalent as approved by

Engineer in charge. Pipe shall be fixed on the wall

with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and

fixing the same with adhesive solvent, including

cost of all materials. 6.00 Each 119.15

39 Providing and fixing PVC SWR Nahni Trap IS

For Drain 100mm Diameter With jali of the

following nominal diameter of self cleansing design

with C.I. Scresd down or Hinged grating including

the cost of cutting and making. 12.00 Each 601.94

40 Constructing brick masonry chamber for under

ground C.I. Inspection chamber and bends with

bricks having crushing strength not less than

Kg/cm2 in cm. 1:5 C.I. Cover with frame (light

duty) 455 mm. X 610 mm. Internal dimensions,

total weight of cover with frame to be not less than

38 Kgs. weight of cover 23 Kg. and wt. of frame

Kg) R.C.C. top slab with 1:2:4 mix(1 cement :

coarse sand : 4 graded stone aggregate 20 mm.

size ) foundation concrete 1:5:10 inside plaster

mm. thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls & abed

concrete etc. complete (I) inside dimensions,

mm. 610 mm. And 450 mm. Deep for single pipe

line 2.00 Each 2932.93

41 Providing laying and jointing in true line and level

110mm diameter U.P.V.C. SWR type B pipe

conforming to IS 13592-1992 with one end plain

and other end socketed with rubbering, & fitting

conforming to ISI 14735-1999 of approved make

for drainage system pipe line, pipe shall be jointed

with each other with rubber lubricant, pipe shall be

fixed on wall using of PVC clamp of the size

110mm dia. x 149 mm length x 145 mm high at

every 2000 mm center to center or shall be 15.00 Rmt 918.67

concealed in walls as directed including necessary

fittings such as bends, shoes etc. including testing

of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

42 Providing and fixing in position cowl vent to pipes

:(I) 75 mm dia. 1.00 Each 393.04

43 Providing and fixing to wall ceiling and floor 1.0kg.

F/cm2 working pressure polythene pipes of the

following outside Dia. Low density, complete with

special flange compression type fittings, wall clips

etc. including making good the wall ceiling and

floor. (F)75mm 10.00 Rmt 280.23

44 Providing and fixing screw down bib taps of

following size : (A) Brass screw down bib tap

polished bright (I) 15mm dia. 10.00 Each 186.83

45 Providing and fixing Pillar Tap, capstan head, screw

down high pressure with screws, shanks and back

nuts (A) 15 mm. Dia 2.00 Each 308.73

46 Providing and fixing chromium plated brass half

turn flush cock of approved quality including fixing

in pipe line etc. complete. (ii) 25 mm. Dia 6.00 Each 263.77

47 Providing and fixing C.I. Manhole cover 0.60m x

0.45m size having weight not less than 35 kgs. 2.00 Each 958.17

48 Providing erecting and fixing double coated coated

syntex PVC (ISI) water tank of required capacity

each with all necessary fittings and connection etc.

complete on terrace. 2000.00 Lit 3.95

49 Providing and fixing M.S. grills of required pattern

to wooden frames of windows etc. with M.S. flats

at required spacing and frame around, square or

round bars with round headed bolts and nuts or by

screws. (A) Plain Grill. 501.00 Kgs. 111.29

50 Applying priming coat over new steel and other

metal surface after and including preparing the

surface by thoroughly cleaning, oil, grease, dirt

and other foreign matter and scoured with brushes

fine steel wood, scrapers and sand paper with

ready mixed priming paint brushing red lead. 52.70 Sqm 38.50

51 Painting two coats (excluding priming coat) on new

steel and other metal surface with enamel paint,

brushing, interior to give an even shade including

cleaning the surface an even shade including

cleaning the surface of all dirt, dust and other

foreign matter. 52.70 Sqm 96.59

52 Providing and fixing wash down water closet

(European type, W.C. Pan) with integral P or S trap

including jointing the trap with soil pipe in Cement

Mortar 1:1 (1-Cement : 1-fine sand) (Seal and

cover to be measured and paid for separately)(A)

vitreous China Pattern :(i) in white colour 5.00 Each 1356.81

53 Providing and fixing 100mm size P or S trap for

water closet squatting pan including jointing the

trap with the pan and soil pipe in cement Mortar

1:1 (1-Cement : 1-Fine sand)(A) Vitreous China. 5.00 Each 348.22

54 Providing and fixing 12.5 Litres low level flushing

cistern with a pair, of C.I. or Mild brackets, 5.00 Each 2370.39

complete with fittings such as lead valve less

syphon, 15mm nominal size brass ball valve with

polythene float, C.P brass handle unions and

couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled

flush bend including cutting holes in walls and

making good the same connecting the flush bend

with cistern and closet (overflow pipe to be

measured and paid for separately)(A) Vitreous

China (I) In white colour

55 Providing and fixing in position with clamps etc.

32mm nominal internal diameter galvanised steel

tube flush pipe for high level flushing cistern

including connecting the flush pipe with cistern and

closet and making good the walls and floors. 5.00 Each 288.73

56 Providing and fixing G.I. inlet connection for flush

pipe with W.C. Pan 5.00 Each 29.40

57 Providing and fixing Urinal or approved quality

including connecting the Urinal with waste pipe

tap etc. complete.(A) White earthenware flat back

or corner type size 430mm x 260mm x 350mm. 4.00 Each 1074.86

58 Providing and fixing of ABC Types Store Pressure

Fire Extinguisher Having capacity 6 KG Filled With

Mono Ammonium Phosphate Power 50% confims

to IS 4308, Store Pressure Types, UGTS Pressure

Gauge, Can Height 530mm, Diameter 150±

10mm, Discharge Time 24 Sec, Controllable

discharge mechinsm, jet Range 5 Meter, Average

Discharge is 92%,applicable on class A,B & C and

electrially started Fire, Fire Rating 4A:144B, Can

Construction : Deep drawn & CO2 Mig welded,

EPDM (Ethylene Proylene Diene Monomer)Rubber

Hose with both end Aluminum clamped, Inernal

Coating - Epoxy Powder coating, External Coating -

Pure Polyester Powder Coating (UV Resistant),

Brass forged CE Marked Valves with NRV & Auto

Safety Release with Safety Pin is of SS Material

Made Up Referance weight:- Gross Weight 8.9 Kg,

Empty Weight 2.9 Kg,

1) Necessary certificate and gurantee must be

2) OEM has to provide wall munting heavy duty

bracket\clamp, screw, hardware for installation.

3) Following printed marking Manufacturing Date &

Expiry Date must be mention on extiguisher.

4) Refilling period Must be of 3 Years. Following

Printed marking on equiment must be required:-

Model No, Capacity, Gross weight, Content, Fire

rating, Batch No. Serial No., MFG Month, Refilling

Due.[With Necessary numbering /marking with oil

paint by painter as instructions given by

G.S.P.H.C.L. engineer] (Make :- KANEX, MINIMAX,

CEASEFIRE ) 4.00 Each 1074.86

59 Point wiring for Looped Plug with 6A Modular type

switch & 5 pin socket erected on PVC / Metallic box,

single mounting base frame covered with textured / 0.00 Point 236.34

metallic front plate modules erected on / in wall /

ceiling with following type accessories Cat. II

60 Point wiring for Light / Bell with 2-1.5 sq.mm &

earthwire of 1.5 sq.mm (Green) both are of ISI marked

1.1 KV grade FRLS PVC insulated multistrand copper

wires, in following type of pipe to be erected concealed

in/ on surface on wall/ceiling complete with 6A

Modular type switch / bell push & accessories and

earth continuity of following type, erected on PVC /

Metallic box, single mounting base frame covered with

textured/metallic front plate modules erected on / in

wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose / H.D.Connector as directed.

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. II 38.00 Point 465.61

61 Point wiring for FAN with 2-1.5 sq.mm & earthwire of

1.5 sq.mm (Green) both are of .ISI marked 1.1 KV

Grade FRLS PVC insulated multistrand copper wires,

in following type of pipe to be erected concealed in /

flushed on wall/ceiling complete with 6A Modular type

switch and hum free EME four or more step type

electronic fan regulator(2M) with separately mounted

and accessories with earth continuity of following type

erected on PVC / Metallic box, single mounting base

frame covered with textured/metallic front plate

modules erected on / in wall / ceiling as per pipe

erected. with necessary ceiling rose / H.D.Connector as

directed.(f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling omplete

Cat. II 12.00 Point 654.48

62 Point wiring for Individual Plug with & earthwire of

1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade

FRLS PVC insulated multistrand copper wires, in

following type of to be erected concealed in / on

surface of wall / ceiling complete with Modular type

switch & 5 pin Plug erected on PVC / Metallic box

covered with appropriate front plate modules erected

on / in wall / ceiling as per pipe erected with following

type of accessories. [II] For 16A Plug with 2-2.5 sq.mm

(f) with medium class Rigid PVC pipe and accessories

erected concealed in wall/ceiling complete Cat. II 7.00 Point 493.89

63 Providing following type of Modular Type Accessories

mounted with pvc / metallic/Wooden box, single

mounting base frame covered with textured / metallic

front plate, modules erected with necessary

connection. As desired by Engineer In charge (7) Blank

Plate Single Cat. III 21.00 Each 236.34

64 Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA

powder coated and high U.V. & corrosion resistance 28.00 Each 165.64

with diffuser and/or Polycarbonate optics with

company mark/name 120 to 300 V, Power Factor more

than 0.9, THD < 10 %, CCT 4000 K to 6500K,

Uniformity ratio >0.7, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85 % CREE /

OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ Bridge

lux (U.S.A.) make LED used for luminaire. ( fitting

required LM-79 & LM-80 Certificates) (NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings. The Engineer in charge may select any

wattage capacity between the ranges shown.)

(A) Tube Light with integral driver (i) 5-10 Watts,

Surge-2 KV, IP-20, conventional 1 to 2 feet

65 Supplying and erecting LED indoor fittings with LEDs

of wattage 0.2 Watt to 0.5 Watt assembled on single

MCPCB, with housing used as a heat sink shall be made

of thick sheet Steel conforming to IS: 513/CRCA

powder coated and high U.V. & corrosion resistance

with diffuser and/or Polycarbonate optics with

company mark/name 120 to 300 V, Power Factor

more than 0.9, THD < 10 %, CCT 4000 K to 6500K,

Uniformity ratio >0.7, Luminaire efficacy>

lumens/watt , LED driver efficiency > 85 % CREE /

OSRAM / PHILIPS Lumileds / NICHIA / SEOUL/ Bridge

lux (U.S.A.) make LED used for luminaire. ( fitting

required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of

LED fittings. The Engineer in charge may select any

wattage capacity between the ranges shown.)

(A) Square/ Circular Surface/Recessed Mounted

Downlight with provision for spring loaded mounting

clips complete. (A) 22-24 watts, Surge-2 KV Cat. III 18.00 Each 758.51

66 Providing and erecting Sheet Steel powder coated MCB

distribution board - flush / surface mounted fitted with

bus bar, neutral link, earth bar and DIN rail, confirming

to IS 13032 and BS 5486-1986 without MCB to house

appropriate nos. of MCBs.(The DBs should be used of

same company of MCB to be used)

(E) Single phase 8 way single door 6.00 Each 702.96

67 Miniature circuit breaker single pole 6A to 32A suitable

to operate on 240 V A.C. system and having breaking

capacity 10 KA to be erected in existing box.

confirming to IS 8828/1996 with ISI Mark Cat II 7.00 Each 91.91

68 Supplying & erecting approved make low noise

decorative exhaust fan having size 200mm with

RPM with square frame ABS body with inbuilt lowers &

square frame. 2.00 Each 1703.87

69 providing and erecting Approved make RCCBs

conforming to IS: 12640 and having sensitivity of

mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz.

having characteristic of quick action & tripping with all

advance feature & do not incorporate any electronic 6.00 Each 1627.11

component. For following Max. Rating erected as

directed (i) 25 Amps. DP CAT-ll

70 Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected on/in

wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps

with following dia of pipes, in approved manner as

directed (a) 20 mm 265.00 Mtr. 24.24

71 Providing and erecting ISI mark Medium class RIGID

PVC PIPES of following size complete to be erected on/in

wall or ceiling erected with necessary PVC fittings &

Junction boxes fixed with adhesive solution & Clamps

with following dia of pipes, in approved manner as

directed (c) 32 mm 20.00 Mtr. 54.54

72 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I. Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications.(b)For Electrical

installation up to 11 KV in normal soil.Length of Pipe:

2.00 Mtr Back filling Compound: 1 no. Bag of 25 Kg. 3.00 Each 5760.03

73 Supplying & erecting earth pit of minimum bore

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free G.I. Pipes having Outer

pipe dia of 50mm having 80-200 Micron galvanising,

Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for

following type of applications. Providing and erecting

HOT deep Galvanised iron strip wire 8 to 16 SWG. 10.00 Kg. 77.77

74 Point wiring for Two Way Controlled Light Point with

2-1.5 sq.mm & earth wire of 1.5 sq.mm (green) both

are of .ISI marked 1.1 KV grade FRLS PVC insulated

multistrand copper wires, in following type of pipe to

be erected concealed in / flushed on wall/ceiling,

complete with 6A Modular type switches and following

type of accessories erected on PVC / Metallic box,

single mounting base frame covered with textured /

metallic front plate modules erected on / in wall /

ceiling as per pipe erected. With necessary

batten/angle holder or ceiling rose or H.D. Connector

as directed. (f) With medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete

Cat. III 2.00 Point 581.76

75 Providing following type of Modular Type Accessories

mounted with pvc / metallic box, single mounting base

frame covered with textured / metallic front plate,

modules erected with necessary connection. As desired

by Engineer In charge (4) TV Co-axial Socket outlet,

Cat. II 1.00 Each 140.39

76 Supplying & erecting approved make LAN cable of

following size in existing pipe as per direction, [C] CAT

77 Providing & erecting Approved make Power Saving

Watt Ceiling Fan with double ball bearing ISI mark

with Condenser 230 volt A.C. 50 Hz 1200 mm sweep

complete having 3blades with aluminium blades with

canopy & 30 cms. down rod erected with 24/ 0.2,

core flexible wire with Earthing.(Make shall be

approved by Engineer in charge) 12.00 Each 1948.29

78 Supplying and erecting 19 / 20 mm. nominal bore

Medium Class M.S. Pipe down rod erected duly painted

for fan complete with proper insulation without

leakage and Earthing. 12.00 Mtr. 108.07

79 Supplying & erecting fan hook box of 10 mm M.S.

round bar bounded to the RCC bars up to 50mm length

each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in

Ceiling with necessary finishing. 12.00 Each 108.07

80 Providing 2.5mm.thick laminated acrylic sheet to cover

the fan hook or Fan box 12.00 Each 18.18

81 Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class

Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm 45.00 Mtr. 62.62

82 Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected concealed in /flushed on

wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth

continuity of following size (a) with medium class

Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm 40.00 Mtr. 82.82

83 Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following

size (a) with medium class Rigid PVC pipe and

accessories (a) 2 wire 4 sq. mm 90.00 Mtr. 112.11

84 Mains with 1.1 KV grade FRLS PVC insulated ISI

marked stranded Copper conductor wire in following

type of pipe to be erected in / on wall / ceiling with

sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following 60.00 Mtr. 260.58

size (a) with medium class Rigid PVC pipe and

accessories (h) 4 wire 6 sq. mm

85 Providing & erecting weather proof, dust & vermin

proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 protection &

above as per requirement made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick

CRC M.S. sheet for internal partitions with necessary

supporting angles, flats including cutting, bending,

drilling, welding, riveting with internal partitions &

cable alley as per requirements & instruction of

engineer-in-charge with erection of supplied switch

gears, BUSBARS, with suitable size of inter connecting

PVC copper wire / copper-aluminium strips, rubber

grommets, rib, Bakelite control fuses for measuring

instruments, earth bus & earth bolts, foundation flange

- bolts-base Plates, sufficient nos. of hinged doors,

handles with locking arrangement and rubber gasket,

heavy duty end terminal connection complete. The

Panel shall be painted with epoxy powder coating.

(The rates excludes the cost of switchgears, bus bars,

inter connecting mains & Copper Aluminium strips,

meters, Fuses etc. The dimension shall be measured

excluding base beams) The panel shall be supplied

with following approved manufacturers with following

size. (A) The standard companies switch gear shall be

used and only manufacturers at CPRI approved factory Sq

for beneficial use. (i) with 350mm depth 2.00 Mtr. 10468.65

86 Providing and erecting water cooler having storage

capacity 80Ltr. & cooling capacity 40 Ltr. per hour @ an

ambient temp of 450 C. The outlet temp. of the water

should drop by 150 C within a hour, The water cooler

should be comprising of hermetically sealed compressor,

fan motor, condensing unit, water tank surrounded by

evaporating coil, thermostats, relay etc. complete with

necessary inlet & outlet connection. The body of water

cooler will be made from Stainless Steel. 1.00 Each 49559.69

87 Supplying & erecting 5 stage single reverse osmosis water

purification system with M.S. powder coated frame,

prefilter housing with 'O' ring presediment filter GAC

filter, carbon filter suitable buster DC pump capacity

psi, mention with 40 Osg inline type post carbon filter

auto low & high pressure switches with following size of

storage tank & LPH capacity & erected as directed with

one year comprehensive maintenance guarantee.[B]

Ltr / Hr with 30 Ltr. S.S. Pressure Tank 1.00 Each 15620.66

88 Providing and erecting approved make split air-

conditioning unit consisting of copper condensing unit

with fan motor, hermetically sealed rotary compressor

with accessories etc. duly connected separately erected

evaporating unit and blower motor with its accessories

by means of extra supplied proper insulated copper

tubing, drain PVC pipes suitable for (cost includes powder

coated Stand, Eco Friendly green gas charging, 15A plug

top & Remote Control) with necessary core cutting. 6.00 Each 36819.55

(A) For 3 star Rating

(1)For ISEER Range (KWH/KWH)(3.1 to 3.99)

(b) For 1.5 TR A.C. Machine

89 Supplying & erecting approved make self-priming

domestic mono block water pump with 1 H.P motor,

suitable for operation on 230 volts, 50c/s. AC supply with

metallic flange, and M.S. impeller delivery and following

discharge (a) 40 LPM at 24 Mtr. Head suitable for 25mm

dia. Delivery Cat. III 1.00 Each 7679.03

90 Providing and erecting ISI marked PVC insulated PVC

Sheathed Flat flexible Submersible copper cable

approved make of following Size. (B) 3 Core x 2.5 Sq. mm. 40.00 Mtr. 104.03

91 Supplying & erecting ISI Marked (Embossed) following

size of “B” Class G.I. Pipe & erecting as directed by

Engineer-in-charge with necessary plumbing as desired.

(A) 25 mm dia 1.00 Mtr. 130.29

92 Supplying & erecting G.l. bend for pipe connections

suitable for (A) 25 mm (1") 1.00 No 64.64

93 Supplying & erecting ISI Marked G.l. Elbow for pipe

connections suitable for (A) 25 mm (1") 1.00 No 44.44

94 Supplying and Installation of Prama/CP Plus/Hikvision

16 CH HDTVI 265+ 2MP Support DVR as per direction

by engineer in charge. 1.00 No 15352.00

95 Supplying of Prama/CP Plus/Hikvision 2 MP HDTVI

OUTDOOR WDR BULLET CAMERA as per direction by

engineer in charge. 6.00 No 4848.00

96 Supplying and Installation of Seagate 2TB AVGP HDD

as per direction by engineer in charge. 1.00 No 7575.00

97 Supplying and Installation of ERD 16CH CAMERA SMPS

as per direction by engineer in charge. 1.00 No 3232.00

98 Supply and Installation of 4x4 camera gain box as per

direction by engineer in charge. 6.00 No 303.00

99 Supply and Installation of 4U rack for DVR as per

direction by engineer in charge. 1.00 No 7575.00

100 Installation of Camera as per direction by engineer in

charge. 6.00 No 505.00

101 Providing And Supplying 3+1 CCTV Camera cable As

per Direction of engineer in charge. 250.00 Rmt 30.30

/We am/are willing to carry out the work at % above/below percent (should be written in figures and words) of the tendered amount

mentioned above.

Tendered amount put to tender Rs. 41,30,874.00 Tendered amount put to tender Rs.

Deduct. % below Rs. Add.: % Above Rs.

President, Chief Officer

Signature of Contractor. Talala Nagarpalika Talala Nagarpalika