Repairs to toilets and bathrooms electrification doors and windows painting roof and flooring at govt BC Girls hostel at ravikamatham mandal

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work.

Plain Cement Concrete (1:4:8) using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work

Filling with useful available exacavated earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Footings.

VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Columns.

Random Rubble stone masonry in CM (1:8) using hard variety of Granite stones from approved quarry including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for foundation and basement.

VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth Beam.

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sqm for walls for Superstructure walls.

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) (Sno. 55 of std. data)

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls.

Supplying, fixing and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for bars below 36mm dia. Including overlaps and wastage where they are not welded.

Cost, Supply, fabrication and fixing of MS iron gate using MS Angles, Pipes and Squares including cost and conveyance of all materials , Fabrication, welding and placing in position etc complete for one kg of finished item of work

Painting to new Iron work with Two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat of Red Oxide primer thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, all operational, incidental and labour charges etc., complete for finished item of work.

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 225 x 100 x 60 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sqm for walls for Superstructure walls.

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Ornamental plastering to ceiling with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.

Flooring with Nano polished/ stain free soluble salt porcelain Vitrified tiles screen printed of size 600x600mm and thickness between 8-10mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/ risers of steps with high polished granite slabs 16 to 18mm thick other than black, length equal to flooring stones set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like granite slabs, cement, sand and water etc., complete for finished item of work.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 no.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Providing and fixing 28-30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.

Supply and run of 1 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly recessed in wall with wooden deep box of 6"x8"x21/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.

Supply and fixing of 6A 3 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing SPN Distribution board with IP-42 protection (Metal Door) suitable for single phase ELCB / RCCB / DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface/ flush mounting etc., complete.

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category II.

Supply of 1200mm (48") Sweep 230V, A.C 50 Hz Ceiling Fan with 3 blades and double ball bearings with all standard accseeories.

Supply of stepped type electronic Regulator for Ceiling Fan with all standard accseeories.

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supplying, fitting and placing MS grilled door, windows including cost and conveyance of all materials and all labour charges etc., complete.

Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM (white powder coated) touch locks with hook, gasket, wool pile, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls.

Estimated Contract Value (ECV) put in to Tender in Rs.

The Total Tender Contract Value (ECV) items (01) to (20) of the work "Repair to Toilets & Bathrooms,Electrification,Doors & windows ,Painting.Roof & Flooring at Government BC Girls Hostel at Ravikamatham Mandal." is for Rs.9,29,862 /- (Rupees Nine lakhs twenty nine thousand eight hundred sixty two)

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for columns of F.F

Earth work excavation for foundations of buildings in ordinary soils and depositing on bank with an intial lead of 10m and depth upto 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage excluding dewatering charges etc.

PCC (1:4:8) using 40mm nominal size SS5 gauge hard broken granite metal as per SS 108, machine mixed laid in position in layers not exceeding 15cm in thickness, including cost, seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as mixing concrete, laying, tamping, curing, etc. complete for finished item of work as per SS 402 for foundations and flooring bed.

PCC (1:5:10) using 40mm nominal size SS5 gauge hard broken granite metal as per SS 108, machine mixed laid in position in layers not exceeding 15cm in thickness, including cost, seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as mixing concrete, laying, tamping, curing, etc. complete for finished item of work as per SS 402 for foundations and flooring bed.

Random Rubble stone masonry in CM (1:6) using hard variety of Granite stones from approved quarry including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for foundation and basement.

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Footings

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Pedestals

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Plinth Beams

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for columns of G.F

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Beams G.F

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slab 125mm thick G.F

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Waist Slab 175mm thick G.F

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.GF

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.FF

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for lintels

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for 75mm thick at fixed end & 50mm thick at free end with an average thickness of 62.5 mm etc., complete Sunshades G.F

Filling carted gravel in trenches, sides of foundations, basement etc. from approved quarry/ available sources in layers not exceeding 15cm. thick, consolidating each deposited layer by watering and ramming, including cost, seignorage charges and conveyance, water to work site and all operational, incidental, labour charges, etc. complete for finished item of work as per SS 309 and 310.

Refilling with useful available excavated earth in trenches, sides of foundations, basement with initial lead in layers not exceeding 15cm. thick, consolidating each deposited layer by watering and ramming, including cost, seignorage charges and conveyance, water to work site and all operational, incidental, labour charges, etc. complete for finished item of work

Plain Cement Concrete (1:2:4) prop. nominal mix size using 20mm hard broken graded granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work (APSSNo.402)

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM(1:6) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for internal surfacaes. (SS 901,903 & 904) (For Internal surfaces) for GF

Plastering 12mm thick in two coats with base coat of 8mm thick in CM(1:6) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for internal surfacaes. (SS 901,903 & 904) (For Internal surfaces) Plastering Internal FF.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for External surfacaes.(SS 901,903 & 904) for GF

Plastering 20mm thick in two coats with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for External surfacaes.(SS 901,903 & 904) for FF.

Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Flooring with Vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/ risers of steps with vitrified tiles length equal to flooring stones set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.

Dadooing to walls with ISO glazed red or white full body ceramic wall tiles of Size 200 x 300 mm / 245 mm x 325 mm and thickness 6mm and 1st quality set over 12mm thick CM (1:3) base coat and neat grey cement slurry of honey like consistency spread at the rate of 3.3 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to match the shade of tiles including cost and of all materials and water to work site, including cost of seigniorage charges on all materials and all operational, incidental, and labour charges such as mixing mortar, fixing in position, including lift charges, curing, etc.,complete for finished item of work.

Flooring with Non-Skid ceramic tiles of 7-8 mm thick, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, .

Roofing with 6mm Thick Corrugated A.C Sheets fixing with G.I J bolts & Nuts 8mm Dia G.I Plain washers Etc Including Scenary Charger etc Completed and excluding cost of purlings etc.

Mild Steel Tubes & pipes of all diameters as per IS-1161 indian standard as per all MS materials etc & fixing of 40mm dia mild steel pipes including cost and conveyance of all materials and all labour charges etc complete finished item of work.

Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for internal walls in GF

Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for external walls in GF. (APSS No. 912)

Painting to new wood work with Two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat of primer with luppam finishing thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, all operational, incidental and labour charges etc., complete for finished item of work in GF

Providing and fixing factory made Rajasri or equivalent polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work

Supply and Fixing of Door with Double leaf shutter of size 1.20x2.10 mtrs with Sal wood /Country wood frame of section size 75x100mm with Flush Door shutter solid bond wood block board type with commercial fly on both faces of 35mm thick including cost of fixtures, sales and other taxes, cost and conveyance of all materials to site and all labour charges such as fixing door Frame and shutter, fixing in position with hardware fixtures etc., complete for finished item of work.

Providing and fixing of openable windows with Fly-mesh made of pre - painted steel (base steel as per IS 513 of 0.58mm thick, galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72x55mm, center mullion should be of 48x50mm, centre mullion of 72x50mm, section for fixed glass beading section of 12x12mm and section for shutters of 48x25mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20mm provision for guard bars/grills and fly mesh shutter section of 20x40mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S.Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws including 10mm square guard bars with 6" (152.4mm)pitch, complete for finished item of work (centre fixed both side openable shutter window 5'0"x4'0" (1524mmx1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 48x25mm. Mullion section size of 72x50mm. Fixed beading section size of 12x12mm) (BMT-P.24)

Supply, fitting and placing HYSD bar reinforcement as per Fe 415 grade as per IS 1786-1979 and mild steel bars (Fe 250 grade as per IS 432 ) in RCC work complete as per drawings and tecnical specification for bars below 36mm including over laps and wastages where they are not welded and tying with binding wire of 20 SWG, formining grills for reinforcement work cost and conveyance of binding wire,cover blocks and all incidental,operationl,labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.

Supply and fixing of ISI mark 25mm dia 1.55mm thick PVC conduit pipe Sudhakar / Macoplast / Modi make concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary, including necessary masonery work for light/fan pointand seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.

Supply and fixing of 25mm dia 2.00mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete, including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.

Supply and fixing of 6A 5 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work.

Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly recessed in wall with wooden deep box of 6"x8"x21/2" size covered with hylam sheet including earth connections and all labour charges etc., complete. including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Supply and fixing 4 way TPN Distribution board with IP-43 protection of make Siemens / GE/ ABB/ GM /Standard/ Havells / HPL / Hager suitable for single phase 40A Double pole Isolator as incomer and 10KA-6-32A range single pole miniature circuit breakers four numbers (4Nos) as out going with internal connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges etc., complete.including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Supply and run of 2 of 56/0.3mm (4.0 sqmm) FRLS / HFFR PVC insulated ISI Copper cable of makes KEI / Polycab/ Havells /GM / Million/ HPL / Gold Medal / Power Flex/ RPG/ Anchor / Sun Cab / Fortune Art / Great white in existing metallic / non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Providing independent earthing by excavating a trench to a depth of 2.1m in all soils as per size specified in the data using 40mm dia Bclass GI pipe 2.5 Mtr length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc., complete

Supply and fixing of CFL Lamps 13/14W to batton/ pendant holder with all cost, convyance of material labour charges etc. complete.

Supply of 1200mm (48") Sweep 230V, A.C 50 Hz Ceiling Fan with 3 blades and double ball bearings with all standard accseeories including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Supply and fixing of 1x40W patty type tube light luminaire with copper choke, starter etc., including 1 No. 40W tube etc., complete, including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Supply and fixing of modular socket type Electronioc (humfree) regulator with cost and conveyance of all materials and labour charges etc complet with connection as per departmental approved.

Supplying and laying, filling, jointing and testing SWG pipes 1st quality with air tight cement joints in CM (1:5:1) prop.including excavation of trenches and sockets pits in any soil (except rock requiring blasting) and refilling with watering and tamping of 101.60mm (4") dia SWG pipe upto 3' depth

Supplying and laying, filling, jointing and testing SWG pipes 1st quality with air tight cement joints in CM (1:5:1) prop.including excavation of trenches and sockets pits in any soil (except rock requiring blasting) and refilling with watering and tamping of 152.40mm (6") dia SWG pipe upto 3' depth

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.

Supplying & fixing 76.2mm (3'')PVC/SWG Nahany traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating black painted for all floors including cost and conveyance of all materials to site , labour charges etc., complete for finished item of work

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer - ISI Mark: 580 mm x 440 mm

Supply & fixing white glazed european water closet with variety as approved by Engineer-in-charge, P" or S" trap with 4" CI outlet pipe of approved make,plastic seat and lid for EWC and rubber buffers as per ISI 2548 1963 with and 10 lits capacity PVC slimline low level flush tank of approved make with internal components and fixed with wooden gutties with required size nails,32mm dia short CP bend,12mm PVC Connections with brass union nuts and 12.70 mm (1/2") NP stop cock heavy duty (300 grams) complete including cost and conveyance of all materials to site,for finished item of work for all floors.

Providing & Fixing (559x406mm)22''x16'' size Indian make white gazed porcelain Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with 12.70mm double NP pillar cock (400)grams Ist quality 1 No. 32 mm dia C.P. waste couplings CI brackets 1No. 12.7mmNP stop cock (300 grams) 1No. 12.70mmPVC connection with brass union nuts, wooden blocks with drain pipe of 11/4'' dia pvc pipe of required length including cost and conveyance of all materials to site labour charges etc., complete for finished item of work.

Supplying and fixing of soap dish NP screws etc, complete including cost and conveyance of all materials labour charges complete for finished item of work in all floors.

S & F concealed stop cock 12.7 mm (1/2") Indian Make 400 grams Seiko / Senior / Nice or equivalent

S&F 12.7 mm N.P bib tap Indian make 400 grams Seiko / Senior / Nice or equivalent

S & F CP Long body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent

Supplying and fixing GI Union 1st quality including cost and conveyance of all materials and labour charges etc, complete for GI union 19.05 mm Ist Quality

Supplying and fixing GI Union 1st quality including cost and conveyance of all materials and labour charges etc, complete for GI union 25.4 mm Ist Quality

Supplying and fixing GI Union 1st quality including cost and conveyance of all materials and labour charges etc, complete for GI union 38.15 mm Ist Quality

S & F 25.4 mm copper ball cock ith PVC ball Indian make ISI mark

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 20 mm NB Size

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 40 mm NB Size

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water for OD Pipe 15.9 mm dia

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water for 22.2mm dia OD Pipe

Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 10 Litres capacity Single Flush

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Earth work excavation for foundations of buildings in ordinary soils and depositing on bank with an intial lead of 10m and depth upto 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage excluding dewatering charges etc.

Sand filling in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

PCC (1:4:8) using 40mm nominal size SS5 gauge hard broken granite metal as per SS 108, machine mixed laid in position in layers not exceeding 15cm in thickness, including cost, seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as mixing concrete, laying, tamping, curing, etc. complete for finished item of work as per SS 402 for foundations and flooring bed.

Vibrated Reinforced Cement Concrete M-20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Bottam Slab , Side Walls & cover slabs for septic tank

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Brick masonry in CM (1:6) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Basement.

Supply, fitting and placing HYSD bar reinforcement as per Fe 415 grade as per IS 1786-1979 and mild steel bars (Fe 250 grade as per IS 432 ) in RCC work complete as per drawings and tecnical specification for bars below 36mm including over laps and wastages where they are not welded and tying with binding wire of 20 SWG, formining grills for reinforcement work cost and conveyance of binding wire,cover blocks and all incidental,operationl,labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.

Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Supply of SWG SP-1 Pipe Conforming to ISI 651-4" dia (101.6mm) (BMW-A-15)

110 mm dia 3 M Single Socket PVC/SWR pipe - 4kg/sqm (BMW-G-16)

110 mm dia- Single "Y" - UPVC/SWR pipe fittings (BMW-G-84)

Supply of SWG Bends conforming to IS standards - 100 mmdia BMW-A-39

110 mm dia - Single Tee with Door - UPVC/SWR pipe fittings BMW-G-78

110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR pipe fittings BMW-G-57

110 mm dia - 45 Degree Bend - UPVC/SWR pipe fittings BMW-G-63

75 mm dia 3 M Single Socket PVC/SWR pipe - 4kg/sqm BMW-G-11

75 mm dia- Single "Y" - UPVC/SWR pipe fittings BMW-G-79

75 mm dia - Single Tee with Door - UPVC/SWR pipe fittings BMW-G-70

75 mm dia - 87.5 Degree Bend - UPVC/SWR pipe fittings BMW-G-61

110 mm dia - 45 Vent Cowl - UPVC/SWR pipe fittings BMW-G-100

75 mm dia - 45 Vent Cowl - UPVC/SWR pipe fittings BMW-G-98

Supply and utilisation of 210 mm dia UPVC 10kg/sq.mmcasing pipe of class 3 ( 6 kg/cm2) for bore wells for potable water supply confirming to IS 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions and specification.

Supply and utilisation of 180 mm dia UPVC casing pipe of class 3 ( 6 kg/cm2) for bore wells for potable water supply confirming to IS 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions and specification.

Supply and Transportation of 1.50HP 10 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well.Makes: Kirloskar / Crompton / KSB / Texmo /Aryan Varsha. (ELEC-5.4.6, PAGE NO: 270)

Supply & Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct-on-Line LTLK / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete (ELEC-5.4.64, PAGE NO:276)

Supply of 3 Core 2.5 Sqmm Flat Copper cable as per IS694:1990 for Submersible Motors of makes Polycab / GoldMedal / Million / Payal / Havells / Nakoda. (ELEC-1.6.10, PAGE NO: 203)

Manufacture, Supply, & Delivery of HDPE Pipe 32mm dia 12.5 Kg/Sq.cm conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)

Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work.

Plain Cement Concrete (1:4:8) using 40mm nominal size SS5 hard broken granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work

Filling with useful available exacavated earth in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including all operational, incidental labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Footings.

VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Columns.

Random Rubble stone masonry in CM (1:8) using hard variety of Granite stones from approved quarry including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for foundation and basement.

VRCC M20 Nominal mix (Cement:Fine aggregate:Coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate, coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing, centering, shuttering etc., complete but excluding cost of steel and its fabrication charges for finished item of work for Plinth Beam.

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sqm for walls for Superstructure walls.

Plastering 12mm thick in single coat in CM(1:5) for even surfaces including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., complete for finished item of work(APSS No. 901 & 903) (Sno. 55 of std. data)

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls.

Supplying, fixing and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications for bars below 36mm dia. Including overlaps and wastage where they are not welded.

Cost, Supply, fabrication and fixing of MS iron gate using MS Angles, Pipes and Squares including cost and conveyance of all materials , Fabrication, welding and placing in position etc complete for one kg of finished item of work

Painting to new Iron work with Two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat of Red Oxide primer thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, all operational, incidental and labour charges etc., complete for finished item of work.

Masonry work in CM (1:8) prop with Flyash Cement solid blocks of size 225 x 100 x 60 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs, Gypsum of 5 kgs and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sqm for walls for Superstructure walls.

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Ornamental plastering to ceiling with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.

Flooring with Nano polished/ stain free soluble salt porcelain Vitrified tiles screen printed of size 600x600mm and thickness between 8-10mm 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/ risers of steps with high polished granite slabs 16 to 18mm thick other than black, length equal to flooring stones set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like granite slabs, cement, sand and water etc., complete for finished item of work.

Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of size with encapsulation of 8MM rigid layer on all the six surfaces. The door frame will have a rebat of 32MM. Door Frame section of 63.5x100 MM . The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine. The ready/assembled door frame is fixed to the wall using hold fast or bolt fasteners. A minimum of 4 no.s of screws to be provided for each vertical member & minimum 2no.s for horizontal member. Providing and fixing 28-30 MM thick solid Wood Polymer Composite (WPC) single extruded door shutter with 3MM top and bottom rigid layer with an overall density of 750kg/Cum. including labour charges for fixing the frame in position, fixing the shutter to the frame etc., complete for finished item of work.

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.

Supply and run of 1 of 36/0.3mm (2.5 Sq.mm) F.R P.V.C. insulated flexible copper cable in existing pipe for earth continuity inlcuding all labour charges etc., complete.

Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly recessed in wall with wooden deep box of 6"x8"x21/2" size covered with hylam sheet including earth connections and all labour charges etc., complete.

Supply and fixing of 6A 3 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Supply and fixing SPN Distribution board with IP-42 protection (Metal Door) suitable for single phase ELCB / RCCB / DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface/ flush mounting etc., complete.

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220 - 260 Volts, having luminous efficacy >100 lumens/ watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category II.

Supply of 1200mm (48") Sweep 230V, A.C 50 Hz Ceiling Fan with 3 blades and double ball bearings with all standard accseeories.

Supply of stepped type electronic Regulator for Ceiling Fan with all standard accseeories.

Labour charges for fixing of ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.

Supplying, fitting and placing MS grilled door, windows including cost and conveyance of all materials and all labour charges etc., complete.

Providing and fixing factory made UPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVCprofile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM (white powder coated) touch locks with hook, gasket, wool pile, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screwsetc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge inclusive of cost of Single / double glass panes, wire mesh and silicon sealent .

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for internal walls

Painting to walls with two coats of acrylic emulsion paint of approved brand and shade over a base coat of approved cement primer of exterior grade-2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for external walls.

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for columns of F.F

Earth work excavation for foundations of buildings in ordinary soils and depositing on bank with an intial lead of 10m and depth upto 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage excluding dewatering charges etc.

PCC (1:4:8) using 40mm nominal size SS5 gauge hard broken granite metal as per SS 108, machine mixed laid in position in layers not exceeding 15cm in thickness, including cost, seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as mixing concrete, laying, tamping, curing, etc. complete for finished item of work as per SS 402 for foundations and flooring bed.

PCC (1:5:10) using 40mm nominal size SS5 gauge hard broken granite metal as per SS 108, machine mixed laid in position in layers not exceeding 15cm in thickness, including cost, seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as mixing concrete, laying, tamping, curing, etc. complete for finished item of work as per SS 402 for foundations and flooring bed.

Random Rubble stone masonry in CM (1:6) using hard variety of Granite stones from approved quarry including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for foundation and basement.

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Footings

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Pedestals

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Plinth Beams

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for columns of G.F

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Beams G.F

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Roof Slab 125mm thick G.F

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for Waist Slab 175mm thick G.F

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.GF

Brick masonry in CM (1:8) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Superstructure.FF

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work. for lintels

Supply and placing of the Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for 75mm thick at fixed end & 50mm thick at free end with an average thickness of 62.5 mm etc., complete Sunshades G.F

Filling carted gravel in trenches, sides of foundations, basement etc. from approved quarry/ available sources in layers not exceeding 15cm. thick, consolidating each deposited layer by watering and ramming, including cost, seignorage charges and conveyance, water to work site and all operational, incidental, labour charges, etc. complete for finished item of work as per SS 309 and 310.

Refilling with useful available excavated earth in trenches, sides of foundations, basement with initial lead in layers not exceeding 15cm. thick, consolidating each deposited layer by watering and ramming, including cost, seignorage charges and conveyance, water to work site and all operational, incidental, labour charges, etc. complete for finished item of work

Plain Cement Concrete (1:2:4) prop. nominal mix size using 20mm hard broken graded granite metal including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc., complete for finished item of work (APSSNo.402)

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Plastering 12mm thick in two coats with base coat of 8mm thick in CM(1:6) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for internal surfacaes. (SS 901,903 & 904) (For Internal surfaces) for GF

Plastering 12mm thick in two coats with base coat of 8mm thick in CM(1:6) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for internal surfacaes. (SS 901,903 & 904) (For Internal surfaces) Plastering Internal FF.

Plastering 20mm thick in two coats with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for External surfacaes.(SS 901,903 & 904) for GF

Plastering 20mm thick in two coats with base coat of 16mm thick in CM(1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting Grooves as directed by Engineer-in-charge etc., complete for finished item of work for External surfacaes.(SS 901,903 & 904) for FF.

Ceiling plastering with CM (1:3), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete.

Flooring with Vitrified tiles of 1st quality, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC Roof slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete for finished item of work.

Providing skirting to internal walls to 15 cm height/ risers of steps with vitrified tiles length equal to flooring stones set over base coat of CM (1:5) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work.

Dadooing to walls with ISO glazed red or white full body ceramic wall tiles of Size 200 x 300 mm / 245 mm x 325 mm and thickness 6mm and 1st quality set over 12mm thick CM (1:3) base coat and neat grey cement slurry of honey like consistency spread at the rate of 3.3 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to match the shade of tiles including cost and of all materials and water to work site, including cost of seigniorage charges on all materials and all operational, incidental, and labour charges such as mixing mortar, fixing in position, including lift charges, curing, etc.,complete for finished item of work.

Flooring with Non-Skid ceramic tiles of 7-8 mm thick, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work, .

Roofing with 6mm Thick Corrugated A.C Sheets fixing with G.I J bolts & Nuts 8mm Dia G.I Plain washers Etc Including Scenary Charger etc Completed and excluding cost of purlings etc.

Mild Steel Tubes & pipes of all diameters as per IS-1161 indian standard as per all MS materials etc & fixing of 40mm dia mild steel pipes including cost and conveyance of all materials and all labour charges etc complete finished item of work.

Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for internal walls in GF

Painting to new walls with Two coats of plastic emulsion paint of approved brand and shade over a base coat of approved cement primer grade I making Three coats in all to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc., complete for finished item of work as per SS911 for external walls in GF. (APSS No. 912)

Painting to new wood work with Two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat of primer with luppam finishing thouroughly brushing the surface to remove all remains including cost and conveyance of all materials to site, all operational, incidental and labour charges etc., complete for finished item of work in GF

Providing and fixing factory made Rajasri or equivalent polyvinyl chloride (PVC) Door Frame of the size 50 x 47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2nos. of 150mm long brackets of 15x15mm M.S. square tube. The two vertical door profiles are to be reinforced with 19x19mm M.S. Square tube of 19 gauge. The door frame shall be fixed to the wall using 65/100mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4nos. of screws to be provided for each vertical member & minimum 2nos. for horizontal member etc. complete as per manufacturers specification and direction of Engineer-in-Charge for finished item of work

Supply and Fixing of Door with Double leaf shutter of size 1.20x2.10 mtrs with Sal wood /Country wood frame of section size 75x100mm with Flush Door shutter solid bond wood block board type with commercial fly on both faces of 35mm thick including cost of fixtures, sales and other taxes, cost and conveyance of all materials to site and all labour charges such as fixing door Frame and shutter, fixing in position with hardware fixtures etc., complete for finished item of work.

Providing and fixing of openable windows with Fly-mesh made of pre - painted steel (base steel as per IS 513 of 0.58mm thick, galvanized as per IS 277 with zinc of 150 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer and the section for outer frame of 72x55mm, center mullion should be of 48x50mm, centre mullion of 72x50mm, section for fixed glass beading section of 12x12mm and section for shutters of 48x25mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20mm provision for guard bars/grills and fly mesh shutter section of 20x40mm and the sections cut to length metre joined with corner bracket, centre mullions fixed with mullion cap, stay, handles, latch 2 nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and S.S.Mesh for fly mesh shutter (304 grade), fitted using rubber gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws including 10mm square guard bars with 6" (152.4mm)pitch, complete for finished item of work (centre fixed both side openable shutter window 5'0"x4'0" (1524mmx1219.2mm). Outer frame section size of 72x50mm. Shutter frame section size of 48x25mm. Mullion section size of 72x50mm. Fixed beading section size of 12x12mm) (BMT-P.24)

Supply, fitting and placing HYSD bar reinforcement as per Fe 415 grade as per IS 1786-1979 and mild steel bars (Fe 250 grade as per IS 432 ) in RCC work complete as per drawings and tecnical specification for bars below 36mm including over laps and wastages where they are not welded and tying with binding wire of 20 SWG, formining grills for reinforcement work cost and conveyance of binding wire,cover blocks and all incidental,operationl,labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.

Supply and fixing of ISI mark 25mm dia 1.55mm thick PVC conduit pipe Sudhakar / Macoplast / Modi make concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary, including necessary masonery work for light/fan pointand seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.

Supply and fixing of 25mm dia 2.00mm thick P.V.C. pipe (ISI Mark) concealed in wall with all required accessories including masonary work and labour charges etc., complete, including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm tick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential buildings.

Supply and fixing of 6A 5 pin wall plug socket with a 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work.

Supply and fixing of 16A 3pin flush type switch socket combined (2 in 1) duly recessed in wall with wooden deep box of 6"x8"x21/2" size covered with hylam sheet including earth connections and all labour charges etc., complete. including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Supply and fixing 4 way TPN Distribution board with IP-43 protection of make Siemens / GE/ ABB/ GM /Standard/ Havells / HPL / Hager suitable for single phase 40A Double pole Isolator as incomer and 10KA-6-32A range single pole miniature circuit breakers four numbers (4Nos) as out going with internal connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work.

Supply and run of 2 of 36/0.3mm (2.5 Sq.mm) F.R. P.V.C. insulated flexible copper cable in existing pipe for mains including all labour charges etc., complete.including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Supply and run of 2 of 56/0.3mm (4.0 sqmm) FRLS / HFFR PVC insulated ISI Copper cable of makes KEI / Polycab/ Havells /GM / Million/ HPL / Gold Medal / Power Flex/ RPG/ Anchor / Sun Cab / Fortune Art / Great white in existing metallic / non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

Providing independent earthing by excavating a trench to a depth of 2.1m in all soils as per size specified in the data using 40mm dia Bclass GI pipe 2.5 Mtr length with necessary accessories with hume pipe ring duly providing staggered holes including filling with equal proportion of salt and charcoal in layers and all labour charges etc., complete

Supply and fixing of CFL Lamps 13/14W to batton/ pendant holder with all cost, convyance of material labour charges etc. complete.

Supply of 1200mm (48") Sweep 230V, A.C 50 Hz Ceiling Fan with 3 blades and double ball bearings with all standard accseeories including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Supply and fixing of 1x40W patty type tube light luminaire with copper choke, starter etc., including 1 No. 40W tube etc., complete, including over heads and contractors profit but excluding seigniorage charges and GST for finished item of work

Supply and fixing of modular socket type Electronioc (humfree) regulator with cost and conveyance of all materials and labour charges etc complet with connection as per departmental approved.

Supplying and laying, filling, jointing and testing SWG pipes 1st quality with air tight cement joints in CM (1:5:1) prop.including excavation of trenches and sockets pits in any soil (except rock requiring blasting) and refilling with watering and tamping of 101.60mm (4") dia SWG pipe upto 3' depth

Supplying and laying, filling, jointing and testing SWG pipes 1st quality with air tight cement joints in CM (1:5:1) prop.including excavation of trenches and sockets pits in any soil (except rock requiring blasting) and refilling with watering and tamping of 152.40mm (6") dia SWG pipe upto 3' depth

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.

Supplying & fixing 76.2mm (3'')PVC/SWG Nahany traps 1st quality ISI marked conforming to IS:1729-1979 with C.P. Grating black painted for all floors including cost and conveyance of all materials to site , labour charges etc., complete for finished item of work

Supplying & Fixing Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer - ISI Mark: 580 mm x 440 mm

Supply & fixing white glazed european water closet with variety as approved by Engineer-in-charge, P" or S" trap with 4" CI outlet pipe of approved make,plastic seat and lid for EWC and rubber buffers as per ISI 2548 1963 with and 10 lits capacity PVC slimline low level flush tank of approved make with internal components and fixed with wooden gutties with required size nails,32mm dia short CP bend,12mm PVC Connections with brass union nuts and 12.70 mm (1/2") NP stop cock heavy duty (300 grams) complete including cost and conveyance of all materials to site,for finished item of work for all floors.

Providing & Fixing (559x406mm)22''x16'' size Indian make white gazed porcelain Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 with 12.70mm double NP pillar cock (400)grams Ist quality 1 No. 32 mm dia C.P. waste couplings CI brackets 1No. 12.7mmNP stop cock (300 grams) 1No. 12.70mmPVC connection with brass union nuts, wooden blocks with drain pipe of 11/4'' dia pvc pipe of required length including cost and conveyance of all materials to site labour charges etc., complete for finished item of work.

Supplying and fixing of soap dish NP screws etc, complete including cost and conveyance of all materials labour charges complete for finished item of work in all floors.

S & F concealed stop cock 12.7 mm (1/2") Indian Make 400 grams Seiko / Senior / Nice or equivalent

S&F 12.7 mm N.P bib tap Indian make 400 grams Seiko / Senior / Nice or equivalent

S & F CP Long body bib cock fancy type deluxe 400 grams 12.7 mm dia Indian make Seiko/ Senior/ Nice or equivalent

Supplying and fixing GI Union 1st quality including cost and conveyance of all materials and labour charges etc, complete for GI union 19.05 mm Ist Quality

Supplying and fixing GI Union 1st quality including cost and conveyance of all materials and labour charges etc, complete for GI union 25.4 mm Ist Quality

Supplying and fixing GI Union 1st quality including cost and conveyance of all materials and labour charges etc, complete for GI union 38.15 mm Ist Quality

S & F 25.4 mm copper ball cock ith PVC ball Indian make ISI mark

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 25 mm NB Size

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 20 mm NB Size

S & F Gunmetal Gate (GM peet) valve as per IS - 778 Class - I, Indian make heavy type - 40 mm NB Size

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water for OD Pipe 15.9 mm dia

Supply and Fixing of Premium make CPVC Pipes and Fittings to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" ton 2" Ashirvad Flowgurard SDR 11 and SDR 13.5 pipes are made from idential CPVC compounds having the same physical Properties for Hot and Cold Water for 22.2mm dia OD Pipe

Supply & fixing of PVC low level system parry ware, slim line with internal components & short bend: 10 Litres capacity Single Flush

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

Earth work excavation for foundations of buildings in ordinary soils and depositing on bank with an intial lead of 10m and depth upto 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., complete for finished item of work including seigniorage excluding dewatering charges etc.

Sand filling in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., complete for finished item of work.

PCC (1:4:8) using 40mm nominal size SS5 gauge hard broken granite metal as per SS 108, machine mixed laid in position in layers not exceeding 15cm in thickness, including cost, seignorage charges and conveyance of all materials and water from approved sources to work site and all operational, incidental, labour charges such as mixing concrete, laying, tamping, curing, etc. complete for finished item of work as per SS 402 for foundations and flooring bed.

Vibrated Reinforced Cement Concrete M-20 Nominal Mix as per Table 9 of IS 456 using 20mm size (SS5) hard granite machine crushed graded metal (Coarse aggregate) from approved quarry, including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering using Casurina ballies, Bamboos, Wooden reepers, Runners, Wooden posts, Wall plates etc., as per the approved shuttering plan, machine mixing, laying concrete, vibrating, lift charges, curing etc., complete but excluding cost of steel and it’s fabrication charges for finished item of work (APSS No. 402 & 403) Bottam Slab , Side Walls & cover slabs for septic tank

Providing Impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost and conveyance of all materials all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc., complete for finished item of work.

Brick masonry in CM (1:6) with bricks of traditional size 23 x 11 x 7 cm 2nd class including cost and conveyance of all materials and all labour charges etc., complete for finished item of work for Basement.

Supply, fitting and placing HYSD bar reinforcement as per Fe 415 grade as per IS 1786-1979 and mild steel bars (Fe 250 grade as per IS 432 ) in RCC work complete as per drawings and tecnical specification for bars below 36mm including over laps and wastages where they are not welded and tying with binding wire of 20 SWG, formining grills for reinforcement work cost and conveyance of binding wire,cover blocks and all incidental,operationl,labour charges such as cutting, bending, placing in position, tying etc., complete for finished item of work.

Plastering with CM (1:5), 12mm thick including cost and conveyance of all materials and all labour charges etc., complete for walls.

Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg.

Constructing 904.0 mm (3’0”) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mmincluding plastering with cement mortar 1:3 prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification andincluding cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental andoperational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Supply of SWG SP-1 Pipe Conforming to ISI 651-4" dia (101.6mm) (BMW-A-15)

110 mm dia 3 M Single Socket PVC/SWR pipe - 4kg/sqm (BMW-G-16)

110 mm dia- Single "Y" - UPVC/SWR pipe fittings (BMW-G-84)

Supply of SWG Bends conforming to IS standards - 100 mmdia BMW-A-39

110 mm dia - Single Tee with Door - UPVC/SWR pipe fittings BMW-G-78

110 mm dia - Plain Bend 87.5 Degree - UPVC/SWR pipe fittings BMW-G-57

110 mm dia - 45 Degree Bend - UPVC/SWR pipe fittings BMW-G-63

75 mm dia 3 M Single Socket PVC/SWR pipe - 4kg/sqm BMW-G-11

75 mm dia- Single "Y" - UPVC/SWR pipe fittings BMW-G-79

75 mm dia - Single Tee with Door - UPVC/SWR pipe fittings BMW-G-70

75 mm dia - 87.5 Degree Bend - UPVC/SWR pipe fittings BMW-G-61

110 mm dia - 45 Vent Cowl - UPVC/SWR pipe fittings BMW-G-100

75 mm dia - 45 Vent Cowl - UPVC/SWR pipe fittings BMW-G-98

Supply and utilisation of 210 mm dia UPVC 10kg/sq.mmcasing pipe of class 3 ( 6 kg/cm2) for bore wells for potable water supply confirming to IS 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions and specification.

Supply and utilisation of 180 mm dia UPVC casing pipe of class 3 ( 6 kg/cm2) for bore wells for potable water supply confirming to IS 4985/1988 as amended from time to time including revisions if any and confirming to technical conditions and specification.

Supply and Transportation of 1.50HP 10 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well.Makes: Kirloskar / Crompton / KSB / Texmo /Aryan Varsha. (ELEC-5.4.6, PAGE NO: 270)

Supply & Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct-on-Line LTLK / SIEMENS / CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete (ELEC-5.4.64, PAGE NO:276)

Supply of 3 Core 2.5 Sqmm Flat Copper cable as per IS694:1990 for Submersible Motors of makes Polycab / GoldMedal / Million / Payal / Havells / Nakoda. (ELEC-1.6.10, PAGE NO: 203)

Manufacture, Supply, & Delivery of HDPE Pipe 32mm dia 12.5 Kg/Sq.cm conforming to IS 4984 - 1995 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.)