Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.4 LAccepted-AOC | ₹6.4 L | L1 | Accepted-AOC L1 |
| 2 | L2₹6.4 L+₹4,398.10 (0.69%)Rejected-AOC | ₹6.4 L+₹4,398.10 (0.69%) | L2 | Rejected-AOC L2 |
| Sl No | Description | Qty | Unit | MANSOOR P.A L2 | SAID MUHAMMED K N L1 |
|---|---|---|---|---|---|
| 1.00building | |||||
| 1.00 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | 4.41 | cum | 314.75 ₹1,388.05 | 312.59 ₹1,378.52 Lowest |
| 1.00 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 472.2 | kg | 202.06 ₹95,412.73 | 200.67 ₹94,756.37 Lowest |
| 1.00 | OD286110/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size shape and pitch of corrugation as approved by Engineer in charge)0.35mm (0.05%, total cated thickness with zink coatinf 120gms per sqm as per IS:277, in 240mpa steel grade,5-7microns Sheet should have primer on both side of the sheet and polyster top coat 15-18microns. Sheet should have protective quard film of 25 microns minimum to avoid scratches during transportation and should be suppleid in single length upto 12meter or as desireed by Engineerin charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal /vertical ormcurved surfaces, excluding the of purlins rafters and trusses and including cutting o size and shape wherever required AS PER GST bill invoice no:D-683 (591670123930)dt 27june2024 | 80.4 | sqm | 543.69 ₹43,712.68 | 539.96 ₹43,412.78 Lowest |
| 1.00 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | 11 | metre | 823.85 ₹9,062.35 | 818.2 ₹9,000.2 Lowest |
| 1.00 | OD289118/2025-2026:Providing width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2(modified item No:12.4.2) | 7 | metre | 466.25 ₹3,263.75 | 463.05 ₹3,241.35 Lowest |
| 1.01 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | 3.06 | cum | 5,650.49 ₹17,290.5 | 5,611.75 ₹17,171.96 Lowest |
| 1.01 | 50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1.56 | cum | 7,819.35 ₹12,174.73 | 7,765.73 ₹12,091.24 Lowest |
| 1.01 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 2.72 | cum | 6,941.27 ₹18,901.08 | 6,893.68 ₹18,771.49 Lowest |
| 1.01 | 50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | 4.8 | cum | 638.21 ₹3,063.41 | 633.84 ₹3,042.43 Lowest |
Tender Value
₹7.3 L
EMD Value
₹18,314
Closing Date
16 Mar 2026, 9:00 amClosed
Assistant Engineer, Erattupetta Municipality
O/o the AE LID EW Erattupetta Municipality
Annual Plan-167/26-ERATTTUPETTA MUNICIPLAITY FHC Maintenance
2026_LSGD_845228_2
E2-2508771/25 Dt 07-03-2026
Open Tender
Civil Works - Roads
Percentage
180 days
Erattupetta Municipality
Please refer Tender documents.
11 documents required · 11 mandatory
₹1,615
Yes
₹18,314
Yes
10 Sept 2026
7 Mar 2026
16 Mar 2026
7 Mar 2026
16 Mar 2026
7 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1building | |||||
| 1.001 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil | - | cum | - | - |
| 1.002 | 50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.003 | OD286110/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size shape and pitch of corrugation as approved by Engineer in charge)0.35mm (0.05%, total cated thickness with zink coatinf 120gms per sqm as per IS:277, in 240mpa steel grade,5-7microns Sheet should have primer on both side of the sheet and polyster top coat 15-18microns. Sheet should have protective quard film of 25 microns minimum to avoid scratches during transportation and should be suppleid in single length upto 12meter or as desireed by Engineerin charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal complete upto any pitch in horizontal /vertical ormcurved surfaces, excluding the of purlins rafters and trusses and including cutting o size and shape wherever required AS PER GST bill invoice no:D-683 (591670123930)dt 27june2024 | - | sqm | - | - |
| 1.004 | 12.4.2:Providing ridges or hips width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2 | - | metre | - | - |
| 1.005 | OD289118/2025-2026:Providing width 60 cm overall width plain G.S. sheet fixed with polymer coated J or L hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete.0.63 mm thick with zinc coating not less than 275 gm/m2(modified item No:12.4.2) | - | metre | - | - |
| 1.006 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete | - | cum | - | - |
| 1.007 | 50.6.2.3:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above floor two level upto floor five level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete | 1 | cum | - | - |
| 1.008 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) | 1 | cum | - | - |
| 1.009 | 50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge | 1 | cum | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.68 MB
TenderDoc.pdf
Tender Documents • 3.13 MB
viewsbd167.pdf
Other Document • 3.30 MB
BOQ_1427286.xls
BOQ • 0.33 MB
viewnit167.pdf
Additional Documents • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .