CONSTRUCTION OF 15 FIFTEEN NOS. OF 17.0 M LONG STEEL FLOATING TERMINALS AT 15 GHAT POINT ON THE RIVER BARAK NW-16 UNDER 100 percent CENTRAL SECTOR SCHEME

Amount

Supplying/providing of wooden blocks up to the sizes (75 x 45 x 30) cm under lifted vessel/boat etc. including necessary packing as per direction completed. Non- Sal blocks (to be considered 30% of total amount)

Supplying I.S. grade 2026 mild steel plate of required size and specified thickness in keel, bottom hull/side hull/transom/side keelson etc. for the hull erecting in position by cutting welding straighten etc. in shape and size and welding the same including cost of labour and materials etc. complete as directed.(Plate thickness 5mm & above)

Providing frame work for HULL by cutting M.S. angle, M.S. rod, channel etc. in required size welding the same including cost of labour and materials complete.

Providing steel fender cutting from M.S. pipe (having 6mm thick half round) fitting and fixing by welding including cost of labour and materials complete. 20 cm dia.

Providing frame work of superstructure by cutting M.S, angle, M.S. rod, channel etc. of required size and specified thickness and welding the same including cost of labour and materials etc. complete as directed.

Providing I.S. grade 2026 mild steel plate of required size and specified thickness in superstructure, passenger accommodation, wheel house, cabin etc. in shape and size and welding the same including cost of labour and materials etc. complete as directed. Thickness –3.15 mm

Supplying fitting and fixing M.S. pipe railing in deck and super structure of vessel/boat etc. complete as direction. 1.M.S. pipe (25 mm dia)

Supplying fitting and fixing M.S. pipe railing in deck and super structure of vessel/boat etc. complete as direction 2. M.S. Angle (50x50x5)

Providing corrugated galvanized Iron Sheet (CGI) Roofing OF TATA SHAKTEE/SAIL including fitting and fixing necessary galvanized hooks, bolts and nuts etc including charges for fitting and fixing complete as directed and specified

PCC work over Ferro cement hull over new steel in proportion 1:1:2 with hand gravels (size 3 to 6 mm) including providing 1 mm thick wire mesh siko powder/siko plaster etc. super liquid after cleaning its surface by using sand paper, steel wool scraper & water including providing of two coats of liquid mixture of siko latex, cement and sand including cost of labour and materials etc. complete as directed.

Providing Davits on the deck of the vessel/boat etc. fitting and fixing complete including its base frame complete as directed.

Providing capstan of 50 ton pulling capacity fitting, fixing on the deck of the vessel/boat etc. including its base frame complete as directed

Providing bollard including its base frame fitting and fixing on deck of the vessel/boat/barge etc. A) Double bollard (M.S./ Medium Size)

Providing Goose neck ventilation on the deck fitting and fixing compleate by welding as per direction

Providing fairlead on the deck fitting, fixing complete as directed

Providing Bilge pump of 30 lits per minute capacity of DGS & D grade-I type fitted with for pumping out the bilge water including its pipe connection and complete a) for supply of Bilge pump

Providing Bilge pump of 30 lits per minute capacity of DGS & D grade-I type fitted with for pumping out the bilge water including its pipe connection and complete b) Installation work

a) Providing one no 2.4 KVA Soundless Gen set

Providing one no 2.4 KVA Soundless Gen set b) installation work

Providing general service water pump including general service cum fire pump.

Supplying and installation of Siren (Electric operated 1.6 Km range)

Providing of electric wiring of the boat from the control panel with necessary L.T. wire of 6mm size (best quality) flexible wire, brackets, clip, nails, switch, board, switch holder etc with necessary fitting fixing of light & fan etc. as required complete .

a) Supplying and applying in interior/exterior walls/floor/roof etc. one coat of Epoxy primer of Janson & Nicholson/ Nerolac brand as priming coat after cleaning the surface as specified and directed and then apply two coats of Epoxy paint of Janson & Nicholson/ Nerolac brand of required shed on wall/roof/floor surface as specified and directed completed.

b) Polishing on new wood surface

c) Varnishing

Navigation and search light/flood light etc.

Launching the vessel on the river water without causing any damage to the vessel after completion of hull work and as per direction. (total wt.12 ton) a) Up to 10 ton capacity

Launching the vessel on the river water without causing any damage to the vessel after completion of hull work and as per direction. (total wt.12 ton)b) Addl. Per ton

Sanitary fittings, water supply, pipe fittings, pipe line works etc.

Supplying / providing life saving equipment a) Life Bouy. (P.V.C. protected MO T approved

Supplying / providing life saving equipment b) Life Jacket. . (P.V.C. protected MOT approved)

Supplying / providing life saving equipment c) fire fighting equipment

1. Steel wire rope 19 mm dia

2. Nylex / PP rope (40 mm dia.)

3. Stockless Anchor(150kg)

4. U-shackle 25mmdia

5. Iron chain 19 mm dia. Close link

Furniture against crew cabin, officers cabin with bunkers

Vinyl flooring, plain, coloured, marbled or Mosaic dotted finished laid with approved adhesive on sub base floor including spreading, cutting and fitting complete as per direction.

Providing , fitting and fixing frame work for wall paneling with Hollock/ Sundi/ Bonsom wooden battens complete as per direction

Providing and fixing 1st Class Local Wood Hollock/ Bonsum/ Sundi/ Gamari lining with tongue and groo0ve joints including fitting and fixing with the frame work complete as directed. Wall wood (20 mm thick)

Providing and fixing wood plank ceiling with but and lap joints including necessary nails and wood screws complete as directed.

Providing wood work in frame of false ceiling with fitting fixing in position as directed.

Letter writing on board.  Ashok Stambha

Letter writing on board.  IWT Emblem – 2 nos

Letter writing English and Assamese. 15cm size – 40nos

Letter writing English and Assamese. 10cm size – 70 nos

Letter writing English and Assamese. 5cm size – 46nos

Gangway( Size of Gangway 2.50m X1.50 m) Supplying mild Steel angle for frame stiffner etc. in the Gangway including fitting and fixing in position by cutting welding in required size and including cost of all labour and materials complete as directed.

Supplying I.S. Grade Mild Steel Plate in required size and thickness for foot guard in both side of the Gangway, fitting and fixing in position by cutting , bending, straightening etc. in proper shape and size including all cost of labour and materials etc. complete as directed.

Supplying 50 mm thick 1st Class seasoned Sal Wood plank for Gangway.

Supplying Steel Wire Rope (tested) for tying the Gangway with the main Terminal / Jetty structure

Supplying fitting and fixing 2 MT Capacity hand operated Winch including double way pully arrangement system for Tying the Gangway with the main Jetty structure and also for adjustment of Height of the Gangway.