Construction work of Compound Wall and Room As Per Various Location Chart, At. Thara

NAME OF WORK :- CONSTRUCTION WORK OF COMPOUND WALL AND ROOM, AT. THARA

TOTAL AMOUNT PUT TO TENDER

TOTAL AMOUNT PUT TO TENDER

PERCENTAGE RATE TENDER

Sr. No. SCHEDULE AMOUNT

1 Schedule - "B"- 1

2 Schedule - "B"- 2

3 Schedule - "B"- 3

Total Amount Rs.

Total Amount Rs.

I/We am/are willing to carry out the work @ ________% Above / Below_____________Percentage (should be writen in

figures and words) of the Estimated rates mentioned above amount of my / our Tender works out as under.

Estimated Amount Estimated Amount

Put to Tender Rs. 26,90,451.00 Put to Tender Rs.

Add % Rs. Deduct %Rs.

Total Rs. Total Rs.

(In Words (In Words

Stamp with Signature of Contractor

Consl.Engineer Engineer Chief Officer President

"DESIGN POINT" Thara Nagarpalika Thara Nagarpalika Thara Nagarpalika

Amreli Thara Thara Thara

THARA NAGARPALIKA - THARA

DIST:- BANASKANTHA

SCHEME:- 15% VIVEKADHIN YEAR 2026-27

NAME OF WORK :- CONSTRUCTION WORK OF COMPOUND WALL AT. ROHITNAGAR PRIMARY SCHOOL, AT.

"SCHEDULE - B1"

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all 44.27 157.16 Cumt.

lead and lift all strata.

Providing and laying cement concrete 1:3:6 ( 1 cement : 3 coarse sand :

Machine cut stone aggregate 40mm nominal size ) and curring complete 7.38 2,978.97 Cumt.

including cost of formwork in (a) Foundation and plinth.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in Cement 61.79 4,245.09 Cumt.

Mortar 1:5. (1- Cement : 5 -fine sand) (B) Conventional.

Providing and laying cement concrete 1:3:6 (1 cement, :3 coarse sand, :

6 crushed stone aggregate 20 mm norminal size) and curring complete 13.83 3,976.71 Cumt.

including cost of form work in (A) Wall caps/coping.

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in superstructure above plinth level

upto floor two level in Cement Mortar 1:5. (1- Cement : 5 -fine sand) (B)

Providing TMT Bar FE 500/500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two level.

20mm thick sand faced cement plaster on walls up to height 10 mtrs.

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (

cement : 3 sand ) and 8mm thick finishing coat of C.M. 1:1 ( 1 cement :

sand ) etc. complete

Finishing Wall with Weather Proof Exterior Emulsion Paint on Wall

Surface (Two Coats) to give an required shape even shade after

thoroguhly brushing the surface to remove all dirt, and remains of loose

powdered materials etc. complete.

Total Amount Rs.

Total Amount Rs.

Add 3% Contigency Charge Rs.

Total Amount Rs.

Total Amount Rs.

Stamp with Signature of Contractor

Consl.Engineer Engineer Chief Officer President

"DESIGN POINT" Thara Nagarpalika Thara Nagarpalika Thara Nagarpalika

Amreli Thara Thara Thara

THARA NAGARPALIKA - THARA

DIST:- BANASKANTHA

SCHEME:- 15% VIVEKADHIN YEAR 2026-27

NAME OF WORK :- CONSTRUCTION WORK OF ROOM AT. PRIMARY SCHOOL NO.2 @THARA

"SCHEDULE - B2"

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lift and lead all stratta.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand :

6- hand broken stone aggregates 40 mmnominal size) and curing

complete including cost of formwork in (A) Foundation and Plinth.

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete including cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base or columns and Mass

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20 mm nominal size) and finishing

smooth with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C work in (B) COLUMNS:(ii)

Having cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20mm nominal size) and finishing

smooth with, curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C work in BEAM (II) Having

cross sectional area more than 0.08 sqmt. and up to 0.12 sqmt.

Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. height of

propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings

cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20 mm nominal size) exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs having more than 10cm

and upto 13cm. thickness.

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20mm nominal size) for R.C.C lintel

including finishing smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

4- graded stone aggregates 20 mm nominal size) for reinforced concrete

Chhajjas not exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine

sand) to give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement.

Providing Thermo Mechanically Treated bar F.E. 500D Steel reinforcement

as per I.S. Standard for RCC work including bending, binding and placing

in position complete up to floor two level.

Brick work using common Brunt clay building bricks having crushing

strength not less than 35 Kg./Sqcm. In superstructure above plinth level

upto floor two level in cement mortar 1:5 (1cement : 5 fine sand) (b)

Filling available excavated earth (excluding rock) in trenches. plinth, sides

of foundations etc. in layers not exceeding 20 cm. in depth consolidating

each disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc.

Providing 15 mm thick cement plaster single coat on brick/concrete wall

for interior plastering up to floor two level finished even and smooth in (i)

Cement mortar 1:3.

Providing 20mm thick cement plaster in single coat on single or half brick

walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand).

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials etc complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base

of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing

on existing flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light shade.

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

Providing and laying Granite stone 18 mm. thick in skirting, dedo, risers of

steps & landing laid on a bed of 10 mm. Thick (Average) base of cement

mortar 1:4 (1-cement : 4-coarse sand) finished with flush pointing in white

or colour cement.

Providing and fixing extruded aluminum window having extruded aluminum

Colour Powder Coated section frame main outer size 127mm x 38.10mm

x 1.35mm (of Jindal Section no:2443,@ Wt.1.384 Kg/mt),horizontal Four

track member size 122.20mm x 31.75mm x 1.10mm (of Jindal Section

no:8787,@ Wt. 1.205 Kg/mt),vertical member of size 122.20mm x

31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt. 1.398 Kg/mt) with

sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of

Jindal Section no:8949 @ wt.of 0.456Kg/mt),vertical member of size

40mm x 18mm x 1.29mm (of Jindal Section no:8947 @ wt.of

0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for window.

Provoding and fixing flush door shutters, solid core construction with frame

of first class hardwood with cross board and face veneer or plywood face

panels, including anodised alluminium butt hinges with necessary screws.

(B) Non-decorative type and block board core anodised alluminium butt

hinges in flush door shutters (2) 35 mm thick.

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sa.mm

(Green) both are of ISl marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box. sinale mounting

base frame covered with textured/metallic/white front plate modules

erected on/ in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose H.D.Connector as directed. (a) with medium class Rigid

PVC pipe and accessories erected flushed on wall/ceiling complete.

20.00 449.45 Points.

Providing and laying broken chine mosaic flooring for terrace using 12mm

to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them

upto 15cm along the wall,clearing with water and oxalic acid etc. as

Supptying and erecting led lamps with following wattage capacity of 220 to

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 ( E27 / B22

lamp holders, pf>=0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (16 to 20 Watts).

Providing & erecting Approved make Ceiling Fan with double ball bearing

ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep complete,

canopy and 30 cms. down rod erected on existing hook or clamp with 24 /

0.2, 3 core flexible Copper wire with earthing [Make shall be approved by

Engineer in Charge]

Total Amount Rs.

Total Amount Rs.

Add 3% Contigency Charge Rs.

Total Amount Rs.

Total Amount Rs.

Stamp with Signature of Contractor

Consl.Engineer Engineer Chief Officer President

"DESIGN POINT" Thara Nagarpalika Thara Nagarpalika Thara Nagarpalika

Amreli Thara Thara Thara

THARA NAGARPALIKA - THARA

DIST:- BANASKANTHA

SCHEME:- 15% VIVEKADHIN YEAR 2026-27

NAME OF WORK :- CONSTRUCTION WORK OF ROOM AT. PRIMARY SCHOOL NO.1 @THARA

"SCHEDULE - B3"

PERCENTAGE RATE TENDER

Item Description Quantity Rate Per Amount

Excavation for foundation up to 1.5 mt. depth including sorting out and

stacking of useful materials and disposing of the excavated stuff up to all

lift and lead all stratta.

Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand :

6- hand broken stone aggregates 40 mmnominal size) and curing

complete including cost of formwork in (A) Foundation and Plinth.

Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse

sand : 4- graded stone aggregates 20 mm nominal size) and curing

complete including cost of formwork and reinforcement for reinforced

concrete work in (A) Foundations, footings, Base or columns and Mass

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20 mm nominal size) and finishing

smooth with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C work in (B) COLUMNS:(ii)

Having cross-sectional area more than 0.08 Sq.M and upto 0.18 Sq.M

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20mm nominal size) and finishing

smooth with, curing etc. complete including the cost of formwork but

excluding the cost of reinforcement for R.C.C work in BEAM (II) Having

cross sectional area more than 0.08 sqmt. and up to 0.12 sqmt.

Providing formwork of ordinary timber planking so as to give a rough finish

including centering shuttering strutting and propping etc. height of

propping and centering below supporting floor to ceiling not exceeding

M. and removal of the same for in situ reinforced concrete and plain

concrete work in. (H) (1) Sides and soffits of Beams Beam Haunchings

cantilevers Girders Bressumers and Lintels not exceeding 1 M. in Depth.

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20 mm nominal size) exposed work

with curing etc. complete including the cost of formwork but excluding the

cost of reinforsement for R.C.C work in (iii) Slabs having more than 10cm

and upto 13cm. thickness.

Providing and laying ordinary cement concrete 1:2:4 (1- Cement 2- coarse

sand : 4- graded stone aggregates 20mm nominal size) for R.C.C lintel

including finishing smooth with,curing etc. complete including the cost of

formwork but excluding the cost of reinforcement.

Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand :

4- graded stone aggregates 20 mm nominal size) for reinforced concrete

Chhajjas not exceeding 10cm. thickness upto floor two level including

finishing the exposed surfaces with cement mortar 1:3 (1-cement, 3 Fine

sand) to give a smooth and even surface centering and formwork and

curing complete excluding cost of reinforcement.

Providing Thermo Mechanically Treated bar F.E. 500D Steel

reinforcement as per I.S. Standard for RCC work including bending,

binding and placing in position complete up to floor two level.

Brick work using common Brunt clay building bricks having crushing

strength not less than 35 Kg./Sqcm. In superstructure above plinth level

upto floor two level in cement mortar 1:5 (1cement : 5 fine sand) (b)

Filling available excavated earth (excluding rock) in trenches. plinth,

sides of foundations etc. in layers not exceeding 20 cm. in depth

consolidating each disposited layer by ramming and watering.

Filling in foundation and plinth with murrum or selected soil in layers of

20cm. thickness including watering, ramming and consolidating etc.

Providing 15 mm thick cement plaster single coat on brick/concrete wall

for interior plastering up to floor two level finished even and smooth in (i)

Cement mortar 1:3.

Providing 20mm thick cement plaster in single coat on single or half brick

walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand).

Wall painting (two coats) with plastic emulsion paint of approved brand

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall surface

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials etc complete.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average)

base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finised with

flush pointing & cleaning the surface etc. complete for light shade.

Providing and laying polished kota stone slab 25mm thick in risers of

steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-

Cement : 3 coarse sand) and jointed with gray cement slury mixed with

pigment to match the shade of slab including rubbing and polishing etc.

Providing and laying Granite stone 18 mm. thick in skirting, dedo, risers of

steps & landing laid on a bed of 10 mm. Thick (Average) base of cement

mortar 1:4 (1-cement : 4-coarse sand) finished with flush pointing in white

or colour cement.

Providing and fixing extruded aluminum window having extruded

aluminum Colour Powder Coated section frame main outer size 127mm x

38.10mm x 1.35mm (of Jindal Section no:2443,@ Wt.1.384

Kg/mt),horizontal Four track member size 122.20mm x 31.75mm x

1.10mm (of Jindal Section no:8787,@ Wt. 1.205 Kg/mt),vertical member

of size 122.20mm x 31.75mm x 1.50mm (of Jindal Section no:8935,@ Wt.

1.398 Kg/mt) with sliding shutters of horizontal member size 40mm x

18mm x 1.29mm (of Jindal Section no:8949 @ wt.of 0.456Kg/mt),vertical

member of size 40mm x 18mm x 1.29mm (of Jindal Section no:8947 @

wt.of 0.456Kg/mt/Section 8948,@ Wt. 0.457 Kg/mt) with 5 mm thick

transparent bronze colour tinted float glass with powder coated aluminum

fittings and fixtures and transparent silicon sealant glass fixing to frame as

per details etc complete for window.

Provoding and fixing flush door shutters, solid core construction with

frame of first class hardwood with cross board and face veneer or

plywood face panels, including anodised alluminium butt hinges with

necessary screws. (B) Non-decorative type and block board core

anodised alluminium butt hinges in flush door shutters (2) 35 mm thick.

Providing & fixing M.S. grills of required pattern to wooden frames of

windows etc. with M.S. flats at required spacing and frame all-round

square or round bars with round headed bolts and nuts or by screws. (A)

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sa.mm

(Green) both are of ISl marked 1.1 KV grade FRLS PVC insulated multi

strand copper wires up to 10 mtr length, in below type of pipe erected with

6A Modular type switch / bell push & accessories and earth continuity of

following type, erected on PVC / Metallic/Wooden box. sinale mounting

base frame covered with textured/metallic/white front plate modules

erected on/ in wall / ceiling as per pipe erected, with necessary Lamp

holder/ceiling rose H.D.Connector as directed. (a) with medium class

Rigid PVC pipe and accessories erected flushed on wall/ceiling complete.

20.00 449.45 Points.

Providing and laying broken chine mosaic flooring for terrace using 12mm

to 20mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to

plain or slope and to be tempered to bring mortar creme out upto surface

using white cement including rounding off junctions and extending them

upto 15cm along the wall,clearing with water and oxalic acid etc. as

Supptying and erecting led lamps with following wattage capacity of 220 to

240 voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 ( E27 / B22

lamp holders, pf>=0.5 (A) LED Lamps integral type, with PC diffuser

suitable LAMP holder (16 to 20 Watts).

Providing & erecting Approved make Ceiling Fan with double ball bearing

ISI mark with condenser A.C.230V 50c/s. 1400 mm. sweep complete,

canopy and 30 cms. down rod erected on existing hook or clamp with 24 /

0.2, 3 core flexible Copper wire with earthing [Make shall be approved by

Engineer in Charge]

Total Amount Rs.

Total Amount Rs.

Add 3% Contigency Charge Rs.

Total Amount Rs.

Total Amount Rs.

Stamp with Signature of Contractor

Consl.Engineer Engineer Chief Officer President

"DESIGN POINT" Thara Nagarpalika Thara Nagarpalika Thara Nagarpalika

Amreli Thara Thara Thara