Construction of Adarsh Nivashi (Mishra) Shala Building (Cap-320), Boys Hostel Building with Dining (Cap-160), Girls Hostel Building with Dining (Cap-160) and Staff Quarters at Jakhala, Tal.Mandvi, Dist.Surat.

Name of Work :- Construction of Adarsh Nivashi (Mishra) Shala Building (Cap-320), Boys Hostel Building with Dining

(Cap-160), Girls Hostel Building with Dining (Cap-160) and Staff Quarters at Jakhala, Tal.Mandvi, Dist.Surat.

BILL OF QUANTITIES

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

1 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 12365.00 Cumt 122.94

of useful materials and disposing the excavated stuff all lead and lift. (A) Loose or

2 Excavation for foundation 1.50 mt to 3.00 mt depth including sorting out and 7124.00 Cumt 170.87

stacking of useful materials and disposing the excavated stuff all lead and lift. (B)

Dense or hard soil.

3 Filling in foundation and plinth with sand in layers of 20 cm. Thickness including 996.00 Cumt 481.80

watering ramming and consolidating etc. comp.

4 Filling available excavated Earth (Excluding Rock) in trench plinth side of 9254.00 Cumt 136.92

foundation in layer not excluding 20 cm in depth consolidation each deposited

layer by ramming and watering etc. complete.

5 Filling foundation and plinth with murrum or selected soil in layer of 20 cm in 1068.00 Cumt 301.78

thickness including ramming watering and consolidating etc. complete.

6 Applying general insecticide pest control treatment to floor,cupboards etc 11037.00 Sqmt 91.63

including labour materials etc.complete.using lmidacloprid 30.5 Scas per IS

part-III (0.075% concentration by mass) is recommended 10.5ml chemical diluted

with 5 liter of water application 0.5 liter chemical / Sqm of surface is

recommended as per I.S.

7 Providing and laying controlled cement concrete M.150 and curing complete 1706.00 Cumt 3958.25

including the cost of formwork But excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations and Plinth PCC.

8 Providing and laying controlled cement concrete M.250 and curing complete 1590.00 Cumt 4621.76

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (A) Foundations, footings, and Mass concrete

9 Providing and laying cement concrete 1:3:6 (1-Cement : 3- coarse sand : 6- 581.00 Cumt 3231.26

Crushed stone aggregates 40 mm nominal size) and curing complete excluding

cost of formwork in (A) Foundation and Plinth.

10 Providing and laying controlled cement concrete M-250 and curing complete 213.00 Cumt 7861.84

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Columns up to

11 Providing and laying controlled cement concrete M-200 and curing complete 210.00 Cumt 7822.45

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Ground FLOOR.

12 Providing and laying controlled cement concrete M-200 and curing complete 129.00 Cumt 7862.85

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts First Floor.

13 Providing and laying controlled cement concrete M-200 and curing complete 86.00 Cumt 7904.26

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Second Floor.

14 Providing and laying controlled cement concrete M-200 and curing complete 10.00 Cumt 7944.66

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars posts and struts Third floor.

15 Providing and laying controlled cement concrete M-250 and curing complete 874.00 Cumt 5985.26

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Ground & Plinth BEAMS.

16 Providing and laying controlled cement concrete M.150 and curing complete 509.00 Cumt 4336.94

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (C) Plinth Slabs.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

17 Providing and laying controlled cement concrete M.200 and curing complete 402.00 Cumt 6293.31

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (C) Ground floor Beams.

18 Providing and laying controlled cement concrete M.200 and curing complete 356.00 Cumt 6333.71

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (C) First floor Beams.

19 Providing and laying controlled cement concrete M.200 and curing complete 225.00 Cumt 6375.12

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (C) Second floor Beams.

20 Providing and laying controlled cement concrete M.200 and curing complete 13.00 Cumt 6416.53

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (C) Third floor Beams.

21 Providing and laying controlled cement concrete M-200 and curing etc. complete 26.00 Cumt 6305.43

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja for Ground floor.

22 Providing and laying controlled cement concrete M-200 and curing etc. complete 28.00 Cumt 6346.84

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja for First floor.

23 Providing and laying controlled cement concrete M-200 and curing etc. complete 18.00 Cumt 6387.24

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja for second floor.

24 Providing and laying controlled cement concrete M-200 and curing etc. complete 2.00 Cumt 6428.65

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Chhajja for Third floor.

25 Providing and laying controlled cement concrete M-200 and curing etc. complete 19.00 Cumt 7061.92

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintel for Ground floor.

26 Providing and laying controlled cement concrete M-200 and curing etc. complete 15.00 Cumt 7103.33

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintel for First floor.

27 Providing and laying controlled cement concrete M-200 and curing etc. complete 9.00 Cumt 7143.73

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintel for Second floor.

28 Providing and laying controlled cement concrete M-200 and curing etc. complete 2.00 Cumt 7185.14

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (c) Lintel for Second floor.

29 Providing and laying controlled cement concrete M.200 and curing complete 536.00 Cumt 6706.40

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Ground floor Slab.

30 Providing and laying controlled cement concrete M.200 and curing complete 427.00 Cumt 6747.81

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) First Floor slab.

31 Providing and laying controlled cement concrete M.200 and curing complete 276.00 Cumt 6788.21

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Second Floor slab.

32 Providing and laying controlled cement concrete M.200 and curing complete 17.00 Cumt 6829.62

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (C) Third floor slab.

33 Providing and laying controlled cement concrete M-200 and curing etc. complete 27.00 Cumt 7449.76

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (E) Stair case up to floor two level for Ground Floor

to first floor.

34 Providing and laying controlled cement concrete M-200 and curing etc. complete 19.00 Cumt 7490.16

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (E) Stair case up to floor two level for First Floor to

35 Providing and laying controlled cement concrete M-200 and curing etc. complete 12.00 Cumt 7531.57

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in (E) Stair case up to floor two level for Second floor to

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

36 Providing and laying controlled cement concrete M-200 and curing etc. complete 96.00 Cumt 8046.67

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for Ground floor.

37 Providing and laying controlled cement concrete M-200 and curing etc. complete 24.00 Cumt 8087.07

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for First floor.

38 Providing and laying controlled cement concrete M-200 and curing etc. complete 28.00 Cumt 8128.48

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for Second floor.

39 Providing and laying controlled cement concrete M-200 and curing etc. complete 22.00 Cumt 8168.88

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in RCC wall for Third floor.

40 Providing and laying controlled cement concrete M-200 for RCC work and curing 31.00 Cumt 7383.10

complete including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in coping on Ground Floor.

41 Providing and laying controlled cement concrete M-200 for RCC work and curing 5.00 Cumt 7424.51

complete including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in coping on First Floor.

42 Providing and laying controlled cement concrete M-200 for RCC work and curing 7.00 Cumt 7464.91

complete including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in coping on Second Floor.

43 Providing and laying controlled cement concrete M-200 for RCC work and curing 12.00 Cumt 7506.32

complete including the cost of form work but excluding the cost of reinforcement

for reinforced concrete work in coping on Third Floor.

44 Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, 1058968.00 Kgs. 77.87

binding and placing in position complete up to All floor Level.

45 Brick work using common burnt clay building bricks crushing strength not less 672.00 Cumt 4214.33

than 35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine

sand) (B) Conventional For below plinth.

46 Brick work using common burnt clay building bricks crushing strength not less 1007.00 Cumt 4503.04

than 35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine

sand) (B) Conventional For Groud Floor.

47 Brick work using common burnt clay building bricks crushing strength not less 675.00 Cumt 4545.16

than 35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine

sand) (B) Conventional For First Floor.

48 Brick work using common burnt clay building bricks crushing strength not less 483.00 Cumt 4587.28

than 35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine

sand) (B) Conventional For Second Floor.

49 Brick work using common burnt clay building bricks crushing strength not less 196.00 Cumt 4629.40

than 35 kg/sq.cm. in foundation and plinth in cement mortar 1:6 (1 cement : 6 fine

sand) (B) Conventional For Third floor.

50 Half brick masonry in common brunt clay building bricks having crushing 1003.00 Sqmt 685.66

strength not less than 35Kg/Sm. In C.M 1:4 (1cement : 4 coarse sand) in super

structure. (B) Conventional For Groud Floor.

51 Half brick masonry in common brunt clay building bricks having crushing 1072.00 Sqmt 690.29

strength not less than 35Kg/Sm. In C.M 1:4 (1cement : 4 coarse sand) in super

structure. (B) Conventional For First Floor.

52 Half brick masonry in common brunt clay building bricks having crushing 783.00 Sqmt 695.97

strength not less than 35Kg/Sm. In C.M 1:4 (1cement : 4 coarse sand) in super

structure. (B) Conventional For Second Floor.

53 Providing 20 mm thick double coat mala cement plaster on interior brick / 8686.00 Sqmt 286.10

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete. For Ground floor.

54 Providing 20 mm thick double coat mala cement plaster on interior brick / 8719.00 Sqmt 314.16

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete.For first floor.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

55 Providing 20 mm thick double coat mala cement plaster on interior brick / 5377.00 Sqmt 342.22

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete. For second floor.

56 Providing 20 mm thick double coat mala cement plaster on interior brick / 1421.00 Sqmt 370.28

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing etc. complete. For Third floor.

57 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and 4172.00 Sqmt 148.32

soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 cement

: 4 sand) etc. complete For Ground Floor.

58 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and 3973.00 Sqmt 172.88

soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 cement

: 4 sand) etc. complete.For First Floor.

59 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling 2734.00 Sqmt 197.44

and soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1

cement : 4 sand) etc. complete. For second Floor.

60 Providing 10 mm. Thick cement plaster in single coat for plastering on ceiling and 531.00 Sqmt 222.01

soffits of stairs and finished even and smooth in : (I) Cement mortar 1:4 (1 cement

: 4 sand) etc. complete. For Third floor.

61 20 mm Thick sand faced Gutka cement plaster on walls for all height above 16048.00 Sqmt 315.69

ground level consisting of 12 mm Thick backing coat of c.m. 1:3 (1 cement :

sand) and 8 mm Thick finishing coat of c.m. 1:1 (1 cement : 1 sand) with 1x1cm

Groves at juction of structure member etc. complete.all height.

62 Providing and fixing 150 mm Wide approved quality chicken wire mesh at 4158.00 Sqmt 54.54

junction of brick work and RCC work or two dissimilar surfaces, at all heights

fixed by nails, rowal plugs or tag by cement mortar 1:3 before applying the plaster,

including curing, scaffolding all complete as directed.

63 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 1419.00 Rmt 44.28

64 Applying two coats of (white cement based) or (acrylic lappy (putty)) and two 37303.00 Sqmt 40.59

coats of primer of approved brand and manufacture on new wall surface to give an

even shade including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

65 Wall painting (Three coats) with plastic emulsion paint of approved brand and 25455.00 Sqmt 126.92

manufacture on undecorated wall surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

66 Wall painting (Three coats) with plastic emulsion paint of approved brand and 11848.00 Sqmt 132.60

manufacture on undecorated ceiling surface to give an even shade including

throughly brushing the surface free from mortar droppings and other foreign

matter and sand papered smooth.

67 Providing One Coat of Alkali Resistant Primer on exterior wall surface of 16048.00 Sqmt 42.42

approved brand after thoroughly brushing surface to remove all dust and remains

of loose powdered material etc. comp. for all height.

68 Wall Painting (Two coats) with weather proof acraylic emulsion (Apex or 16048.00 Sqmt 120.26

equivalent type) paint of approved brand and manufacture and of required shade

on exterior wall surface to give an even shade over and including primery coat

with Alkaly resistance primer of approved brand after thoroughly brushing surface

to remove all dust and remains of loose powdered material etc. comp. for all

69 Providing And filling with good quality sinder (steam coal) as directed by 116.00 Cumt 454.50

engineer in charge in sunks in layers of 30 cm thick,including watering, placing,

ramming well etc as directed for all floor.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

70 Providing 20 mm thick Water proof cement plaster for sunk in single coat on brick 1341.00 Sqmt 317.14

/ conctrete wall for interor plastering up to floor two level finished even and

smooth (ii) cement mortar 1:3 (1- cement, 3 sand) and mixing waterproofing

materials of approved brand and manufacture in cement mortar in proportion

recommended by the manufacture for All floor.

71 Providing and laying water proofing treatment by conventional method including 4592.00 Sqmt 950.41

cleaning the slab surface by wire brush as directed including provding first layer

of C.M. 1:4 of 40 mm thickness mixed with water proofing compound at rate

prescribed by manufacturer, including putting of brick bats of average thickness

40 mm Well immerssed in water laid uniformly on first layer of mortar including

applying cement slurry @ rate of 0.08 bag/sqm. on fixed layer of brick bats

including maintaining necessary slope, in second layer 40 mm thick C.M 1:4

mixed with water proofing compound as directed, including finishing smooth with

cement slurry as directed complete.

72 Providing and fixing window having extruded aluminum Colour anodized section 244.00 Sqmt 1845.27

frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-0.738/Rmt)

horizontal Three track and horizontal & Vertical member of size 92.00 mm x

31.75 mm x 1.50 mm (Weight:-1.06/Rmt), with sliding Three Glass shutters of

horizontal member size 40mm x 18mm x 1.29mm (@ wt.of 0.456Kg/mt), vertical

member of size 40mm x 18mm x 1.29mm with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings & fixtures and

Lock Strip, transparent silicon sealant glass fixing to frame as per details etc

complete for window. W1.

73 Providing and fixing window having extruded aluminum Colour anodized section 124.00 Sqmt 1819.01

frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-0.738/Rmt)

horizontal two track and Vertical member of size 92.00 mm x 31.75 mm x

mm (Weight:-1.06/Rmt) with Two Glass shutters of horizontal member size 40mm

x 18mm x 1.29mm ( @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm

x 1.29mm with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings & fixtures and Lock Strip , transparent silicon

sealant glass fixing to frame as per details etc complete for window.W2,W3,W4.

74 Providing and fixing window having extruded aluminum Colour anodized section 19.00 Sqmt 1761.44

frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-0.738/Rmt)

horizontal Two track and Vertical member of size 92.00 mm x 31.75 mm x

mm (Weight:-1.06/Rmt) with sliding Four Glass shutters of horizontal member

size 40mm x 18mm x 1.29mm (@ wt.of 0.456Kg/mt), vertical member of size

40mm x 18mm x 1.29mm with 5 mm thick transparent bronze colour tinted float

glass with powder coated aluminum fittings & fixtures and Lock Strip, transparent

silicon sealant glass fixing to frame as per details etc complete for window.W5.

75 Providing & Fixing in position standard extruded approved colour anodised 56.00 Sqmt 1982.63

Aluminum Ventilator with outer frame 65 x 25 mm Stander Box Frame with 5mm

thick Ground Glass Louvers and Fixed Mosquito Net For ventilation including all

required materials, fixtures, fastenning, labours and equipments as per detailed

drawing as directed. For Ventilators V1,V2.

76 Providing and fixing in position collapsible steel shutters with vertical channel 20 47.00 Sqmt 2523.99

x 10x 2 mm braced with flat iron diagonals 20 x 5 mm size with top and bottom

rails of T_rin 40 x 40 x 6 mm with 38 mm dia,steel pulleys complete with bolts,

nuts, locking arrangements, stoppers, handles including applying priming coat

with two coats of enamel paints etc. Complet.

77 Providing and fixing M S angle openable grilled Door having 65 MM. x 65 MM x 52.00 Sqmt 4146.05

6 MM size M.S. angled welded togather to make a box frame and 20mm dia M.S.

bars to be fixed with it by drilling hole in the angle section and welded at 10 cm

C/C approx including anodized iron fixtures & fastenings including primer coat of

approved quality and two coats of oil paint etc. complet as per detail drawing as

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

78 Providing and fixing 35 mm thick flush door Double shutter, solid core with 43.00 Sqmt 3567.32

Shutter of Factory made & Stamped I.S 12823 Grade one, Type one, melamine

faced three layred resin Flushed Door Having Decorative Lamination on both

sides & 12 mm T.W.Beading Around the Door,FROM HOLDING LICENCE

FOR MINIMUM 5 YEARS and stainless steel handle, S.S. Aldrop, S.S. Handle,

S.S. Stopper and necessary Locking system of Godrej, zinc coated hinges, fixtures

& fastenings etc directed by engineer in charge. D2.

79 Providing and fixing 35 mm thick flush door Single shutter, solid core with 154.00 Sqmt 3673.37

Shutter of Factory made & Stamped I.S 12823 Grade one, Type one melamine

faced three layred resin Flushed Door Having Decorative Lamination on both

sides & 12 mm T.W.Beading Around the Door,FROM HOLDING LICENCE

FOR MINIMUM 5 YEARS and stainless steel handle, S.S. Aldrop, S.S. Handle,

S.S. Stopper and necessary Locking system of Godrej, zinc coated hinges, fixtures

& fastenings etc. directed by engineer in charge D3.

80 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP depress 315.00 Sqmt 2542.17

panel Single shutter having extra reinforcement on sides & edges in Gel coat

finish.The core of the shutter & frame is to be filed up with injected fire retradat

grade polyurethene foam done in situ along with embeded wooden pieces for

stiffening & also taking hinges & fintures.The whole FRP frame & shutter is to be

waterproof, weatherproof, termite proof & resistance to mild acid/alkali.Rates are

to be inclusive of S.S hinges with necessary screws & alluminum fixtures &

fastenings & fartener sleeve.Colour and Shade approved by Engineer-In-Charge.

81 Providing and fixing 120cm & 90 cm high Stainless steel railing made from 296.00 Sqmt 5580.25

anticorrocive 316 grade S S pipe of 50 mm dia (16Gauge) as hand rail with S S

316 grade Baluster of 38 mm dia (16Gauge) as a vertical support fixed in RCC

slab at 0.25m c/c including Four horizontal S S pipes of 16 mm dia (16Gauge) at

eqal distance fixed including The Provisions in Nation Building Code

part,Annex:B-6.2 with baluster, accessories as per detailed drawing as directed

82 Providing and fixing 45cm high M.S. Raling with MS Pipe Railing made from 10166.00 Kgs. 74.74

MS pipe of 50 mm dia (Rmt/wt 4.50kg) as hand rail with Baluster of 38 mm dia

(Rmt/wt 2.99kg) as a vertical support fixed in RCC slab & wall at 1.0m c/c

including three horizontal pipes of 50 mm dia at eqal distance fixed pipe with

baluster and Priming coat & two coat of oil paint including accessories as per

detailed drawing as directed etc. complete.

83 Providing and laying machine cut machine polished Granite stone treads& 602.00 Sqmt 1897.79

risers and Copboards in Single piece Max length with 1cm projecting, nozing

rounded moulding in tread laid over 12 mm (avg.) thick bases of cement mortar

1:6 (1-cement : 6-coarse sand) jointed with grey or colour cement slurry including

rubbing and polishing incl. making Three No.s of grooves of size 3mm X 3mm

along the length of treads etc. complete.

84 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm thick 7373.00 Sqmt 1015.53

flooring over 20 mm (average) thick base of cement mortar 1:6 (1-cement 6-

coarse sand) and jointed with grey cement slurry mixed with pigment to match the

shade of slab including rubbing and polishing etc.complete.

85 P & L 60x60 cm Machin cut Mirror polished Blue Kota Stone slab 25 mm thick in 391.00 Sqmt 1144.15

riser of steps,skirting dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-

cement 3-coarse sand) and jointed with grey cement slurry mixed with pigment to

match the shade of slab including rubbing and polishing etc.complete.

86 P & L 60x60 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring treads of 555.00 Sqmt 1017.30

steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-cement:3-

coarse sand) finishing with flush pointing in colour cement slurry etc. complete.

Colour and Shade approved by Engineer-In-Charge.

87 P & L 30x60 cm. Glazed Tiles 6 mm thick in skirting risers of steps and dedo on 1434.00 Sqmt 1127.48

10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with colour

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

88 P & L 30x30 cm. Matt Finished Antisked Ceramic Tiles 6 mm thick in flooring 220.00 Sqmt 1090.32

treads of steps and landing laid on a bed of 12 mm thick cement mortar 1:3 (1-

cement:3-coarse sand) finishing with flush pointing in colour cement slurry etc.

complete. Colour and Shade approved by Engineer-In-Charge.

89 P & L 30x45 cm. Glazed Vitrified Tiles 6 mm thick in skirting risers of steps and 1266.00 Sqmt 1120.36

dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with

colour cement slurry.

90 Providing and laying water proofing treatment with broken chine mosaic flooring 4136.00 Sqmt 779.70

for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over

cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out

upto surface using white cement including rounding off junctions and extending

them upto 15 cm along the wall, clearing with water and oxalic acid etc. as

91 Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm 6165.00 Sqmt 706.93

thick with grade of concrete M300 pnumatic compressed/Vibrated mechanically

and as per approved design confieming to IS 15658: 2006 including 35 mm Sand

layer for levelling and filling the joint with sand in proper line and level as per

guidelines of IRC : SP 63-2018 etc complete.

92 Providing and fixing Mirrar polished 18 mm thick Green Marble stone in Single 2257.00 Sqmt 1387.74

piece with full round edge and polished of approved quality in clading on Cill &

Jambs and around the doors/ windows/ ventilation with 12 mm thick cement

motor CM (1:4) and fixing with cement slurry & adhesive including moulding of

exposed edges as directed by engineering in charge etc. complete.

93 Providinfg and fixing Safty grills of required pattern for windows/ Door using 37516.00 Kgs. 113.12

necessary 12mm M.S Round/ Square bar /M.S angle/ M.S pipe, M.S flats and

other structural steel at required spacing including cutting, welding and fabriction

etc. including one coat of primer of approved quality and two coats of oil painting

as per detail drawing etc complete.

94 Providing and fixing polished 18 mm thick black granite with full round edge and 1514.00 Sqmt 2372.49

double side polished of approved quality in Cupboard Self & Partition and fixing

with cement slurry & adhesive including moulding of both exposed edges as

directed by engineering in charge etc. complete.

95 Providing erecting and fixing double coated (ISI) water tank of required capacity 60000.00 Litre 3.95

each with all necessary fittings and connection etc. complete on terrace.

96 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. Pipe 1560.00 Rmt 195.67

(SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

97 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. Pipe 835.00 Rmt 148.12

(SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

98 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. Pipe 1035.00 Rmt 91.84

(SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

99 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. Pipe 1440.00 Rmt 72.65

(SCH- 40) for cold water including fittings as approved by Engineer In Charge.

Pipe shall be fixed on the wall with the help of clamp at every two metre C/C or

shall be concelled as directed including necessary fittings etc. including testing of

pipe and joints and fixing the same with adhesive solvent, including cost of all

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

100 Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type 2910.00 Rmt 834.38

B) conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring, & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm

diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

101 Providing laying (to level or slopes) and jointing reinforced concrete Light duty 2530.00 Rmt 678.02

non-pressure pipes I.S. class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (D)

102 Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type 450.00 Rmt 878.57

B) conforming to IS 13592-1992 with one end plain and other end socketed with

rubber ring & fittings conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm

diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or

shall be concealed in walls as directed including necessary fittings such as bends,

shoes etc. including testing of pipes and joints and jointed with adhesive solvent

cement including cost of all materials.

103 Providing, laying and jointing in true line and level 75 mm dia. UPVC SWRType 875.00 Rmt 740.33

B pipe conforming to IS 13592-1992 with one end plain and other end socketed

with rubbering and fitting conforming to ISI 14735-1999 of approved make for

drainage system pipe line, pipe shall be jointed with each other with rubber

lubricant, pipe shall be fixed on wall using of PVC clamp at every 2000 mm c/c

or shall be conceled in walss as directed including necessary fittings such as

bends, shoes etc. including testing of pipes and joints and jointed with adhesive

solvent cement including cost of all materials.

104 Providing and fixing in PVC SWR cowel went 75mm dia to pipes. (B) 75mm 25.00 Nos. 15.66

105 Providing and fixing in PVC SWR cowel went 110mm dia to pipes. (B) 110mm 19.00 Nos. 28.79

106 Providing and fixing MS Z clamp on Wall or celling for Pipe Fitting including all 2694.00 Nos. 70.70

type necessary fittings and accessories etc. completed as per directed engineer in

107 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm diameter 342.00 Nos. 599.64

with jali of the following nominal diameter of self cleansing design with C.I

scread down or hinged grating including the cost of cutting and making good the

108 Providing and fixing wash down water closet dual flushing system type 90.00 Nos. 4343.00

(European type W C pan) with integral P and S trap including jointing the trap

with soil pipe in cement mortar 1:1 (1 cement five sand) including providing and

fixing plastic seat cover for wash down WC with CP brass hinges and rubber

buffers back plastic seat and including providing and fixing PVC flushing tank

with a pair of C I or MS bracket with complete fitting such as lead valve siphon

mm dia brass ball valve with polythene float CP brass handle unions and

couplings for connection with inlet out let and over flow pipes 40 mm dia

porcelain enameled flush bend including cutting holes in walls and making good

the same connection the flush bend with cistern and closet vitreous china.

109 Provision and fixing water closet squatting orissa type W.C. pan size 580mm 15.00 Nos. 1625.09

integral footrest and 100 mm P or S trap and in cluding 25 mm dia CP brass flush

valve and GI inlet connection etc. comp. (A) Vitreous china long pattern white or

110 Providing and fixing brass screw down stop tap. (A) 15mm dia. 184.00 Nos. 205.83

111 Providing and fixing brass screw down stop tap. (C) 25mm dia. 91.00 Nos. 220.82

112 Providing and fixing ball cock of approved. quality as directed. (A) Copper Metal 15.00 Nos. 189.84

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

113 Providing and fixing Gun metal check or non-return fullway wheel valve. (E) 18.00 Nos. 663.43

114 Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. 74.00 Nos. 1583.44

brackets painted white including sutting holes and making good the same but

excluding fittings. (A) Vitreous China: (ii) Flat Back washbasin 550 mm x v

400mm size. (i) In white colour.

115 Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia. 116.00 Nos. 67.91

116 Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia. 116.00 Nos. 78.75

117 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass 92.00 Nos. 859.41

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge

with C.P. brass screws and washers.

118 Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed 95.00 Nos. 616.42

to wooden plugs with C.P. brass scews (B) 600mm x 20mm size.

119 Providing and fixing screw down bib taps of following size. (A) Brass screw 332.00 Nos. 186.83

down bib tap polished bright. (i) 15mm dia.

120 Providing and fixing pillar tap, capstan head, screw down high pressure with 92.00 Nos. 308.73

screws, shanks and back nuts. (i) 15mm dia.

121 Providing and fixing in position 300 mm high, 150 mm wide English letters made 780.00 Nos. 707.00

from 1.0 mm thick stainless steel sheet as directed by Engineer in charge with all

necessary tools & plants etc. complete.

122 Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and 66.00 Nos. 1246.92

water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard

weight (i) Square mouth traps (B) 150mm x 100mm size P or R type.

123 Constructing brick masonry chamber for underground C.I. Inspection chamber 53.00 Nos. 3208.77

and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M.

1:5 precast RCC cover 455mm x 610mm intenal dimensions with frame (R.C.C.

top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate

20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed

concrete etc. complete (i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line.

124 Constructing brick masonry chamber for underground C.I. Inspection chamber 53.00 Nos. 3916.78

and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(i) Inside dimensions 500mmx

700mm and 450mm deep for single pipe line.

125 Extra over items for every additional depth of 0.1M. of part thereof beyond 33.00 Each 242.39

450mm depth for Brick masonry chamber. (i) for 455mm x 610mm size.

126 Extra over items for every additional depth of 0.1M. of part thereof beyond 33.00 Each 264.86

450mm depth for Brick masonry chamber. (i) for 500mm x 700mm size.

127 Providing cement vata (10cm x 10cm size) quarter round in cement mortar 1:1 1216.60 Rmt 24.28

including neat cement finishing watering etc. Complete.

128 Providing and fixing MS Ladder of required pattern with MS flats(30x3mm) or 2000.00 Kgs. 114.13

round or square bars (12mm) at required spacing & with round headed bolts and

nuts or screws or welding including primer coat of approved quality and two coats

of oil paintas as directed by engineer in charge.

129 Constructing Sandwitch Platform of 18 mm thick Polished Black Granite at top 207.80 Sqmt 2865.37

and 25 mm thick Kota stone slab one side polished at bottom with cementing

Materials / adhsives including makeing necessary grooves in walls with Vertical

sandwich two Kotastone 25 mm support every 60 cm centre to centre or as

required including all labour material of approved quality incl. full moulded round

front edge granite strip of one side polished and jointed with grey cement slurry

including rubbing and polishing etc. complete for all floors.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

130 Providing and fixing kitchen platform trolley having three drawers of SS (IS 304) 87.00 Sqmt 12123.03

of required size like thali, katleri, perforated, partition, cupsosar type in kitchen

platform having drawer front side by using 19mm thick all proof plywood of ISI

quality all side laminated &T.W Beading etc. as directed. The size of SS (IS 304)

basket of size 4" to 18" for thali, dish, katleri, perforated, partition, cupsosar type

as directed including necessary S.S. fittings, handles, nobs, telescopic channels,

etc. as directed.

131 Providing and fixing Kitchen sink including cutting holes in walls and making 24.00 Nos. 2621.95

good the same but excluding fittings. (C) SS Sink Glosy ASIS 304 Grade x 1mm

thick with over all size 610x460 mm & bowl size 550x400x200.

132 Providing and fixing 0.45 meter wide sand which type wash counter platform 24.00 Sqmt 3411.78

including supplying and fixing granite stone of 18 mm thick mirror polished on

top and side posiition and vertical strip at front with cement slurry & adhesive

including moulding of both exposed edges over 25 mm thick kotah stone

platform fixing in top and sides and itermediates supports fixing with cement

mortar and adhesive and finishing with C.P. brass waste, M.I. fisher union, pillar

tap,Rubber plug all material and labour and assessories complete etc.

133 Providing & Fixing 114mm wide G.I. Sheets having weight not less than 490 268.00 Sqmt 2777.50

Gm/m roll formed to create 84mm wide louver snap fixed on special shaped GI

channel. Opnebal louvers & channels shall finished with powder coating of

micron (1) 0.55mm thick sheet etc. complet as per detail drawing as directed.

134 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 555.00 Rmt 170.36

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete.[A] 15 mm.

135 Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 885.00 Rmt 253.82

13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of

following dia. nominal bore tube fittings and clamps including making good the

wall, ceiling and floor etc. complete. [C] 25 mm.

136 Providing and laying and fixing 50 mm thick expansion joint by hydro cell semi 487.00 Sqmt 1491.03

rigid UV resistance with high performance laminated closed cell polythene foam

joint filler in sheet foam as directed, etc. complete.

137 Applying and providing Expansion joint sealing System on 100 mm vide joint 536.00 Sqmt 4772.00

including cleaning of exansion joint by mechanical means provision of adhesive

and flexible membrane with required bond length as per menufracturer

specification and 4mm thick alluminium strip covering with one side sloted and

bolted with suitable system, inclusive of all manpower, machinery and material as

per specification and as directed.

138 Providing and filling the expansion joint by Thioflex 600 polymer or equivalent 536.00 Sqmt 515.39

confirm to BS 4254-1983 as per required shade and manufactured specifi-cation

by making groove of 50 mm x 12.5 mm lather by cutting or by repairing groove

and removing mortar drop or any other foreign materials including applying

primer and filling required size (oversize of joint PU foam etc. complete.

139 Providing and fixing 25 cm Wide & 3mm thick exterior composite panel on 536.00 Sqmt 1054.34

existing expansion joint horizontally & vertically with all material, hardware,

acessories & fittings etc completed.

140 Providing and Fixing 15 mm thick 300 mm x 300 mm Tactile Warning Tiles 17.00 Sqmt 1380.67

(Attention Tiles i.e. Tactile Warning Surface Indicator {TWSI}) of Johnsan

Endura Tac Button Yellow Plus or equvqlent make in flooring laid on 20 mm

thick cement mortar 1:6 (1 cement : 6 coarse sand) on new surface and jointed

with cement slurry including finished with flush pointing & cleaning the surface

for all floors as per detailed drawing etc. complete as directed by Architect or

Engineer in charge. Thse tiles shall be Anti Skid, Chemical Resistant, Fade Proof,

Frost - Heat & Weather Proof, High Flexural Strength, Highly Durable, Stain

Resistance. All Tactile Warning Tiles meet the specific size and dimension

standards as required by ISO/FDIS

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

141 Providing and Fixing a set of wall mounted 38 mm dia U shaped horizontal 14.00 Per Set 2671.45

stainless steel collapsible grab bar 38mm vertical stainless steel fixed grab rail of

grade SS 304 from round pipe supported and 75 mm dia 8 mm thick SS 304 base

flange on wall including anchor fasteners, nuts, accesSOR 23-24ies as per detailed

drawing etc. complete as directed by Architect or Engineer in charge.

142 Providing & fixing 25mm Thick cupboard of plywood Shutter size 0.90 x2.10 mt. 777.00 Sqmt 3493.59

including 19 mm & 6mm thick all proof plywood which BWR confirming to IS

710 designs & grooves as directed by architectural With Teak wood Fram 25mm

x 50 mm size including lamination of 1.0 mm thick in single or double shade of

plain or texture finish as directed on all visible face including on teak wood batten

patti and 0.80 mm white lamination on all non visible faces & remaining faces.

Fixing by necessary S.S. Decorative handle, S.S.stopper, Magnet S.S. Hinges &

Polishing of all teak wood Framing good quality lock with necessary fixtures &

fasteners of standard make as per detail drawing and image also including all

labours as approved by engineer-in-charge etc. complete.

143 Steel work, welded in built up sections framed work including cutting, hoisting, 126007.00 Kgs. 91.08

fixing in position and applying a priming coat of read lead paint & two coat oil

paint. (A) In beams and joists, channels angles Tees, flats, with connecting plates

or angle cleats as in main and cross beams. Hip and jack rafters, purlins conneted

to common rafters and the like.

144 Providing and fixing of Ridge flashing for roof panel shall be made out of 0.5 mm 4186.00 Sqmt 867.39

thick pre coated GI sheet. The Precoated sheet shall be of minimum 240 mpa steel

grade confirming to IS 14246:1995 and shall have zinc coating of minimum

gsm as per IS:277:1992 , 5-7 microns epoxy primer on both side of the sheet and

polyester top coat 15-18 micron. The PPGI Sheet shall have plastic protective

guard film of minimum 25 microns to avoid scratches during transportation. The

ridge shall be fixed to the steel members by pop rivet or self drilling/self stitching

fastners @ maximum 450 mm c/c along length of capping/flashing etc complete.

145 Providing and fixing window having extruded aluminum Colour anodized section 208.00 Sqmt 2047.27

frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-0.738/Rmt)

horizontal two track and Vertical member of size 92.00 mm x 31.75 mm x

mm (Weight:-1.06/Rmt), with Two Glass shutters of horizontal member size

40mm x 18mm x 1.29mm (@ wt.of 0.456Kg/mt), vertical member of size 40mm x

18mm x 1.29mm with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings & fixtures and Lock Strip, transparent silicon

sealant glass fixing to frame Fixed Glass Below Window as per details etc

complete for window. W1,V1.

146 Providing and fixing window having extruded aluminum Colour anodized section 22.00 Sqmt 3144.13

frame main outer size 95.00 mm x 24.10 mm x 1.17 mm (Weight:-0.738/Rmt)

horizontal Three track and horizontal & Vertical member of size 92.00 mm x

31.75 mm x 1.50 mm (Weight:-1.06/Rmt), with sliding Three Glass shutters of

horizontal member size 40mm x 18mm x 1.29mm (@ wt.of 0.456Kg/mt), vertical

member of size 40mm x 18mm x 1.29mm with 5 mm thick transparent bronze

colour tinted float glass with powder coated aluminum fittings & fixtures and

Lock Strip, transparent silicon sealant glass fixing to frame and Fixed Glass Brick

Below as Shown in Elevation as per details etc complete for window.W2.

147 Providing & Fixing in position standard extruded approved colour anodised 366.00 Sqmt 1371.58

Aluminum Ventilator with outer frame 65 x 25 mm Stander Box Frame with

3MM.THICK BAJARI FIGURED ADGESTEBLE GLASS LOUVERS For

ventilation including all required materials, fixtures, fastenning, labours and

equipments as per detailed drawing as directed. For Ventilators

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

148 Providing and fixing M.S. FABRICATED ENTRANCE DOOR Double shutter 12.00 Sqmt 1631.15

having 100 MM. x 38 MM x 6 MM Square box Section Fram and 25mm x 25mm

x 6mm size Square box Pipe Horizontal. welded togather to make a box frame

and M.S. pipe to be fixed with it by drilling hole in the angle section and welded

at 10 cm C/C approx including anodized iron fixtures & fastenings including

primer coat of approved quality and two coats of oil paint etc., complet as per

detail drawing as directed.D0

149 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP depress 16.00 Sqmt 2569.44

panel Double shutter having extra reinforcement on sides & edges in Gel coat

finish.The core of the shutter & frame is to be filed up with injected fire retradat

grade polyurethene foam done in situ along with embeded wooden pieces for

stiffening & also taking hinges & fintures.The whole FRP frame & shutter is to be

waterproof, weatherproof ,termite proof & resistance to mild acid/alkali.Rates are

to be inclusive of S.S hinges with GRAB BARS FOR DIS. Toilet and necessary

screws & alluminum fixtures & fastenings & fartener sleeve.Colour and Shade

approved by Engineer-In-Charge. D1

150 Providing and fixing 38 mm thick flush door shutter, solid core with Anodized 111.00 Sqmt 4275.33

Aluminium section (door section -weight not less than 1.1 kg/mt) frame size

63.5mm x 38mm inserted teak wood frame inside the aluminium section for

durable grip of door hinges & Singal shutter with required teakwood batten

having 1mm thick lamination on both side, Durable Grip shall be providing with

both side 15cm long stainless steel handle and necessary Locking system of

Godrej, fixtures & fastenings etc. directed by engineer in charge for D2.

151 Providing and fixing Aluminium Door with Anodized Aluminium section (door 4.00 Sqmt 2432.08

section -weight not less than 1.1 kg/mt) frame size 63.5mm x 38mm and Anodized

AlluminiumVertical Section 8949, 40.00 x 18.00 x 1.29 mm @ Wt. 0.456 Kg/mt

with clear spacing 100mm including fixed on frame of section frame on four side,

all louvres section should be for ventilation & for cut the vision will be fitted in

position including accessories as per requirement as directed by Engineer-in-

charge etc. complete.D6.

152 P & L 30x45 cm. Glazed Ceramic Tiles 6 mm thick in skirting risers of steps and 910.00 Sqmt 1127.48

dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed with

colour cement slurry.

153 Providing and laying controlled cement concrete M-300 and curing complete 188.00 Cumt 4869.21

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (A) Foundations, Footings and

Mass concrete. Footing.

154 Providing and laying controlled cement concrete M-300 and curing complete 65.00 Cumt 8020.41

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (d) Columns Up to Plinth and

155 Providing and laying controlled cement concrete M-250 and curing complete 27.00 Cumt 7903.25

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and struts

156 Providing and laying controlled cement concrete M-250 and curing complete 27.00 Cumt 7943.65

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and struts

Second floor Floor.

157 Providing and laying controlled cement concrete M-250 and curing complete 27.00 Cumt 7985.06

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and struts

158 Providing and laying controlled cement concrete M-250 and curing complete 27.00 Cumt 8026.47

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and struts

159 Providing and laying controlled cement concrete M-250 and curing complete 14.00 Cumt 8066.87

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in Columns, pillars posts and struts

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

160 Providing and laying controlled cement concrete M-250 and curing complete 53.00 Cumt 6740.74

including the cost of formwork with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Slab For Ground floor.

161 Providing and laying controlled cement concrete M-250 and curing complete 53.00 Cumt 6782.15

including the cost of formwork with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Slab For First floor.

162 Providing and laying controlled cement concrete M-250 and curing complete 53.00 Cumt 6823.56

including the cost of formwork with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Slab For Second floor.

163 Providing and laying controlled cement concrete M-250 and curing complete 53.00 Cumt 6863.96

including the cost of formwork with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Slab For Third floor.

164 Providing and laying controlled cement concrete M-250 and curing complete 53.00 Cumt 6905.37

including the cost of formwork with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Slab For Fourth floor.

165 Providing and laying controlled cement concrete M-250 and curing complete 6.00 Cumt 6945.77

including the cost of formwork with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Slab For Fifth floor.

166 Providing and laying controlled cement concrete M-250 and curing complete 64.00 Cumt 6328.66

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Beam For Ground floor.

167 Providing and laying controlled cement concrete M-250 and curing complete 64.00 Cumt 6370.07

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Beam For First floor.

168 Providing and laying controlled cement concrete M-250 and curing complete 64.00 Cumt 6410.47

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Beam For Second floor.

169 Providing and laying controlled cement concrete M-250 and curing complete 64.00 Cumt 6451.88

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Beam For Third floor.

170 Providing and laying controlled cement concrete M-250 and curing complete 64.00 Cumt 6492.28

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Beam For Fourth floor.

171 Providing and laying controlled cement concrete M-250 and curing complete 5.00 Cumt 6533.69

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (C) Beam For Fifth floor.

172 Providing and laying controlled cement concrete M-250 and curing etc. complete 2.00 Cumt 6309.47

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Chhajja for Ground floor.

173 Providing and laying controlled cement concrete M-250 and curing etc. complete 4.00 Cumt 6349.87

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Chhajja for First floor.

174 Providing and laying controlled cement concrete M-250 and curing etc. complete 4.00 Cumt 6391.28

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Chhajja for Second floor.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

175 Providing and laying controlled cement concrete M-250 and curing etc. complete 4.00 Cumt 6431.68

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Chhajja for Third floor.

176 Providing and laying controlled cement concrete M-250 and curing etc. complete 4.00 Cumt 6473.09

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Chhajja for Fourth floor.

177 Providing and laying controlled cement concrete M-250 and curing etc. complete 1.00 Cumt 6513.49

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Chhajja for Fifth floor.

178 Providing and laying controlled cement concrete M-250 and curing etc. complete 1.00 Cumt 7097.27

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Lintel for Ground floor.

179 Providing and laying controlled cement concrete M-250 and curing etc. complete 4.00 Cumt 7137.67

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Lintel for First floor.

180 Providing and laying controlled cement concrete M-250 and curing etc. complete 4.00 Cumt 7179.08

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Lintel for Second floor.

181 Providing and laying controlled cement concrete M-250 and curing etc. complete 4.00 Cumt 7219.48

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Lintel forThird floor.

182 Providing and laying controlled cement concrete M-250 and curing etc. complete 4.00 Cumt 7260.89

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Lintel for Fourth floor.

183 Providing and laying controlled cement concrete M-250 and curing etc. complete 1.00 Cumt 7301.29

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (c) Lintel for Fifth floor.

184 Providing and laying controlled cement concrete M-250 and curing etc. complete 3.00 Cumt 7391.18

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (E) Stair case up to floor two level

for Ground floor to First floor.

185 Providing and laying controlled cement concrete M-250 and curing etc. complete 3.00 Cumt 7431.58

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (E) Stair case up to floor two level

for First floor to Second floor

186 Providing and laying controlled cement concrete M-250 and curing etc. complete 3.00 Cumt 7472.99

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (E) Stair case up to floor two level

for Second floor to Third floor

187 Providing and laying controlled cement concrete M-250 and curing etc. complete 3.00 Cumt 7513.39

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (E) Stair case up to floor two level

for Third floor to Fourth floor.

188 Providing and laying controlled cement concrete M-250 and curing etc. complete 3.00 Cumt 7554.80

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in (E) Stair case up to floor two level

for Fourth floor to Fifth Floor.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

189 Providing and laying controlled cement concrete M-300 and curing etc. complete 16.00 Cumt 7470.97

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in RCC Vertical and Horizontal Wall

for Up to Plinth & Ground floor.

190 Providing and laying controlled cement concrete M-250 and curing etc. complete 12.00 Cumt 7356.84

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in RCC Vertical and Horizontal Wall

for First floor.

191 Providing and laying controlled cement concrete M-250 and curing etc. complete 12.00 Cumt 7398.25

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in RCC Vertical and Horizontal Wall

for Second floor.

192 Providing and laying controlled cement concrete M-250 and curing etc. complete 12.00 Cumt 7438.65

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in RCC Vertical and Horizontal Wall

for Third floor.

193 Providing and laying controlled cement concrete M-250 and curing etc. complete 12.00 Cumt 7480.06

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in RCC Vertical and Horizontal Wall

for Fourth floor.

194 Providing and laying controlled cement concrete M-250 and curing etc. complete 22.00 Cumt 7520.46

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in RCC Vertical and Horizontal Wall

for Fifth floor.

195 Providing and laying controlled cement concrete M-250 for RCC work and 1.00 Cumt 5956.98

curing complete including the cost of form work with Ply & Cuplock but

excluding the cost of reinforced concrete work in coping on Ground floor.

196 Providing and laying controlled cement concrete M-250 for RCC work and 2.00 Cumt 5997.38

curing complete including the cost of form work with Ply & Cuplock but

excluding the cost of reinforced concrete work in coping on First floor.

197 Providing and laying controlled cement concrete M-250 for RCC work and 2.00 Cumt 6038.79

curing complete including the cost of form work with Ply & Cuplock but

excluding the cost of reinforced concrete work in coping on Second floor.

198 Providing and laying controlled cement concrete M-250 for RCC work and 2.00 Cumt 6079.19

curing complete including the cost of form work with Ply & Cuplock but

excluding the cost of reinforced concrete work in coping on Third floor.

199 Providing and laying controlled cement concrete M-250 for RCC work and 2.00 Cumt 6120.60

curing complete including the cost of form work with Ply & Cuplock but

excluding the cost of reinforced concrete work in coping on Fourth floor.

200 Providing and laying controlled cement concrete M-250 for RCC work and 1.00 Cumt 6161.00

curing complete including the cost of form work with Ply & Cuplock but

excluding the cost of reinforced concrete work in coping on Fifth floor.

201 Brick work using common burnt clay building bricks crushing strength not less 66.00 Cumt 4671.51

than 35 Kg/Sq.cm. in super structure above plinth level upto floor two level in

cement mortar 1:6 (1cement : 6 fine sand) (B) Conventional For Fourth floor.

202 Brick work using common burnt clay building bricks crushing strength not less 15.00 Cumt 4713.63

than 35 Kg/Sq.cm. in super structure above plinth level upto floor two level in

cement mortar 1:6 (1cement : 6 fine sand) (B) Conventional For Fifth floor.

203 Half brick masonry in common brunt clay building bricks having crushing 284.00 Sqmt 698.26

strength not less than 35Kg/Sm. In C.M 1:4 (1cement : 4 coarse sand) in super

structure.(B) Conventional For Third floor.

204 Half brick masonry in common brunt clay building bricks having crushing 284.00 Sqmt 704.57

strength not less than 35Kg/Sm. In C.M 1:4 (1cement : 4 coarse sand) in super

structure.(B) Conventional For Fourth floor.

205 Providing 20 mm thick double coat mala cement plaster on interior brick / 1200.00 Sqmt 398.33

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing with1x1cm Groves at juction of structure

member etc. complete.For Fourth floor.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

206 Providing 20 mm thick double coat mala cement plaster on interior brick / 52.00 Sqmt 426.39

concrete work for plastering comprising of base coat of 12 mm thick cement

plaster in cement mortar (1 Cement : 4 coarse sand) in rough finishing and 8 mm

thick top coat of cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with

trovel including scaffolding curing with1x1cm Groves at juction of structure

member etc. complete.For Fifth floor.

207 Providing 10 mm. Thick Mala cement plaster in single coat for plastering on 400.00 Sqmt 246.57

ceiling and soffits of stairs and finished even and smooth in : (I) Cement mortar

1:4 (1 cement : 4 sand) including Mala troveled finish with 1x1cm Groves at

juction of structure member etc. complete For Fourth floor.

208 Providing 10 mm. Thick Mala cement plaster in single coat for plastering on 38.00 Sqmt 271.13

ceiling and soffits of stairs and finished even and smooth in : (I) Cement mortar

1:4 (1 cement : 4 sand) including Mala troveled finish with 1x1cm Groves at

juction of structure member etc. complete For Fifth floor.

209 Providing & fixing in position standard extruded Aluminum Four track (30 mm 122.00 Sqmt 4035.96

series) sliding shutters with colour anodized section having Frame Bottom With

Gutter member size 164.00 x 51.00 x 2.00 mm size Weight per Rmt =

Kg(Section no 21198) and Frame top and side membesr size 165.00 x 41.00 x

1.60 mm size Weight per Rmt = 1.694 Kg(Section no 21204) For shutters using

top and bottom size 50 x 30 x 1.31 mm size Weight per Rmt = 0.839 Kg (Section

no 20993) & interlock member size 50 x 30 x 1.80 mm size Weight per Rmt =

0.994Kg (Section no 20550) & handle member size 50 x 30 x 1.60 mm size

Weight per Rmt = 0.731 Kg (Section no20553) Four track sliding Three glass

shutters & one Mosquito net shutters including providing 5 mm thick Transparent

tinted float glass for glazing fixed with Rubber gasket, Air Lock Strip Silicon

Sealant with Standard Extruded Colour Anodized Aluminum Coted fittings and all

required materials labours and equipments etc complete as directed by engineer in

charge For W1,W2.

210 Providing & fixing in position standard extruded Aluminum Three track (30 mm 11.00 Sqmt 4980.31

series) sliding shutters with colour anodized section having Frame Bottom With

Gutter member size 124.00 x 51.00 x 2.00 mm size Weight per Rmt =

Kg(Section no 20928) and Frame top and side membesr size 124.00 x 41.00 x

1.50 mm size Weight per Rmt = 1.197 Kg(Section no 20837) For shutters using

top and bottom size 50 x 30 x 1.31 mm size Weight per Rmt = 0.839 Kg (Section

no 20993) & interlock member size 50 x 30 x 1.80 mm size Weight per Rmt =

0.994Kg (Section no 20550) & handle member size 50 x 30 x 1.80 mm size

Weight per Rmt = 0.809 Kg (Section no20549) Three track sliding Two glass

shutters & one Mosquito net shutters including providing 5 mm thick

Transparent tinted float glass for glazing fixed with Rubber gasket,Air Lock Strip

Silicon Sealant with Standard Extruded Colour Anodized Aluminum Coted

fittings and all required materials labours and equipments etc complete as directed

by engineer in charge For W3.

211 Providing & Fixing in position standard extruded approved colour anodised 13.00 Sqmt 2345.22

Aluminum Ventilator with frame 64 x 25 mm Stander Section (of Jindal Section

No.21458,@ Wt 0.842 kg/Rmt) with 5mm thick fixed Frosted Glass fixed to

alluminium strip blade fixed or adjestable louvers ventilation including all

required materials, fixtures, fastenning, labours and equipments as per detailed

drawing as directed. For Ventilators V.

212 Providing and fixing 35 mm thick solid core flush door shutter with Single shutter 233.00 Sqmt 4047.07

Confirming to IS:2202 & ISI Approved Manufacturer Pivoted door with required

6mm Thick Polished Teak Wood Beading on Periphery, having 1mm thick

laminates on both side, Durable Grip shall be providing with 4 Nos 150mm High

S.S.Hinges, 150mm-200mm long stainless steel handle, Door Stopper and

necessary Locking system of Godrej,fixtures & fastenings etc. directed by

engineer in charge For D1,D2,D3.

213 P & L 60x60 cm'Glazed Vitrified (GVT) Tiles 10 mm thick tile flooring over 10 201.00 Sqmt 1467.72

mm (average) base in Flooring,risers of steps, skirting Dedo and pillars laid on

20mm thick cement mortar 1:6 (1-Cement : 6 coarse sand) and jointed with colour

cement slury mixed with pigment to match the shade etc. complete including

colour approved by directed.(10% Dark Colour).

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

214 P & L 60x60 cm'Glazed Vitrified( GVT) Tiles 10 mm thick tile flooring over 10 69.00 Sqmt 1467.72

mm (average) base in risers of steps, skirting Dedo and pillars laid on over 10 mm

average)base in risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with colour cement

slury mixed with pigment to match the shade etc. complete including colour

approved by directed.

215 P & L 60x60 cm' Soluble Salt Vitrified Tiles 10 mm thick tile flooring over 20 860.00 Sqmt 1471.53

mm (average)base of cement mortar 1:6 (1cement : 6 coarse sand)on new surface

or fixing on existing flooring by adhesive materials including dismentalig of

existing flooring and jointed with colour cement slurry including finished with

flush pointing & cleaning the surface etc. complete including colour approved by

directed.(10% Dark Colour)

216 P & L 60x60 cm' Soluble Salt Vitrified Tiles 10 thick tile flooring over 10 mm 117.00 Sqmt 1592.40

(average)base in risers of steps,skirting Dedo and pillars laid on 10mm thick

cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with colour cement

slury mixed with pigment to match the shade etc. complete including colour

approved by directed.(10% Dark Colour)

217 P & L 30x30 cm. matt finished Ceramic Tiles 6 mm thick tile flooring over 12 mm 60.00 Sqmt 1079.69

(average) base of cement mortar 1:3 (1 cement: 3 coarse sand) on new surface or

fixing on existing flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry with 3mm Groove including Epoxy

Grouting finised with flush pointing & cleaning the surface etc. complete for

Colour and Shade approved by Engineer-In-Charge.

218 P & L size 60 x 30 cm Glazed Ceramic tiles 6 mm thick in skirting risers of steps 919.00 Sqmt 1215.03

and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse sand) and jointed

with colour cement slurry with 3mm&4mm Groove including Epoxy Grouting

finised with flush pointing & cleaning the surface etc. complete for Colour and

Shade approved by Engineer-In-Charge.

219 Providing and fixing polished 18 mm thick Granite stone in Single piece with all 497.00 Sqmt 2205.84

Exposed Edges Polished and Chamfered and Projcted 6mm from finished wall

thickness of approved quality in clading on Cill & Jambs and around the doors/

windows/ ventilation with 12 mm thick cement motor CM (1:4) and fixing with

cement slurry & adhesive including moulding of exposed edges as directed by

engineering in charge etc. complete.

220 Providing and fixing Wall Hung Type Water Closet with Dual Flushing System 17.00 Nos. 16655.91

Type (CERA CAT.No S1041101(CARAT) Ceramic Material Snow White ) with

integral P and S trap including jointing the trap with soil pipe in cement mortar 1:1

(1 cement five sand) including providing and fixing rubber buffers back plastic

seat cover of CERA for WC with CP brass hinges and including a pair of C I or

MS bracket with complete fitting such as lead valve siphon 32 mm dia flush cock

(Jaquar FLV-1089G), Angle Cock (Jaquar CAT.No - 5053N), Health Faucet

(Jaquar ALD-573) with flush bend including cutting holes in walls and making

good the same connection the flush bend as directed by engineering in charge etc.

221 Providing and fixing Washbasin Table Top (CERA CAT.No S2030105 Ceramic 13.00 Nos. 8269.88

Material Snow White) with Pillar Cock (Jaquar CAT.No 5011N) and Bottle Trap

(Jaquar ALD-769) with including cutting holes and making good etc completed by

Engineer in charge

222 Providing and fixing Over head shower (OHS-CHR-497N) of jaquar brand with 18.00 Nos. 12730.04

Shower Arm of 20mm Dia & 450mm Long Round(SHA-CHR-479L450) and

Single Lever Exposed Parts KIT of Divert (OPP-CHR-15065NKPM) with

Concealed Body for ALD-CHR-065N and OPAL PRIME SPOUT WITH WALL

FLANGE (SPJ-CHR-15429PM) or its equivalent brand as directed engineer-in-

charge etc. complete.

223 Providing and fixing Bib Tap (ARIA Series) of jaquar brand with Top Lever, 34.00 Nos. 1974.55

Brass Body, with Wall Flange or its equivalent brand as directed engineer-in-

charge etc. complete.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

224 Providing and fixing M.S. Box Sections (75 mm x 50mm x 3mm) with clear 119.00 Sqmt 2601.76

spacing 100mm including fixed on frame of section (100 mm x 6 mm) frame on

four side and Openable Arrangement For Maintenance , all M.S. louvres section

should be Powder Coated M.S.louvres Whole assembly for ventilation & for cut

the vision will be fitted in position including accessories as per requirement as

directed by Engineer-in-charge etc. complete.

225 Providing and fixing 316 grade S S hollow pipe Hand railing into 10cm thick & 315.00 Kgs. 589.84

100cm Hight RCC wall @ on top 50 mm dia (16Gauge) horizontal pipe and

vertical support railing with all material, laboure charges and accessories

requirement as directed by Engineer-in-charge etc. complete.

226 Providing & fixing Abharay Wooden cupboard of Required size using 19mm 152.00 Sqmt 3630.95

thick ply & shutters are of 25mm thick ply all proof with teakwood batten &

mm laminate in single or double shade & colour as directed on all visible face and

0.80 mm white lamination on all non visible faces including SS fixtures &

fastening, Godrej lock etc. good quality as directed by engineer-in-charge etc.

227 Wall Punning : Providing and applying Plasto XP Gypsum Plaster (USG Boral) or 2540.00 Sqmt 238.36

equivalent make, minimum 12 mm thick in wall and minimum 6mm thick in

ceiling, including all labours, tools, tackels, scafollding, surface preparation,

mixing of material, transportation (lead & lift) applying in position, levelling,

finishing, cleaning etc. complete to satisfaction of Engineer in charge. The rate

also include making of Grooves above skirting, Dedo Tiles and around window

and door jambs etc. (cost of bonding agent to the ceiling or RCC surfaces is to be

included in the item) item shall be used as per instruction of engineer in charge.

228 TEXTURE PAINT: Texture paint (Insider and outside) :Wall/ Ceiling painting 744.00 Sqmt 1667.51

two coats (1 base plus 1 texture) with low VOC as per approved brand in any

shades and colour as directed on wall surface to give an even shade including

applying coat of putty, Penetrating primer or equivalent and two coats of paint,

scaffolding to at any height with all labour and material thoroughly brushing the

surface free from mortar droppings and other foreign matter and sand prepared

smooth etc. complete. The substrate must be sound, clean, dry, free from dust, oil,

grease and laitance etc. All traces of release agents must be removed. On chalky

and dusty surfaces, all loose material must be removed by stiff bristle brushing.

The primer/ paint application is to be done with the rollers. Rate shall be including

crack filling and levelling as per manufacturers specfication. Top coat should

have. 1) Low VOC content. 2) Crack Bridging ability upto 2.6 mm. 3) 100% pure

acrylic emulsion. 4) Anti-Carbonation concrete protection. 5) Very Low Flame

spread. 6) Superior Washability.

229 P & L 60 X 60 CM. Double Charged Vitrified Tiles 8 & 10mm Thick Tiles riser 57.00 Sqmt 1471.53

of steps,skirting dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-

cement 3-coarse sand) and jointed with color cement slurry mixed with pigment

to match the shade of slab including finised with flush pointing & cleaning the

surface for antiskid mat finised etc. complete. and 10% Dark Colour Tiles for

Pattern and Colour Shade approved by Engineer-In-Charge.

230 P & L 60 X 60 CM. Double Charged Vitrified Tiles 8 & 10mm Thick Tiles riser 7.00 Sqmt 1592.40

of steps,skirting dedo and pillars laid on 10 mm thick cement mortar 1:3 (1-

cement 3-coarse sand) and jointed with color cement slurry mixed with pigment to

match the shade of slab including finised with flush pointing & cleaning the

surface for antiskid mat finised etc. complete. and 10% Dark Colour Tiles for

Pattern and Colour Shade approved by Engineer-In-Charge.

231 P & L 60x60 cm. Matt Finished Porcelain Tiles 6 mm thick tile flooring over 10 6.00 Sqmt 1090.32

mm (average) base of cement mortar 1:3 (1 cement: 3 coarse sand) on new

surface or fixing on existing flooring by adhesive material including dismentaling

of existing flooring and jointed with color cement slurry with 3mm Groove

including Epoxy Grouting finised with flush pointing & cleaning the surface etc.

complete for Colour and Shade approved by Engineer-In-Charge.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

232 P & L 60x30 cm. Digital Printed Glazed Ceramic Tiles 6 mm thick in skirting 69.00 Sqmt 1513.28

risers of steps and dedo on 10 mm thick cement plaster 1:3 (1-cement:3coarse

sand) and jointed with colour cement slurry.

233 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not 8.00 Nos. 958.17

less than 35Kg.

234 Providing & erecting open well horizontal mono block pump set with cast iron 4.00 Nos. 22119.00

body, complete for three phase submersible motor having [D] For 5 HP 3 phase

open well horizontal mono block pump set suitable for 1350 LPM to 310 LPM @

10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe cat-ll

235 Supplying & erecting approved make motor control cubical panel (Direct - on - 4.00 Nos. 10276.75

line) made from 16 G. CRCA sheet duly epoxy powder painted inside and outside

with hinged doors and locking, arrangement consisting of suitable size of ON-

OFF isolator (AC - 3/23duty) main fuses, single phasing preventer, indicating

lamps for R- Y - B phases, overload relay, Automatic water level controller,

Ammeter, Voltmeter each with two way selector switch incoming, wires duly

socket crimped, main contactor & overload relay, start - stop push buttons, to be

erected on angle iron frame grouted on wall as directed. The isolator, overload

relay & contactors will be of L & T, Siemens or BCH make only. (A) DOL up to

236 Providing and fixing rolling shutters of approved make made of 80 mm wide M.S 26.00 Sqmt 3554.40

laths inter-locked together through heir entire length and jointed together at the

ends by end locks mounted on specially designed pipe shaft with bracket

plates,guide channels and arrangement for inside and outside locking with push-

pull operation including the cost of hood cover and sprig etc.complete (A)

Shutters having width below 3.5M.

237 Drilling in soil with lowering of pipes concrete sealing including gravel packing 900.00 Rmt 393.90

clay breaking and development of bore with air compressor by required capacity

vertical test etc. complete including the cost of benimeter 250mm dia.

238 Supplying slotted PVC pipes of approved quality at site of work confirming to IS. 480.00 Rmt 555.50

239 Supplying PVC plain pipes of approved quality at site of work confirming to IS. 420.00 Rmt 494.90

240 Providing and erecting ISI marked PVC insulated PVC Sheathed Flat flexible 1050.00 Rmt 146.45

Submersible copper cable approved make of following Size. (B) 3 Core x 2.5 Sq.

241 Supplying submersible pump set suitable for bore of 150 mm. dia. or more having 7.00 Nos 33557.25

three phase motor capacity not more than 7.5 H.P. with following capacity (B) (8

stage) 390 to 350 LPM discharge at 62 to 70 mtrs. head respectively suitable for

50mm dia. delivery pipe Cat.III.

242 Lowering of submersible motor pump set at the depth of following ,complete with 7.00 Per 2568.43

required Nos. and size of casing pipes erected by means of proper chain pulley

block & pipe wrenches after checking of threads of each pipe with coupling to

take the load of the pump set and pipe assembly filled up with water (B)Above

mtrs. and Up to 120 mtrs.

243 Providing and fixing to wall ceiling and floor HDP pipes tubes (medium grade) of 700.00 Rmt 513.08

the 50mm nominal bore, tube, fittings and clamps include. Making good the wall

ceiling and floor. (F) 50mm dia.

244 Providing and fixing gun metal cock of non return full way wheel valve.(F) 50mm 7.00 Nos. 959.50

245 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 2800.00 Rmt 339.05

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(G)110 mm.

246 Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure 400.00 Rmt 721.14

poluthene pipes of the following outside Dia. Low densidy, complete with special

falnge compression type fittings, wall clipsetc. including making good the wall

ceiling and floor.(G)160 mm.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

247 Providing junction for rain water juncton chamber of size 0.60x0.60x0.75m with 20.00 Nos. 6544.80

excavation of size 1.96x1.96 m & 0.15m thick c.c.1:2:4 bed concrete including

brick masonary wall in CM 1:6 of 0.75m height & 0.23m thick with 15mm thick

cement plaster inside & outside & 1.06x1.06 RCC (1:2:4) slab of thickness 0.15m

with CRS steel and 0.60mx0.45m cast iron manhole cover with frame weight not

less than 35 kg as per directed by Engineer-in-charge.

248 Providing Filter chamber of Brick work in C:M 1:6 of size 2.06mx1.20m x1.20m 4.00 Nos. 18562.79

& excavation dimension of 2.82mx 1.96x1.35m including C.C 1:2:4 bed concrete

of 0.15m thick including brick work in c.m 1:6 for 23cm thick wall including

15mm thick cement plaster inside & outside with cement slurry & 10cm thick

RCC 1:2:4 top cover with frame of minimum weight of 35 kg & filling filter

material kapchi in layers (25-40mm & 10-20mm) & BT metal 40mm & sand as

per directed by Engineer-in-charge.

249 Constructing brick masonry chamber for underground C.I. Inspection chamber 10.00 Nos. 7180.44

and bends with briocks having croshing strength not less than 35Kg. Cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions, total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x

850 mm and 450mm deep for pipe lines with three or more inlets.

250 Providing and laying cement concrete 1:4:8 (1- Cement : 4- Coarse sand : 8- 225.00 Cumt 2745.38

graded stone aggregates 20 mm nominal size) and curing complete excluding cost

of formwork in (A) Foundation and Plinth.

251 Providing and laying cement concrete 1:2:4 (1- Cement : 2- Coarse sand : 4- 278.00 Cumt 3741.69

graded stone aggregates 20 mm nominal size) and curing complete excluding cost

of formwork in (A) Foundation and Plinth.

252 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete 1917.00 Rmt 374.92

block 30cm length,30cm height and 15cm thick of M250 grade concret as per

approved design and including excavation for fixing in proper line and

level,filling the joint with C:M 1:3 (1cement:3fine sand) etc. complete.

253 Excavation for foundation 3.00 mt to 5.00 mt depth including sorting out and 1071.00 Cumt 184.77

stacking of useful materials and disposing the excavated stuff all lead and lift. (B)

Dense or hard soil.

254 Providing and laying controlled cement concrete M-250 and curing etc. complete 307.00 Cumt 7316.44

including the cost of form work with Ply & Cuplock but excluding the cost of

reinforcement for reinforced concrete work in RCC Vertical and Horizontal Wall

Upto Plinth and Ground Floor.

255 Providing and laying weep hole in Aburtments, and returns by using A.C. pipe 189.00 Nos. 89.20

of 100mm including laying in proper grede and jointing the completed as per

detailed specification.

256 Constructing,Providing and Fabricating cattle trap using channel section frame of 36.00 Sqmt 5259.07

size ISMC series 100m x 50 mm (Weight 9.20 kg/Rmt) and ISMC I Section

mm x 75mm (Weight 11.50 kg/Rmt) 1mt C/C Intermediate Support for welding

G.I. Pipe at 12 cm of size 50mm dia Heavy duty in a frame made of channel

section of 100mm x 50mm all round including fixing the urit on prepared chamber

of masonary wall using MS hold fast embeded in masnary wall top as directed by

Engineer in charge as per drawing by necessary arrangement etc.complete.

257 Providing and fixing decorative entrance gate made out of cast iron and various 2700.00 Kgs. 181.80

mild steel tabular section combination , the Ornamental entrance gate should be

fixed at compound wall including pattern and die making , cutting , welding

grinding, fabrication , fixing in position at compound wall with necessary

pedestal, bearing block and other locking arrangement. The entrance gate should

be painted with two coats of priming coat of paint, and two coat of oil paint etc

complete. As per detail design and instruction of architect.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

258 Providing and fixing concertina coil fencing with punched tape concertina coil 555.00 Rmt 359.56

600 mm dia 10 mt openable length having 50 no rounds per 6 mt length, upto 3mt

height of wall with angle iron (50mm x50mm x5mm) requird shaped As per

Directed Engeenier in charge. placed 2.4mt or 3.00mt apart and with 4 horizontal

R.B.T. reinforced barbed wire (3 mm), stud tied with G.I. staples and G.I. clips to

retain horizontal, including necessary bolts or G.I.barbed wire tied to angle iron,

all complete as per direction of Engineer-in-charge, with reinforced barbed tape

(R.B.T.)/Spring core (2.5 mm thick) and weight 43.478 gm/meter at compound

wall for ESR M4/ intakewell.

259 Box cutting the road surface to proper slope and camber for making a base for 2683.00 Cumt 109.41

road work including removing the excavated stuff and depositing on the road side

slope as directed upto 50Mt.lead.

260 Construction of granular sub-base 150 mm thick by providing coarse graded 1032.00 Cumt 686.80

machine crushed B.T. material satisfying MOST specification of grading I (B.T.

stone aggregate 53 mm to 26.5 mm 35 %, 26.5 to 4.75 mm - 45 % and 2.36 mm

below - 20%) including spreading in uniform layer with motor grader on prepared

surface, mixing by mix in place method with rotavator at OMC and compacting

with vibratory roller to achieve the desired density etc. complete.

261 Providing and laying wet mix macadam base course 250 mm thick using machine 1032.00 Cumt 814.06

crushed B.T. chips as per required gradation mixing with required optimum

quantity of water, conveying the mix to site of work, spreading in to grade and

camber with mechanical paver and consolidation each layer with vibratory roller

including cost of material labour plant and equipment etc. complete.

262 Providing &laying ave. 200 mm thick M-250 grade of controlled cement concrete 826.00 Cumt 5881.23

including dressing sub base providing and laying 200 micron thick LDPE

memberance over prepared sub base providing and mixing recron 3s fiber at

gm/cmt. of concrete placing the concrete and leveling with surface vibrator

finishing the surface with power floater and trowel light brooming on the surface

as directed including Providing and filling exparsion joint having size 20 mm x

115 mm & filling the expansion joint having size 20 mm x 20mm by using cloper -

200 as per manufacturer's specification and making construction joint having size

10 mm x 10mm by using concrete cutter machine etc. complete.

263 Providing, laying (to level or slopes) and jointing reinforced concrete Light duty 524.00 Rmt 659.99

non-pressure pipes I.S. class NP3 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (i)

264 Clearing and grubbing road land including uprooting rank vegetation grass 1.60 Hect 28455.09

bushes,shrubs,sapling and trees girth up to 300 mm removal of stumps of trees cut

earlier and disposal of unserviceable materials (C) By mechanical means in area

of light jungle.

265 Earthwork in cuting in all sorts of soil and soft murrum including conveying and 413.00 Cumt 134.63

spreading the stuff, embankment as and where directed within 200meters from the

end of the cutting with all required lead and lift.

266 Earthwork for embankment including breaking clods, dressing with all lead and 30864.00 Cumt 169.28

lift (excluding watering and consolidation)(E) From Borrow area within 3.0 Km.

267 Rolling of earthwork in layers with power roller including filling in depressions 31277.00 Cumt 23.12

which occur during the process and Watering of earth work as directed.

268 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete 506.00 Rmt 593.79

block 30cm length, 45cm height and 15cm thick of M200 grade concret as per

approved design and including excavation for fixing in proper line and level,

filling the joint with C:M 1:3 (1cement:3fine sand) etc. complete.

269 Supplying of yellow or Goradu soil with all lead and Lift including spreading 1311.00 Cumt 169.28

watering dressing and rolling with hand roller etc complete Selected soil.

270 Supplying of well rotted FYM manure with all lead and Lift including spreading 197.00 Cumt 303.00

mixing dressing and rolling with hand roller etc. complete.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

271 Scarifying the surface of Soil including spreading of DAP fertilizer mixing with 4369.00 Sqmt 15.15

Soil properly levelling gand dressing of the plot.

272 Supplying and planting Dibbing semi carpet lawn at distance of abour 15 cm x 15 4369.00 Sqmt 25.25

cm after proper anti termite teratment amd rolling the seme by hand roller amd

wetering etc complete.

273 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 35.35

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith of soil

packed in polithyline bag or Earthern pot. Including organic & chemical fertilizer

Pesticides, fungicides, hormones & maintaining the plants up to three months as

deserted. Bottol palm.

274 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 50.50

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as deserted Trinagle Plan.

275 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 50.50

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as Jasud

276 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 70.70

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as Croton

277 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 50.50

height 3 to 4 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as deserted Croton

278 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 45.45

height 3.5 to 4.5 ft or Height ad per Landscaps Plan with natural growith and

nature colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as deserted Croton

279 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 15.15

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as deserted Croton.

280 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 25.25

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as deserted Durenta Varigated.

281 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 50.50

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as deserted Crotons Variety.

282 Bowing and developing flowering plants grown in nusery having approximate 1000.00 Nos. 20.20

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as deserted green mahindi.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

283 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 45.45

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants uo to three months as deserted Varigated Ficus.

284 Bowing and developing flowering plants grown in nusery having approximate 100.00 Nos. 20.20

height 4 to 5 ft or Height ad per Landscaps Plan with natural growith and nature

colour planted in alump of soil packed in polithyline bag or Earthern pot.

Including organic & chemical fertilizer pesticides, fungicides hormones &

maintaining the plants up to three months as deserted New block ficus.

285 Labour charges for planting various plants after proper anti termite treatment in 2100.00 Nos. 20.20

pits including placing property and filling the pit with requred prepared mix soil

and wetering and dispporting etc complete.

286 Maintenace of Lawn and flower bed and plants include loosening soil,regular 4369.00 Sqmt 20.20

watering weeding,regular trimming/training,mowing of lawns twice a month with

all labor ,tools and tackles etc. for a period of one Year

287 Maintenance of Planted tree upto one year incl watering digging pilts rimming 2100.00 Nos. 151.50

applying fertilizer, insectiside, Pestiside and Pestisides and replacing plants if

necessary etc. complete for raising of plants weeding or soil working also incl

mainting water supply lines and drip lines of plantation (water and Electricity

supply by Deppt)

288 Rubber Hose pipe 15 mm dia of approved brand and make. 200.00 Rmt 25.25

289 Providnig and fixing G I Nipple as directed. 25.00 Nos. 20.20

290 Providing & fixing Wall Cupboard Shutter of size 1.80 x 2.10 x 0.45 mt. made of 23.00 Sqmt 2374.51

19 mm thick allproof plywood which BWR confirming to IS 710 of green or

century make, designs & grooves as directed by architectural drawings including

Four shutter size of 0.45 x 2.10 mt and lamination of 1.0 mm thick in single or

double shade of green, broom or equivalent make of plain or texture finish as

directed on all visible face including on teak wood batten patti and 0.80 mm white

lamination on all non visible faces & remaining faces. S.S. Decorative handle,

S.S.stopper, good quality lock with necessary fixtures & fasteners of standard

make as per detail drawing and image also including all labours as approved by

engineer-in-charge etc. complete.

291 Providing & fixing Library Table of size 1.75 x 0.90 x 0.75m(H) using 19 mm 79.00 Sqmt 4560.15

thick allproof plywood of BWR confirming to IS 710 of green or century make,

designs & grooves as directed by architectural drawings, lamination of 1.0 mm

thick in single or double shade of green, broom or equivalent make of plain or

texture finish including necessary khili make adhesive etc. of suggested brand by

engineer-in-charge teakwood foot rest of size or size as directed, necessary

teakwood beading of Indian teakwood including all cost of material, labours

mm lamination in single or double shade & colour as directed on all visible face

and 0.80 mm white lamination on all non visible faces as directed by engineer-in-

charge etc. complete.

292 Reading or Visitor Chair with P type handle, Non revolving oval shape with metal 754.00 Nos. 2323.00

steel powder quoted chair. Overall size: W-70 x D-70 x H-113-123 (cm) Chairs

are tested by approved Laboratories & Certified by International Agency BIFMA

confirming to ANSI/BIFMA X 5.1- 2002 on functional requirement.

293 Providing and Placing Library Storage cabinet including following : Glass Door 45.00 Nos. 19745.50

cabinet with 4 adjustable shelves, 2 door with 4 glass panels and lock, S.S.keys in

duplicate. All steel parts of the cabinet will be (20/22 swg.) CRCA IS 513 'D'

grade 10 tanks antirust treated Standard powder coating in in-house plant. Overall

size: H-1980 x W-915 x D- 485 (mm) as per directed by engineer in charge.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

294 Supplying and fixing Notice board made from teak wood size of board is 1.95 x 19.00 Nos. 3487.53

0.90 x 0.05 with 3mm plain glass door including thermocole coated inner side

with velvet cloth upper side also including backside 9mm thick allproof ply and

polishing including necessary handles locking arrangment as directed by engineer-

295 Providing and Placing Indian Teakwood Paper Rack with 2 Steps Horizontal & 2.00 Nos. 3403.70

Vertical Support are complete with Polishing & Moulding for corrosion resistant

for a longer life. Size: (L) 75 cm x (B) 60 cm x (H) 75 cm. All works shall be

carried out as per directed by engineer in charge. Minimum section of Rack for (i)

Vertical 50mm x 50mm (ii) Horizontal long side 50mm x 50mm (iii) Horizontal

short side 50mm x 50mm (iv) Horizontal shelf 30mm x 25mm.

296 Providing and fixing single bed size 0.90 x 1.90 mt using Side of bed size 35 cm 320.00 Nos. 13299.68

with double 19mm thick plywood all proof, 19 mm thick plywood bottom and

12mm thick plywood Top surface & back of size 0.9 mt x 0.60 mt all proof of

good quality including fixing 1mm thick lamination sheet on all Visible surface

and 0.8 mm Thick Lamination Sheet on hidden surface on plywood with fixing

teakwood bedding including nails, fevicol, Handel, Hinges, polishing including

labour etc as directed by Eng. in charge complete.

297 Supplying Mattresses of size 1.80 mt x 0.79 mt using springwel Magic, Sleepwell, 324.00 Nos. 5581.26

Curlon or equivalent quality foam of 40 density and 4" thick including madarpat

cover, 150Gsm Cotton quilt covering Mattress & Pillow size - 0.69 mt x 0.45 mt

with features like Non-allergic microfibre polyfill pillow & minimum 660Gsm and

print Department logo on all things as approved and suggested by engineer-in-

charge etc. Complete.

298 Supplying Single Bed Chadar or Bed Sheet of size 1.40 mt x 2.40 mt & pillow 324.00 Nos. 755.48

cover size 0.45 mt x 0.69 mt Bombay Dyeing Cardinal or its equivalent quality

and print Department logo on all things as suggested and approved by engineer-in-

charge etc. complete.

299 Supplying all weather cotton rajai/ blanket of size 1.40 mt x 2.40 mt of Bombay 328.00 Nos. 813.05

Dyeing or its equivalent quality and print Department logo on all things as

suggested and directed by engineer-in-charge etc. complete.

300 Provinding & Supplying of SS Dining Table size : L 2.40 mt x W 0.90 mt With 26.00 Nos. 26133.75

Stool and Product is made up of good quality. This Canteen Dining Table boasts

of everlasting shine, wonderful appearance and is perfectly applicable for dining.

Features:-• High durability • Long life • Outstanding quality • Number Of Seater

Seater • Frame Material Stainless Steel • Surface Finish SS Finish • Set Contains

With Stools • Shape Rectangular • Color Silver • Usage/Application Canteen,

Mess • Design Type Customized as approved or directed by the authority and

approved by the Engineer in charge.

301 Providing and fixing double bed size 1.90 mt x 1.90 mt using Side of bed size 2.00 Nos. 21228.18

35cm with double 19mm thick plywood all proof, 19 mm thick plywood bottom

and 12mm thick plywood Top surface & back of size 1.90 mt x 0.60 mt all proof

of good quality including fixing 1mm thick lamination sheet on all Visible surface

and 0.8 mm Thick Lamination Sheet on hidden surface on plywood with fixing

teakwood bedding including nails, fevicol, Handle, Hinges, polishing including

labour etc as directed by Engg. charge complete.

302 Providing and Placing Three seated sofa of size 1605 x 760 x 840 mm. The 2.00 Nos. 17422.50

structure of sofa shall be made from teak wood framing and 9 mm thick

waterproof plywood finishing as per design, including upholstered with 150 mm

thick 40 density U-foam for seat and 100 mm thick 40 density U-foam for backrest

and covering both with best quality tapestry of approved colour and design side

handle with teakwood of approved design and exposed surface shall be polished

with melamine finishing to the wooden work etc.as directed by engineer-in-charge

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

303 Providing and Placing two seated sofa of size 1300 x 760 x 840mm. The structure 2.00 Nos. 14518.75

of sofa shall be made from teak wood framing and 9mm thick waterproof plywood

finishing as per design, including upholstered with 150mm thick 40 density U-

foam for seat and 100mm thick 40 density U-foam for backrest and covering both

with best quality tapestry of approved colour and design side handle with

teakwood of approved design and exposed surface shall be polished with

melamine finishing to the wooden work etc. complete as per drawing.

304 Providing and fixing Tepoy (Centre and Corner Table) of size up to 0.90 m x 0.60 1.00 Sqmt 6250.89

m x 0.45 m and top 12mm toughened glass of size up to 0.85 m x 0.55 m with teak

wood legs, side &shaport including all faces polishing work as directed by

engineer-in-charge. Minimum section of tepoy for (i) leg 50mm x 50mm (ii)

Horizontal long side 50mm x 50mm (iii) Horizontal short side 50mm x 50mm

(iv)Horizontal bottom support 30mm x 25mm.

305 Providing & fixing Fix side box for bed side 0.76 x 0.45 x 0.45m with two 4.00 Nos. 4480.36

drawers using 19mm thick plywood all proof with using 1mm thick lamination

sheet heavy quality channels including all labour as directed etc. complete.

306 Providing and Placing Steel Cupboard with following : 1. Dimension: Overall size 30.00 Nos. 10453.50

• Height: 1980 mm • Width: 916 mm • Depth: 486 mm 2. Construction &

• CRCA Sheet for shelf & anodized screws.

• Welded construction.

• 0.8 thickness High yield strength CRCA for doors and back.

• 0.9 thickness for all other components.

• CRCA ‘D’ grade as per IS:513

3. Locking & Handle:

• Three way locking mechanism with shooting bolt.

4. Shelving : • Height wise adjustable shelf mounting.

• Maximum uniformly distributed load capacity per each full shelf is at least 80kg.

• 4 Nos. of adjustable shelf mounting.

5. Finish: • Epoxy powder coated to the thickness of 40-60 microns after 10 dip

tank pre treatment, including anti rust treatment.

• All Dents, Burns and Sharp edges will be removed from the various components.

• The components will be individually pickled, scrubbed and rinsed to remove

grease, rust scale or any other foreign element. • The finish will be smooth and

uniform. The finish will be free from all visible defects.

• All the edges will be rounded.

• All Almirah will be supply in Prince Grey Color.

as per directed by the Enginneer-in-Charge.

307 Providing and placing Open type Storage Rack with following : Size: 2130 (H) X 40.00 Nos. 4646.00

1. Rack with 5 Compartments of 6 nos. of shelves. Distance between each shelf

will be 410 mm. These

6 shelves will be hanging arrangement (adjustable).

2. Racks will be manufactured from Slotted M.S angle 2 mm thk.

3. Shelves will be manufactured from 0.9 mm thick sheet.

4. The rack will be assembled with G I bolt, nuts and washers.

5. Slotted angle and M.S sheet will be made of cold rolled with 10 tanks anti-rust

treated and will be finished with powder coating. .(Colour prince Grey) or as

6. H/D Rubber bushes will be provided to the bottom of legs of slotted angle

7. The quality of M.S sheet which is used for racks will be free from any defects,

Undulations, and old paints and surface corrosion, etc. as directed by Engineer in

chargeetc. complete.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

308 Providing & fixing Study Table Size 1.05 x 0.60 x 0.75m made of 19 mm thick 202.00 Sqmt 10025.26

allproof plywood of BWR confirming to IS 710 of green or century make, designs

& grooves as directed by architectural drawings. Lamination of 1.0 mm thick in

single or double shade of green, broom or equivalent make of plain or texture

finish as directed on all visible face including on teak wood batten patti and

mm white lamination on all non visible faces with all side decorative border upto

100 mm thick for good appereance. All should be complete with teakwood

support & legs including nails, fevicol, polishing on hidden surface including

labour etc as directed by Engineer in charge complete.

309 Supplying Matresses of size 1.95 mt x 1.95 mt using springwel Magic, Sleepwell, 2.00 Nos. 8595.10

Curlon or equivalent quality foam of 40 density and 4" thick including madarpat

cover & Pillow and print Department logo on all things as approved and suggested

by engineer-in-charge etc. complete.

310 Supplying Double Bed Chadar or Bed sheet of size 2.40 mt x 2.40 mt & two 2.00 Nos. 1452.38

Pillow cover size 0.45 mt x 0.69 mt Bombay Dyeing Cardinal or its equivalent

quality and print Department logo on all things as suggested and approved by

engineer-in-charge etc. complete.

311 Providing,supplying and fixing eyelet type Fabric curtain for window/ventilation 701.00 Sqmt 1189.78

of required size.The cloth of curtain shall be clear opening of window/ventilation

with approved standard quality and shade (like SJ(jiya forever), D'Décor,GM or

equivalent brand). The item includes Aster cloaths of best quality,S.S. pipe (304

Grade) of 25mm dia of required length,end and intermediate S.S. brackets of

required size and S.S. socket of best quality,ring with S.S. coating,eyelet

belt.Fixing with all fittings & perfect operated work including with required all

labour and equipment as per directed with all lead and lift.

312 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm 1129.00 Sqmt 1674.15

Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have, light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity0.043° w/m KC.for the best thermal Insulation. The Light weight calcium Silicate

tile shall be of approved texture Fine fissured/ Spintone/ Cosmos having NRC value of 0.5 & Globe having

NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended

inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including

both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24 X 38mm

made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24 X 28mm made

out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main 'T' at 600mm centre to centre to

form agrid of 1200x600mm and size 24x48mm made of 0.30mm thick (Minimum) sheet to be interlocked at

middle of the 1200x600mm panel to form grid of size 600x600mm resting on periphery walls/partitions on a

perimeter wall angle pre-coated steel of size (24x24x3000mm made of 0.40mm thick (minimum) sheet with

the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and

laying 15mm thick densified edges light weight calcium silicate ceiling tiles of approved texture (Fine

fissured/Cosmos/ Spintone) in the grid including cutting/making opening for services like diffusers, grills, light

fittings, fixtures, smoke dtectors etc., wheneveer required, Main 'T' runners to be suspended from ceiling using

G.I. slotted cleats of size 25x35x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasterners,

4mm G.I. adjustable rods with galvanized steel evel clips of size 85x30x0.8mm, spaced at 1200mm center to

centre long main 'T' bottom exposed with 24mm of all T-sections and also provide additional frame work and

suspended G.I. support as required height shall be pre-painted with polyester baked paint, for all heights, as

per specifications, drawings and as directed by engineer-in-charge. Note:- Only calcium silicate false ceiling

area will be measured from wall to wall. No deducation shall be made for exposed frames/opening (cut outs)

having area less than 0.30sqm. The calcium silicate ceiling tiles shall fissured/Spintone/Cosmos and 0.75 NRC

for Globe, light reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity resistance and also

having thermal conductivity. 0.043 w/m KC for the best thermal Insulation.

313 Supplying and Placing Silent PP high efficiancy remote blower, consisiting of 2.00 Nos. 76659.00

continuous rating motor and chemical resistant impeer. Construction: Chemical

and heat resistant PP blower with aerodynamically balanced impeller, with drain

plug. Air Suction Capacity : 1000 CFM confirming to international face velocity

norms as per safe fume hood air flow pattern. Motor: 'Crompton' make

RPM, 2 HP motor (3 phase) direct drive.

314 Supplying and placing Chemical resistant FRP 20mm dia duct work with weather 100.00 Rmt 5342.90

proof canopy, total ducting includes flanges, bends, bracketed supports and

gooseneck exhaust stack.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

315 Providing and placing Indian teakwood Stool Legs & support should be made 120.00 Nos. 1794.77

from teak wood & top is made from 19mm all proof ply IS 710 including 1mm

lamination sheet on top and remaining porition with good quality polishing stool

Size: (L) 30 cm x (B) 30 cm x(H) 90 cm. All works shall be carried out as per

directed by engineer in charge.

316 Providing & fixing Computer Table of size 0.90 x 0.60 mt & height 0.75 mt for 25.00 Sqmt 14807.61

work station using 19 mm thick allproof plywood of BWR confirming to IS 710 of

green or century make, designs & grooves as directed by architectural drawings,

lamination of 1.0 mm thick in single or double shade of green, broom or

equivalent make of plain or texture finish including necessary keyboard drawer,

stand for CPU size 50 x 30 cm or size as directed, necessary SS Screws, handles,

magnet, hinges, khili, cable passing arrangement, drawer lock of godrej make also

including telescopic channel of hetthich, sleek or efficient make, teakwood foot

rest of size as directed, necessary teakwood beading, melamine polishing to

exposed edges inclding 1 mm lamination for all visible faces & white 0.8mm

lamination on bottom or non visible faces as directed by engineer-in-charge etc.

317 Providing & Supplying Executive High Back Revolving Chair office chair of 1.00 No. 20907.00

make size with high back (25 mm thick U foam inside) on Mild steel crome plated

base anti tilt mechanisum frame High quality product, Tilt mechanism with

tiltlocking , moulded foam seat & back penumatic height Adjustment Upholstered

in high quality double leather Swivel Mechanisum & Twin wheel casters with

Great finish, Dimensions in mm seat Height 470mm to 550mm Width 28'inch &

depth 25'inch height 21'inch , decorative wooden with dunlop sheet arms - its

lowest height is 36 inches and heighest is 41 inches Product, Made from strong

sturdy material and colour as per suggested by Engineer in Charge or image. Chair

should confirm ANSI BIFMA Standards.

318 Providing & Supplying Executive Table having size of 2100 mm X 900 mm 1.00 No. 24705.61

X750mm (Height) with Top 12mm toughened glass in required size including

three drawers and 1350 mm X 400 mm X550mm (Height)Side Rack with three

shutter storage cabinet teakwood leg support and 1 mm lamination in single or

double shade & colour as directed on all visible face and 0.80 mm white

lamination on all non visible faces Hettich make telescopic sliding channel, Enox

make S.S. sliding rail, S.S. Decorative handle, Ebco make Keyboard tray with

necessary fixtures & fasteners of standard make as per detail drawing and image

also including all labours as approved by engineer-in-charge etc. complete.

319 Providing & fixing class room table of size 1.20 x 0.60 mt & height 0.75 mt for 20.00 Nos. 7629.54

work station using 19 mm thick allproof plywood of BWR confirming to IS 710 of

green or century make, designs & grooves as directed by architectural drawings,

lamination of 1.0 mm thick in single or double shade of green, broom or

equivalent make of plain or texture finish including necessary 1 drawer of size

x 50 cm or as directed, necessary SS Screws, handles, hinges, khili make adhesive

etc. of suggested brand by engineer-in-charge teakwood foot rest of size as

directed, necessary teakwood beading , melamine polishing to exposed edges

including all cost of material, labours with all lead & lift including 1 mm

lamination on all visible faces & 0.8 mm lamination on bottom and non visible

faces as directed by engineer-in-charge etc. complete.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

320 Providing & fixing Wall Cupboard of size 0.90 x 3.00 x 0.60 mt. made of 19 mm 122.00 Sqmt 6972.03

thick allproof plywood which BWR confirming to IS 710 of green or century

make, designs & grooves as directed by architectural drawings including two

drawers size of 0.45 x 0.55 x 0.15 mt, two shutter size of 0.45 x 3.00 mt and

19mm thick allproof plywood which BWR confirming to IS 710 of green or

century make self fixing at horizontal and vertical support and lamination of

mm thick in single or double shade of green, broom or equivalent make of plain or

texture finish as directed on all visible face including on teak wood batten patti

and 0.80 mm white lamination on all non visible faces & remaining faces.

Telescopic sliding channel made of Hettich or equivalent, S.S. sliding rail made or

equivalent, S.S. Decorative handle, S.S.stopper, S.S.pipe, good quality lock with

necessary fixtures & fasteners of standard make as per detail drawing and image

also including all labours as approved by engineer-in-charge etc. complete.

321 Providing and placing Three seater desk cum bench with following :- Three 110.00 Nos. 5575.20

seater desk cum bench with backrest for senior students.

Overall size : H-785 × W-1500 × D-835 (mm) Seat Height : 460 mm

MOC - 25 mm x 25 mm x 16 swg thick MS ERW pipe with powder coated for

under and backrest structure, Top, Seat and Backrest of 18 mm Ply with both Side

1mm thick laminate and PVC safety shoes provided at the bottom of the legs etc.

completed as directed by Engineer in charge etc. complete.

322 Providing and placing Indian teakwood Rack with 2 Steps Horizontal & Vertical 3.00 Nos. 3403.70

support are complete with Polishing & Moulding for corrosion resistant for a

longer life. Size: (L) 75 cm x (B) 60 cm x(H) 75 cm. All works shall be carried out

as per directed by engineer in charge.Minimum section of Rack for (i) vertical

50mm x 50mm (ii) Horizontal long side 50mm x 50mm (iii) Horizontal short side

50mm x 50mm (iv) Horizontal shelf 30mm x 25mm

323 Providing and Placing Reagent bottle Rack Size: (L) 90 cm x (B)25 cm x(H) 75 2.00 Nos. 3504.70

cm made of 25mm thick all proof plywood including Horizontal three shelf and

Vertical support & 9mm thick all proof plywood for back Side are complete with

necessary teakwood beading & Melamine polishing to all faces including all cost

of material, labours with all lead & lift as directed by engineer-in-charge as etc.

324 Providing & fixing conference Table of size and design as per detail drawing 24.00 Sqmt 6481.17

using 19 mm thick allproof plywood of BWR confirming to IS 710 of green or

century make, designs & grooves as directed by architectural drawings.

Lamination of 1.0 mm thick in single or double shade of green, broom or

equivalent make of plain or texture finish as directed on all visible face including

on teak wood batten patti and 0.80 mm white lamination on all non visible faces.

with all side decorative boarder upto 50mm thick for good appearance including

necessary fixtures, fasteners & cable passing arrangement of standard make also

including all labours as approved by engineer-in-charge etc. complete.

325 Providing and fixing in position teak wood Stage (dias) having a 28 mm thick 156.00 Sqmt 4537.93

solid top resting on 63 mm x 35 mm wooden batten rail frame grid distance at

90x75 cm. c/c as per drawing.Framing resting on 73 mm x73 mm solid wooden

pillar support at each and every grid junction and height as directed with fixing

grooving, bolting, nailing, grinding, finishing, painting with required all labour

and equipment as per detailed drawing as directed by engineer in charge with all

326 Providing and fixing green board 2.40 mt x 1.50 mt size with glassboard dull 20.00 Nos. 5025.76

finished green sheet with 100x25mm teak wood fram of 25mm thikness with

french polish etc. completed.

327 Providing and fixing White board 1.80 mt x 1.50 mt sheet including with Silver 2.00 Nos. 7261.90

Finish Aluminum Frame of Melamine & Light Board as approved by engineer-in-

charge etc. complete.

328 Three seated Visitor chair Gang Seater: Provinding & supplying of Gang seater 20.00 Nos. 7898.20

(three seater) made out totally of s.s pipe/ sheets as approved or directed by the

architect and approved by the Engineer in charge.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

329 Supplying and placing Island bench as per the drawing having L=10200mm, 6.00 Nos. 390415.50

W=1500mm, H=900mm each consisting of 24 Storage cabinets of L=600mm,

W=520mm, H=675mm with 2 shutters and 1 shelf with 24 drawer of H=150mm,

size=600x520mm with 6 Nos double sided Reagent rack of L=1200mm,

W=1200mm, H=730mm with one shelf also including 30x30mm sq. tube powder

coated Pedestal of height=75mm & godrej lock on drawer (for standing posture)

made from 18/19mm allproof ply of IS 710 including 1 mm thick lamination outer

& visible side and Remaining inside portion with 0.8mm white lamination. colour

of lamination are as per instruction of Engineer-in-charge. Bench top-18mm Black

Granite with 19mm allproof ply of IS 710 backing L=10200mm, W=1500mm with

Sink unit frame L=600 with two shutters, All hinges, fixtures & fastening are

made of S.S. good quality for shutters & drawers,20 nos Electrical sockets of

amps of North west make or equivalent & MCB switch (Single phase) with

wiring, 5 unit of PP sinks size 570x355mm with outlet coupling,10 nos 1 way

water tap Also consisting 12 nos Two way gas valve & Gas tubing and plumbing

work for water supply, drainage & gas connection. All works shall be carried out

as per specifications and as directed by engineer in charge.

330 Supplying and placing Wall bench as per the drawing having L=23100mm, 1.00 No. 425388.77

W=750mm, H=900mm each consisting of (i) 32 Storages cabinets of L=600mm,

W=520mm, H=675mm with 2 shutters and 1 shelf with 32 drawer of H=150mm,

size=600x520mm , (ii) 4 Storage cabinets of L=600mm, W=520mm, H=825mm

with 2 shutters and 1 shelf (iii) 1 corner Storage cabinet of L=900mm, H=825mm

with 1 shutter and 1 shelf with 30x30mm sq. tube powder coated Pedestal of

height=75mm & godrej lock on drawers (for standing posture) made from

18/19mm allproof ply of IS 710 including 1 mm thick lamination outer & visible

side and Remaining inside portion with 0.8mm white lamination. colour of

lamination are as per instruction of Engineer-in-charge.(i)Bench top-18mm Black

Granite with allproof 19mm ply of IS 710 backing L=12600mm, W=750mm

(ii)Bench top-18mm Black Granite with 19mm allproof ply of IS 710 backing

L=9600mm, W=750mm ,(iii)Bench top-18mm Black Granite with 19mm allproof

ply of IS 710 backing L=900mm, W=900mm .All hinges, fixtures & fastening are

made of S.S. good quality for shutters & drawers, 30 nos Electrical socket of

amps of North west make or equivalent & MCB switch (Single phase) with single

side Electrical duck as requirod with wiring, 5 unit of PP sinks size 570x355mm

with outlet coupling, Single sided electrical Duck, 5 nos. 1 way water tap Also

consisting Plumbing work for water supply, drainage & connection. All works

shall be carried out as per specifications and as directed by engineer in charge.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

331 Supplying and placing Wall bench as per the drawing having L=22500mm, 2.00 Nos. 396101.80

W=750mm, H=900mm each consisting of (i) 33 Storage cabinets of L=600mm,

W=520mm, H=675mm with 2 shutters and 1 shelf with 32 drawer of H=150mm,

size=600x520mm, (ii) 3 Storage cabinets of L=600mm, W=520mm, H=825mm

with 2 shutters and 1 shelf (iii) 1 corner Storage cabinet of L=900mm, H=825mm

with 1 shutter and 1 shelf with 30x30mm sq. tube powder coated Pedestal of

height=75mm & godrej lock on drawer (for standing posture) made from

18/19mm allproof ply of IS 710 including 1 mm thick lamination outer & visible

side and Remaining inside portion with 0.8mm white lamination. colour of

lamination are as per instruction of Engineer-in-charge.(i)Bench top-18mm Black

Granite with 19mm allproof ply of IS 710 backing L=12000mm, W=750mm

(ii)Bench top-18mm Black Granite with 19mm allproof ply of IS 710 backing

L=9600mm, W=750mm ,(iii)Bench top-18mm Black Granite with 19mm allproof

ply of IS 710 backing L=900mm, W=900mm .All hinges, fixtures & fastening are

made of S.S. good quality for shutters & drawers, 30 nos Electrical socket of

amps of North west make or equivalent & MCB switch (Single phase) with single

side Electrical duck as requined length with wiring, 3 unit of PP sinks size

570x355mm with outlet coupling, 3 nos, 1 way water tap Also consisting

Plumbing work for water supply, drainage & connection. All works shall be

carried out as per specifications and as directed by engineer in charge.

332 Supplying and placing Island bench as per the drawing having L=4200mm, 2.00 Nos. 185187.54

W=1500mm, H=900mm each consisting of 10 Storage cabinets of L=600mm,

W=520mm, H=675mm with 2 shutters and 1 shelf with 10 drawers of H=150mm,

size=600x520mm with 2 Nos double sided Reagent rack of W=250mm,

H=730mm with one shelf also including 30x30mm sq. tube powder coated

Pedestal of height=75mm & godrej lock on drawer (for standing posture) made

from 18/19mm allproof ply of IS 710 including 1 mm thick lamination outer &

visible side and Remaining inside portion with 0.8mm white lamination. colour of

lamination are as per instruction of Engineer-in-charge. Bench top-18mm Black

Granite with 19mm allproof ply of IS 710 backing L=4200mm, W=1500mm with

Sinks unit frame L=600 with shutter. All hinges, fixtures & fastening are made of

S.S. good quality for shutters & drawers, 12 nos Electrical socket of 20 amps of

North west make or equivalent & MCB switch (Single phase) with wiring, 2 unit

of PP sinks size 570x355mm with outlet coupling, 2 nos 1 way water tap Also

consisting 4 nos Two way gas valve & Gas tubing and plumbing work for water

supply, drainage & gas connection. All works shall be carried out as per

specifications and as directed by engineer in charge.

333 Supplying and placing Fume hood (with base) as per the drawing having 3.00 Nos. 197362.08

L=1500mm, D=900mm, H=2250mm made of Extra heavy structure 14 Gauge

frame & 20 Gauge CRCA body consisting of Fume hood Upper unit constant

Exhaust type Epoxy Polyester Powder Coated (overall size L=1800mm,

D=900mm, H=1350mm) with other facilities consisting of :- 1 no of Fume hood

(Upper unit) internal size:- L=1500mm, D=900mm, 1000mm 1 no of Baffle at the

back wall, FRP liner for acid application consist 1 no of Sash-vertical sliding 5mm

thick polycarbonate sheet, 2 nos 6/16 amps single phase 'North west' or

equivalent socket with 16 amps MCB, Respective internal wiring terminated at

fume hood top at rear end for further connection, NO-NC switch for blower

starter, Light fixutres- tube light, Tube light switch with wiring. Black Granite

18mm dished work surface with 12mm thick allproof ply IS 710 backing

provision to fix Drip cup. Utility Services - Remote valves on front fascia and

spout on the inside wall. (All utility line shall be terminated at rear side on

top/bottom of fume hood for further connection) also having 3 no of Panel

mounting Valves for Gas, 2 no of Panel mounting Valves for Water, 1 no of Fume

Hood base with L=1500mm, H=900mm. All works shall be carried out as per

specifications and as directed by engineer in charge.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

334 Supply. installation, testing &commissioning of ISI approved electrical motor 5.00 Nos. 98424.50

driven jockey pump set having 10.8 m3/hr. @ 70m head.The pump unit shall be a

horizontally direct mounted motor. Unit shall comprise the following minimum

requirements: a)Pump, b) Electric motor IE2, c) Foundation bolts, d) Mating

flanges with gasket and fasteners, e) Discharge gauges, etc.complete in all respect,

335 Supply, installation, testing &commissioning of Priming tank, HDPE type, 1000 4.00 Nos. 25674.20

litres, with necessary piping 100 mm size, G.I pipe for priming the pumps, pipe of

with butterfly valves for isolation, Water Filling to priming tank by piping min.

mm size, with all complete.

336 Supply, installation, testing &commissioning of Manifold (surge vessel) for fire 4.00 Nos. 55630.80

hydrant system, min.300 mm diameter,made from M.S plate,hydro tested to

kg./cm2. with ball valves,header with couplings for fitting pressure

switches,pressure gauges etc.with necessary isolation valves with all complete.

337 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW 120.00 Mtr 393.90

piping,conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589,

for size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-

II, Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 25 mm dia.

338 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 170.00 Mtr 636.30

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 50 mm dia.

339 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 175.00 Mtr 1171.60

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 80 mm dia.

340 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 525.00 Mtr 1686.70

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 100 mm dia.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

341 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 195.00 Mtr 2525.00

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the

Engineer-in-Charge, with all complete. 150 mm dia.

342 Supply, fabrication & erection of aboveground G.I. 'C'-Class, ERW piping, 100.00 Mtr 3413.80

conforming to IS:1239, part-I, Heavy class up to 150 mm dia. and IS:3589, for

size 200 mm dia. & above, thickness. G.I. pipe fitting's as per IS: 1239, part-II,

Heavy class for size 150 mm dia. & below & IS: 3589, for size 200 mm dia.

above, flanges, nuts bolts & washers, 3 mm thick gasket, pipe hangers,

etc.Hydrostatic testing for 2 hour's at 150% of the system pressure, hook-up etc.

Painting for piping, fittings & structural pipe support, shall be two coat of zinc

primer and two coats of fire red conf. to IS: 5, Shade 536. Complete with all

accessories as per approved drawings, specicification and direction of the

Engineer-in-Charge with all complete.200 mm dia.

343 Supply, installtion, testing & commissioing of Underground GI (ERW) piping 100.00 Mtr 2020.00

conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm dia. and

IS:3589 Heavy class ('C' class), for 200 mm dia. & above, min. 6.35mm thickness

including Heavy class fittings, anti-corrosive tape of size 150 mm wide x 4 mm

thick, wrapping & coating with 13KV holiday testing . Rates shall include sand

bedding of 75mm dia all around, backfilling of the excavated including

installation of heavy pipe fitting's, flanges, etc. 10 % of all the welded joints shall

be done radiographically tested and 50% of the joints radiographed shall be the

"Field Joints". Hydrostatic testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per approved drawings,

specicification and direction of the Engineer-in-Charge, with all complete. (Road

Crossing) 100 mm dia.

344 Supply, installtion, testing & commissioing of Underground GI (ERW) piping 100.00 Mtr 3040.10

conforming to IS:1239, part-I, Heavy class ('C' class) up to 150 mm dia. and

IS:3589 Heavy class ('C' class), for 200 mm dia. & above, min. 6.35mm thickness

including Heavy class fittings, anti-corrosive tape of size 150 mm wide x 4 mm

thick, wrapping & coating with 13KV holiday testing . Rates shall include sand

bedding of 75mm dia all around, backfilling of the excavated including

installation of heavy pipe fitting's, flanges, etc. 10 % of all the welded joints shall

be done radiographically tested and 50% of the joints radiographed shall be the

"Field Joints". Hydrostatic testing for 2 hours at 150% of the system pressure,

hook-up etc., complete with all accessories as per approved drawings,

specicification and direction of the Engineer-in-Charge, with all complete. (Road

Crossing) 150 mm dia.

345 Design , Supply and installation of Safety Signage made of Zinc Sulphilde based 16500.00 Sq. inch 9.09

glow in dark , Rigid sheet with High Luminous property enclosed in a transperent

weather proof UV stabilized plastic pasted on 3 mm thick clear acrylic sheet such

as EXITS, EMERGENCY EXIT, DO NOT USE LIFT DURING FIRE, FLOOR

MARKINGS, FIRE LIFT, STAIRCASE EXIT, FIRE ALARM CALL POINT,

FIRE HOSE REEL, FIRE HYDRANT POINT etc.

346 Supply, Installtion, Testing & Commissioing of Standard Response Sprinkler, 75.00 Nos. 555.50

Pendent Brass Sprinkler, Quartzoid Bulb type with crome finish, nickel crome

platde, K factor K-80, Temp.- 680C, 1/2" end connection including resessed

escutcheon. (UL Listed).

347 Supply, installation, testing & commissioning of pressure switch. (Range 0 to 16 7.00 Nos. 2817.90

348 Supply, installation, testing & commissioning of 150 mm dia. dial Burdon Type 13.00 Nos. 2737.10

Glycerine Filled pressure gauge with isolation ball valve arrangements with

necessary isolation valves with all complete. (Range 0 to 15 kg/cm2)

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

349 Supply, installation, testing & commissioning of Cast iron body double flanged 4.00 Nos. 5898.40

gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with mating flanges,

drilling as per IS/ANSI 150# with mating flanges, galvanized nut, bolts &

washers, gasket 3 mm thick, etc., with all complete. 50 mm dia.

350 Supply, installation, testing & commissioning of Cast iron body double flanged 4.00 Nos. 8181.00

gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with mating flanges,

drilling as per IS/ANSI 150# with mating flanges, galvanized nut, bolts &

washers, gasket 3 mm thick, etc., with all complete. 80 mm dia.

351 Supply, installation, testing & commissioning of Cast iron body double flanged 4.00 Nos. 10261.60

gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with mating flanges,

drilling as per IS/ANSI 150# with mating flanges, galvanized nut, bolts &

washers, gasket 3 mm thick, etc., with all complete 100 mm dia.

352 Supply, installation, testing & commissioning of Cast iron body double flanged 4.00 Nos. 15917.60

gate valve With Rising Spinldle conf. to IS: 14846, PN-1.6 with mating flanges,

drilling as per IS/ANSI 150# with mating flanges, galvanized nut, bolts &

washers, gasket 3 mm thick, etc., with all complete 150 mm dia.

353 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 10.00 Nos. 2009.90

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated complete with mating flanges

/ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc.,

with all complete. 50 mm dia.

354 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 5.00 Nos. 2565.40

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated complete with mating flanges

/ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc.,

with all complete. 80 mm dia.

355 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 10.00 Nos. 3120.90

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated complete with mating flanges

/ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc.,

with all complete. 100 mm dia.

356 Supply, Installation, Testing & Commissioning of Cast iron body Butterfly valve 5.00 Nos. 4484.40

according to IS: 13095, PN-1.6, Iron Disc for size 150 mm dia. & below Lever

operated and above 150 mm dia. Gear operated complete with mating flanges

/ANSI class # 150 with bolts & nuts washers, rubber gaskets 3 mm thick, etc.,

with all complete. 150 mm dia.

357 Supply, installation, testing & commissioning of Cast iron body Dual Plate Wafer 4.00 Nos. 1535.20

Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete

Accessories 50 mm dia.

358 Supply, installation, testing & commissioning of Cast iron body Dual Plate Wafer 4.00 Nos. 2222.00

Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete

Accessories 80 mm dia.

359 Supply, installation, testing & commissioning of Cast iron body Dual Plate Wafer 4.00 Nos. 3161.30

Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete

Accessories 100 mm dia.

360 Supply, installation, testing & commissioning of Cast iron body Dual Plate Wafer 2.00 Nos. 5817.60

Type NRV conf. to IS: 210, PN-1.6 complete with mating Flanges class #

with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete

Accessories 150 mm dia.

361 Supply, installation, testing & commissioning of SG iron body SinglePlate Wafer 2.00 Nos. 1111.00

Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges class #

150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete.

Accessories 50 mm dia.

362 Supply, installation, testing & commissioning of SG iron body SinglePlate Wafer 4.00 Nos. 1454.40

Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges class #

150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete.

Accessories 80 mm dia.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

363 Supply, installation, testing & commissioning of SG iron body SinglePlate Wafer 4.00 Nos. 1787.70

Type NRV conf. to ASTMA 536, PN-1.6 complete with mating Flanges class #

150 with bolts & nuts, washers, gaskets 3 mm thick, etc., with all complete.

Accessories 100 mm dia.

364 Supply, installation, testing & commissioning of Y Type Strainer complete with 4.00 Nos. 5555.00

mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete accessories. 80 mm dia.

365 Supply, installation, testing & commissioning of Y Type Strainer complete with 4.00 Nos. 7272.00

mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete accessories. 100 mm dia.

366 Supply, installation, testing & commissioning of Y Type Strainer complete with 4.00 Nos. 11554.40

mating flanges with bolts & nuts, washers, gaskets 3 mm thick, etc., with all

complete accessories. 150 mm dia.

367 Supply, installing, testing and commissioning of Normax make CI heavy duty ball 1.00 No. 4191.50

type foot valve with flanges, nut bolts, gaskets etc. with necessary complete

accessories. 80 mm dia.

368 Supply, installing, testing and commissioning of Normax make CI heavy duty ball 4.00 Nos. 6161.00

type foot valve with flanges, nut bolts, gaskets etc. with necessary complete

accessories. 100 mm dia.

369 Supply, installing, testing and commissioning of Normax make CI heavy duty ball 1.00 No. 12402.80

type foot valve with flanges, nut bolts, gaskets etc. with necessary complete

accessories. 150 mm dia.

370 Supply, installation, testing & commissioning of Four way fire brigade Inlet 1.00 No. 8978.90

connection with 63 mm dia. stainless steel (SS304) instantaneous male inlets with

built in non return valve in each inlet with 150 mm dia. header pipe, suitable

rubber cap and GI chain including nuts, bolts, washers, gasket 3 mm thick, etc.

with all complete.

371 Supply, installation, testing & commissioning of Two way fire brigade Inlet 4.00 Nos. 5130.80

connection with 63 mm dia. stainless steel (SS304) instantaneous male inlets with

built in non return valve in each inlet with 100 mm dia. header pipe, suitable

rubber cap and GI chain including nuts, bolts, washers, gasket 3 mm thick, etc.

with all complete.

372 Supplying FIRE bucket round bottom of 9 liters capacity made out of 24 gauge 20.00 Nos. 1020.10

G.I Sheet with extra handle at bottom duly painted white inside and Red out side

with FIRE mark. Filled with dry-sand and kept on existing stand provided or hung

373 Supplying and erecting floor mounting Stand for keeping four nos. of FIRE 5.00 Nos. 5555.00

buckets comprising 1500 mm in length, 900 mm height frame made out of 30mm

x 30 mm x 4 mm angle iron with cross supports legs, welded with 4 hooks and

duly painted with one coat of primer and two coats of approved enamel P O red

374 Supply & installation of stainless steel body Orifice Plate of suitable inner bore 30.00 Nos. 1060.50

along with matching flange - as per specification & requirement as per hydraulic

375 Providing and fixing approved make Perforated C type cable tray. Made from pre- 50.00 Mtr 464.60

galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 .

with max 17.5% perforation with coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erected on existing support as per Specification and as

per instruction of engineer in charge..(5) 300 X 50 X 1.5 mm Thick

376 Providing and fixing approved make Perforated C type cable tray. Made from pre- 50.00 Mtr 313.10

galvanized sheet steel. The cable tray should be bended as per IS 2062/1079 .

with max 17.5% perforation with coupler plate / Fish plate and GI hardware like

nut - bolt and washers etc. erected on existing support as per Specification and as

per instruction of engineer in charge..(3) 150 X 50 X 1.5 mm Thick

377 Supply, installation, testing & commissioning of Oblique pattern type stainless 30.00 Nos. 5433.80

steel (SS 304) single headed External Fire Hydrant Valve with 63 mm dia. female

instantaneous outlet conf. to IS: 5290, type - A, including mating flanges,

galvanised nuts, galvanised bolts/studs, washers & gaskets 3 mm thick with all

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

378 Supply, installation, testing & commissioning of 63 mm dia. stainless steel (SS 30.00 Nos. 1747.30

304) Universal Branch Pipe conf. to IS:

379 Supply & installation, testing & commissioing of Fire Fighting Hose - conf. to IS : 30.00 Nos. 6958.90

636, type B (type- 3), The fire hose shall be 15 m long with 63 mm dia. stainless

steel (SS 304) couplings conf. to IS: 903, at both the ends for connection with the

hydrant valve and the branch pipe.

380 Supply, installation, testing & commissioning of fabricated from 3 mm MS sheet, 30.00 Nos. 2525.00

hose box of size-450 mm x 600 mm x 250 mm - painted with Fire Red as per IS:

5, shade no. 536 front 3 mm thick transparent glass with lock & key, handle and

brass hinges - to accommodate one number of 15 mtr long hose and one number

of universal branch pipe, including supporting arrangement with civil work.

381 Supply, Installation, testing & commissioing of Swinging type mild steel hose reel 30.00 Nos. 7403.30

drum with 20 mm dia. x 30 mtr. rubber hose as per IS: 884. The mounting stand

shall be of mild steel and the hose shall be fitted with a SS shut-off nozzle & SS

ball valve of 25 mm dia. including supporting arrangement with all complete.

382 Supplying, fixing & testing of of CI ball Valve 25mm dia. (Thread) 50.00 Nos. 696.90

383 Supplying, fixing & testing of New Battery of diesel engine 150 Amp. 1.00 No. 15826.70

384 Supply and installation of Diesel Tank For Diesel Engine With All Accessories 1.00 No. 16685.20

385 Supplying, filling & testing lube oil for diesel engine 15.00 Ltr 313.10

386 Supply and commissioning of Oil Filter. 1.00 No. 696.90

387 Supplying, filling of diesel in diesel engine tank 100.00 Ltr 89.87

388 Supply and commissioning of Diesel Filter 1.00 No. 427.97

389 Supplying, filling & testing coolant to engine cooling for radiator 20.00 Ltr 239.66

390 Filling Of Gaps Between pipe and Core Cutting Hole With Chemical and Cement 80.00 Nos. 299.58

391 Supplying & erecting XLPE(IS:7098)(I)-88 ISI unarmoured copper cable 1.1 KV 300.00 Mtr 136.35

grade to be erected as directed of following size. (E) 3 core 2.5 Sq. mm for

pressure switch

392 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 250.00 Mtr 285.83

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (B) 3 core 4 Sq. mm

393 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 50.00 Mtr 497.93

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cable. (Only

Fire Panel to Fire Pump) (D) 3 core 10 Sq. mm (Only Fire Panel to Fire Pump)

394 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 30.00 Mtr 213.11

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe at road crossing or floor of following size of cable for

Diesel Engine Battery Charger (A) 3 core 2.5Sq. mm

395 Supply, Filling and Fixing of approved make ABC type fire extinguisher - 6 Kg. 60.00 Nos. 1959.40

Capacity as per IS:15683 & IS :

396 Supply, Filling and Fixing of approved make CO2 type fire extinguisher. 60.00 Nos. 5514.60

Capacity 4.5 Kg. (conforming to IS-15683).

397 Supply, Filling and Fixing of approved make ABC Moduler type automatic fire 10.00 Nos. 3413.80

extinguisher. Capacity 5 Kg. (conforming to IS-15683).

398 Submitting the application to obtain Fire Plan Approval and After Completion of 4.00 Nos. 101000.00

Work Obtain Final Fire NOC for 3 Year.

399 Supply, Installation and commissioning of Air Release Valve, 25 mm Dia. 5.00 Nos. 1403.90

400 Supply, Installation and commissioning of Fire Alarm Panel Conventional type, 4 5.00 Nos. 21391.80

zone, with complete accessories.

401 Supply, Installation and commissioning of smoke detectors / heat detectors, with 20.00 Nos. 1020.10

complete accessories.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

402 Supply, Installation and commissioning of plug in base for the smoke detectors, 20.00 Nos. 252.50

hooters, with complete accessories.

403 Supply, Installation and commissioning of Audio hooters , with complete 30.00 Nos. 1060.50

404 Supply, Installation and commissioning of Manual Call Points, with complete 30.00 Nos. 1010.00

405 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 900.00 Mtr 176.75

Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (A) 2 core 2.5 Sq. mm for Fire

406 Core cutting in wall and in RCC slab with size as below: 50 mm dia. Hole 30.00 Nos. 333.30

407 Core cutting in wall and in RCC slab with size as below: 80 mm dia. Hole 15.00 Nos. 424.20

408 Core cutting in wall and in RCC slab with size as below: 100 mm dia. Hole 15.00 Nos. 505.00

409 Core cutting in wall and in RCC slab with size as below: 150 mm dia. Hole 10.00 Nos. 595.90

410 Core cutting in wall and in RCC slab with size as below: 200 mm dia. 10.00 Nos. 848.40

411 Supply, installation, testing & commissioning of ISI approved electrical motor 1.00 Set 204989.60

operated Kirloskar make fire hydrant main pump set horizontal end suction back

pull out top discharge centrifugal fire pump set with all the standard acessories,

base frame, coupling, and foundation bolts with following specifications Model -

DB 80/26, Flow-137 m3/hr,Head-70 meter,Motor Rating -45KW/60HP/3 ph,

Suc x Del - 100 x

412 Supplying, Installation, Testing and commissioning of Kirloskar make diesel 1.00 Set 447652.20

engine driven fire hydrant pump set suitable for automatic operation and

consisting of following: horizontal type, centrifugal end suction back pull out, top

discharge pump of cast iron body & bronze impeller with m.s.fabricated common

base plate, coupling, coupling guard, foundation bolts etc.,as required. Model -

KFE Flow-137 m3/hr,Head-70 meter, Engine - 62 HP / 3 ph Suc x Del - 125 x

413 Fire Hydrant Panel suitable for 10 hp Jockey pump, 60 hp (137 m3/hr @ 70 m 1.00 No. 101000.00

head) main electrical pump and 62 hp (137 m3/hr @ 70 m head) Diesel engine

operated pump A) Incomer MCCB - 1 Nos R Y B Indication - 1 Set VAF Digital

Meter - 1 Set B) Outgoing F1 60 HP Star Delta Starter - 1 For Main pump F2

10 HP DOL Starter - 1 For Jockey Pump F3 Auto - On / Off Diesel Pump With

Battery Charger Control Circuit With Auto - Manual On/Off On/Off Trip

Indication On/Off Push Button C) Fabrication Dully Powder Coated PO Red

Colour,Fabricated From 14/16 SWG,GI Sheet , IP-42 Protection,-Fixed Type

Floor Mounted Cable Entry : Bottom

414 Fire Control Panel suitable for automatic operation for 10 Hp Jockey Pump. 4.00 Nos. 20200.00

415 Pay Legal Fees to Concern Authority for Obtaining Plan Approval and Final 12000.00 Sqmt 10.10

416 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 1415.00 Pt. 582.77

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length , in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of following type, erected on

PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

417 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm 94.00 Pt. 291.39

(Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand

copper wires up to 10 mtr length , in below type of pipe erected with 6A Modular

type switch / bell push & accessories and earth continuity of following type,

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured/metallic/white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected concealed

in wall/ceiling complete Cat. III W/C Point.

418 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 459.00 Pt. 809.01

are of .ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic/Wooden box,

single mounting base frame covered with textured/metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling

rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete.Cat. III.

419 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 17.00 Pt. 612.06

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected with following

type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire

from nearby switchboard/mcb db board (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete Cat. III.

420 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 144.00 Pt. 1046.36

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected with following

type of accessories.[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu.

Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board..(f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

421 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 484.00 Pt. 309.06

socket erected on PVC / Metallic/Wooden box, single mounting base frame

covered with textured / metallic/white front plate modules erected on / in wall /

ceiling with following type accessories Cat. III.

422 Point wiring for Two Way Controlled Light Point with 2-1.5 sq.mm & earth wire 36.00 Pt. 725.18

of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated

multi strand copper wires erected in below type of pipe with 6A Modular type

switches and following type of accessories erected on PVC / Metallic/Wooden

box, single mounting base frame covered with textured / metallic/white front plate

modules erected on / in wall / ceiling as per pipe erected. with necessary

batten/angle holder or ceiling rose or H.D.Connector as directed. (f) with medium

class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete

423 Providing following type of Modular Type Accessories mounted with PVC / 711.00 Ea. 151.50

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (1) One No. SP 6 Amp. Cat.III.

424 Providing following type of Modular Type Accessories mounted with PVC / 711.00 Ea. 151.50

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per site

situation directed by Engineer In charge (2) One No 5 pin plug Cat.III.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

425 Providing following type of Modular Type Accessories mounted with PVC / 21.00 Ea. 160.59

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (4) TV Co-axial Socket outlet Cat.III.

426 Providing following type of Modular Type Accessories mounted with PVC / 547.00 Ea. 25.25

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate, modules erected with necessary connections as per site

situation directed by Engineer In charge. (7) Blank Plate Single Cat.III.

427 Providing following type of Modular Type Accessories mounted with PVC / 45.00 Ea. 160.59

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge.(8) Computer RJ-45 socket Cat.III.

428 Providing following type of Modular Type Accessories mounted with PVC / 24.00 Ea. 180.79

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (9) 16 Amp. SP one way switch Cat.III.

429 Providing following type of Modular Type Accessories mounted with PVC / 137.00 Ea. 199.98

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (10) 6/16Amp. Universal socket Cat.III.

430 Providing following type of Modular Type Accessories mounted with PVC / 114.00 Ea. 410.06

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge. (14) 6A/ 10A/ 16A/ 20A/ 25A/ 32A

Double Pole Modular MCB Switch.

431 Providing and erecting ISI mark Medium class RIGID PVC PIPES of following 4826.00 Mtr. 24.24

size complete to be erected on/in wall or ceiling erected with necessary PVC

fittings & Junction boxes fixed with adhesive solution & Clamps with following

dia of pipes, in approved manner as directed (a)20 mm.

432 Supplying and laying UPVC cable trunking system comprising unplasticised 120.00 Mtr. 277.75

polyvinyl, chloride rigid material with ignition free and flame proof confirming

BS with necessary end caps Internal and external bend, flat bends, coupler, tee

etc..All necessary accessories and measuring of following sizes (1) 75 mm x

433 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 19290.00 Mtr. 104.03

stranded Copper conductor wire in following type of pipe to be erected concealed

in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC

insulated stranded wire of green colour for earth continuity of following size (A)

With medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm.

434 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 2466.00 Mtr. 140.39

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm.

435 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 3025.00 Mtr. 184.83

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories (b) 2 wire 6 sq. mm.

436 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 1320.00 Mtr. 326.23

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size (A) with medium class

Rigid PVC pipe and accessories (h) 4 wire 6 sq. mm.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

437 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 656.00 Mtr. 70.70

stranded, annealed copper conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required. (e) One wire 6.00 sq. mm.

438 Providing and erecting Mains with ISI marked, 1.5KV grade electrolyte multi 120.00 Mtr. 295.93

stranded, annealed copper conductor with heat resistant PVC insulated conforms

to IS 694, IEC - 227 erected in existing pipe of following size (Specifically for

control panel, relays, power switchgears, motor starters & control wiring) with

required size of copper lugs, nuts and bolts if required. (h) One wire 25.00 sq.

439 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv 3850.00 Mtr. 28.28

grade ISI marked copper wires of following size to be erected as directed. (c)

Sq.mm 2 core round/ flat PVC sheathed.

440 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv 344.00 Mtr. 58.58

grade ISI marked copper wires of following size to be erected as directed. (e)

Sq.mm 3 core round PVC sheathed.

441 Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv 100.00 Mtr. 221.19

grade ISI marked copper wires of following size to be erected as directed.(k)

4.00Sq.mm 4 core round PVC sheathed.

442 Providing & Erecting approved make following size of TV Co-axial flexible cable 735.00 Mtr. 39.39

comprising inner conductor of solid bare copper insulated with Foam PE &

Secondary conductor made of poly - Aluminium film bonded Al. Braids @

suitable coverage overall sheathed with black PVC insulation. (b) RG-6.

443 Supplying & erecting approved make LAN cable of following size in existing pipe 1800.00 Mtr. 47.47

as per direction [C] CAT -

444 Providing & erecting Switch board for Computer or electric apparatus consisting 91.00 Ea. 1133.22

of following modular type accessories mounted with PVC / Metallic

concealed/open box with single mounting base frame covered with

textured/metallic /white front plate,modules erected with necessary connections as

directed 1 no. 6A/16A universal plug-switch combined.

3 nos. 6A Switch 3 nos. 6A 5 pin Plug For Modular Type Accessories Cat. III.

445 Decorative call bell Ting-tong box type 250 volts complete erected. 23.00 Ea. 71.71

446 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 64.00 Ea. 373.70

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 % (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Tube Light with integral driver (iv) 22-24 Watts, Surge -

2KV,IP-20, conventional 4 feet Cat-lll.

447 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 894.00 Ea. 535.30

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 % (fitting required LM-79 & LM-80

Certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.)(A) Tube Light with integral driver (v) 36-40 Watts, Surge-2 KV,

IP-20, conventional 4 feet Cat-lll.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

448 Supplying and erecting led lamps with following wattage capacity of 220 to 240 429.00 Ea. 112.11

voltage, minimum 15000 burning hours life, 500 V in built-surge

protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp

holders, pf >= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP

holder (ii) 5 to 8 watts Cat-III.

449 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 5.00 Ea. 1794.77

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed

in aluminium casted body with company mark/name

160V to 270V,Power Factor more than 0.95, THD < 15 %,

CCT 3000 K to 6500K, Luminaire efficacy> 85 lumens/watt, LED driver

efficiency > 85 % (fitting required LM-79 & LM-80 Certificates)(NOTE: Below

description have shown ranges of Wattage capacity of LED fittings. The Engineer

incharge may select any wattage capacity between the ranges shown.) (B) LED

Panel Light with provision for Plane front frame with translucent cover fixed to

housing complete.IP20 (vi) 36 watts, 24" x 24", Surge- 2KV Cat-lll.

450 Supplying and erecting LED street light / Flood light fittings with High power 8.00 Ea. 4248.06

White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %. (fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection. (ii) 48 -

451 Supplying and erecting LED street light / Flood light fittings with High power 25.00 Ea. 5080.30

White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (A) Street Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection. (iii) 60 -

452 Supplying and erecting LED street light / Flood light fittings with High power 24.00 Ea. 8201.20

White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection. (vi) 160 -

199 watts Cat-lll.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

453 Supplying and erecting LED street light / Flood light fittings with High power 20.00 Ea. 9196.05

White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %. (fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (B) Flood Light (IP-65), Surge protection -4KV integral and

,Light must have 440VAC line supply with over-voltage protection. (vii) above

200 to 250 watts Cat-lll.

454 Supplying and erecting LED street light / Flood light fittings with High power 37.00 Ea. 4096.56

White LEDs wattage of 3 Watt and above assembled on single MCPCB, efficiency

more than 130 lm/w and corrosion free High pressure die cast aluminum housing

with smooth finish powder coated and heat sink extruded aluminium with diffuser

and Polycarbonate optics/ lenses, with toughened glass with company mark/name

engraved or embossed 160 to 270 V,Power Factor more than 0.95, THD < 10 %,

CCT 3000 K to 5700K,Uniformity ratio >0.45, Luminaire efficacy>

lumens/watt . LED driver efficiency > 85 %.( fittings required LM-79 & LM-80

certificates)(NOTE: Below description have shown ranges of Wattage capacity of

LED fittings.The Engineer incharge may select any wattage capacity between the

ranges shown.) (C) Post Top Lantern LED fitting comprises of finish cast

aluminum spigot and spun aluminum canopy fixed with opal polycarbonate, pipe

arrangement for vertical mounting driver and accessories wired upto terminal

block.IP 65 (ii)32-40W Cat-lll.

455 Pproviding and erecting Approved make Four pole moulded case circuit breaker 9.00 Ea. 6790.23

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.ICS=100% of ICU only Cat III.

456 Providing and erecting Approved make Four pole moulded case circuit breaker 15.00 Ea. 8861.74

having breaking capacity ICU of 35 KA. at 415 V. having normal current rating

125A. with Fixed thermal & magnetic release suitable to work on A.C.supply

c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S. housing. ICS=100% of ICU only Cat III.

457 Providing and erecting Approved make Four pole moulded case circuit breaker 3.00 Ea. 17843.67

having breaking capacity ICU of 35 KA. at 415 V. having Normal current rating

200A.with variable Thermal & magnetic release suitable to work on A.C.supply

50 c/s. with all internal connections, spreader tinned copper & complete erected in

existing 16 G.M.S.housing ICS=100% of ICU only Cat III.

458 Providing and erecting Approved make Four pole moulded case circuit breaker 8.00 Ea. 23041.13

having breaking capacity ICU of 35 KA. and above at 415 V . having normal

current rating 250A. with variable thermal & magnetic release suitable to work on

A.C.supply 50 c/s. with all internal connections, spreader tinned copper &

complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III.

459 Supplying & erecting approved make Four Pole 415V change over switch interior 1.00 Ea. 4785.38

for panel mounting with operating mechanism A.C.23 duty confirming to IS for

(B)63 A Cat-lll.

460 Supplying & erecting approved make Four Pole 415V change over switch interior 2.00 Ea. 7790.13

for panel mounting with operating mechanism A.C.23 duty confirming to IS for

(C)100-125A Cat-lll.

461 Supplying & erecting approved make Four Pole 415V change over switch interior 3.00 Ea. 13353.21

for panel mounting with operating mechanism A.C.23 duty confirming to IS for

(E)250A / 320A Cat-lll.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

462 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 3.60 Rn.Mtr 1961.42

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections. (A) Suitable for

463 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 8.40 Rn.Mtr 3202.71

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections. (B) Suitable for

464 Supplying and erecting triple pole & neutral 440V / 500V panel mounting Copper 5.80 Rn.Mtr 4909.61

Busbars with four equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly wrapped with

colour insulating tape for phase sequence of following current carrying capacity,

erected with necessary bus bar supports /insulators, main cable socket to each bar,

erected in existing cubical panel with necessary connections. (C) Suitable for

465 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 778.00 Ea. 123.22

operate on 240 V A.C. system and having breaking capacity 10 KA to be erected

in existing box. confirming to IS 8828/1996 with ISI Mark Cat.III.

466 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) 3.00 Ea. 306.03

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

following capacity (A) 6 to 32 Amp. Cat.III.

467 Providing & erecting 240 V MCB double pole switch for lighting Load (B Curve) 146.00 Ea. 325.22

having 10 KA breaking capacity & confirms to IS : 8828 in existing box having

following capacity (B) 40 Amp. Cat.III.

468 Providing & erecting 415V MCB Four Pole Switch for Lighting Load (B curve) 86.00 Ea. 702.96

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity (b)40 Amp. Cat.III.

469 Sheets steel powder coated enclosure suitable for incorporating One/Two nos. 43.00 Ea. 176.75

470 Providing and erecting Sheet Steel powder coated MCB distribution board - flush 3.00 Ea. 1152.41

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iii)8 way.

471 Providing and erecting Sheet Steel powder coated MCB distribution board - flush 52.00 Ea. 1492.78

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (A) single phase incoming and horizontal single phase outgoing (b)

sheet steel double door (IP-43) (iv)12 way.

472 Providing and erecting Sheet Steel powder coated MCB distribution board - flush 24.00 Ea. 2339.16

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs.(The DBs should be used of same company of MCB to be used)

suitable for (B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI) (b) sheet steel double door (i)4 way.

473 Providing and erecting Approved make RCCBs conforming to IS: 12640 and 21.00 Ea. 2166.45

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (i) 25 Amps.DP Cat.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

474 Providing and erecting Approved make RCCBs conforming to IS: 12640 and 126.00 Ea. 2458.34

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic

component. for following Max. rating erected as directed (ii) 40Amps. DP Cat.

475 Providing and erecting Annealed bare Copper wire 4.064mm to 1.626mm. 84.00 Kgs. 794.87

476 Providing and erecting HOT deep Galvanised iron strip/wire 4.064mm to 136.00 Kgs. 77.77

477 Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. 34.00 Ea. 368.65

galvanised iron pipe with coupling and buch buried in specially prepared earth pit

complete with necessary 8 SWG earth wire.

478 For using salt and charcoal / coke as required for pipe type earthing. 34.00 Ea. 171.70

479 Supplying & erecting earth pit of minimum bore dia.150mm size approved make 22.00 Ea. 4591.46

Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987 made

of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron

galvanising, connection terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with high charge dissipation suitable

for following type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer Incharge

has to ensure the value of earthing resistane mentioned in test Certificate) &

having back filling compound of (B) Inner chemical (CCM Compound)-

Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017, Voltage drop:- <

volt at no load & dry form, Sulphar content:- <2%(C) Back fill Compound :-

Earthing compound should be capable to retain moisture for long time Necessary

test report must be submitted by Agency. (a) For Electrical Installation up to 440V

in normal soil Length of pipe - 1 Mtr Back filling compound - 1 Nos Bag of

480 Providing & erecting weather proof, dust & vermin proof, floor mounted front 22.93 Sq.Mtr 10468.65

operated indoor type cubical panel board necessary IP-42 and above protection

as per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet

for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with

necessary accesories , supporting angles/ flats channel including cutting,

bending, drilling, welding, riveting with internal partitions & cable alley as per

requirements & instruction of engineer-in-charge with erection of supplied switch

gears, BUSBARS, suitable size of inter connecting PVC copper wire / copper-

aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-base Plates,

sufficient nos. of hinged doors, handles with locking arrangement and rubber

gasket,heavy duty end terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted with epoxy powder

coating. (The rates excludes the cost of switchgears, bus bars, inter connecting

mains & Copper Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied with following

approved manufacturers with following size. (A) locally fabricated panel board (i)

with 350mm depth.

481 Providing, erecting, fabricating the M.S. structure as per requirement on site 475.00 Kg. 77.77

incorporating proper size of M.S. angles,square,round, flats, bars, channels,

sections complete with cutting, welding, grinding & finishing duly painted with

one coat of red oxide with erection on site as per direction of engineer in charge

with necessary grouting, cementing, plastering & finishing complete.

482 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable Aluminium 90.00 Mtr. 112.11

conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing

trench / pipe of following size of cables. (B) 2 core 6 Sq. mm.

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

483 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand 35.00 Mtr. 229.27

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (B) 4 core 25 Sq. mm

484 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 170.00 Mtr. 341.38

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (C) 3 1/2 core 50 Sq. mm (

Sq.1/2 mm core)

485 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 146.00 Mtr. 454.50

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (D) 3 1/2 core 70 Sq. mm (

Sq. mm 1/2 core)

486 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 110.00 Mtr. 589.84

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (E) 3 1/2 core 95 Sq. mm (

Sq. mm 1/2 core)

487 Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand 413.00 Mtr. 648.42

Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in

existing trench / pipe of following size of cables (F) 3 1/2 core 120 Sq. mm (

Sq. mm 1/2 core)

488 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / 4525.00 Mtr. 151.50

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables (B) 4 core 6 Sq. mm

489 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / 230.00 Mtr. 168.67

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables (C) 4 core 10 Sq. mm

490 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 2599.00 Mtr. 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground.

491 Supplying following size of Light duty “A” Class G.I . Pipe & erecting as 85.00 Mtr. 300.98

directed by Engineer-in-charge. (B) 50 mm dia

492 Supplying following size of Light duty “A” Class G.I . Pipe & erecting as 70.00 Mtr. 696.90

directed by Engineer-in-charge. (D) 100 mm dia.

493 Providing & laying approved make Double walled corrugated pipes (DWC) of 2204.00 Mtr. 62.62

polyethylene(conforming to IS 14930 II) with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable (A)50 mm outer dia

494 Providing & laying approved make Double walled corrugated pipes (DWC) of 168.00 Mtr. 95.95

polyethylene(conforming to IS 14930 II )with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable (C)90 mm outer dia.

495 Providing & laying approved make Double walled corrugated pipes (DWC) of 354.00 Mtr. 137.36

polyethylene (conforming to IS 14930 II) with necessary connecting accessories

of same material at required depth in existing trench for laying of cable. below

ground / road surface for enclosing cable (D)120 mm outer dia.

496 Providing and, fixing heavy duty flange type brass cable gland with rubber ring 76.00 Ea. 38.38

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables. (B) 2 to 4 core 6 Sq. mm.

497 Providing and, fixing heavy duty flange type brass cable gland with rubber ring 4.00 Ea. 38.38

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables. (C) 2 to 4 core 10 Sq. mm.

498 Providing and, fixing heavy duty flange type brass cable gland with rubber ring 4.00 Ea. 51.51

for PVC insulated armoured cable complete with out going tails, insulating tape

etc for following size of cables. (E) 2 to 4 core 25 Sq. mm.

499 Providing and, fixing heavy duty flange type brass double compression type 6.00 Ea. 75.75

cable gland with rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables. (B) 3 & 1/2 core 35/50

Items Description of Item (with brief specification and reference to book of Quantity Unit Rate In Amount

No specifications) figures

500 Providing and, fixing heavy duty flange type brass double compression type 10.00 Ea. 103.02

cable gland with rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables. (C) 3 & 1/2 core

501 Providing and, fixing heavy duty flange type brass double compression type 3.00 Ea. 131.30

cable gland with rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables. (D) 3 & 1/2 core

502 Providing and, fixing heavy duty flange type brass double compression type 9.00 Ea. 140.39

cable gland with rubber ring for PVC insulated armoured cable complete with out

going tails, insulating tape etc for following size of cables. (E) 3 & 1/2 core

503 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 16.00 Ea. 13.13

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (B)

504 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 18.00 Ea. 15.15

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (C) 16/25

505 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 37.00 Ea. 20.20

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (D) 35/50

506 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 42.00 Ea. 25.25

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (E)

507 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 9.00 Ea. 40.40

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (F)

508 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 36.00 Ea. 45.45

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (G)

509 Providing and fixing approved make Perforated C type cable tray. Made from 247.00 Rmt. 622.16

sheet steel. The cable tray should be single or double bended as per required and

as per IS 2062/1079 and shall be coated with hot dip galvanizing as per IS

2629/4759. with max 17.5% perforation with coupler plate / Fish plate and GI

hardware like nut - bolt and washers etc. erection with necessary support(

included) as per Specification and as per instruction of engineer in charge.. (5)