REPAIR TO AREA DRAINAGE CULVERTS OF UNITS AND REPAIR REPLACEMENT OF HARDSTANDING CHEQUERED TILES AND INTERLOCKING PAVER BLOCKS AND CONNECTED ITEMS AT ODTD 147 AD REGT 915 WKSP AND UNIT 495 UNDER AGE B R WEST AT GE DEHU ROAD

Amount

M&L for Demolition of brick work or stone/boulder masonry , built in cement mortar including all quoins, arches, pillars etc ,but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed by Engineer-in-Charge.

M&L precast cement concrete block masonry with solid blocks made of PCC (1:3:6) type C1 using 20mm graded stone aggregate exc 10cm in width and set in CM 1:6 complete all as specified and directed

M & L for brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM 1:6 complete all as specified and directed by Engineer-in-Charge

M&L for Taking down cement plaster on brick walls/ stone walls etc of any description including raking out joints hacking for key and scrubbing down with water etc. complete all as specified & directed by Engineer-in-Charge.

M&L for rendering 15mm thick on brick work or concrete surface in CM 1:6 finished even & smooth without using extra cement complete all as specified & directed by Engineer-in-Charge.

M&L for Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar for 300 mm dia pipes, all as specified and directed by Engineer-in-Charge.

M&L for Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar for 150 mm dia pipes, all as specified and directed by Engineer-in-Charge.

M&L for reinforced cement concrete pipes class NP-2 , laid in trenches & jointed complete with collars, dia of pipe 300 mm complete all as specified and directed by Engineer-in-Charge.

M&L concrete bed to drain pipe of 300 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed by Engineer-in-Charge

M&L for reinforced cement concrete pipes class NP-2 , laid in trenches & jointed complete with collars, dia of pipe 150 mm complete all as specified and directed by Engineer-in-Charge.

M&L concrete bed to drain pipe of 150 mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete 1:4:8 type D2 using 40 mm graded stone aggregate complete all as specified and as directed by Engineer-in-Charge

M&L for Excavation in soft soil for trenches n.exc 1.5m wide and n.exc 1.5m depth for foundation , etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out

M&L for Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed.

M&L cement concrete in surface channels and drains in cement concrete 1:3:6 C-2 using 40 mm graded stone aggregate complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement including forms moulds mitred/stopped ends etc complete all as specified and directed.

M&L for cement concrete 1:3:6 type C1 (using 20 mm graded stone aggregate) as in copings, kneelers, apex, stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating complete all as specified and as directed by Engineer-in-Charge

M&L for Demolition of reinforced cement concrete in ground floor n.exc 15cm thick complete all as specified and directed.

M&L reinforced cement concrete type B1 1:2:4 (20mm graded stone aggregate) as in slab supported on walls,beams and columns in floors,roof landings, balconies, canopies deck slab and in shelves and the like complete all as specified and directed.

M&L formwork for rough finished surface to soffits of suspended slabs such as roof slabs,floor slabs,landings and similar works not exceeding 200mm thick of slab complete all as specified and directed.

M & L mild steel TMT bars 8mm dia and over, cut to length, bent to shape required, including cranking, bending, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia complete all as specified and directed by Engineer - in - Charge.

All as per Srl item No. 20 here in before but in stirrups, spacers and binder etc complete all as specified and directed by Engineer-in-Charge

M&L for Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and as directed.

M & L for 75 mm thick PCC type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and as directed

M&L for Demolition of Stone sett paving / precast concrete interlocking block paving of any description or thickness laid dry

M&L for Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.laid bedded and pointed in any mortar

M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and as directed.

M & L for cement concrete Type C2 1:3:6 (using 40mm graded aggregates) as in plinth protection 75 mm thick finished top surface even and smooth without using extra cement complete all as specified and as directed.

M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 Grade with grey cement and pigment including 25 mm thick sand cushion complete all as specified and as directed.

M&L for Demolition of un-reinforced cement concrete in ground floor and paving not exceeding 15 cm thick (below or above ground level) complete all as specified.

M & L for 75 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base complete all as specified and as directed.

M&L for 100mm thick Cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate finished surface even & smooth without using extra cement complete all as specified.

M&L for Forming construction joints 30mm deep x 10mm wide filled with sealing compound of grade 'B' complete all as specified and directed.

M&L for Forming contraction (Dummy) joints 35mm deep x 10mm wide filled with sealing compound of grade 'B' complete all as specified and directed.

M&L for Finishing surface of concrete by brooming while concrete is green complete all as specified and directed.

M&L for Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) & removing rubbish outside MD land complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement pigment to match, Complete all as specified and directed.

All as per above Except Interlocking tiles (60mm) including filling with sand cushioning ( where ever required ) including levelled with Existing tiled surfaces Complete all as spd and directed by Engineer in Charge ( Note :- Sand and PCC shall be paid and measured Separately )

M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80mm thickness, M-40 grade, finished with grey cement and pigment, complete all as directed.

All as per above Except Interlocking tiles (80mm) including filling with sand cushioning ( where ever required ) including levelled with Existing tiled surfaces Complete all as spd and directed by Engineer in Charge ( Note :- Sand and PCC shall be paid and measured Separately )

M&L for Sand filling 30mm under paver blocks for cushion Complete all as specified and directed.

M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment, set and jointed in neat cement slurry in floors over and including 15 mm thick screed bed or bedding layers in cement mortar 1:6 complete all as specified and as directed.

M&L for Preparation of old Interlocking / Tiles surfaces/ Play ground Surfaces (incl lining . marking lines etc) of any description, and applying two coats of acrylic based Tile paints over a coat of primer complete all as specified and as directed by Engineer in Charge .

M&L for Demolition of brick work or stone/boulder masonry including all quoins, arches, pillars etc , precast concrete articles and precast concrete block walling built in cement mortar complete all as specified and directed by Engineer-in-Charge.

M&L for Taking down cement plaster from brick walls/ stone walls etc. of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

M&L precast cement concrete block masonry with solid blocks made of PCC (1:3:6) type C1 using 20mm graded stone aggregate exc 10cm in width and set in CM 1:6 complete

M&L Rendering 15 mm thick in cement mortar (1:4) on concrete surfaces/brick wall surface, finished even and smooth without using extra cement complete all as specified.

M&L for Preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of cement primer complete all as specified.

M&L for Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and as directed.

M&L for 18-20 mm thick Granite (of any type) machine cut bedded and jointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including 15 mm thick screed in CM 1:4 complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) machine cut in skirting/dado laid over 10mm thick cement screed in CM 1:4 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

H S TAKHI

Dinesh Constructions

DR J S CHADHA AND SONS

Star Construction

AGREN ENTERPRISES

KARPE AND SONS CONSTRUCTION