SPECIAL REPAIR TO BLDG NO P-58 UNDER AGE B/R-I OF GE DEHRADUN

Amount

Demolition of reinforced cement concrete, of any description and in any position complete all as specified and directed.

Demolition of brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Dismantling timber scantling unframed work 40 sqcm and over in section in any position complete all as specified and directed.

Demolition cement Concrete (unreinforced) of any description and any position not other wise specifically provided for complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provide for complete all as specified and directed.

Dismantling plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar patter roof covering complete all as specified and directed.

Dismanatling wall and ceiling board (fibre pulp, insulation etc ) or insulation board /slabs/blanket any thickness, including cover fillets complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B' brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall including all quoins, arches, pillars etc. complete all as specified and directed.

Taking down cement or cement lime plaster on brick or stone wall etc. including racking out joints, hacking for key and scrubbing down with water etc. complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:6 fair faces of brick work or concrete surface finished even and smooth without using extra cement incl chicken wire mesh complete all as specified and directed.

M & L rendering 15mm thick in cement mortar 1:4 mixed with water proofing compound on fair faces of brick/ concrete surfaces finished even and smooth without using extra cement incl chicken wire mesh complete all as specified and directed. Note: WPC will be measured and paid separately under respective item of this schedule.

Supply only liquid water proofing compound @ 0.20 ml per bags of cement complete all as specified and directed.

M&L for applying interior grade wall care putty 3 mm thick (in two layers of 1.5 mm thick each) including rubbing surface of first layer to make the surface smooth incl preparation of old/ newly plastered surfaces complete all as specified and directed.

M&L for applying exterior grade wall care putty 3 mm thick to (in two layers of 1.5 mm thick each) including rubbing surface of first layer to make the surface smooth incl preparation of old/ newly plastered surfaces complete all as specified and directed

M&L for applying two coat of oil bound distemper over a coat of alkali resistant primer on newly plastered or unplastered wall or putty surface including preparation complete all as specified and directed.

M&L for applying two coats of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti alge high performance exterior wall finish with 6 years of performance warranty by manufacturer applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper, should be able to spray in hard to reach areas and penetration of distemper on the surface to achieve excellent application using limited manpower incl preparation of surfaces complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) rubbish off the premises complete all as specified nad directed.

S&F non-skid coloured ceramic tiles 8 to 10 mm thick (Square/ rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.36 Sqm in floors etc set and jointed in neat cement slurry and pointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

S&F glazed ceramic tiles coloured 9 to 10mm thick of size n exc 0.72 sqm each as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles fixed over and including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

S&F glazed ceramic tiles coloured 9 to 10mm thick of size n exc 0.36 sqm each as in vertical surfaces such as skirting/ dados etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles fixed over and including 10 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for double charged vitrified ceramic coloured tiles 10 mm thick (square/rectangular) polished area of each tiles exceeding 0.42 sqm and not exceeding 0.72 Sqm, in floorl etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tile laid over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite incl dismantling old existing stone complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-1 using 20 mm graded stone aggregate as in plinth protection or similar work/places, laid in alternate bays and filling the joints with & including bitumen and sand 1:3 by weight, surface finished even and smooth without using extra cement in ground floor and paving below or above ground level complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings or removal from site for 15 mm bore GI tubing complete all as specified and directed.

Taking up or down steel tubing and connections including cleaning for refixing with all fittings or removal from site for 20 mm bore GI tubing complete all as specified and directed.

M&L cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good cutting not exc 10cm girth complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall, ceiling or laid in floors for 15 mm bore GI tubing complete all as specified and directed.

S&F medium grade galvanised steel tubing with all fittings fixed to wall, ceiling or laid in floors for 20 mm bore GI tubing complete all as specified and directed.

S & F in repair vitreous china wash hand basin counter top white size 550mmx400mm fixed on and including , 32 mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of waste fittings etc complete all as specified and directed.

S&F in repair 15mm dia brass chromium plated centre hole wash basin mixer /sink with accessories in wash basin for mixing hot and cold water, screwed down for 15 mm dia bore GI Pipe complete all as specified and directed.

S&F in repair 15 mm bore Angle cock/stop valves, cast copper alloy, fancy type chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore bib taps long body cast copper alloy fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repair CP grating 100 mm to 125 dia round fix on floor/ nahani trap with hole/without fixed with cement mortar, complete all as specified and directed.

S &F in repair CP health faucet with 1.2 mtr metalic expandable tube & hook complete all as specified and directed.

S & F 20 mm dia brass chromium plated towel rack of 3 sets type 60cm long between flanges including pair of fixing brackets complete all as specified and directed.

S&F in repair SS grade 204 drapery rod 20mm dia including decorative brackets, decorative finals at both ends & curtain rings 8 Nos (Minimum) complete all as specified and directed.

S&F in repairs PVC connection 15 mm dia 450 mm long with brass fly nut at both ends complete all as specified and directed.

S & F in repair 5 mm thick looking mirror mounted on wall without frame fixed with CP brackets & necessary screws, of size exc 2.5 sqm but n exc 4.5 sqm complete all as specified and direced.

S & F in repair Vitreous chian wash down water closet pan (pedestal pattern) dual flush single piece EWC size 360 x 690 mm fancy type white including plastic water closet seat white closed pattern with flat bottom and cover etc complete all as specified and directed.

S&F in repair double bowl stainless steel kitchen sink made of stainless steel 1mm thick 304 Grade, coupling plug, washers and waste pipes including bedding in cement morter on to draft wall or including fixing cantilever brackets and connecting union to pipe, overall size 1000mm x 545mm x 230 mm, bowl sice 460mm x 460mm x 230mm complete all as specified and directed.

S & F in repair 75 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring joints laid in trenches complete all as specified and directed.

S & F in repair 110 mm bore UPVC (SWR) pipe pressure 4kgf/cm2 single socketed in any length with rubber ring joints fixed on wall complete all as specified and directed.

S & F in repair 75 mm bore UPVC (SWR) bend with oval acess door ,'T' , socket, reducer etc complete all as specified and directed.

S & F in repair 110 mm bore UPVC (SWR) bend with oval acess door 'T', socket reducer etc complete all as specified and directed.

S&F in repairs brass chromium plated towel ring complete all as specified and directed.

S&F in repair 32 mm Waste fittings/coupling, brass, chromium plated for sinks, basins, etc. with long screwed shanks and fly-nuts complete all as specified and directed.

S & F rotational moulded polyethylene water storage tanks 1000 litres capacity tripple layer, white colour, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including dismantling of existing unserviceable tank and removing from site, complete all as specified and directed.

M & L in repair 75 mm CI spun casted floor trap with grating including jointing with solvent cement 75mm bore outlet complete all as specified and directed.

S & F ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe and fixed for 20 mm bore dia (Minimum weight 210 gms) complete all as specified and directed.

S & F in repairs glass corner shelf suitable size made of 5 mm thick toughned glass complete all as specified and directed.

S & F in repairs glass shelf assembly consisting of 5.5 mm thick toughned glass with chromium plated guard and railing size 500x125 mm with brass bracketcomplete all as specified and directed.

S & F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.

S & F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.

S & F PVC (SWR) branch pieces 75 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

S & F PVC (SWR) branch pieces 110 mm bore single (equal or unequal) with oval access door complete all as specified and directed.

M&L for aluminum alloy powder coated standard hollow section as mentioned below window frame (Bombay sliding) with two glazed shutter andone nos wire gauged shutter sliding type, with aluminum sections as per Series-A (15mm) 3 track of Jindal section numbers for sliding windows, and glazed with tinted glass coloured glass 4mm thick, fixed with glazing clips, rubber beading / gasket anodised beading, screw and lock type handle of size 75mm, 2 Nos aluminum tower bolt 150mm long etc complete all as specified and directed. Shutter Top & bottom size : 37.50x15x1.60mm Shutter inner lock size 37.50x15x1.60 mm Shutter side (Handle) size 37.50x15x1.36 mm Chowkhat bottom size : 50.30x26x1.20mm Chowkhat top & sides size: 50.30x26x1.00mm

Excavating in post holes (or similar holes) each n.exc 0.5cu m, getting ut,returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding, 25cm watering and removing surplus soil to a distance n exc 50m and making good surface in hard/dense soil complete all as specified and as directed.

S&F auto closing hinges 35mm of 0 crank (KH-001) OR 8 crank (KH-002) open able at 110 degree for kitchen cabinet shutters stainless steel complete all as specified and directed.Make : Hexa/Hettich/Hafele

S&F Ball bearing runner 45 mm Telescopic (KTS-20) full extension load capacity 50 kgs, complete all as specified and directed.

S&F stainless steel handle fency type 100 mm size for kitchen cabinet shutters complete all as specified and directed.

S&F magnet catcher for cub board with brass body and striking plate including letting in and fixed complete all as specified and directed.

S&F in repair chrome plates stainless steel wire basket (storage basket) pull out type for large utensils, size 480x500x150mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.

S&F in repair chrome plates stainless steel wire basket (cup and saucer basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. Make : Hexa/Hettich/Hafele

S&F in repair chrome plates stainless steel wire basket (plate basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. Make : Hexa/Hettich/Hafele

S&F chrome plates stainless steel wire basket (cutlery basket) pull out type for large utensils, size 380x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed.Make Hittich/Hafele/Butterfly.

S&F in repair chrome plates stainless steel wire basket (Grain Trolley) pull out type for large utensils, size 480x500x100mm of Grade 304 with necessary fixing clips etc complete all as specified and directed. Make : Hexa/Hettich/Hafele

Taking down chowkat with shutter area exc 1.5 sq.m but n.exc 4 Sqm each complete all as specified and directed.

Taking down chowkat with shutter area n.exc 1.5 sqm each complete all as specified and directed.

M&L cutting holes in brick wall built in cement mortar exc half brick but nexc one brick for inserting or cement concrete 1:2:4 hold fast etc and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified and directed.

S & F Ist Class Hardwood sigmental worked from the solid, straight chowkhats and frames wrought, framed rebated,on the solid rounded or chamfered , put together with glue pinned at joints complete all as specified and directed.

M&L 40mm thick Ist class hard wood door/window panelled shutters (two panels) with lock rail and panel of 9 mm BWP commercial ply.The size of rail and stile as per IS:1003 (Part1),kiln seasoned and chemically pressure treated, all as specified and directed.

S&F 35m thick Ist class wood door/window glazed and skeleton shutter open rebated and prepared to receive glass/ gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitered beads or clearing glass etc, size of members of shutters as specified in SSR part I section 8 clause 8.20 (a) of IInd class hard wood complete all as specified and directed.

S&F factory made 100% solid wood plastic composite (WPC) door frame of size 75 mm x 50 mm made from wood plastic composite (single extruded process) material with density 780 Kg/Cum from ISO certified company door should be water proof termite proof fire retardant and having good screw holding capacity all as specification and drawing complete all as specified and directed.

S&F 24 mm thick moulded WPC factory made 100% solid door (conforming as per IS-4020) made from 100% lead free single extruded with 2, 4 or 6 raised panel design on the front side with 10 mm deep mould on single side with wood grain texture and back side plain with density not less than 600 Kg/cum. Manufactured by an ISO : 9001-2015 certified company. The door should be water proof, termite proof, fire retardant and having screw holding capacity complete all as specified and directed.

S&F 150 mm Stainless steel Hasp and staples safety type, stove annnealed black including bolt to hings plate and fixed with screwed complete all as specified and directed.

S&F 200mm Stainless steel barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 125mm Stainless steel barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150mm Stainless steel handles cast type anodised complete all as specified and directed.

S&F 125mm Stainless steel handles cast type anodised complete all as specified and directed.

S&F 100 mm size Stainless steel butt hinges fixed/ welded to frame complete all as directed complete all as specified and directed.

S&F galvanised mild steel wire cloth 0.45 mm nominal dia of wire and average aperature 1.18 mm complete all as specified and directed.

S & F Brass Mortice lock 4 levers vertical type, size 100 mm all as specified and directed.

S & F Extruded brass handle 300mm long fabricated type polished all as specified and directed.

S & F Extruded brass tower bolt 500mm long fabricated type polished all as specified and directed.

M & L for french polishing on surface of any description width or girth including cleaning and preparing the surface including a coat of wood filler on new works with two or more coats complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed.

S&F in repair floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring, fixed to floor of size 140 mm complete all as specified and directed.

S&F roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410-W(Gde E-250) quality-A complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane complete all as specified and directed.

S&F in repairs plate rack 200mm and size 60 x 75 cm made out off 1.00 mm thick stainless steel complete all as specified and as directed.

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness one side prelaminated consisting of panel of WPC profile of 18mm (+ 0.7mm) thick of denisity 580 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of WPC lining of plain/prelim coloured WPC sheet using incl demolation old board any type etc complete as per manufacture specification.

S&F factory made 100 % solid wood plastic composite (WPC) flush type shutter of 18mm thickness both side plain consisting of panel of WPC profile of 18mm (+ 0.7mm) thick of denisity 580 kg per cum manufactured by ISO-9000 certified company using for shutter cillicia ply 18mm thick and fixed with frame. The thickness of shutter is edges painted by matching colour of WPC lining of plain/prelim coloured WPC sheet using incl demoliation of old board any type etc complete as per manufacture specification.

S&F magnetic catcher and striking plate including letting in and fixed complete all as specified and directed.

S&F Continious (PIANO) hinges, mild steel, bright finish or electrogalvanised. 30 mm width of flaps (when open) complete all as specified as directed.

M&L for PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in cills, copings, benching on chajjas, roof kerbs, bed blocks , on Roof top and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work complete all as specified and directed.

M & L for PCC, treating of joints, filling of honey combs with using crack fill chemical of Dr Fixit or STP and providing PCC (1:3) with 4 to 7 mm size stone chipping (1 Cement : 3 Stone Aggregate) (If ordered by Engineer-in-Charge) incl demolition of Mud phuska and other old existing surface in roofs, any thickness ( whether full thickness removed or only a part therof complete all as specified and directed.

M & L for rendering 15 mm thick in cement mortar 1:3 with WPC as per manufacture instruction complete all as specified and directed.

M & L for taking down existing treatment (membrane) including picking, sweeping clean and washing down with water to remove dust & providing APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/sqm) laid on primed surface by forced application, shall be laid over hot blown bitumen grade 85/25 conforming to IS 702 @ 1.2 kg per Sqm over a coat of bituminous primer and applying aluminium reflective paint over it complete all as specified and as per manufacturer's instructions.

Use and waste Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) of fair finished surfaces complete all as specified and as directed.

M & L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on wall, beam and columns in floors ,roof slabs, shelves and cover slab complete all as specified and as directed.

S&F mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips (TMT) complete all as specified and directed.

M&L for TMT bars 6 to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed.

M&L 65-70mm thick Pre-Cast Factory made RCC M-30 as in Cover Slab in different size of Manholes, Septic Tanks or Similar Articles with Plain Faces, all round 1mm thick plain sheet on the edge painted with bituminous paint on external surface and RCC cover should be engraved CA No and MES and set in Cement Mortar 1:4, including dismantling of existing cover complete all as specified and as directed.

Providing and fixing "PVC False Ceiling consisting of (PVC hollow panel including U Bidding, L Bidding screw) , 5 mm (.25) thick plain embossed PVC sheet of Density 600 kg /Cbn Manufactured by an ISO -9001-2015 certified Company incl louvers panel 150x12 mm weight .75 Kgs used as panel insert in a frame work using powder coated aluminium T-section of sizes (25x25mm,19 gauge or 1 mm thick) in square pattern of grid distance 2.5 mtr .The aluminium frame work is supported frm the ceiling with the help of 'J' hook adn GI wire/6 mm MS Rods, of required sizes to maintain proper level etc, The aluminium frame work is supported on side wall with the use ot alumimium L Section of (25x25 mm) angles etc complete as per direction of Engineer-in-Charge and manufactures specification & instructions .

Providing and fixing in positon POP false ceiling flat/curved over GI metal frame work of applied quality and wiremesh as per description. The main GI frame (50x25mmx 24 gauge) shall be at 600mmx600mm c/c and intermediate frame (266mmx19mm x 24 Gauge) Shall be at 375mm C/C. The main GI member to be hanged with help of GI angle of 25mmx25x24 gauge and additional MS flats 25x3mm (Red oxide painted) and SS dash fasteners including all necessary work required expandal metal mesh (0.75Kg/Sqm) shall be firmly stretched and screwed to the intermediate frame with GI washer and average 20 mm plaster of paris to be applied on in two layers, Necessary provisoion & Making shall be made for cut outs for air conditions supply return air grills slits light fittings smoke detector and music speaker etc by providing 6 mm bwr ply templates. The job shall include making steps,ceiling vertical surfaces, cove in curvature & strainght pelment facia, recess for light, curved ceiling grooves etc as per detail in description . The job shall also include hardwood frame required for fixing AC grill all as specified and directed by Engr-in -Charge.

Providing and fixing "PVC False Ceiling consisting of 600mmx600mm, 5 mm thick plain embosed PVC sheet of Density 600 Kgs /Cbn manufacture by an ISO -9001-2015 certified Company used as panel insert in a frame work made using powder coated aluminium in square pattern of grid size of (600x600mm0 .The aluminium frame work is supported from the ceiling with the help of 'J' hook and GI wire/6 mm M.S. Rods, of required sizes to maintain proper level etc, The aluminium frame work is supported on side wall with the use of t alumimium L- Section of (25x25 mm) angles etc complete as per direction of Engineer-in-Charge and manufactures specification & instructions .

S&F in repairs decorative wall panelling with base frame of 50x25mm aluminium frame 600x600mmx16 gauge c/c fixed on wall with L-cleat and bothway screw etc. 12 mm ply on base frame with 4 mm decorative veneer of applied shed and melamine polish on veneer complete all as specified and directed.

Excavation in trenches in soft/floose soil n.exc 1.5m depth and nexc 1.5m width for foundation etc and getting out complete all as specified and directed.

Returning filling including spreading levelling watering and well ramming in layers not exceeding 25 cm thick in loose/soft soil complete all as specified and directed.

Removing excavated soil to a distance n exc 50mtr depositing where directed at a level n exc 1.50 mtr above the starting point complete all as specified and directed.

S&F salt glazed stone ware (SGSW)/PVC drain pipe of internal dia 150 mm laid in trenches and jointed in CM 1:1 grade 'A' complete all as specified and directed.

M& L for cement concrete 1:4:8 type D-2 (using 40 mm graded stone aggregate) to bed of drain pipes including packing under and haunching against the sides of pipes, after they are laid and tested for 150mm bore pipe complete all as specified and directed.

M&L for PCC 1:3:6 Type C-1 using 40mm graded stone aggregate as in surface channel drain, etc including necessary form work complete all as specified and directed.

Dismantling of Trellies work (Jafri), including taking as underof batterns in trellis (posts and rails measured separately) complete all as specified and directed.

Providing and fixing factory made 18 mm thick 100% solid WPC (wood Polymer composit) Jali, of required size comprising of virgin polymer of K value 58-60 (Suspension Grade) ,calcium carbonate and natural fibrs ( wood powder /rice husk/wheat husk) and non toxic additives made from extrution process WPC foam sheet Single extruded (inner) with having minimum density not less than 650 Kg/cum manufactured by certified company having good screw holding capacity (Screw withdrawal strength of 2000N (Face) & 1100N (Edge),minimum compressive strength 50N /mm2 and resistance to spread of flame of classA category with properties of being termite/borer proof,water/moisture proof and fire retardant. WPC jali to fixed with Stainless steel butt hinges (if Required)of required size with necessary full body threaded star headed counter sunk SS Screws. All as per direction by the Engineer -in-Charge. Material test cerfificate and authentication should be compulsory provided by the manufacture company.

One light point, controlled by one way switch.

One fan point, controlled by one way switch through regulator.

One three pin 5 Amp socket on same board with other switches

One three pin 5 Amp socket on independent board

All as per item No. 119 here in before but point wiring with 4 sqmm multistrand copper conductor cable for one six pin socket outlet 15 Amps controlled by one switch on independent board and 4sqmm PVC insulated multi strand copper conductor cable as continous earth wire.

S&F modular switch single pole one way, one module, 230 Volts 6 Amp complete all as specified and directed.

S&F modular socket 6 Amps, 2/3 pin combined, two module, 230 Volts complete all as specified and directed.

S&F modular switch single pole one way, one module, 230 Volts 16 Amp complete all as specified and directed.

S&F modular socket 16 Amps, 2/3 pin combined, two module, 230 Volts complete all as specified and directed.

S&F modular ceiling rose, three terminal ISI marked surface bakelite suitable for batten fitting complete all as specified and directed.

S&F energy efficient LED tube light fittings 20 Watts, 230 volts with efficiency of not less than 100 lumens per watt, PC extruded body with PC diffuser including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

S&F mirror light decorative compact luminarious with decorative ends caps 9/10 Watt LED with all accessories and including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S&F Exhaust fan exhaust fan made of steel body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 450mm, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted)

S&F ceiling fans complete with blades, down rods, electronic regulator (min 100w), Fan hook split type fabricated out of 12mm dia steel bar of length 30 cm duly painted with rod oxide old black paint and all accessories required to connection, 230 V, 1320 mm sweep, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Model No FHEWTISPCH48

S&F Exhaust fan made of sturdy Engineering plastic body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep250 m, complete with louvers, shutters and connecting up ceiling rose to connector block of fan including making of holes and grouting of nuts and bolts PCC (1:2:4) B-1 block complete all as specified and directed. Note : Old fan should be deposited to MES store (Test certificate of fan to be submitted)

S&F ceiling fans complete with blades, down rods, electronic regulator (min 100w), Fan hook split type fabricated out of 12mm dia steel bar of length 30 cm duly painted with rod oxide old black paint and all accessories required to connection, 230 V, 1200 mm sweep, Min air delivery 210 CFM with service value 6.00 BEE, Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

2 x 6 Sqmm + 1 x 6 sqmm

2 x 4Sqmm + 1 x 4 sqmm

S & F in replacement 4 Way VTPN DB epoxy powder coated TP & N (VTPN MCCB DB) fabricated from minimum 1.6 mm thick CRCA sheet and fixed/ flush to wall with suitable capacity fully insulated copper Bus Bar for each phase and 02 neutral shrouded bar ,2 earth bar and cable tie for cable management with reversible door for IP-43 protection,415 volt and suitable for fixing FP MCCB 100/125 Amps as incomer and combination of SP/TP MCBs as outgoings complete all as specified and directed. Note: Suitable MCCB and outgoing MCBs will be measuredand paid separately under relavant items of this schedule.

S & F in replacement MCCB,4 pole ICS=100% ICU at 415 volts with thermal-magnetic release and adjustable overload setting 63 Amps with rupturing capacity 16 KA complete all as specified and directed.

S & F in replacement MCB SP 6 to 32 Amp 240 volts 'B' Curve 10 KA. including connection with suitable size copper lugs complete all as specified and directed.

S & F in replacement MCB SPN 40 to 63 Amp 240 volts 'B' Curve 10 KA. including connection with suitable size copper lugs complete all as specified and directed.

S & F in replacement Distribution box MCB Protected socket with Plastic enclosure (Surface mounitng ) with 20 AMP MCBSP Combo box DP including plug top complete all as specified and directed.

S & F in replacement 8 way SPN DB MCB DB, sheet metal enclosures double door.The DBs should be supplied with tin platted insulated copper bus bar rated for 100A. 240 volts with IK09 type with blanking plates where required and IP 43 degree protection complete all as specified and directed.

Material and labour for Earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick burried directly in ground (earth pit not less than 2.25 metres deep below normal ground level) vertically, with top edge of plate not less than 1.5 metre below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of MES Schedule Part-I connecting to earthing test point & to main switch board and testing on completion with and including necessary excavation and earth work in any type soil, earth lead connected to earth test point & to main switch board etc. GI medium grade watering pipe 20 mm dia with funnel and wire mesh and 15mm dia GI light grade earth lead protection pipe etc complete all as specified and directed. Note: (i) Earth lead wire and its protection pipe upto and including 7.5 mtr from the top of earth electrode are included under this item. (ii) Any joints in earth lead from earth electrode to test point shall not be allowed/permitted.

M/s Dev Enterprises (BID ID -3439862)

M/s Anil Kumar (BID ID -3438523)