Tender ID

Kerala

AOC

Works

Civil Works - Buildings

Nagalassery Gramapanchayath 2025-2026, Project No195, (Spill over No- 369) Vattaparambu Anganwady Maintenance

Local Self Government Department

Office Of Assistant Engineer, Nagalassery GP | Palakkad, Kerala

Amount: ₹4.2 LCloses: 6 Oct 2025Closed

Tenderkart AI

Reads all tender documents

Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.

Timeline

Published27 Sept 2025
Closed6 Oct 2025
Awarded1 Nov 2025

Bids

Item Rate

2 Bids1 Nov 2025

#	Company	Amount	Rank	Status
1	Mohanan P-Works Contractor L1₹4.2 LAccepted-AOC	₹4.2 L	L1	Accepted-AOC L1
2	Moidunni P.P-Works contractor L2₹4.3 L+₹6,864.75 (1.64%)Rejected-AOC	₹4.3 L+₹6,864.75 (1.64%)	L2	Rejected-AOC L2

BoQ Comparative

Line Items (19)

Sl No	Description	Qty	Unit	Moidunni P.P-Works contractor L2	Mohanan P-Works Contractor L1
1.00ANGANAWADI MAINTANANCE
1.00	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.46	cum	361 ₹164.62	355 ₹161.88 Lowest
1.00	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.27	cum	7,934 ₹2,142.18	7,852 ₹2,120.04 Lowest
1.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.54	cum	9,236 ₹5,015.15	9,142 ₹4,964.11 Lowest
1.00	4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns	4.98	sqm	387 ₹1,927.26	382 ₹1,902.36 Lowest
1.00	15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below	1	each	381 ₹381	375 ₹375 Lowest
1.01	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.14	cum	6,832 ₹942.82	6,762 ₹933.16 Lowest
1.01	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	4.2	cum	7,715 ₹32,426.15	7,635 ₹32,089.91 Lowest
1.01	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	793.88	kg	196 ₹1,55,600.87	192 ₹1,52,425.34 Lowest
1.01	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	83.92	sqm	843 ₹70,741.19	833 ₹69,902.03 Lowest

Tender Value

₹4.2 L

EMD Value

₹10,582

Closing Date

6 Oct 2025, 11:00 amClosed

Tender Inviting Organisation

Name

Assistant Engineer

Address

Office of Assistant Engineer, LID EW Section, Nagalassery Gramapanchayath, Koottanad

Work Description

Nagalassery Gramapanchayath 2025-2026, Project No195, (Spill over No- 369) Vattaparambu Anganwady Maintenance

Tender Information

Tender ID

2025_LSGD_802330_15

Reference Number

04-AE-LIDEW-NGP-2025-26

Tender Type

Open Tender

Product Category

Civil Works - Buildings

Form of Contract

Item Rate

Period of Work

180 days

Location

Office Of Assistant Engineer, Nagalassery GP

Source Website

Subscribe to view

Eligibility / Pre-Qualification

Please refer Tender documents.

Documents Required

7 documents required · 7 mandatory

Fee/PreQual/Technical/Finance

RequiredBOQ (.xls)

RequiredSBD (.pdf)

RequiredPreliminary Agreement (.pdf)

RequiredE Pay (.pdf)

RequiredForm of Tender, Fee Remittance (.pdf)

RequiredAffidavit, Integritypact Certificate (.pdf)

RequiredLicence, Aadhar, PAN, GST (.pdf)

Fee & Financial Details

Tender Fee Amount

₹935

Tender Fee Exemption Allowed

Yes

EMD Fee Amount

₹10,582

EMD Fee Exemption Allowed

Yes

Important Dates

Last Activity

1 Nov 2025

Published

27 Sept 2025

Bid Opening

7 Oct 2025

Download Starts

27 Sept 2025

Download Ends

6 Oct 2025

Submission Starts

27 Sept 2025

Stage Documents

Stage Summary Snapshot

stage.html

html • 0.04 MB

Technical Evaluation

tech_eval.pdf

PDF

Financial Evaluation

fin_eval.pdf

PDF

Award of Contract

aoc.pdf

PDF

Bid Opening Summary

finance_1334564.pdf

PDF

boq_comp_chart.xlsx

xlsx

Documents

Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.

Tender Page Snapshot

details.html

html • 0.04 MB

Ready to Participate?

Download all tender documents and submit your bid

Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .

Loading…

Company

Mohanan P-Works Contractor

L1₹4.2 LAccepted-AOC

Moidunni P.P-Works contractor

L2₹4.3 L+₹6,864.75 (1.64%)Rejected-AOC

Sl No	Description	Qty	Unit	Moidunni P.P-Works contractor L2	Mohanan P-Works Contractor L1
1.00ANGANAWADI MAINTANANCE
1.00	2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil	0.46	cum	361 ₹164.62	355 ₹161.88 Lowest
1.00	4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)	0.27	cum	7,934 ₹2,142.18	7,852 ₹2,120.04 Lowest
1.00	4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)	0.54	cum	9,236 ₹5,015.15	9,142 ₹4,964.11 Lowest
1.00	4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns	4.98	sqm	387 ₹1,927.26	382 ₹1,902.36 Lowest
1.00	15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below	1	each	381 ₹381	375 ₹375 Lowest
1.01	50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete	0.14	cum	6,832 ₹942.82	6,762 ₹933.16 Lowest
1.01	50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete	4.2	cum	7,715 ₹32,426.15	7,635 ₹32,089.91 Lowest
1.01	10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes	793.88	kg	196 ₹1,55,600.87	192 ₹1,52,425.34 Lowest
1.01	12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.	83.92	sqm	843 ₹70,741.19	833 ₹69,902.03 Lowest

Sl No

Description

Qty

Unit

Moidunni P.P-Works contractor

Mohanan P-Works Contractor

1.00ANGANAWADI MAINTANANCE

1.00

2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil

0.46

cum

361

₹164.62

355

₹161.88

Lowest

1.00

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

0.27

cum

7,934

₹2,142.18

7,852

₹2,120.04

Lowest

1.00

4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources)

0.54

cum

9,236

₹5,015.15

9,142

₹4,964.11

Lowest

1.00

4.3.1:Centering and shuttering including strutting, propping etc. and removal of form work for:Foundations, footings, bases for columns

4.98

sqm

387

₹1,927.26

382

₹1,902.36

Lowest

1.00

15.12.1:Dismantling doors, windows and clerestory windows (steel or wood ) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead:Of area 3 sq. metres and below

each

381

₹381

375

₹375

Lowest

1.01

50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete

0.14

cum

6,832

₹942.82

6,762

₹933.16

Lowest

1.01

50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete

4.2

cum

7,715

₹32,426.15

7,635

₹32,089.91

Lowest

1.01

10.16.1:Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes

793.88

196

₹1,55,600.87

192

₹1,52,425.34

Lowest

1.01

12.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

83.92

sqm

843

₹70,741.19

833

₹69,902.03

Lowest