Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.0 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹49.5 L+₹5.2 L (11.6%)Rejected-Finance | L2 | Rejected-Finance Become L2 |
Tender Value
Refer Docs
EMD Value
₹89,000
Closing Date
18 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Tezpur
GE South Tezpur Mission Chariali Tezpur, Assam
PROVN OF CERTAIN SANCTIONED WORKS OF AGE (P) (PHASE-6) AT TEZPUR UNDER GE (S) TEZPUR
2022_MES_535551_2
8673
Open Tender
Civil Works
Item Rate
180 days
GE South Tezpur
As per NIT
4 documents required · 4 mandatory
₹500
Yes
GE South Tezpur
₹89,000
Yes
28 Sept 2022
4 Aug 2022
20 Aug 2022
4 Aug 2022
18 Aug 2022
5 Aug 2022
Amount
Surface excvation n.exe 30 CM deep and avg 15 CM deep and getting out in soft/loose soil, complete all as specified and as directed.
Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in loose/soft soil. Complete all as specified and as directed.
Returning , filling in including spreading levelling, watering and well ramming in layers not exc 25 cm thick, complete all as specified and as directed.
Removing excavated material (soil) n exc 50m and depositing where directed at a level n exc 1.5m above the starting point, complete all as specified and as directed.
M & L for PCC 1:4:8 type D2 using 40 mm graded aggregate as in foundation filling and mass concrete, complete all as specified and as directed.
Demolition of brick work or stone masonry built in cement mortar including all quoins arches, pillar etc but excluding ashlar facing, dressed stone work and precast concrete articles complete all as specified and directed.
M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in Cement morter 1:6, complete all as specified and as directed.
M&L Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius i n half brick thick walls, built in cement mortar 1:6, complete all as specified and as directed.
Dismanting timber scantling 40 Sqcm and over in secion in any position in framed work, complete all as specified and as directed.
Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets all as directed.
S&F false ceiling with powder coated exposed G.I. grid suspension system Everest E-Grid T-2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200 mm c/c) consisting of Main Runner (3600 mm long, 0.25 mm thick, 38mm height) Cross Tee (1200mm/600mm long, 0.25 mm thick, 27 mm height) and Wall Angle (3000 mm long, 0.4 mm thick, 22 mm height). The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300 mm c/c. The Main Runners to be placed @ 1200mm, The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm x 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600mm x 600mm. Grid of module size 600mm x 600mm shall be supported by 4 mm dia G.I. wire from purlins/soffit. 4 mm thick High Pressure Steam Cured Everest Non Asbestos Fibre Cement Designer Ceiling Board or equivalent quality having Density>1200 Kg/m3, size 595mm x 595mm, confirming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7&8, should be placed in the Grid module to form a False Ceiling, complete all as specified and as directed.
Taking down chowkats or frames not exc 1.5sqm each with shutters( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and as directed.
Taking down chowkats or frames exc 1.5sqm and not exc 4.0 sqm each with shutters ( without taking off shutters from the frame ) including dismantling of PCC bed blocks for hold fasts, complete all as specified and as directed.
Refixing of shutters of any description exc 1.00 Sqm and n.exc 2.00 sqm each in same opening including of taking down, easing, adjusting and renewal/refixing of builders hardware as required including renewal of unserviceable screws, etc, complete all as specified and as directed.
S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc complete shall as specified etc complete all as specified and as directed
S&F standard aluminium powder coated section (Minimum thickness of powder caoting shall be 50 micron and colour shall be approved by Engineer-in-charge) door shutter aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 02 Nos in each door , hinges ,anodised aluminium snap beading, screws etc, complete all as specified
S&F standard aluminium powder coated section (minimum thickness of powder coating shall be 50 micron and colour shall be as approved by GE) for window (sliding three track/two track/fixed or louver type) and ventilator shutters, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing or gaskets for fixing glass, anodised aluminium snap beading, screws, anodised aluminium fittings such as locking arrangement , screws, plugs, handle, lock, roller, Nylon ball bearing etc, complete complete all as specified Note Glass and wire mesh shall be measured and paid separately under respective items, complete all as specified and as directed.
Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted or forged into spikes, framed guard bar, barred iron doors, ladder, framed balusters, railing, frame work for water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
M&L for pressed steel frames for doors with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc. complete , of frame size 105 x 60 mm and thickness of sheet 1.25 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.
M&L for pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc. complete, of frame size 125 x 60 mm and thickness of sheet 1.25 mm, including one shop coat of red oxide zinc chrome primer complete all as specified and directed.
S&F 30 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, complete all as specified and as directed.
Supply and fix 30mm thick second class hard wood glazed and skeleton, open rebated and prepared to receive glass/ wire cloth, gauze exc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. The sizes of members of shutters as per IS-1003 (Part-2), kiln seasonable and chemically pressure treated and fitted to chowkhats complete all as specified and directed. (Note : Glass / wire cloth wil be measured and paid separately), complete all as specified and as directed.
S&F Solid PVC frame of size 50mm x 47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life) etc complete all as specified and as directed
S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification, complete all as specified and as directed.
S&F 100 mm thick mild steel butt hinges,medium weight and fixed etc complete all as specified and as directed
S&F 75mm size type C-21 Butt hinges extruded aluminium alloy with galvanised MS sheet hinges pin anodised.
S&F Aluminium handles, 150 mm size, cast type anodized complete all as specified and directed by Engr-in-Charge. .
S&F extruded aluminium alloy handels fabricated type, anodised, 100mm long, complete all as specified and as directed.
S&F Aluminium anodised barrel tower bolts, 200mm long, of extruded section complete all as specified and directed by Engr-in-Charge.
S&F Aluminium anodised barrel tower bolts of extruded section 150 mm long and fixed with screws, complete all as specified and as directed.
S&F Aluminium alloy anodised sliding door bolts, of 300 mm long with hasp, staple (bolt type) fixing clips of sheet cast or extruded section, fixing bolts and sliding bolts of extruded section complete all as specified and directed by Engr-in-Charge.
S&F 4 mm Sheet glass, ordinary quality and glazing with oil putty with glazing clips or aluminium beading in square n exc 0.5 sq. m in each pane, complete all as specified and as directed.
S&F 4 mm thick frosted/ pin headed glass in ventilator shutters all as specified and directed by Engr-in-Charge
S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples,wooden beads,aluminium beading, complete all as specified and as directed.
M&L 2nd CL HW plain fillets square, rectangular in section clean sawnn sectional area exe 13 sqcm & n.exe 25 sqcm fixed with nails including one coat of black oil, complete all as specified and as directed.
M&L Reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) Beams, cantilevers, bressummers, lintels over 1.5m span and the like, complete all as specified and as directed.
M&L Reinforced cement concrete Type B1 1:2:4 (20mm graded aggregate) as in shelves, slab and the like, complete all as specified and as directed.
M&L Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping), complete all as specified and as directed.
Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc., complete all as specified and as directed.
M&L TMT bars 10 mm dia and over , cut to length, bent to shape required, including crancking, bending spirally for hooping for columns ,hooking ends & binding with and including MS wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified & as directed.
M&L TMT bars 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, complete all as specified and as directed.
Supply & fixing of pre-painted colored trapezoidal profiled Galvalume/Zincalume sheet with 0.5mm thick of any colour ,tensile strength of 550Mpa as in roof covering ,cladding to wall ,ridge,gutter etc fixed with self tapping screws as specified.
All as per item No.42 above but plain sheet for ridge ,gutter etc fixed with self tapping screws as specified.
M&L Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates Fe-410- W(Gde- E-250) quality- B, complete all as specified and as directed.
Taking down cement plastering on brick or stone walls etc, including raking out joints, hacking for key scrubbing down with water etc, complete all as specified and as directed.
M&L rendering 15 mm thick cement plaster on brick wall in CM 1:4 mixed with WPC @ 2% by weight of cement or as per manufacture instruction and finished even and smooth without using extra cement complete all as specified and as directed. (Note : WPC will be measured and paid for separately), complete all as specified and as directed.
M&L 10mm thick rendering in cm (1:6) on fair faces of brick work or concrete surfaces and finished even and smooth without using extra cement, complete all as specified and as directed.
Supply only liquid water proofing compound as specified and as directed.
M&L Applying two coats of Oil bound distember by smart painting method to newly plastered/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer including preparation of newly platsered wall all as specefied and directed.
M&L preparation of new plaster surface or complete removal of old plaseter sufaces and appplying two coats of weather coat(Apex) over one coat of damp proof primer over 1 mm thick putty to wall/chajja of external surface as per manufacturer instruction and apllied by approved applicator complete all as specified and directed.
M&L complete removal of old plaseter sufaces and appplying two coats of Oil bound distember by smart painting method to old/previously untreated wall over a coat of 1 mm layer wall care putty over a coat of primer complete all as specefied and directed.
M&L complete removal of old plaseter sufaces and appplying two coats of weather coat(Apex) over one coat of damp proof primer over 1 mm thick putty to wall/chajja of external surface as per manufacturer instruction and apllied by approved applicator complete all as specified and directed.
M&L one coat of white wash on ceiling and cornices including preparation of old plastered or un plastered of surafce of ceiling by brooming down or steel wire brushing ,srcaping down smoke soot ,moulds ,moss and efflorescent salts and trading oil and greasy spot all as specified and directed
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc, complete all as specified and as directed.
M/L Granite (of any type) tiles 18-20 mm thick machine cut (table rubbed and polished), bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 15mm thick screed bed in CM 1:6 over cooking platform including grinding the edges half round and polishing including etc complete all as specified and directed.
M&L 18-20 mm thick Granite (of any type) tiles machine cut (table rubbed and polished), in skirting/ dado laid over cement screed and jointed with grey cement slurry, and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over 10mm thick screed bed in CM 1:4 including grinding the edges half round and polishing including etc complete all as specified and directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding(but not backing) complete and removing rubbish off the premises complete all as specified and directed.
Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc. laid bedded and pointed in any mortar complete all as specified and directed.
M&L 25 mm thick PCC type B-1, 1:2:4 (20mm graded aggregate) as in sub base/floor etc complete all as specifed and as directed.
S&F Coloured Glazed ceramic tiles 450 x 350 mm x 6 to 7mm thick, in skirting /dado etc set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed
M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.
M&L Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 for laying floor finishes complete all as specified and as directed.
All as per item No 62 above but in skirting/dado set and jointed in neat cement slurry and pointed in white or coloured cement to match etc complete including rendering 10 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surface as backing coat coat of dado/skirting etc complete all as specified and as directed
Supplying and laying of 16mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or conceled complete all as specified.
Supplying and laying of 20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or conceled complete all as specified.
Supplying and fixing 16mm dia CPVC Brass Elbow complete all as specified.
Supplying and fixing 16mm dia CPVC Brass Tee complete all as specified.
Supplying and fixing 20mm dia CPVC Brass Elbow (3/4 X ½) complete all as specified.
Supplying and fixing 16mm dia CPVC Female Brass Threaded Adaptor (FTA /FBTA) complete all as specified.
Supplying and fixing 20mm bore CPVC Gate valve/stop cock complete all as specified.
M&L for 150mm thick cement concrete 1:3:6 type C2 ( using 40 mm graded stone aggregate) as in foundation, filling and mass concrete complete all as specified and as directed.
M&L 100 mm thick Cement concrete 1:3:6 type C-2 Concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they arelaid and tested, complete all as specified and as directed.
M&L for 75mm thick pcc type C-2, 1:3:6 (using 40 mm graded aggregrate) as in sub base, flooring, plinth protection Finishing cement concrete surface even and smooth Without using extra cement, complete all as specified and as directed.
M&L Sand filling under floors or in foundations or in trenches including watering and consolidation, complete all as specified and as directed.
Hardcore of guage n exe. 63 mm deposited spread and levelled in layers n exe 15 CM thick watered and rammed to a true surface (broken stone or bloulders), complete all as specified and as directed.
M&L Machine pressed precast concrete interlocking paver block (Glazed finish) with Grey cement and pigment any shape any size confirming to IS 15658-2006 of 60 mm thickness, M-30 Grade over a sand cushion of 50mm thick (rate included), complete all as specified and as directed.
M&L for continuous pre cast PCC type B1 1:2:4 20mm graded aggregate grade solid blocks factory made of size 300 X 450 X 200 mm bevelled or mitred edge set in cement mortar (1:4) complete all as specified and as directed.
Supply and fix, vitreous china wash down water closet pan (Pedestal pattern) 'P' or 'S' trap, white (excluding flushing cistern and flush pipe) including seat cover white closed type complete all as specified and directed
Supply and fix, as in repair, vitreous china wash basin, white, flat back size 580 x 450 mm, excluding taps, waste chain, plug and porcelain stopper but including brackets, cutting for and pinning in ends of bracket or erecting stand complete all as specified and directed.
Supply and fix, bowel urinal flat back of size 465 x 355 x 265mm (minimum), white, with grating and union for discharge pipe, (excluding flushing cistern, flush pipe and waste pipe) complete including providing and fixing plugs, bedding urinals against wall in cement mortar (1:2) securing urinals to plugs with and including 60 mm brass screws and pointing around urinals back in cement all as specified
Supply and fix,10 ltrs capacity PVC valve less syphonic action type, low level flushing cistern, white, with inlet, ball valve float and handle including brackets & flush pipe of polyethylene of low or high density or PVC 32 mm dia complete all as specified and directed.
Supply and fix stop valve/ angle valve, cast copper alloy, fancy type, chromium plated with long shank and cup screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.
Supply and fix stop valve cast copper alloy, fancy type, chromium plated with long shank and cup (concealed type) screwed down high pressure, with crutch or butterfly handles for 15 mm bore pipe or for unions all as specified and directed.
S&F swivel shower of brass chromium plated with long head for fixing with 15 mm pipe all as specified and directed.
Supply and fix, 15 mm bore bib taps, cast copper alloy,cromium plated, fancy type, with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified and directed.
Supply and fix, Hand Shower (Health Faucet) (Brass chromium plated) with 1 Meter Long Easy Flex Tube in Chrome Finish & Wall Hook complete all as specified and as directed.
S&F in repair 15mm bore dia brass choromium plated wall mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and directed.
S&F in repairs center hole basin mixer without pop-up waste system complete all as specified and directed. Make- Prayag or equivalent (Cat no.6750), complete all as specified and as directed.
S&F in repairs angle cock 15mm bore, two way, chromium plated, fixed to GI or steel tubing incl fittings complete all as specified and directed.
Supply and fix, as in repairs, sheet glass self assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with cromium plated bracket guard and railing 60cm long all as specified and directed.
Supply and fix, as in repair, sinks with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortor to dwarf wall or including fixing cantiriver lever brackets and connecting union to pipe overall size 915mmX460mm and bowl size 410mmX330mmX160mm all as specified and directed.Make - Nirali /Anjali/Prayag.
S&F in repairs kitchen plate rack made out of stainless steel 0.63 mm thick sheet with partitions and size of rack 800 x 250 x 900 mm with shape and pattern as per sample kept in Sample room of GE Office complete all as specified and directed. Nirali /Anjali/Prayag/Bluestar
Supply and fix,as in repair, CP 40mm dia waste coupling with inlet and out let screwed for pipe or connections including packing, union and cap etc complete all as specified and directed.
Supply and fix waste coupling CP 32 mm dia for glazed ware basins etc with fly nuts flanged etc complete all as specified and directed.
Supply and fix 32 mm dia PTMT 610 mm long waste pipe suitable for WHB complete all as specified and directed.
Supply and fix 15 mm dia 600 mm long connection pipe with two PVC PTMT nuts at each ends with rubber washer complete all as specified and directed.
Supply and fix 15 mm bore pillar tap, fancy type cast copper alloy, with single lever, chromium plated, screwed down high pressure, with or without letter Hot or Cold with long screwed shanuls and fly nuts, screwed for iron pipe or for brass ferrule all as specified and directed.
S&F Towel Ring of CP fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 90gms) complete all as specified and directed.
S&F in repair brass choromium plated towel rail 600 mm long complete all as specified and directed.
S&F bathroom mirror cabinet size of 450 x 350 mm with all necessary fittings complete all as specified and directed. Make- Prayag or equivalent (Cat no.557), complete all as specified and as directed.
Taking up or down 15 mm bore old steel tubing and connections, including disconnection of fittings from tubing including cleaning for re-fixing or removal from site complete all as specified and directed.
S&F of 15 mm bore tubes medium grade galvanised with and incl all GI fitting (such as bends, elbows, Tees, connectors, short pieces, back nuts, unions, caps and plug etc ) and fixed complete to wall and ceiling or laid in/on floor complete all as specified and directed,
S & F Toilet paper holder of brass chromium plated fixed to walls with chromium plated(CP) brass screws, complete all as specified and as directed.
S&F in repair Soap dish, any type, fixed to plugs with chromium plated brass screws complete all as specified and directed.
S&F CP grating 100mm dia all as specified and directed.
S&F PVC (SWR) floor trap ,plain with grating including jointing with solvent cement 75 mm dia complete all as specified and directed.
Supply and fix, 110mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.
Supply and fix, 75 mm bore PVC (SWR)pipe single socketed with rubber ring joints fixed to walls all as specified and directed.
S&F PVC (SWR) 110mm dia bends any radius all as specified and directed.
S&F in repairs PVC (SWR) 75 mm dia bends any radius all as specified and directed.
S&F 100 mm PVC (SWR) junction single,(Single T) equal or unequal all as specified and directed.
M&L Damp proof course 40mm thick In cement concrete 1:2:4, type B-0 to horizontal or vertical surfaces including necessary formwork, complete all as specified and as directed.
M & L for PCC 1:3:6 type C1 using 20 mm graded aggregate as in copping, holdfast,surface channel and the like including weathering, slightly rounded or chamfered angles and throating, as directed
M&L for PCC 1:2:4, Type B-I (20mm graded aggregrade) as in coping,cover slab including weathering, slightly roundedor chamfered angles and throating, as directed
S&F 18/19mm thick plywood grade A (Termite treated / water proof) ,type BB fixed with screws to timber /iron frame work as in cupboard, drwer, kitchen cabinate etc . (Make:Green Ply/Kit ply ) complete all as specified.
M&L for 0.9 mm thick decorative choice of lamination type -1 of surface finish , colour and pattern as approved fixed with adhesive or aral Dite epoxy resin Hetex or fevicol etc as per manufacturers instructions complete all as specified.
S&F in repair Stainless steel zero crank hinges (auto) fancy type (with Euro concealed hinges) fixed to shutters in cupboards of standard size and shape for modular kitchen. Complete all as directed by Engr-in-charge.
S&F in repairs Drawer side channel of std size and incl of rooler for moving drawer,mild steel bright finish,or electrogalavanised width of flap 30mm & Length 60 mm all as specified.
S&F in repairs stainless steel fancy type,bright finish handles fixed with screw,of 125mm size all as specified.
S&F SS box type for cutlery busket size 420 x 485 x 100mm fixed in kitchen cabinet complete all as specified.
S&F SS box type for cup & saucer size size 420 x 485 x 100mm fixed in kitchen cabinet complete all as specified.
S&F SS box type for thali size 420 x 485 x 200mm fixed in kitchen cabinet complete all as specified.
S&F SS box type for plain busket size 420 x 485 x 200mm fixed in kitchen cabinet complete all as specified.
S&F 12 mm thick Prelaminated particle board, exterior grade,prelaminated one side with decorative choice lamination & other side balancing white lamination,fixed with screws totimber frame work, complete all as specified.
S&F in repair 18/19 mm thick Prelaminated particle board, both side with decorative choice lamination grade -2 quality,interior grade commercial type, fixed with screws to timber frame-work, complete all as specified.
S & F Continuous (piano) hinges, 30 mm width of flap,mild steel, bright finish or lectrogalvanised, complete all as specified.
M&L 2nd class hard wood Plain fillets. square, rectangular or triangular in section, clean sawn sectionel area exc 13 sqcm but not exc 25 sqcm, secured with nails or brads, complete all as specified.
S&F 100 mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws, complete all as specified.
Taking down carefully unserviceable point wiring (light,fans,socket etc) complete incl battens and fittings such as switch, ceiling rose,light fittings, regulatos, socket etc and making good disturbed surface of wall/floor etc complete all as specified.
M & L for point wiring for one light /fan point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC casing capping with all accessories incl PVC sunken boxes of approved size for fixing switches, sockets etc and 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity complete all as specified and directed.
All as per Ser item No.126 above but for 5 amps socket on independent board.
M & L for point wiring for one light /fan/bell point with 1.5 sqmm cable PVC insulated copper conductor multi stranded as per IS-694 FRLS cable controlled by one way switch, drawn through PVC cancealed conduit with all accessories including PVC modular flush boxes of approved size for fixing switches, sockets etc and 1.5 sqmm multi strand copper conductor cable (green colour) PVC insulated and unsheathed for earth continuity complete all as specified and directed.
All as per Ser item No.128 above but for 5 amps socket on same board.
All as per Ser item No.128 above but for 5 amps socket on independent board.
All as per Ser item No.128 above but for 2.5 sqmm cable for 15 amps switch socket combination outlet on independent board
M&L for sub main wiring with four run of 6.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 6.0 Sq mm drawn through PVC Casing Caping and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length, complete all as specified and as directed.
M&L for sub main wiring with four run of 4.0 Sq. mm PVC un-sheathed, copper conductor cable, 1100 Volt, and one run of copper earth wire 4.0 Sq mm drawn through non metalic conduit and all accessories,including making good the disturbed surface by Putty and matching the colour of wall with the existing colour of the (wash/paint/distemper) wherever required(as per the existing condition), complete all as specified. Note: Copper conductor 2 run and one run of copper earth wire shall be measured as one length, complete all as specified and as directed.
S&F Modular switch 1 way, 6 Amp. 1 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F Modular switch 1 way, 15 Amp. 1 module all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F Modular bell push, 6 Amp 1 module. all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F Buzzer ding dong AC 230 V. all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F combined moduler socket 6 amps 5 pin 2 module. all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F combined moduler socket 16 amps 5 pin 2 module. all as directed/ specified. Make- Anchor/ Havells/Bajaj/ CG
S&F socket outlet, 2 in one 5 pin, 5 Amp, piano type all as directed/ specified. Make- legrand/Anchor/ Havells
S&F Ceiling rose 3 phase, PVC/ Polycarbonate body all as directed/ specified.
S & F electronic fan regulator,100W ,230V ,50Hz stepped socket type for ceiling fan complete all as specified . Make- Anchor/Leader/Standard
S&F Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 32 amps 240 Volts
S&F LED Bulb 9 watts suitable for batten fittings, complete all as specified and as directed.
Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed.: Make- Havells cat No GLOWDLR12W or equivalent in Crompton/Bajaj/Philips/Surya
S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and as directed. Make- Havells cat No HEXAFT10WLED857SSYMBOPC or equivalent in Crompton/Bajaj/Philips/Surya
Supply and Fix wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 10W 2 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make- Havells cat No LHEXACP71N1WO10 or equivalent in Crompton/Bajaj/Philips/Surya
Supply and Fix wall mounted LED batten, polycarbonate housing & integrated electronic driver. LED light fittings flicker free, instant start with uniform light distribution 20W 4 ft indoor decorative with 2 Core copper wire from ceiling rose to light fitting as per Make- Havells cat No LHEXACP7UN1WO20 or equivalent in Crompton/Bajaj/Philips/Surya. .
Supply and fixing LED Street lights not less than 25W with a single piece of pressure die cast aluminium housing and secondary optics and individual LEDs for a better light distribution and control with IP66 degree of protection and integrated driver with 10KV surge protection complete as per manufacturer's instructions all as specified and directed. Make Havells, Model No. ENDURAPEARLSL25WLED757SASYTOPC, or equivalent make in surya/bajaj/crampton/Phillips
S&F in repair TPN vertical loadline DB are fitted with Bush bar,Neutral links,blanking plates without MCCB,6 ways double door suitable for TP/FP Frame, complete all as specified and as directed.
S&F in repair TPN vertical loadline DB are fitted with Bush bar,Neutral links,blanking plates without MCCB,4 ways double door suitable for TP/FP Frame, complete all as specified and as directed.
S&F in repair MCCB 4 Pole ,415 volts fixed type ,100 amps with breaking capacity 16 ka, complete all as specified and as directed.
Supply and fixing amp rating 415V, 10KA 'C' curve miniature circuit breaker (MCB TPN 40-100 Amps) of in the MCB DB complete with connection testing and commissioning all as specified and directed.
Supply and fixing amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB SP 6-32 Amp) of single poles and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
S & F Factory made sheet metal enclosure for DBs double door (Fixed flush to the wall), SPN, 240 volt, 4 Way, IP-42 protection with 200 Amp rated bus bar and 1.5 Sq. mm copper PVC sheathed cable for earth continuity and suitable for having MCB’s complete and all disturbed surfaces of wall shall be made good to match the existing wall finishes all as specified and directed by Engineer-in-charge. make- L&T/Havells/C&S/legrand/hager.
S & F MCB DP 6 to 32 Amps, B series, 230 Volts complete all as specified and directed . Make - Standard/Havells/C&S
Supply and fixing in replacemnt of LED decorative garden post top lantern cap 20 watts with opal acryliwith IP 65 protection warm white Cylindrical LED bollard rings contemporary style and unique design toghter for indirect glare- free lighting. including making all connection using 3 core copper flexible cable drawn through in PVC conduit (if required) complete all as specified and directed by Engr-in-Charge. Make Havells, Model No. RUBYMINIPT15WLED830PSYMTOPC, or equivalent make in surya/bajaj/crampton/Phillips
M & L Earthing complete with GI earth plate electrode 60cmX60cmX6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connecting to galvanized earth wire of dia 4mm as earthing conductor and all as shown in Electrical plate No.3 of SSR Part I and including testing on completion all as specified locations and as directed by the Engineer-in-Charge. Note: 1.The above quoted rate shall include cost of main earthing lead wire of 4 mm dia, charcoal, salt, excavation and earth work in any type of soil CI cover, funnel with 20mm dia light grade GI water pipe including GI protection pipe 40mm dia light grade for earth strip etc. 2. The cost of earth pit is deemed to be included in the unit rate. 3. The cost of taking down old unsv earthing with all its accessories is deemed to be included in the unit price.
S&F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq mm 2 core including taking down old unsv cable complete all as specified and directed.
M&L for Brick Sub Class 'B' locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection complete all as specified and as directed.
Supply, lay and fix 25 mm bore galvanized iron water tubing low grade including all fittings and fixed/ laid in trenches or on poles complete all as specified and directed. Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount. Note 2-Contractor's supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor's firm name while carriying out any activities in defence area for better check of security purpose. Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)
Chinmay Traders
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .