Repairs to Circuit House at Valsad Dist.Valsad (Repairs to Manager Chamber VVIP Dining Common Toilet etc.)

Name of work :-

Repairs to Circuit House at Valsad, Dist.Valsad (Repairs to Manager Chamber, VVIP Dining, Common Toilet,

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Removing and scraping of old deteriorated plaster of any thickness 165.0 Sqmt 19.57

fromm wall / R.C.C member including stacking of serviceable material

and disposal of unserviceable from site of work with all lead and lift

2 Dismentaling tiled of stone floors laid in mortar including stacking of 305.00 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all

3 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 14.00 Nos. 405.65

European type, flushing tank etc. including stacking the materials with all

4 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 395.00 Rmt. 75.08

and clamps including stacking the materials with all lead and lift ( for any

5 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 33.00 Nos. 187.71

including chowkhats architraves, holdfasts and other attachment etc.

6 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring 26.00 Sqmt 970.07

treads of steps and landing laid on a bed of 12 mm thick cement mortar

1:3(1-cement:3-coarse sand)finishing with flush pointing in colour

7 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 78.00 Sqmt 1441.22

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed

with white cement slurry.

8 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 45.00 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost

of all materials.

9 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 90.00 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost

of all materials.

10 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 50.00 Rmt. 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

11 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 48.00 Rmt. 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

12 Providing erecting and fixing double coated (ISI) water tank of required 14000.00 Ltr. 3.95

capacity each with all necessary fittings and connection etc. complete on

13 Providing and fixing ball cock of approved. quality as directed.(A) Copper 4.00 Nos 189.84

Metal (ii) 50mm dia.

14 Providing, laying and jointing in true line and level 75 mm dia. UPVC 90.00 Rmt. 698.92

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp at every 2000 mm c/c or shall be conceled in walss as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

15 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 120.00 Rmt. 836.73

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

16 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 10.00 Nos 15.66

17 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 10.00 Nos 28.79

18 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 7.00 Nos 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

19 Providing and fixing screw down bib taps of following size.(B) Brass 7.00 Nos. 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

20 Providing and fixing brass screw down stop tap.(A) 15mm dia. 6.00 Nos 205.83

21 Providing and fixing pillar tap, capstan head, screw down high pressure 6.00 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

22 Providing and fixing wsh down water closet (European type, W.C. Pan) 6.00 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately (A) vitreous China Pattern :(i) in white

23 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of 6.00 Nos 2344.42

C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet and

24 Providing and fixing Urinal or approved quality including conecting the 2.00 Nos 1036.27

Urinal with waste pipe , tap etc. complete.(A) White earthenware flat

back or corner type size 430mm x 260mm x 350mm.

25 Providing and fixing Urinal of approved quality including connection with 1.00 Nos 1550.99

trap and with integral longitudinal flush pipe.(A) Squating plate pattern

white earthenware 550mm x 300mm.

26 Providing and fixing plastic seat and cover for wash down water closer 6.00 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

27 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm 6.00 Nos 355.52

long with wall hook and other accessories etc. completed

28 Providing and fixing wash basin with single hole for pillar tap with C.I. Or 6.00 Nos 1961.83

M.S. brackers painted white including cutting holes and making good the

same including pillar tap, Brass waste, stop cack , bottle trap and M I

fisher union fittings :(ii) Flat back wash basin 500mm x 400mm size

29 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 6.00 Nos 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

30 Removing dry or oil bound distemper by a washing and scraping and sand 427.00 Sqmt 11.30

papering the wall surface smooth including necessary repairs to scratches

31 Removing dry or oil bound distemper by a washing and scraping and sand 257.30 Sqmt 12.90

papering the ceiling surface smooth including necessary repairs to

scratches complete.

32 Applying two coats of putty & two coats of primer of approved brand and 684.30 Sqmt 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

33 Wall painting (two coats) with plastic emulsion paint of approved brand 427.00 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

34 Wall painting (two coats) with plastic emulsion paint of approved brand 257.30 Sqmt 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

35 Painting Two coats (excluding priming coat) on previously painted steel 96.00 Sqmt 94.82

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

36 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring 201.00 Sqmt 1073.13

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white

37 Providing & Fixing in position standard extruded approved colour 3.00 Sqmt 2049.29

anodised Aluminum Ventilator with outer frame 65 x 25 mm Stander Box

Frame with 5mm thick Ground Glass Louvers and Fixed Mosquito Net For

ventilation including all required materials, fixtures, fastenning, labours

and equipments as per detailed drawing as directed. For Ventilators V,V1

38 Providing and fixing 35 mm thick flush door Single shutter, solid core 9.00 Sqmt 3157.26

with Shutter of Factory made & Stamped I.S 12823 Grade one ,Type one

,melamine faced three layred resin Flushed Door Having Decorative

Lamination on both sides & 12 mm T.W.Beading Around the Door,FROM

HOLDING LICENCE FOR MINIMUM 5 YEARS .and stainless steel handle

and necessary Locking system of Godrej, zinc coated hinges ,fixtures &

fastenings etc directed by engineer in charge.D2

39 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 13.00 Sqmt 2547.22

depress panel Single shutter having extra reinforcement on sides & edges

in Gel coat finish.The core of the shutter & frame is to be filed up with

injected fire retradat grade polyurethene foam done in situ along with

embeded andwooden

Mirrorfor stiffening

18 & also taking hinges & in Single

40 Providing polished mm thick Granite stone 50.00 Sqmt 2966.37

piece with full round edge and polished of approved quality in clading on

Cill & Jambs and around the doors/ windows/ ventilation with 12 mm

thick cement motor CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by engineering in

charge etc. complete.

41 Providing 10mm thick cement plaster in single coat on brick/concrete 165.00 Sqmt 140.95

walls for interior plastering upto floor two level and finished even and

smooth in (ii) Cement mortar 1:4 (1-cement :4-sand)

42 Providing and fixing eco-friendly light weight calcium silicate false ceiling 203.00 Sqmt 1648.96

tiles having Tegular edge & 15 mm Thick Densified edges on the Tile

Periphery for Extra Strength The Light weight calcium silicate ceiling tiles

shall have , light reflection 85% non-combustible as per B.S. 476 part IV,

100% humidity resistance and also having thermal conductivity0.043°

w/m KC.for the best thermal Insulation . The Light weight calcium Silicate

tile shall be of approved texture Fine fissured / Spintone /Cosmos having

NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of

size 595 X 595 mm to be laid on true horizontal level suspended inter

locking metal grid of hot dipped galvanized steel sections (galvanizing

@120 grams per sqm including both side) consisting of main ‘T’ runner

suitably spaced at joints to get required length and size of 24X38mm

made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre,

and cross ‘T’ of size 24X28mm made out of 0.33mm (Minimum) sheet

spaced 1200mm along spaced between main ‘T’ at 600mm centre to

centre to form a grid of 1200X600mm and secondary cross ’T’ of length

600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to

be interlocked at middle of the 1200X600mm panel to form grid of size

43 Providing and fixing window having extruded aluminum Colour anodized 44.00 Sqmt 2140.33

section frame main outer size 127mm x 38.10mm x 1.35mm @wt.

1.384kg/m, horizontal Four track member size 122.20mm x 31.75mm x

1.10mm@ wt 1.205 kg/m, vertical member of size 122.20mm x 31.75mm

x 1.50mm @1.398 kg/mt with sliding shutters of horizontal member size

40mm x 18mm x 1.29mm@ 0.456kg/mt ,vertical member of size 40mm x

1.29mm @ 0.456 kg/mt with 5 mm thick transparent bronze colour tinted

float glass with powder coated aluminum fittings and fixtures and

transparent silicon sealant glass fixing to frame as per details etc

complete for window.

44 Removing, Repairing and Refixing Old existing wooden door shutter 40.00 Nos 1808.91

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

45 Providing & fixing 4 seater VIP Dining table size 1.50 x 1.50 x 0.75m made 3.00 Nos 23143.14

of 19 mm thick allproof plywood of BWR confirming to IS 710 of green or

century make, designs & grooves as directed by architectural drawings.

lamination of 1.0 mm thick in single or double shade of green, broom or

equivalent make of plain or texture finish as directed on all visible face

including on teak wood batten patti and 0.80 mm white lamination on all

non visible faces with all side decorative border upto 50mm thick for

good appereance including teakwood support & legs including with

12mm Glass at top suface and nails, fevicol, polishing on hidden surface

including labour etc as directed by Engg. in charge complete.

46 Providing and Fixing the Elegant Premium Thick Multicolor Cotton 44.00 Sqmt 492.88

window Eyelet Rings Curtain with 25 mm Stainless Steel 304 grade Poles

Pipe rod including side s.s balls 304 grade ,L clamp and other fixing

fixtures etc directed engineer in charge.

47 Providing and placing Executive Revolving full back 1.00 Nos 15097.48

chair of seat size 760 x 760 mm and back height 1175 mm from seat using

special hi-density U foam covering

with good quality of velvet at seat and back and scientifically curved back

position and PU type or SS

good quality handles. Hi-quality castor fitted Metal powder coated, five

prone made out of deep drawn CRCA sheet stand and along with good

quality of powder coated steel structure frame of required size and tilt

adjustment by concealed spring as design approved by Engineer-in-

Charge. The chair shall be of Methodax Honco HB series, Hoff or Godrej's

similar equivalent series and make or its equivalent as directed by

48 engineerin-charge

Providing & fixing etc. complete.

Computer table size 0.90 mt (W) x 1.00 Sqmt 9687.89

0.75 mt (H) made of 19 mm thick all proof plywood

including three drawers and one cabinet inclduing 1 mm

lamination in single or double shade & colour as directed

on all visible face and 0.80 mm white lamination on all

non visible faces Hettich make telescopic sliding channel,

Enox make S.S. sliding rail, S.S. Decorative handle, Ebco

make Keyboard tray with necessary fixtures & fasteners

of standard make including all labours as per instruction

of engineer etc.complete.

Rupees Sexteen Lakh Seventy Three Thousand Three Hundred Thirty Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 1673330.00 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

2 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

3 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

4 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

5 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

6 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

7 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

8 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

9 Contractor are advised to visit site before loading tender rate.

10 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

12 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

13 GST and Income tax TDS will be deducted at a source while making payments of bills.

14 GST will be paid extra as per Govt. amendment.

15 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division