Renovation Works at Intellectual Property Office at various locations i.e., Mumbai, Delhi, Chennai, Kolkata, Nagpur and Ahmedabad

Name of Work : Renovation Works at Intellectual Property Office at various locations i.e., Mumbai, Delhi, Chennai, Kolkata, Nagpur and

DETAILED SUMMARY

S.No. Sub-Head DSR Amount (in Rs.) NDSR Amount (in Rs.)

1 Civil & Interior Works 21,13,081.55 68,36,761.13

2 SANITARY FIXTURES & FITTINGS and WATER SUPPLY 22,304.25 1,36,739.04

3 Electrical/FA/PA 15,46,647.00 6,99,316.88

6 Furniture Work 0.00 84,47,496.02

Add GST Multipluing factor of 1.0633 64,30,254.43

TOTAL i/c GST 4,58,00,000.00

Digitally signed by AMIT

SINGH 15:49:02 IST

Civil & Interior Works

DSR 2021 / Amount (In Rs.)

S No. Description Unit Qty Rate

Non DSR DSR Non-DSR

1.0 DISMANTLING & DEMOLISHING

Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead :

15.13.2 Of area beyond 3 sq. metres each 12.00 155.75 1869.00

Dismantling aluminium / Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of

1.2 15.57 unserviceable surplus material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in- sqm 520.00 46.50 24180.00

1.3 1.1 Carriage of material by mechanical transport including loading unloading and stacking

1.1.1 Lime, murrum, building rubbish

TOTAL (Carried Over to Dismantling & Demolishing) 52177.00 -

2.0 WOOD & PARTITION WORKS

INSULATION- Providing and fixing thermal insulation with Resin Bonded rock wool conforming to IS: 8183, having density 48

kg/m3,50 mm thick,wrapped in 200 G Virgin Polythene Bags fixed to wall wirh screw, rawel plug & washers and held and

2.1 12.62 in position by criss cossing GI wire etc. complete as per directions of Engineer-in-Charge. SQM 150.00 277.90 41685.00

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in

2.2 9.1 position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for

9.1.1 Second class teak wood cum 5.00 1,31,576.95 657884.75

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block

2.3 9.21 board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains

or cross bands and face veneers on both faces of shutters:

9.21.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws sqm 20.00 2,015.75 40315.00

Providing and fixing aluminium extruded section body tubular type universal HS 3000 Slimline Concealed Door Closer

(having brand logo with ISi, IS : 3564,embossed on the body, door weight upto 36 kg to 80 kg and door widthfrom 701 mm

2.4 NS to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete each 10.00 7,200.01 72,000.12

TOWER BOLTS:- Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic AC 10 as per IS : 1868 ),

transparent or dyed to required colour or shade, complete:

DOOR STOPPER:- Providing and fixing bright finished brass hanging type floor door

stopper with necessary screws, etc. complete.

MORTICE LOCK AND LEVER HANDLES- Providing and installing Tubular Handle TH 123 with Roses & Escutcheon in SS

2.7 MR packaged with Mortice lockset 55mm backset, 20 SS forend, SS strike plate and EP Cylinder for all flush doors. EACH 10.00 3,250.01 32,500.05

SHELVES:- Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood

particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior

2.8 9.18 grade IS : 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane

primer (fittings to be paid separately).

Providing & fixing IInd class teak wood lipping 25 mm wide x 12 mm thick complete with all necessary nails, hardware etc.

Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality

including necessary screws etc. complete.

2.12 9.81 Providing and fixing bright finished brass handles with screws etc. complete:

Digitally signed by AMIT

SINGH 15:49:02 IST

SHUTTERS:- Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board

or graded wood particle board IS:12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination

2.13 9.129 and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary SQM 4.00 1982.70 7930.80

screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge

STORAGE CABINET FOR ELECTRICAL PANEL AND VOLTAGE STABLIZERS- Cabinet Shutters out of 19mm Commercial Plybaord

finished in 1mm Laminate of base cost Rs. 380 per sqmt. Shutters to be fixed to a frame. Rigidly fixed on both sides and top

finshed in laminate. No internal carcass required. All Hinges of hettich or equivalent. Internal Surface of the shutter in

2.14 MR balancing white laminate. All shutters to be provided with Stainless steel louvers at the top and bottom of the shutter as SQM 4.00 2860.00 11,440.02

per the site requirements and instrcution of the Engineer In charge.

TOTAL (Carried Over to Wood Works) ₹ 7,84,332.55 ₹ 1,23,540.21

ENGINEERED WOODEN FLOORING Panel 1820x145 Total thickness 13mm Numbers of panels per pack 6 Nested Lengths

Max. 1 plank out of 6 m2 per pack 1,583 m2 Kg per pack 11,99 kg Toplayer PEFC controlled sources EN 13489 ± 3 mm Core

board PEFC controlled sources Spruce Backing layer PEFC controlled sources Wood Veneer 2 mm Tongue and groove

Length Uniclic Width Uniclic Multifit Domestic use Conditions in each pack 33 years Uniclic - Multifit connection Lifetime

Commercial On request "Wood for Life" Edge Protect + Provides a warranty on build-up of residue dirt along the edges

due to maintenance over the years 10 years "Wood for Life" Surface & Edge Protect + (lacquered products only) Provides

a warranty on pollution of surface structure and a warranty on build-up residue dirt along the edges due to maintenance

over the years 10 years Surface layer Wood species Oak Origin Europe Finishing UV cured Oiled finish 2 layers UV cured

Lacquer Anti-scratch top coat 5 - 7 layers Natural variance Due to nature, visual surface can deviate from samples

Surface treatments cf catalogue/website Nature Marquant Vibrant General aspect of installed EN 13489 Lipping -

difference in height (mm) ≤ 0,20 difference in width (mm) ≤ 0,20 cupping lengthwise % ≤ 0,1 cupping in width % ≤ 0,2

Dimensional stability ISO 24339 Cupping short side max % ≤ 0,30 Changes 30 - 85 % RH Cupping short side min % ≥ - 0,20

Open joints short side (mm) ≤ 0,20 Open joints long side (mm) ≤ 0,30 Underfloor heating Suitable of special installation

instructions.or its equivalent

Providing and Fixing of floor tiles with wear layer is of 0.5mm, made upof Stone Polymer composite, 100% Water & Termite

3.2 MR proof, Scratch/ Flame/ UV resistant, anti-microbial, 100% recyclable Green product having click system with suitable SQM 5.00 3880.01 19400.03

skirting. Classification of abrasion resistance (Abrasion wheelfromH-18 Calibrade, loadApplied 1000 grams, No. of Cycles

14,400). " ( Along with Matching Profiles)

Providing & Fixing of Flocked textile floor covering of Nylon 6.6 face fiber or equivalent of approved make with 100%

Nylon and completely water proof resilient backing. The flooring should be Anti static with thickness of 4.3 mm and

approximate weight of 1.8 k.g./sqm of roll form. The carpet should be completely stain resistant and of a density approx.

80 million fibers/sq.mtr (70 million fiber/sq.yd) in the width of 2 mtr .The floor covering should have Fire Test EN-13501,

3.3 NS Appearance Retention Hexapod ISO 140-8, Friction Slip Resistance Test EN 14041 Class DS, SANITISED anti-microbial sqm 499.87 3,700.01 18,49,523.43

treatment, with resilient waterproof backing, anti allergic which is certified by British allergy foundation, with ten year

replacement guarantee. The carpet should have permanent static control & should be fixed with powder coated

aluminum angles as per detail. Aluminum angles to be paid separately.

3.4 NS Aluminium skirting

Providing and fixing Aluminium Skirting 100 mm ht - Groove skirting - Natural Anodized Finish (Make- as per make list or

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less

than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in

3.6 11.46 skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement

slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments

roviding and fixing 12mm thick frameless toughened glass door shutter of approved brand and manufacture, including

providing and fixing top & bottom pivot & double acting hydraulic floor spring

3.7 21.18 type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of sqm 10.00 4,540.70 45,407.00

Engineer in charge (Door handle, lock and stopper etc. to be paid separately)

TOTAL (Carried Over to Flooring Works) ₹ 74,737.00 ₹ 28,35,175.63

Digitally signed by AMIT

SINGH 15:49:02 IST

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections,

power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and

consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to

centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of

cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of

angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to

which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5

mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting

clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick

27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl

4.1 12.45 plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling

section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and

finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes

, finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable

for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills,

diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and

direction of the Engineer in Charge but excluding the cost of painting with :

12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks)

WOODEN CEILING :- Providing and fixing wooden 12mm Underlay commercial Ply fixed to a subframe made using 50mm

X 50mm Kiln seasoned and chmeically treated hollock wood fixed to RCC ceiilng using Fastners . The cost to inlcude the

4.2 finishing of the Veneer using wood stain and clear coat of PU (Gloss/ Matt) as per the instructions of the Engineer In SQM 80.00 5550.01 4,44,000.75

CEILING PELMETS :- Providing and fixed pelmet of overall size 150mmx150mm and made hardwood framings hung from

4.3 MR ceiling @1000mm centre to centre with 1 nos of 12mm thk. fire retardant ply on vertical & 12mm thk. Commercial ply on RMT 60.00 960.00 57600.10

horizontal surface (straight & curved). Inclusive of finishing in Paint.

Providing the gypsum double sided cove of 150mm x 150mm having a facia of 75mm to macth the specifications same

Providing the wooden cove of 150mm x 150mm having a facia of 75mm to macth the specifications same as above.

GYPSUM BOARD VERTICAL BAND- upto100mm high gypsum band all round the mineral fibre/ gypsum ceiling. In order to

4.6 MR make the Mineral Fiber/ gypsum ceiling higher than the Gypsum Ceiling by upto 100mm as per drawings. (visible surface RMT 120.00 395.00 47400.08

of gypsum band to not exceed 100mm) including plastic emulsion paint.

4.7 MR Strech Ceiling Providing & fixing Plain Translucent Stretch fabric with lighting arrangment as per Direction of incharege SQM 60.00 16,500.03

TOTAL (Carried Over to Ceiling Works) ₹ 7,44,867.50 ₹ 17,10,002.88

5.0 FINISHING WORKS

5.1 13.4 12 mm cement plaster of mix :

Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and

smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content

5.3 13.83 less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to

achieve even shade and colour.

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound )

13.85.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 50 grams/ litre sqm 650.00 61.45 39,942.50

Digitally signed by AMIT

SINGH 15:49:02 IST

WALL PANELING :-Providing and fixing Paneling upto ceiling height consisting of Aluminium frame and required board,

frame work made of Aluminium section made of 50x25 mm , consisting of floor and ceiling channel 50mm wide having

equal flanges of 25 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with

dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the

studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges

of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including

fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs

at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on

5.5 MR studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work

with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5

mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws,

including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at

corners (25 mm x 25 mm x 0.5 mm), joint finisher as per manufacture's specification and direction of engineer in charge all

complete.(Cost of Aluminium framing 600X600mm Paid saperately)

Paneling with 12 mm thick HDHMR board to IS: 5509 SQM 450.00 2,250.00 10,12,501.71

Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high

5.6 9.127 density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including

cost of adhesive of approved quality.

Acoustic wall panel work for insulation .

Providing of linear and horizontal grooved acoustic wall panels with 12 mm thick board panelling having sound

5.7 absorption property on walls over existing surface. The panels are made of fibreboard of density about 780 kg/m3 with SQM 150.00 4,927.00 7,39,050.00

low formaldehyde content. (Make : As per approved makelist)

TOTAL (Carried Over to Finishing Works) ₹ 4,56,967.50 ₹ 17,51,551.71

6.0 MISCELLANEOUS WORKS

KITCHEN/ PANTRY/ HAND WASH COUNTER :- Providing and fixing pantry and toilets with Granite stone top (with straight

edge polished nosing) complete with base cabinet made of 20mm BWP board, outside surface (shutters) finished in 1mm

thick Laminate of approved shade. All internal surfaces to have balancing laminate. The rate inclusive of necessary

6.1 MR hardware, handle lock sets, self closing hinges, spring loaded shutter, latch inside, all cabinet hardware complete as per RMT 5.00 14550.02 72750.12

Archnter itects approval. The height of the Conter is to be upto 900mm and Width of work top counter 600mm/ as per the

detailed drawings.

BLINDS Providing & supplying of Window Blinds as per the approved sample in required shade and style consisting, of

Roller Blinds comprising of optima screen Fabric comprising of 22% polyester, 78% PVC, Fabric weight 460-480G weight per

sq m, Thickness 0.67 mm, Yarn count 18-19/cm, having fire resistance standard – NFPA 701-89 small testing ISO-5659-2

.Thetear resistance should be complying to ISO4674 & breaking resistance – ISO 5081. The DRIVE UNIT shall be of clutch for

quick, easy and safe installation, moulded plastic with steel spring support and inserted into the tube end. It shall be

driven by a ball chain pulley with ball chain and can be positioned at right side or left hand side of the Shade. The Shade

when lowering or raising, shall be automatically locked in position upon release of the ball chain by means of a built in

friction lock.Universal clutch for left and right hand operation.Chain Gear Ratio of 1.75:1. The END PLUG shall be molded

of plastic witha steel location pin.The plug shall be inserted into the tube end.(Opposite to the Drive Unit) for ease of

6.2 M.R. installation. The SUPPORT BRACKETS shall be of coated steel & provided with covers and used in right hand or left hand SQM 100.00 2623.00 262300.44

positions differentiated by the acceptance of the of the rectangular drive unit support or the round idler plug pin.Can

beinstalled (a) On Face (b) Ceiling Mount (c) On Frame (d) in Recess. The Bracket should be protruding outside maximum

of 80mm.The ROLLER TUBE shall be of extruded aluminum with 37mm internal diameter & skin thickness of 1mm and shall

incorporate a key way integral with the tube to accommodate the spline. The BOTTOM RAIL shall be a Flat Bottom made

up of powder coated steel. The BALL CHAIN shall be 2mm diameter cord with 4.5mm diameter acetal balls moulded co-

axially to it on 6mm pitch to form an endless ball chain. It is used for raising or lowering action of the shades.

FROSTEDFILM(CRYSTALQUALITY):-Providing and fixing scotchcal over glass surface as approval of the Architect. (Only film

surface area shall be measured and paid).

Providing and Fixing Logo & Signage in 3D ,as per the approved Design/ pattern with Mat /Gloss Finish Brass Letters with

Mettalic/ Acrylic Base, complete as required at site with the direction of the Enginner In Charge

TOTAL (Carried Over to Miscellaneous Works) ₹ - ₹ 4,16,490.70

Digitally signed by AMIT

SINGH 15:49:02 IST

SANITARY FIXTURES & FITTINGS and WATER SUPPLY

SL. NO. DESCRIPTION OF ITEMS UNIT Qty NS Rate (Rs.) DSR Amount (Rs) NS Amount (Rs)

Providing & fixing glazed vitreous china single trap syphonic

pattern having back inlet ,supporting chair ,wall hung water

closet with cistern complete with all internal

fittings/accessories and CP brass flush bend (European type)

water closet with seat and lid, with C.P. brass hinges and

1.1 NS rubber buffers, adapter, rubber joints fixed to W.C., C.P. brass

screwed washers including cutting and making good the

walls and floors wherever required and HDPE wc pan

connector including jointing with white cement coomplete in

Wall hung W.C. pan (White colour)with white plastic seat & lid

"Thermoset moulded ( bakelite ) IS 2548 Part I

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 23,196.86 23,196.86

Providing & fixing glazed vitreous china wash basin with R.S.

or C.I. brackets painted white, 32mm C.P. brass waste of

standard pattern , C.P brass wall flange 32 mm dia. C.P. brass

bottle trap and union 32 mm dia C.P. pipes to wall flange.

complete including cutting and making good the walls

wherever required.

1.2.1 Undercounter wash basin (White colour)of size: 585x430 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 8,077.69 8,077.69

1.2.2 NS Table top wash basin (white colour)of size: 440x440 mm

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 9,998.51 9,998.51

Providing & fixing 15mm C.P. brass single hole wash basin

1.3 NS mixer without popup waste system with 450mm long copper

pipes and brass nut

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 4,253.69 4,253.69

SINGH 15:49:02 IST

1.4 NS Providing & fixing vitreous chinaware urinal comprising

Large flat back wall hung urinal in glazed vitreous China new

NS magnum urinal

15 mm electrically operated solenoid valve with infra red

sensor mounted in a box with SS Cover.

CP brass chromium plated flush piping from solenoid valve to

urinal terminated with a 15 mm screwed spreader

32 mm nominal bore CP cast brass waste

32 mm nominal bore CP cast bottle trap with extension pipe

rubber adopter for waste connection, CP brass wall flange.

For supply,installation,testing & commissioning of sanitary

fixtures(white colour) as per above details. Each 1 28,081.79 28,081.79

Providing & fixing stainless steel sink R.S. or C.I. brackets

painted, 40mm C.P. waste, C.P. brass chain and rubber plug,

1.5 NS 40mm C.P. cast brass bottle with necessary union complete

including cutting and making good the walls wherever

Stainless steel sink single bowl with drain board(size

510x1040mm) of approved

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 12,447.61 12,447.61

Providing & fixing Sink Mixer with Swinging Casted Spout (Wall

1.6 NS Mounted Model) with 450mm long Copper Pipes & Brass

Nuts.CP brass wall flange

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 5,077.71 5,077.71

Providing & fixing toilet paper holding including cutting and

1.7 NS making good the walls.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 1,983.09 1,983.09

Providing & fixing Horizontal liquid soap dispenser with

1.8 NS stainless steel lid and brackets fixed to wooden cleats with

C.P. brass screws.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 3,549.71 3,549.71

SINGH 15:49:02 IST

Providing & fixing C.P. brass coat hooks fixed on toilet door

1.9 NS with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 605.14 605.14

Providing & fixing beveled edge mirror 5.5mm thick of

superior quality plate glass complete with 6mm thick marine

1.10 NS ply sheet ground fixed to wooden cleats with CP brass

screws and washerswith 40 mm wide teak wood frame as per

design including polishing

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Sqm 2 2,471.90 4,943.80

1.11 NS Providing & fixing Hand Shower (Health Faucet) with 8mm

dia, 1M long PVC tube and wall hook CP brass wall flange

For supply of sanitary fixtures as per above details Each 1 1,730.53 1,730.53

Providing & fixing, testing and commissioning of storage type

electric water heater with automatic thermostatic control

electric element, pressure release valve, brackets fixed to

expansion fasteners with M.S. nuts and bolts all complete

including cutting and making good the walls wherever

25 litres capacity (Horizontal /Vertical type1.5 kw electrical

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 18,849.31 18,849.31

Providing & fixing wall mounted 25 mm dia Stainless steel

1.13 NS coated grab bar including cutting & making good the

walls(size 450mm long)

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 1,017.06 1,017.06

Providing & fixing 15 mm dia C.P. brass bib cock with Hose

union of approved quality.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 1,376.24 1,376.24

SINGH 15:49:02 IST

Providing & fixing 15 mm dia C.P. brass bib cock with C.P.

wall flange of approved quality.

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 1,556.25 1,556.25

FRAGRANCE DISPENSER MACHINE :-Providing and fixing of

Fragrance Dispenser machine complete with refill can and

'C' size battery (2 Nos) for operation fixed to wooden cleats

with CP brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 4,492.65 4,492.65

Providing and fixing of stainless steel finish Paper Towel

1.17 NS Dispenser having capacity of 300-350 paper towels fixed to

wooden cleats with C.P. brass screws

For supply,installation,testing & commissioning of sanitary

fixtures as per above details. Each 1 5,501.40 5,501.40

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot & cold water supply

including all (CPVC) plain & brass threaded fittings including

fixing the pipe with clamps at 1.00 m spacing. This including

jointing of pipes & fittings with one step CPVC solvent cement

and testing of joints complete as per direction of engineer in

Internal Work - Exposed on Wall

1.1 18.7.2 20 mm nominal outer dia pipes. Metre 20.00 325.10 6502.00

1.2 18.7.3 25 mm nominal outer dia pipes. Metre 20.00 408.55 8171.00

Providing and fixing Chlorinate Polyvinyl Chloride (CPVC)

pipes having thermal stability for hot & cold water supply

including all CPVC plain & brass threaded fittings i/c fixing

the pipe with clamps at 1.00 m spacing. This including jointing

2 18.8 of pipes & fittings with one step CPVC solvent cement and

the cost of cutting chases and making good the the same

including testing of joints complete as per direction of

engineer in charge.

SINGH 15:49:02 IST

Concealed work oncluding cutting chases and making good

18.8.2 20 mm nominal outer dia pipes. Metre 10.00 513.75 5137.50

Providing and fixing brass stop cock of approved quality

Providing and fixing gun metal gate valve with C.I. wheel of

approved quality (screwed end):

Providing and fixing unplasticised P.V.C connection pipe with

5 18.74 PTMT Nuts coller and bush of approved quality and colour.

18.74.2 15mm nominal bore with 45cm length Each 1.00 107.90 107.90

Sub-Total of Water Supply Installation, Separate for Scheduled & Non-Scheduled Items 22304.25 136739.04

SINGH 15:49:02 IST

Electrical/FA/PA

DSR-2022 Description

S.No No. Unit Qty Rate DSR Amount MR Amount

1.0 DISTRIBUTION BOARDS.

2.4 Supplying and fixing following way, horizontal type three pole

and neutral, sheet steel, MCB distribution board, 415 V, on

surface/ recess, complete with tinned copper bus bar, neutral

bus bar, earth bar, din bar, interconnections, powder painted

including earthing etc. as required. (But without

MCB/RCCB/Isolator)

2.10 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C"

curve, miniature circuit breaker suitable for inductive load of

following poles in the existing MCB DB complete with

connections, testing and commissioning etc. as required.

2.15 Supplying and fixing following rating, four pole, (three phase

and neutral), 415 volts, residual current circuit breaker (RCCB),

1.4 having a sensitivity current 30 mA in the existing MCB DB

complete with connections, testing and commissioning etc. as

Total of Main Panel/ DB carried over to summary 1,10,117.00 0.00

2.0 CABELS / MAINS

Supply ,laying,testing and commissoning of 1100V grade armoured cable having sector /

circular shaped aluminium / copper conductor PVC insulated cores under ground PVC

tape wrapped inner sheathed, GI strip / wire armoured and overall extruded PVC sheathed

confirming to IS: 1554, laid on wall or ceiling using GI clamps and spacers as per route shown

at site and further as directed by Engineer-in charge

2.1 MR 16 Sq.mm 4 core copper cable mtr. 100.00 825.00 82,500.00

Total of Cables / Mains carried over to summary 0.00 82,500.00

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC

insulated copper conductor single core cable in surface / recessed medium class PVC

4.1 1.10 conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5

sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.

Digitally signed by AMIT

SINGH 15:49:02 IST

a 1.10.3 One light point controlled by one 6A switch Per Pts 75.00 1,467.00 1,10,025.00

iring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point

(without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper

4.2 1.54 conductor single core cable in surface/ recessed steel conduit, and earthing the point with

1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC

4.3 1.7 insulated copper conductor, single core cable in surface/ recessed steel conduit as

a 1.7.1 2x1.5sqmm+1x1.5sqmmearth wire 200.00 327.00 65,400.00

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire Per

2 X 4 sq. mm + 1 X 4 sq. mm earth wire Per

Wiring for twin control point wiring using 1.5 sqmm copper conductor FRLS PVC insulated

copper conductor cable drawn through 25 dia MS conduit laid in surface/concealed over

4.4 1.4 false ceiling or in slab/wall chases including ,2way modular switches,modular plate ,suitable Per Pts 30.00 1,981.00 59,430.00

GI box and earthing the point with 1.5 sqm FRLS PVC insulated copper conductor single core

cable as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

c 1.24.4 3 pin 5/6 A socket outlet Each 60.00 122.00 7,320.00

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate

for modular switches in recess etc. as required.

Supplying and fixing following Modular base & cover plate on existing modular metal boxes

etc. as required.

Supplying and drawing co-axial TV cable RG-6 grade, 0.7 mm solid copper conductor PE

4.8 1.19 insulated, shielded with fine tinned copper braid and protected with PVC sheath in the Meter 20.00 47.00 940.00

existing surface/ recessed steel/ PVC conduit as required.

Supplying and laying HDMI Cable with connector on both ends upto 15m length or as per

site requirement

Total of Wiring carried over to summary 7,39,836.00 42,918.21

Digitally signed by AMIT

SINGH 15:49:02 IST

5 LIGHTING FIXTURES

5.1 MR LINEAR LIGHT 28-36W as per the specifications and direction of Engineer In-charge RMT 40.00 3,454.00 1,38,160.00

Supply, Installation, Testing and Commisioning of pre-wired round shape

Surface Mount 15Watt LED Down Lighter fitting complete with all accessories,

housing made of Aluminium Die-cast, System Efficasy >100 LPW, CRI >80, CCT

of 4000K. suitable for 220 V, 50 Hz, The luminare rated life (L70) >50000 Hours

with High efficiency driver with inbuild surge protection, over voltage 1,02,963.40

protection, short circuit protection and operating at >0.95 PF., BIS approved

Driver including connection with 1.5 sq. mm FR PVC insulated, copper

conductor, single core cable and earthing etc as required.

Supply, Installation, testing and Commisioning of 1.2 mtr 4 feet long Batten

light Cove Light: Supply of natural white 3000/4000K/6500K Luminaire) and

5.3 MR system efficiancy better than 100 LPW, Low Voltage 12VDC system, with Nos 30.00 850.00 25,500.00

Thermo-conductive adhesive complete etc. as required.

Total of Light Fixture carried over to summary 0.00 2,66,623.41

6 WIRING FOR DATA AND VOICE OUTLETS

Supply and fixing the following sizes of PVC medium duty ISI marked conduits (IS : 9537 Part-

III) complete with accessories such as bends, junction boxes, pull boxes etc., in recess or on

surface including cutting chases in the walls/floors and making good the same complete as

Supplying and drawing of CAT 6A U/UTP cable, white jacket, 4 pair LAN Cable in the existing

surface/ recessed Steel/ PVC conduit as required.

Supply & fixing of Plug in type information outlet (campatible with data cables) in existing

faceplate/ GI Box in wall/furniture/floor complete as required.

Supplying and fixing following modular switch/ socket on the existing modular plate & switch

box including connections but excluding modular plate etc. as required.

1.24.6 Telephone socket outlet Each 20.00 148.00 2,960.00

6.5 Supply and fixing of the following types Face Plates complete with all accessories.

Supply & Fixing of Dual Faceplate, Duplex Port (for data and for voice) or as required

a. MR square plate having spring shuttered front access for preventing ingress of dust, dimension as Nos. 40.00 90.04 3,601.58

per commercially available modular office furniture.

Supply ,laying ,installing , testing and commmissioning of the 50 pair multi core 0.61 mm

annealed copper conductor PVC insulated and PVC sheathed armoured telephone cables

6.6 MR generally conforming to ITD S/WS-11-C and IS 1554 part I direct in ground /surface and / or in mtr. 50.00 457.57 22,878.28

existing pipe as required and includig making terminal joints, complete as required.

Digitally signed by AMIT

SINGH 15:49:02 IST

Supplying, installing, testing and commissioning of 24 port Cat 6A patch panels available

with block of four equipped with tool less IO, Rack Mountable. 19" Modular Patch Panel,

loaded CAT6A U/UTP 24 port LCS2 rack mountable to be compatible in 4nos of 6 X RJ 45 Tool

less connector U/UTP unit in a block.

Total of Data & Voice carried over to summary 1,82,212.00 1,71,043.69

7 CABLE TRAY.& RACE WAY.

4.1 upplying and installing following size of perforated painted

with powder coating M.S. cable trays with perforation not more

7.1 than 17.5%, in convenient sections, joined with connectors,

suspended from the ceiling with M.S. suspenders including bolts

& nuts, painting suspenders etc as required.

7.2 GI Raceway & Junction boxes ( Raceway on floor shall be of aluminium only)

MR Providing and fixing 2 mm thick steel sheet factory fabricated post galvanized raceway with

internal partition/compartmentized of the following sizes including providing removable 3

mm thick GI cover, knock out holes and fixing accessories earthing with 8 SWG copper earth

wire complete as required including floor supports, bends, access boxes, tap off boxes and

cross over as per specification and site requirement. (overhead / wall mounted recovery &

function boxes shall be 1.6 mm thick)

a) MR 300 mm wide x 38 mm deep raceway or as per site RM 5.00 2,506.51 12,532.54

b) MR 225 mm wide x 38 mm deep raceway or as per site RM 5.00 2,110.90 10,554.48

c) MR 150 mm wide x 38 mm deep raceway or as per site RM 25.00 1,603.10 40,077.51

d) MR 100 mm wide x 38 mm deep raceway or as per site RM 25.00 1,159.48 28,986.94

MR Providing and fixing 350 x 350 x 60 mm deep 2 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

MR Providing and fixing 150 x 150 x 60 mm deep 1.6 mm thick GI sheet junction box including

providing 3 mm thick stainless steel cover as per specification.

Total of Raceway carried over to summary 1,35,750.00 1,36,231.57

A. SITC OF FIRE ALARM SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of intelligent analog addressable Pcs 24 2858.00

photothermal detector complete with mounting base complete as required.

Supplying, installation, testing & commissioning of addressable manual call point complete Pcs 7 3871.00

Supplying, installation, testing & commissioning of addressable horn cum strobe complete as Pcs 7 3506.00

Supplying, installation, testing & commissioning of fault isolator complete with base as Pcs 7 3270.00

Supplying, installation, testing & commissioning of response indicator on surface/recessed Pcs 7 276.00

5 17.2.5 MS Box having two LED, metallic cover complete with all connections etc as required. 1932.00

B CABLES & ACCESSORIES FOR FAS :

Digitally signed by AMIT

SINGH 15:49:02 IST

Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, RM 300 173.00

600/1000V rated with annealed copper conductor having

XLPE insulation, steel wire armouring & FRLS outer sheath

complete as required.

C SITC OF PUBLIC ADDRESSABLE SYSTEM & ACCESSORIES :

Supplying, installation, testing & commissioning of Pcs 25 2428.00

7 17.3.4 ceiling/wall mounted loud speaker, 3/1.5 Watt in ABS 60700.00

enclosure complete as required.

D CABLE & ACCESSORIES FOR PA SYSTEM

Supplying and drawing of cable Fire Retardant PVC insulated

copper conductor cable in the existing surface / recessed

steel conduit of following pairs, cores and size including

connections and interconnections etc. as required..

8 17.5.3.1 speaker cable Single pair, 2-core, 1.5 sqmm RM 450 54.00 24300.00

Supplying, installation, testing & commissioning of digital Each 1 96779.00

9 17.3.6 audio amplifier 50 Watt, 25V rms operating at 240 volt AC 96779.00

supply complete as required.

TOTAL for Fire Alarm System and Accessories Rs. 378732.00 0.00

Grand Total for Electrical/FA/PA 15,46,647.00 6,99,316.88

Grand Total for Electrical/FA/PA 15,46,647.00 6,99,316.88

Digitally signed by AMIT

SINGH 15:49:02 IST

1.0 VRF/VRV OUTDOOR UNIT Unit Quantity Rate DSR Amount NDSR Amount

Supply Installation, Testing & Commissioning of modular type Variable Refrigerant

Flow/ Variable Refrigerant Volume air cooled Outdoor units suitable for cooling and

heating, having all hermetically sealed inverter type Scroll Compressor(s), minimum

two compressors for above 14 HP modules, microprocessor based Controller, top

discharge type condensing unit(s), with R410A Refrigerant, vibration isolators, with

1.0 1.1 suitable foundation etc. complete as required.The unit shall deliver the rated Per HP 60 16415 9,84,900.00

capacity at AHRI Conditions and work even at 50°C ambient temperature without

tripping.The unit shall be suitable to work on 400V+/-10%, 3 Phase, 50Hz AC power

supply.The unit shall be filled with first charge of the refrigerant and ready for use as

required.The COP at AHRI conditions shall not be less than 3.1 and IEER not less than

2.0 INDOOR UNIT

Supply, installation, testing and commissioning of following minimum capacity 4-

wayflow VRV/ VRF Cassette Type Indoor ceiling mounted unit equipped with

synthetic washable media pre-filter, fan section with low noise fan/ dynamically

balanced blower, multi speed motor, coil section with DX Copper coil, electronic

expansion valve, outer cabinet, drain pump, grill, necessary supports, vibration

isolation, cordless remote control etc., suitable for operation on single phase

230V±10%, 50 HzAC supply, complete, as required. The unit shall have automatic

force shut down provision in case of fire on receiving signal from BMS System. The

cooling capacity of indoor unit will be at air inl et conditions of 27 Degree CD Band

19 Degree CWB temperature.

4-Way Cassette type

3.0 REFRIGERANT PIPING

Supply, Installation, testing and commissioning including

vaccumiazation and Nitrogen testing of following nominal sizes of soft/hard drawn

DSR 2019 copper refrigerant piping for VRV/VRF system, complete with fittings, with suitable

3.0 VRF/VRV Item adjustable ring type hanger supports, jointing/brazing including accessories,

No 5 insulated with XPLE Class-O tubular insulation/with Class-O closed cell elastometric

nitrile rubber tubular sleeves sections of specified thickness as given below for

Suction and Liquid lines, all accessories as per specifications etc. as required :

6.4 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

9.5 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

12.7 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

15.86 mm dia (OD) (Soft drawn) with tube thickness 1.2 mm with 19 mm thick insulation

Digitally signed by AMIT

SINGH 15:49:02 IST

22.2 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

28.58 mm dia (OD) (Hard drawn) with tube thickness 1.2 mm with 19 mm thick insulation

34.9 mm dia (OD) (Hard drawn) with tube thickness 1.62 mm with 19 mm thick insulation

4 CONDENSATE DRAIN UPVC PIPE

Supply, installation, testing and commissioning of uPVC Pipe ,complete with fittings,

supports,U trap arrangement,Clean Plug with 6mm nitrile insulation and accessories

as per specifications, drawings.

4.3 MR Imported fittings Y-joints and headers etc. Nos 12 4281 51376.89259

Providing and fixing control cum transmission wiring of 2 core x 1.0 sq. mm copper in

suitable conduits between indoor and outdoor unit.

Digitally signed by AMIT

SINGH 15:49:02 IST

Sr. No. Item Description Unit Qty Rate DSR Amount Amount

SITC of 98" Intractive LED display panel brigtness 500 nits , Display with all HDMI input, USB, VGA, audio input/output control, RJ-45 Ethernet Port,

1 inbuilt speaker etc and necessary accessories complete etc. as reqd. The number of ports of HDMI,VGA ,USB etc WITH Inbuilt wireless Nos 4 15,10,403.69 60,41,614.76

SITC of 86" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution , Display with all HDMI input, USB, VGA, audio input/output control,

2 RJ-45 Ethernet Port, inbuilt speaker etc and necessary accessories complete etc. as reqd. The number of ports of HDMI,VGA ,USB etc WITH Inbuilt Nos 2 3,85,650.94 7,71,301.88

wireless colobration.

SITC of 65" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution, , Contrast Ratio: 4000:1, Viewing angle (horizontal / vertical): 178 /

3 178 degree, Panel technology: IPS / Direct LED, Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, Audio In, Audio Out, Control: RS232, Ethernet, Nos 1 1,25,650.31 1,25,650.31

2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all complete

SITC of 55" Professional Ultra HD Display Panel, 4K UHD (3840x2160) Resolution, , Contrast Ratio: 4000:1, Viewing angle (horizontal / vertical): 178 /

4 178 degree, Panel technology: IPS / Direct LED, Connectivity: Video Input: 2 HDMI 2.0, 2 USB 2.0, Audio In, Audio Out, Control: RS232, Ethernet, Nos 8 1,05,000.26 8,40,002.05

2x10W Built-in speakers, CE, FCC, Class A, BIS Certified etc all complete

5 SITC of Fixed Wall Mount, capable of holding up to 75 kg and supports 37" to 98" displays, VESA Compliant etc all complete Nos 15 10,500.03 1,57,500.38

SITC of of Control Stand-alone web-based control processor with the latest ReAX engine,IP Control Engine, Web Server, FTP, Browser,1 LAN port

with PoE,Bidirectional RS-232 (Serial) x 1 No,IR / 1-way Serial Ports x 2 No, I/O with A/D x 2 No, SPDT Relays x 2 No, IR Receiver x 1 No, Should have

6 Real-Time Clock, Should support TCP-IP Client / Server, telnet for 3rd party devices that can be controlled on LAN, Should have Inbuilt IR Learner, Nos 6 1,25,650.31 7,53,901.84

support customized Webpages loading on the same processor & can be browsed from a PC for control / Monitoring purpose, any license

required for control iPad / Android pad, should be included into this line item itself complete required as per specifications.

7 SITC of f Apple iPad 10.2 WiFi,Tablet (iPadOS 12 or above, Apple A13 or above Bionic Chip, 25.91cm (10.2 inches), 64GB ROM, ) Nos 6 62,720.15 3,76,320.92

SITC of Next Generation Wireless Technology, Dual Band Performance, Up to 300Mbps (2.4GHz) + 433Mbps (5GHz) to deliver fast wireless speeds

8 and less interference for maximum throughput, High-Gain, Antennas, 3 high-gain antennas deliver maximum range around your home, Nos 6 13,500.03 81,000.20

Backward Compatibility, Compatible with a/g/n devices, Wired Connectivity, Four 10/100 Fast Ethernet ports for fast device connectivity

SITC of state-of-the-art ceiling microphone with speech reinforcement* and recording solution. Attaching and positioning lavalier microphones

is time-consuming, and handheld microphones restrict movement. However, the Beamforming Microphone is simply affixed to the ceiling, then

9 ready to use – leaving the orator location-free, hassle-free and hands-free to focus on presenting. Cable requirements Cat5e UTP or higher, Nos 1 2,25,500.55 2,25,500.55

Frequency response100-10,000 Hz *, Maximum SPL 94dBSPL, Signal to noiseratio75dB (A-weighted, 1kHz, 1Pa),Latency Under 24ms (Not including

Dante latency), Channel count: 2 channels(Main, Rec) withDante Sampling rate: 48 kHz Bit depth: 24 Audio interface: Dante, AES67.

SITC of Digital Signal Processor, 8 balanced microphone or line level inputs, 8 balanced line level outputs, Dante audio interfaces, Supports

adaptive echo cancellation (AEC), adaptive feedback control (AFC), automatic gain control (AGC), automatic mixture control (AMC),

automatic noise suppression (ANS), Each input supports 12-band parametric equalizer (PEQ), signal generator, compressor, expander, ducker,

and 48 V phantom power, Built-in USB sound card for recording and playing digital audio etc all complete

SITC of Fully Digital Networked DSP Conference Processor for boundary microphone having digital ring network technology achieves full-digital

signal transmission and processing, High-fidelity sound quality, lossless audio transmission technology, 48K audio sampling frequency, 20Hz ~

20KHz response frequency, All microphone units support audio, and ID independent output. Working with a voice recognition system to achieve

voice role separation, sensitivity of the unit microphone and 8-segment equalizer EQ was adjusted independently, Support AGC (Automatic

11 Gain Control)/AFC (Adaptive Feedback Cancellation)/ANC (Acoustics Noise Cancellation) Sound output by separated zones function, each Nos 6 2,20,650.54 13,23,903.24

zone is automatically adjusted according to the volume of the position of the microphone, achieve longer distances pickup without a whistle,

Echo cancellation, remote two-way real-time call with another conference controller or another third-party video conferencing termina, USB

recording, controller monitor, advanced noise cancellation technology to realize clearer recording, Optional DANTE output module with other

DANTE equipment used, Controller should have Camera Tracking Protocol: PELCO-P/PELCO-D/VISCA, etc all complete.

SITC of Compact Full Range 6.5" Ceiling Speaker 15 W RMS Power @ 8 Ohms, Frequency Response (±3 dB) 95Hz - 15kHz, Frequency Range (-10

dB)68 Hz – 17 kHz,130 degrees conical Coverage , Maximum SPL 103 dB or better, UL etc complete required as per specifications.

13 SITC of 4x120 watt @ 4Ω Analog Power Amplifier, 70V/100V. Nos 6 1,44,890.78 8,69,344.66

Digitally signed by AMIT

SINGH 15:49:02 IST

SITC of Video conferencce system with multiparty calling of 1+ 5 , sites MP codec with triple display dual network support along with 20 x zoom

14 PTZ Camera Autofocus ,USB device mode activation in for web meetings , PC peripheral kit. Support Microsoft team, zoom, google hangout, Nos 6 7,80,651.91 46,83,911.45

HDVC wave…suitable for IP & Soft VC

SITC of Meeting Space Collaboration operting System, Delivering a flawless start to any meeting enables supporting vast software web

conferencing platform support including MS Teams, Cisco WebEX, Zoom meeting and Google Meet. Shall support Wireless content sharing

from a mobile device or PC using AirPlay, Miracast, or Google Cast, Minimum 2 Miracast and Airplay each, and 4K support for dual monitors

15 provides an optimal collaboration with required multi usb camera supported software. experience.Intel®Intel® Core™ i7, Intel® UHD Graphics, 8 Nos 6 1,85,650.45 11,13,902.72

GB DDR4 , 8 M Cache, up to 4,90 GHz ± , 256 GB SSD, 2.4Ghz /5Ghz /BT 4.2, 802.11ac / BT 4.2, 10/100/1000 Gigabit LAN, AUDIO IN + OUT, USB-A 3.0

x 2, USB-A 2.0 x 4, RJ45 10/100/1000 M x 1, HDMI 1.4 out (4K@30 Hz) x 1 Jack 3,5 mm Line out x 1, Jack 3,5 mm Mic in x 1, WIFI/BT ANT x 2. wirelress

keyboad mouse etc.

SITC of Delegate Discussion Unit with Flush mount Goosneck microphone having Mic capsule: Electrostatic capacitive type, Directivity Pattern:

Cardioid Frequency response: 20-20,000 Hz, Turn-on sensitivity : 40 dB (10 mV) at 1V at 1 Pa Impedance 200 ohm High maximum SPL : 142 dB SPL,

16 1 kHz at< 3% T.H.D. Dynamic range(typical) 125 dB, 1 kHz at highest sound pressure level S / N75 dB, 1 kHz at 1 Pa Phantom power: DC 11-52V, Nos 4 35,000.09 1,40,000.34

power consumption 5.7 mA typical Switch Touch control: On / Mute, Built-in ring-shaped LED status indicator, Built-in RF filter etc all complete

SITC of 5 Meter Premium High Speed HDMI 2.0b Flexy Cable, Bandwidth up to 18Gbps, Up to 4096x2160@60Hz at RGB 4:4:4 video resolution, etc

SITC of Microphone Cable, 2 Conductor 22 AWG Tinned Copper, PE Insulation, 85% Tinned Copper Braid Shield, Cotton Braid, PVC Jacket (as

per actual) etc all complete.

SITC of 17U/18U, Equipment Rack, with Front & Side doors, 4 No Fan Assembly, on Top of the Rack, 4 Caster wheels, 2 no Shelfs to mount the

equipments which are not rack mounted, 8X2, 5/6 Amp. Power Distribution Unit, Cable Manager & Sufficient Rack hardwares.

SUPPLY of 28 Ports PoE layer 3 Network Switch with a advanced security features, Should having minimum 700W PoE in total, 30W PoE/per port

20 Auto Smartports, QoS, VLAN, and access control features, Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping, Head-of- Nos 6 1,25,550.31 7,53,301.84

line (HOL) blocking, Web-based authentication etc all complete

Providing & Fixing of Digital Wooden podium with 21.5 inch interactive screen , Podium should having connectivity of HDMI , USB , LAN ,XLR For

21 goosneck microphone & power socket for LAPTOP & other required item,should have top sliding cover for taptop positing , and sliding tray for Nos 2 2,98,500.73 5,97,001.46

Document camera.

22 SITC of cable cubby with HDMI , power and Lan port Nos 50 18,500.05 9,25,002.26

Digitally signed by AMIT

SINGH 15:49:02 IST

Sno. Item Specifications Unit Seating Rate DSR Amt NS Amount

Providing & Placing factory fabricated BOARD ROOM TABLE OF SIZE:-As per approved ,

Table top is made up of 36mm MDF finished with 4mm premium quality Veneer finished with PU polish . Understructure is made up of 25mm MDF Gable ends and

18mm MDF modesty finished with Veneer with PU polish . All the edges is finished with 2mm PVC lipping of matching veneer shade. Electricals Raceway below the

Confren table top made up of 0.8mm CRCA sheet duly powder coated with 45microns , The Metal part is treated with 7 tanks antirust process and powder coated with

ce table NANO powder coating technology.

Access Flap is provide on the table top as per requirement and image for easy access to electricals and data points . The manufacturer should have BIFMA

membership,& Greenguard ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications .

Providing & Supplying factory fabricated Medium Back revolving chair upholstered The seat and back are made up of 1.2cm thick hot pressed plywood

upholstered moulded Polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. BACK SIZE: 450mm (W) x 520mm(H). SEAT

SIZE: 480mm(W) x 490mm(D). Overall Height of chair is 900-950mm .The seat and back have a premium quality chrome finish strips for high aesthetics & are Joined

together. The armrest assembly comprises of Chrome with cushion on top which is connected and bolted to both seat and back . The chair has TORSION BAR

MECHANISM. The Gaslift shall be BIFMA-Clas-III compliant and have a adjustment of 80mm.The Chair base is made of Chrome Polished finish and is fitted with 5nos.

twin wheel nylon castors of 60mm dia .The colour of Leatherite shall be as per instructions of Architect approval. The work shall be carried out under the guidance

and instructions from project incharge.All the dimensions will be as per the Original Manufacturer's Specifications. The manufacturer should have BIFMA member,&

Greenguard ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications .

Providing & Supplying factory fabricated High Back revolving chair upholstered The seat and back are made up of 1.2cm thick hot pressed plywood upholstered

moulded Polyurethane foam. The back foam is designed with contoured lumber support for extra comfort. BACK SIZE: 450mm (W) x 520mm(H). SEAT SIZE:

480mm(W) x 490mm(D). Overall Height of chair is 900-950mm .The seat and back have a premium quality chrome finish strips for high aesthetics & are Joined

together. The armrest assembly comprises of Chrome with cushion on top which is connected and bolted to both seat and back . The chair has TORSION BAR

MECHANISM. The Gaslift shall be BIFMA-Clas-III compliant and have a adjustment of 80mm.The Chair base is made of Chrome Polished finish and is fitted with 5nos.

twin wheel nylon castors of 60mm dia .The colour of Leatherite shall be as per instructions of Architect approval. The work shall be carried out under the guidance

and instructions from project incharge.All the dimensions will be as per the Original Manufacturer's Specifications. The manufacturer should have BIFMA member,&

Greenguard ,FSC , AIOTA & NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications .

Providing & Supplying factory fabricated Medium Back Fixed base chair upholstered with Leatherite . The seat and back are upholstered with leatherite and

moulded Polyurethane foam. BACK SIZE: 450mm (W) x 520mm(H). SEAT SIZE: 480mm(W) x 490mm(D). Overall Height of chair is 700-750mm .The seat and back have

a premium quality chrome finish strips for high aesthetics & are Joined together. The armrest assembly comprises of Chrome with leatherite covers which is

4 connected and bolted to both seat and back .The chair is fixed with a cantilever base made up of premium quality chrome. The base is provided with nylon shoes Each 125 13,200 16,50,004.03

. The colour of Leatherite shall be as per instructions of Architect approval. The work shall be carried out under the guidance and instructions from project

incharge.All the dimensions will be as per the Original Manufacturer's Specifications. The manufacturer should have BIFMA membership,& Greenguard ,FSC , AIOTA

& NABCB accrdiated ISO 9001:2015 and ISO 14001:2015 certifications.

Providingin place of main table with overall size of table 2100 x 2250 x 750mm. The main table shall be of size 2100 x 1050 x 750mm. The side unit shall be 1200 x 500

x 750mm. The table is made of 25 mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4 mm PVC membrane pressed on to top. Soft

closing access flap within-build power box are provided on work surface for wire management. The ERU top is made of 25 mm thick MDF one side pre-laminate

board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The modesty panel is made of 25 mm thick MDF one side pre-laminate board

6 CGM confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. The understructure is made of 25 mm thick Pre-laminated twin board of E1-P2 grade Each 1 1,35,680 1,35,680.33

and approved shade edge banded with matching 2 mm thick PVC lipping. The pedestal is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and

approved shade edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25 mm thick MDF one side pre-laminate board with 0.4 mm PVC

membrane pressed on to top pedestal construction is BOX-BOX-FILE type which uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is

325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security.

Supplying and Placing in place of 3 seater sofa. The overall dimensions of the sofa shall be 1960W x 905D x 855H. The seat should be made of PU foam with Density

28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK

sofa 3 FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered

sheater with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per

IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over

understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Supplying and Placing in place of 1 seater sofa. The overall dimensions of the sofa shall be 1460W x 905D x 855H. The seat should be made of PU foam with Density

28 ± 2 kg/cu.mtr having an additional top layer of supersoft PU foam with Density 32 ± 2 kg/cu. Seat should be upholstered with fabric or leatherette. 2) BACK

FOAM: The back should be made of PU foam with Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered

with fabric or leatherette. Understructure should be made up of 1.2±0.1 cm. thick hot pressed plywood (which also shall be resistance and termite proof as per

IS:303.) and pinewood of cross section deviod of major knots and surface defects 6 nos. per seat and 3.8mm dia. zigzag spring assembly is mounted over

understrucrure for cushioning effect. It should be a welded assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap.

Digitally signed by AMIT

SINGH 15:49:02 IST

Glass shall be 10+/-0.3mm thick black tinted toughened glass UV glued with bushes made in SS 202 grade for fixing with understructure. It shall be a welded

assembly made in SS202 grade having dia. 12+/-0.04 as per IS:1762. overall dimensions of table shall be Width of table= 60.0 cm, Depth=60.0 cm, height=35.1 cm.

The Back Unit shall be of dimensions 1800 x 500 x 750mm. It shall be made of 25mm thick MDF – one side pre-laminate board confirming to IS-14587:1998 with 0.4

mm PVC membrane pressed on to top. The Slide door unit is made of 25 mm thick Pre-laminated twin board of E1-P2 grade and approved shade edge banded

with matching 2 mm thick PVC lipping. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Storage is provided with

lock for security.

SUB TOTAL OF FINISHES 84,47,496.02

Digitally signed by AMIT

SINGH 15:49:02 IST