Supply of constructional material and compact item for various type of works under MGNREGS (For Itahar Block)

Local Sand

Medium Sand

Course Sand

Portland Cement

1st Class Traditional Brick (Kiln Burnt)

1st Class Picket Jhama Brick

Stone Aggregate (20mm nominal size) (Pakur Variety)

Stone Aggregate (10mm nominal size) (Pakur Variety)

Stone Aggregate (6mm nominal size) (Pakur Variety)

Hire charges of shuttering plank with prop including all fittings (25mm to 30mm thick)

Hire charges of Concrete mixer 0.25 to 0.40 cum with hooper including fuel and operator

Polythene sheet (150 gm per sqm)

Thermocol 12.5 mm thick.

Installation of Concrete Display Board as per specification

Supply of reinforcement bar (TATA/SAIL/SRMB etc)

Supplying, fitting & fixing structural members of specified sections weighing less than 22.5 Kg./m

Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than 150mm apart complete in all respect as per design including cost of all labour and materials. For Door Shutter

Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete (1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing. Without integrated grills (b) Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars.

M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. (NB: Quantity is only of area of W & V and multiply @ 16 kg / sqm)

White washing including cleaning and smoothening surface thoroughly. (c) Three coats (on new works only). (NB: Quantity count on plastered surface on building portion only excluding the quantity of neat cement punning)

Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly (plastered or concrete surface) as per manufacturer's specification. (iii) Two coats. (NB: Quantity same as the quantity of White Washing)

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. (NB: Quantity= area of Door, Window & Ornamental Grill & using 2.2 is the multiplying factor for painting)

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary: (b) On steel or other metal surface (iv) Two Coats (with any shade except white) a. Steel Surface (NB: Quantity= same as quantity of priming)

Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

(B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (i) Coloured decorative

Supplying fitting approved type ventilator in position after cutting holes in walls setting in cement mortar mending damages to wall and plaster and two coats of paint of approved brand of any shade. Payment of mending good damages of wall & plaster and painting to be made separately (b) R.C.C ventilator of 20 mm. thick (i) Upto 0.10 sq.m. area

Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding 'P' or 'S' trap (ii) 530 mm X 410 mm

Soil Pipe: Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (b) 110 mm

Supplying,fitting and fixing cast iron 'P' or 'S' trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (A) 'P' Trap (iii) 100 mm

Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (A) (i) Single Socketed 3 Meter Length (a) 75 mm

xv) Vent Cowl (a) 75 mm

Making Shed by Thatch Eve covering the pit including bamboo post with frame at a minimum height of 7' (seven fit) with all necessary articles as per direction of EIC (Item for Vermi Compost Pit)

Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm). (a) 19mm mesh.---------------for Pit covering (Item for Vermi Compost Pit & Poultry Shed)

Outlet net (Item for Vermi Compost Pit)

Supplying Earthworm (Good Quality) (Item for Vermi Compost Pit)

RCC Precast Ring for Leach Pit (900mm dia) with installation and all necessary mortar for jointing

Making shed by wooden frame, galvanised iron sheet including all necessary articles like nails, screw etc as per direction of EIC (3.10 m X 2.40 m) (Item for Poultry Shed)

Making shed by wooden frame, galvanised iron sheet including all necessary articles like nails, screw etc as per direction of EIC (3.50 m X 1.20 m) (Item for Piggery Shed)

Making shed by wooden frame, galvanised iron sheet including all necessary articles like nails, screw etc as per direction of EIC (2.80 m X 2.40 m) (Item for Goatery Shed)

Making shed by wooden frame, galvanised iron sheet including all necessary articles like nails, screw etc as per direction of EIC (3.80 m X 3.30 m) (Item for Cow Shed)

Making door by wooden frame, galvanised iron sheet including all necessary articles like nails, screw etc as per direction of EIC (0.75m X 1.80m) (Item for Poultry / Piggery Shed)

Precast Concrete Post (4" x 4")

Supplying, fitting & fixing Structural Works in Roof Trusses etc. using joists, channelsand angles of specified section weighing less than 22.5 kg/ m

Asbestos corrugated (Trafford or similar approved quality) sheet (6 mm thick) work (excluding the supporting framework) fitted and fixed with 9.5mm. dia. J or L hook-bolt and nuts, limpet and bitumen washers and putty with 150 mm end lap & one corrugation minimum side lap complete. (Payment should be made on area of finished work)

Supplying, fitting and fixing GCI Sheet for roofing with wooden roof trust (Roof size=1.35mtr x 1.35mtr)

Supplying, fitting and fixing GCI sheet for door (Height 5'-0") with necessary timber batten

Ceramic Rural Pan

Washer, Nut Bolt, GI wire, hinges, Sikols, P.Sheet etc with any other necessary items

PVC pipe (4" dia , 3' long with Y-Junction)

Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor) (i) In Roof:- a) With 0.60 mm thick sheet

Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. (b) 50 mm thick interlocking designer concrete paver block M-30 grade for non-traffic zone,buiding premises, garden, parks, domestic drive as per IS: 15658-2006(over 20-30 mm medium sand bed on 200mm thk boundgnaular /granular base course including cost of sand for sandbed but excluding cost of base course & subgrade preparation.) (ii) Coloured Decorative

Saniya Construction

FEROJI ENTERPRISE

SAHARA CO.OP. LABOUR CONTRACT AND CONSTRUCTION SOCIETY LTD

MEHER ARJU AND SNEHA ENTERPRISE

J P K Trading

SM ENTERPRISE

GOLA BANU BEGAM

Saniya Construction

FEROJI ENTERPRISE

SAHARA CO.OP. LABOUR CONTRACT AND CONSTRUCTION SOCIETY LTD

MEHER ARJU AND SNEHA ENTERPRISE

J P K Trading

SM ENTERPRISE

GOLA BANU BEGAM