Construction of Combined office Building at Dheera District Kangra (HP)

Amount

Excavation in foundation, trenches etcetera in earth work involving all classification of soil such as pick work, pick jumper work, blasting work, soft or hard rocks including chiseling/wedging out of rocks where blasting work is prohibited or any other mixed variety of soil, dewatering and removal of slush if arrisen during course of construction and lifts upto all heights including stacking the excavated soil not more than three meters clear from the edge of the excavation and then returning the stacked soil in 15 cm (fifteen centimetre) thick layers when required into plinths, sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth within all leads,lifts by any mode of transportation and other incidental, as per the direction and entire satisfaction of Engineer-In-Charge. Any loss to the private and public property during course of construction shall be absolute responsibility of the contractor. Rate is inclusive of royalty, malkana, sale tax, toll tax, GST and other taxes imposed by the government.

Excavation in earth work, lift upto 1.50 mtr (One decimal five zero metre) stacking the excavated soil not more than 3.00m (Three metre) clear from the edge of the excavation and then returning the stacked soil in 15cm (Fifteen centimetre) layers, when required in to plinths, sides of foundations etcetra consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth upto any lead lift and as per the direction of Engineer-in-Charge. Rate is inclusive of royality, malkana, sale tax, toll tax, GST and any other taxes as imposed by the government.

Excavation in drains and channels etcetra in earth work in all classification of soil, such as pick work, jumper work, pick jumper work, blasting work, hard and soft blasting, saturator soil including chiseling wedging rocks where blasting work is prohibited or any other mixed variety of soil, lift upto any heights, stacking the excavated soil for all heights from the edge of excavation and then returning the stacked soil in 15cm (Fifteen centimeter) layer when required into plinths sides of foundations etcetra. Consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer- Incharge, within all leads, lifts and other incidentals. Rate is inclusive of royality, malkana, sale tax, toll tax, GST and any other taxes as imposed by the government.

Filling in plinth with sand under floor including watering, ramming, consolidating and dressing complete as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of royality, malkana, sale tax, toll tax, GST and any other taxes as imposed by the government.

Providing and laying cement concrete 1:6:12 (One cement isto six sand isto twelve aggregate) graded crushed stone aggregate 40mm (forty milimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth, including entire carriage of material with in all leads, lifts and other incidentals, and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of royality, malkana, sale tax, toll tax, GST and any other taxes as imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering, strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in foundation, Footings, bases of columns and mass concrete including cost and carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of royality, malkana, sale tax, toll tax, GST and any other taxes as imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars , posts and struts, square, rectangular or polygonal in plan in all floor levels including cost and carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of royality, malkana, sale tax, toll tax, GST and any other taxes as imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in beams, cantilevers, girders, lintels, sides, and soffits of beams, haunchings, cantilevers, bressumers upto all depths in all floor levels including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors, roofs, landings and the like floor etcetra including cost and carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for cast in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls up to any thickness/ any height including cost and carriage of material with all lead & lift and other incidential, sale tax, toll taxes, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five millimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five millimetre) so as to give a fair finish including centring, shuttering strutting and propping etcetra, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in stairs cases with slopping or stepped soffits, excluding, landing in all floo levels The rate is inclusive of cost and carriage of material with in all leads, lifts and other incidentals, and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing form work with steel plates of 3.15mm (three decimal one five milimetre) thick, welded with angle iron in frames of 30x30x5mm (thirty into thirty into five milimetre) so as to give a fair finish including centring, shuttering strutting and propping etc, with wooden battens and ballies for all heights/depths of propping and centring below supporting floor to ceiling and removal of the same for in-situ reinforced concrete and plain concrete work in edges of slabs and breaks in floors and walls up to any width/ depth includingf cost and carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:5:10 (One cement isto five sand isto ten aggregate) graded crushed stone aggregate 40mm (forty millimeter) nominal size mechanically mixed and curing complete, excluding cost of form work in foundation and plinth as per approved specification and drawing including entire carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of rayality, Malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M20 (M-twenty) mix design to obtain the minimum compressive strength 20N/mm2 ( twenty newton per millimeter square) with cement contents not less than 330 kg/ cum (Three hundred kilogram per cubic metre) mechanically mixed and vibrated and curing complete excluding cost of form work and reinforcement for reinforced concrete work in foundation, footing, base of columns, and the like mass cooncrete as per approved specification, drawing and design including entire carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of Royality, malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying Damp Proof Course 100mm (One Hundred millimetre) thick with cement concrete 1:2:4 (one cement isto two sand isto four graded crushed stone aggregate 12.5mm (Twelve decimal five millimetre nominal size) mechanically mixed including cost of form work and curing complete, as per H.P.P.W.D. specification, approved drawing, design, as per entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidential. The rates is inclusive of octroi royality, malkana, sale tax, toll tax, GST and any other taxes as imposed by the government.

Providing and laying cement concrete grade M-25 (M-Twenty five) design mix with minimum compressive strength 25N/mm2 ( twenty five newton per millimetre square )with cement contents not less than 360 Kg (Three hundred sixty kilogram) per Cubic metre mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding the cost of form work and reinforcement for reinforcement cement concrete work in column, pillars posts and struts in all depth/thickness upto any floor level including carriage of materials with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of Royality, Malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete work M-20 design mix to obtain the minimum compresive strength 20N/mm2 (Twenty newton per millimetre square) with cement contents not less than 320 kg (Three hundred twenty Kilogram) per cubic meter and curing complete mechanically mixed and vibrated as per approved specification, drawing and design, excluding cost of form work and reinforcement for reinforced concrete work in suspended floor, roofs, landing and shelves and their supports balconies, beams, girder, bressumers and cantilivers upto any floor level as per approved drawing, design and specifications including carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of Royality, Malkana, Sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete grade M-20 (M-Twenty) design mix with minimum compressive strength 20N/mm2 (Twemty newton per millimetre square) with cement contents not less than 320 Kg (Three hundred twenty kilogram) per Cubic metre, mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding the cost of form work and reinforcement for reinforced cement concrete work in stair cases (except spiral stair cases) excluding landings, but including preparing of top surfaces and finishing of nosing upto all floor levels as per specifications approved drawing and design including carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of Royality, Malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete grade M-25 (M-Twenty five) design mix with minimum compressive strength 25N/mm2 (Twemty five newton per millimetre square) with cement contents not less than 360 Kg (Three hundred sixty kilogram) per Cubic metre mechanically mixed and vibrated including curing complete as per PWD specification, drawing and design excluding the cost of form work and reinforcement for reinforced cement concrete work in wall any thickness but not less than 0.l0 m (zero decimal one zero one metre) thickness attached pilasters, buttresses, plinth & string course etecetra including carriage of material with in all leads, lifts and other incidentals. The rate is inclusive of octroi, Royality, malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying plain cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate 40mm (Forty millimetre) nominal size & curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing and design including entire carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of octroi, Royality, Malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying tor steel of TATA, TISCO/ SAIL reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all respects as per approved drawing, design, and specification in all floor levels including the cost of binding wire and cost of dewatering if arrisen during placement of reinforcement as per PWD specification, approved, drawing and design including carriage of materials with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-In- Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Second class brick work using common burnt clay building bricks in cement mortar 1:6 (one cement isto six sand) in super structure upto all floor lavels as per PWD specification, drawing and design and curing complete including scaffolding and carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Second class half brick work using common burnt clay building bricks with hoop iron in cement mortar 1:4 (one cement isto four sand) in super structure up to all floor level as per PWD specification, drawing and design and curing complete including scaffolding and cost and carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Squared rubble masonry crushed with hard stone of approved quality in foundation and plinth including racking out the joints in cement mortar 1:6 (one cement isto six sand) and curing complete including carriage of material with in all leads, lifts and other incidentals and further as per the approved specification, drawing and design. Rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Squared rubble masonry crushed with hard stone of approved quality in foundation and plinth including racking out the joints in cement mortar 1:5 (one cement isto five sand) and curing complete including carriage of material with in all leads, lifts and other incidentals and further as per the approved specification, drawing and design. Rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and any other taxes imposed by the government.

Stone filling tightly dry hand packed under flooring including ramming and consolidation complete as per the direction of Engineer-in-Charge including carriage of material with in all leads, lifts and other incidental . The rate is including of octroi, royality, Malkana, sale tax, toll tax , sales tax or other taxes imposed by the government.

Providing and fixing Coloured anodised aluminium frames for door, window and ventilator and glazing partition extrusion section of Jindal/ Hindalco as per approved shade for door, window ,ventilator and partition with extruted built up standard tubular and other sections of approved make confirming to IS:733 and IS:1285 anodised transparent or dyed to require shade accordingly to IS:1868 (minimum anodic coating of grade AC15) fixed with raw plugs and screws or with fixing clips , necessary filling up of gaps and junctions at top , bottom and sides with required with PVC / neoprene filles etcetra aluminium section shall be smooth rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium, snap beeding for glazing/ panelling C.P. brass / stainless steel screws all complete as per approved specifications, drawing and design including carriage of material with in all leads, lifts and other incidentals. The rate is including of octroi, royality, Malkana, sale tax, toll tax , sales tax or other taxes imposed by the government.

Providing and fixing 12mm (Twelve millimetre) thick Prelaminated particle of action tesa / kitlam/ kitply/ green ply as per ISI and of approved shade for infill panels of aluminium door as per PWD specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 6mm (six millimetre) thick glazing with glass pan of Modiguard/ Saint Gobain in aluminium door, shutters with PVC / neoprens gaskets complete as per the Architectural Drawings, approved specification and design and the direction of the Engineer -in Charge, (Cost of aluminium snap beeding shall be paid in basic item) including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge including cost and carriage of material with in all leads, lifts and other incidentals and further as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing Factory made 35mm (Thirty five millimetre) thick flush door shutters of Century/ Alpro of approved shade both side commercial including non decorative phenol bonded termite resistant and boiling water proof core of block board construction with Ist class frame of hard wood and well matched commercial 3 (Three) ply veneer with vertical grains or cross bands and face veneer on both faces of flush door as per approved specifications, drawing and design including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing to existing door frames, 30mm (Thirty millimetre) thick factory made PVC panelled door shutter consisting of frame made out of M.S. tubes of 19 gauge (Nineteen gauge) thickness and size of 19mm x19mm (Nineteen into nineteen millimetre) for styles and 15mmx15mm (fifteen into fifteen millimetre)for top & bottom rails, M.S. frame shall have a coat of steel primers of approved make and manufacture M.S. frame covered with 5mm( five millimetre) thick heat moulded PVC "C" channel of size 30mm( thirty millimetre) thickness, 70mm( Seventy millimetre) width cut of which 50mm (fifty millimeters)shall be flat and 20mm ( twenty millimeters) shall be tappred in 45 (forty five) degree angle on either side forming style and 5 mm ( five millimetre) thick, 95mm ( ninety five millimetre) wide, PVC sheet out of which 75mm (Seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered in 45 ( forty five)degree on the inner side to form top and bottom rail and 115mm (one hundered fifteen millimetre) wide PVC sheet out of which 75mm (seventy five millimetre) shall be flat and 20mm (twenty millimetre) shall be tapered on both side to form lock rail, top, bottom and lock rail shall be provided either side of the panel 10mm (ten millimetre) thick, 20mm (twenty millimetre) wide cross PVC sheet be provided as gap insert for top rail and bottom rail paneling of 5mm (Five millimetre) thick both side PVC Sheet to be fitted in the M.S. frame welded/sealed to the style & rails jointed mitred and jointed with solvant cement adhesive including fixing of PVC shutter with existing frame with MS butt hinges/riveted with necessary screws of code No. 9.120 of Rajshri as per approved specifications, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing glazing in aluminium windows, ventilators 4 mm ( four millimetre) thick of Modiguard/ Saint Gobain with PVC / neoprens gaskets etcetra complete as per the approved Drawings, design and specification and the direction of the Engineer -in Charge, (Cost of aluminium snap beeding shall be paid in basic item) including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 4 mm (four millimetre) thick forested glass of Modiguard/ Saint gobain for ventilaotr/windows with PVC / neoprens gaskets etcetra complete as per the approved Drawings, design and specification and the direction of the Engineer-in-Charge, (Cost of aluminium snap beeding shall be paid in basic item) including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing stainless steel wire mesh for shutter of aluminum doors, windows, ventilaotrs with necessary fitting and complete as per detail and drawing of doors and windows complete as per the Architectural Drawings, design and approved specification and the direction of the Engineer -in Charge, (Cost of aluminium snap beeding shall be paid in basic item) including cost and carriage of material with in all leads, lifts and other incidentals and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing aluminium anodised powder coated grill 8 mm (eight millimetre) thick to existing window/ventilatior with 80mmx80mm (Eighty millimetre into Eighty millimetre) panels with 25x8mm (Twenty five into eight millimetre) thick aluminium flat in windows and ventilators including fixing with aluminium screws or bolts and nuts complete in alluminium channels base frames (Aluminium channels base frames to be measured and paid for separately) as per approved specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sle tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing the complete box of cup board sahll be made of 25mm (Twenty Five millimetre) thick water proof termite resistant commercial board of Uniply / Green ply/ IS marked including shelves back side of board shall have 8 mm (Eight millimetre) thick water proof ply. All the cut portion of board shall have 6 mm (Six millimetre) thick hard wood edgenig. The shutter from all side shall be finished with 1mm thick lamination ISI Marked of approved shade of Century / Greenlam /Action Tesa and 19 mm (Nineteen millimetre) thick water proof comercial board of uniply / Greenply for shelves including hinges, handle,knob megnatic catcher complete as per specifications, approved drawing, design, as per the entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 19mm (Nineteen millimetre) thick water proof commercial board SDB shutter of Uniply / Kitply/ Century Ply/Action/Tesa/ Marino with 6 mm (Six millimetre) thick hard wood edgenig and 1mm thick laminated from out side of approved shade and PGI sheet lining inside including hinges, handle,knob & neccessary fitting complete as per approved specifications, drawing, design,and entire satisfaction and direction of the Engineer-in-Charge including carriage of material within all leads, lifts and other incidentals. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 50x31 mm (Fifty into thirty one millimetre) Second class deodar wood Grid frame work at 60 cm (Sixty centimetre) centre to centre for teak ply paneling and fixed in position. including carriage of material within all leads, lifts and other incidentals, and further as per specification, approved drawing & design as per direction and satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing 8mm (Eight millimetre) thick teak ply of Uniply / Kitply/ Action Tesa/ Marino and of approved shade & design for paneling including fixing with approved adhesive, butt jointing and nails & screws complete (Base frame work to be measured & paid for separately) including carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing & design , as per direction and satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing First class indian teak wood decorative beading 25mmx12mm (Twenty five millimetre into twelve millimetre) section with wood screws over paneling including, moulding, mitring at junctions and carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing & design, as per direction and satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing First class indian teak wood decorative beading 55 x 30mm (Fifty five into thirty millimetre) section with wood screws over paneling and lining including moulding, mitring at junctions and carriage of material within all leads, lifts and other incidentals and further as per specifications, approved drawing & design, as per direction and satisfaction of Engineer-in-Charge. The rate is inclusive of octroi, royality, malkana, sale tax, toll tax, GST and all type of other taxes imposed by the Government.

Providing and fixing coloured / anodized aluminum sliding door bolt, anodized transparent or dyed to required colour and shade with bolts and nuts, screws etcetra complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge.Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

300x16mm (Three hundred into sixteen millimetre) size

250x16mm (Ttwo hundred fifty into sixteen millimetre) size

Providing and fixing coloured anodized aluminum tower bolts (barrel type) anodized transparent or dyed to required shade and colour with screws etcetra complete including carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150x10mm (One hundred fifty into ten millimetre) size.

100x10mm (One hundred into ten millimetre) size.

Providing and fixing coloured / anodized aluminum handle anodized transparent or dyed to required shade or colour with necessary screws etcetera complete 125mm (One hundred twenty five millimeter) size including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

125mm (One hundred twenty five millimetre) size.

100mm (One hundred millimetre) size.

Providing and fixing 100mm (One hundred millimetre) matt finished Aluminium floor door stopper with rubber cushion screws etcetra to suit shutter thickness complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100 mm (one hundred millimetre) matt finished Aluminium hard drawn hooks and eyes complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax toll tax, GST and any other taxes imposed by the government.

Providing and fixing 125mm (One hundred twenty five millimetre) oxidized M.S. double acting spring hinges with necessary screws complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing Bright finished M.S. hydraulic door closer ISI Marked with necessary screws complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600x600x15mm (Six hundred into six hundrred into fifteen millimetre) square edge tile of Aluminium sheet ceiling (ACP ) with rock wool backing 40mm (Forty millimetre) thick layer Powder coated T-grid system @ 600mm c/c with aluminium screws and beading and necessary fitting complete as per approved specification , drawing , design and entire satisfaction and direction of Engineer-in-Charge including carriage of material within all leads , lifts , and other incidentals. The rate is inclusive of oxtroi , royality , malkana , sale tax , toll tax , toll tax GST and all type of other raxes by the Government.

Providing and laying 19 mm (Nineteen millimetre) thick polished Grey/black granite stone in work counter / top heaving semiround noising, moulding and laid over 20 mm ( twenty millimetre) thick base of cement mortor 1:3 (one cement isto three sand) and jointed with cement slury mix pigment to match the shade of granite stone including rubbing polishing, moulding and nousing complete as per approved specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 25mm (Twenty five millimetre) thick Cheema Pink granite in flooring & skirting in combination with black granite border laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, polishing moulding and nousing complete as per approved specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 25mm (Twenty five millimetre) thick Cheema Pink granite single slab (Partially framed) with double rounded noising laid over 20mm (Twenty millimetre) (average) thickness base of cement mortar 1:3 (One cement isto three sand) and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including rubbing, noising, moulding and polishing complete as per approved specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm ( six hundred into six hundred millimetre) full body matt finish vetrified tiles of restile/ Nitco/ Rak/ Simpolo/ Kajaria/ Johnson as per approved shade in flooring and skirting laid over 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as per approved specification, drawing and design complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 600x600 mm (Six hundred into six hundred millimetre) double charge / Ultra Charge vetrified tiles of Resitile/ Nitco/ Kajaria/Rak/Johnson/Bell water proof stain and impact resistent heavy duty vitrified tiles of approved shade and colour in flooring and skirting laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete as per specifications, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying Precast terrazzo tiles 300x300x25mm (Three hundred into three hundred into twenty five millimetre) thick automatic Hydraulic commpressed and polished Terrazzo tiles of NTC in flooring and skirting ISI marked No IS: 1237 top layer in (50%) (Fifty Percent) white and 50% (Fifty percent) in white yellow dark green and maroon chips of size 0,B and 2B size with marble chips of specified sizes laid in floors, treads of steps and landings laid on a bed of 25mm (Twenty five millimetre) average thickness of cement mortar 1:6 (one cement isto six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (where ever required) including rubbing and polishing complete as per specifications, approved drawing and design including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 300x300 mm (three hundred into three hundred millimetre) Antiskid Cermic Tiles of Premimum quality of Nitco/ Kazaria/ Johnson / Orient Bell in flooring & skirting laid over 12mm (Twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specifications, drawing and design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and fixing 300x450 mm (three hundred into four hundred fifty millimetre) Cremic Glazed tile in Dado of Kazaria/ Nitco/ Simpolo/ Somany/ Jonson/ Orient Bell in skirting, riser of steps and dado laid over 12mm (Twelve millimetre) thick cement mortar 1:3 ( one cement isto three sand) and jointed with white cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specification, drawing and design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 300x600 mm (Three hundred into six hundred millimetre) Cremic Glazed tile cladding with granite sami round moulding on top of approved shade and size of Kazaria/ Nitco/ Simpolo/ Jonson/ Orient bell in skirting, riser of steps and dado laid over 12mm (Twelve millimetre) thick cement mortar 1:3 ( one cement isto three sand) and jointed with white cement slurry mixed with pigment to match the shade of tiles as required complete upto all floor level in all heights as per approved specification, drawing, design and entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and Laying 19mm (Nineteen millimetre) thick green marble with round nosing at the top of portition walls in in cement mortar 1:3 (one cement isto three sand) and joint with cement slurry mix pigment to match the shade including rubbing, poilshing , moulding and noising complete upto all floor level in all heights as per approved specification, drawing and design including carriage of materials with in all leads, lifts and other incidental and further as per the direction and entire satisfaction of Engineer-in-Charge. The rate is inclusive of oxtroi , royality , malkana , sale tax , toll tax , toll tax GST and all type of other raxes by the Government.

Providing and fixing 0.60mm (sixty millimetre) thick prepainted steel sheet (IS marked Z-120) of TATA Durashine/ sail over steel trussed in roofing with hot dipped metalic zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating of back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks,bolts and nuts 6mm (six millimetre) diametres with prepainted limpet and rubber washers complete with all accessories as required as per specification, drawing and design including carriage of materials with in all leads, lifts and other incidentals as per the direction and entire satisfaction of Engineer-in-charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted steel sheet ridge or hips of TATA Durashine/ Sail 60cm (sixty centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet in roofing with hot dipped metalic zinc coated sheets with top coat of regulat modified polyster organic coating of 20 (twenty) microns over 5 (Five) microns primer coating + back coating of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six millimetre) dia prepainted bitumen washers complete in all respect as per approved specifications, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing pre-painted sheet valleys 90cm (Ninety centimetre) over all with 0.60mm (zero decimal six zero millimetre) thick prepainted sheet of TATA Durashine/ Sail in roofing with hot dipped metalic zinc coated sheet with top coat of regulatr modified polyster organic coating of 20 (twenty) mocrons over 5 (Five) microns coating + back coat of polyster of 5 (Five) microns over 5 (Five) microns primer coating including fixing with J or L hooks, bolts and nuts 6mm (Six millimetre) dia with prepainted limpet and bitumen washers complete in all respect as per specifications approved drawing and designincluding cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Steel work of TATA/SAIL welded in built up sections in trusses and frame work including cutting, hoisting and fixing in position and applying a primer coat of red lead paint in beams joints, channels angles tees flats with connections plates or angle cleats as in main and cross beams, hip and jack rafters, purlins connected to common rafters and the like including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 30cm (Thirty centimetre) wide 25cm (Twenty five centimetre) deep plain G.I. sheet gutter of 0.60mm (zero decimal six zero millimetre) thick sheet fixed with bolts, nuts and washers etcetra having dome shape gratting including making necessary connections with rain water pipe complete including cost and carriage of material with in all leads, lifts and other incidentals as per specifications, approved drawing and design, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. B.P. sheet 2 mm (two millimetre) thick of TATA/SAIL for eaves board/Facia/Soffit/Ceiling including cutting, fixing and jointing with gass/electric welding with steel roof member and applying a coat of red lead primer complete as per PWD specification, approved drawing and design (frame work is to be measured and paid for separately) including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing M.S. round holding down or anchor bolts with nuts and washer plates complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face 110 mm (One hundred ten millimetre) diametre PVC (D-plast) rain water pipes of Finolex/Supreme/ Prince of working pressure not less than 6.00 kg/cm2 (Six kilogram per centimetre square) including filling the joints with approved adhesive complete including cost and carriage of material with in all leads, lifts and other incidentals, as per specifications, approveddrawing and design as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing on wall face PVC (D-plast) accessories for rain water pipes of Finolex/Supreme/ Prince including filling the joints with approved adhesive complete as per PWD specification, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer- in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

110mm (one hundred ten millimetre) dia PVC plain bend

110mm (one hundred ten millimetre) dia PVC shoe

Providing and fixing 110mm dia (one hundred ten millimetre) dia PVC Clamps of Finolex / Supreme/ Prince of approved design fixed with steel screws and rawal plugs etcetra complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth with cement mortar 1:6 (one cement isto six sand) curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) thick cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastering upto any floor level including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm (eighty millimetre) in girth with cement mortar 1:3 (one cement isto three sand) and curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

20 mm (Twenty millimetre) cement plaster with groves in two coats backing coat 10mm (Ten millimetre) and finishing coat 10mm (Ten millimetre) thick on fair side of brick/stone masonry walls for interior plastering upto floor all level including arrises,internal rounded angles, chamfers or rounded angles not exceeding 80mm (Eighty millimetre) in girth and finished even and smooth with Cement Mortar 1:6 (One Cement isto six Sand) and curing as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

6mm (six millimeter) cement plaster 1:4 (one cement isto four sand) in ceiling complete with curing and scaffolding as per PWD specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600x600x15mm (Six hundred into six hundred into fifteen millimetre) Mineral fiber tiles of Gyproc with wood backing and fixed with powder coated G.I frame work @ 60cm (Sixty centimetre) centre to centre in combination with 150x12mm (One hundred fifty into twelve millimetre) thick Border as per specifications, approval, drawing and design including cost and carriage of material within all leads , lifts and other incidentals as per the direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters and sand papered smooth to give final matt finish to the surface complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Finishing wall with Apex weather proof exterior emulsion of Asian paint/ Nerolak Suraksha paint/ Berger paint/Dulux paint of approved brand and manufacture and of required shade on undecorated wall surfaces (Two or more coats) to give an even shade after thoroughly brushing the surface to remove all dirt, dust and remains of loose powdered material including cost and carriage of material with in all leads, lifts and other incidentals as per specificatins, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Applying one coat of Acrylic Washable emulsion of Asian paint / Nerolac Suraksha paint / Berger paint / Dulux paint for interior painting with brushes plain smooth finish composed of acrylic polymere in emulsion inorganic including cost and carriage of materials with in all leads, lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of saele tax, toll tax, GST and any other taxes imposed by the government.

Wall painting (two coats) with premium emulsion paint of Asian paint / Nerolac Suraksha paint/ Berger paint / Dulux paint approved shade on undecorated wall surfaces to give an even shade including thoroughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth including applying of putty as required for making the surface including cost and carriage of materials with in all leads, lifts and other incidentals as per specifications, approved drawing, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Wall painting (two coats) with acrylic emulsion paint of Asian paint / Nerolac Suraksha Paint/ Berger paint / Dulux paint of approved shade for interior grade on undecorated concrete/stone/plastered wall surfaces to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty required for matting the surface including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Polishing two coats with french polish on new wood and wood based surfaces to give an even surface including cleaning the surface of all dirt,dust,and sand papered smooth and including a coat of wood filler including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Applying priming coat over new steel & other metal surfaces of Asian Paint / Nerolac Surksha paint after & including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and scoured with wire brushes, fine steel wool scrapers and sand paper complete with ready mixed priming paint Red-oxide/zinc oxide chrome including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Painting two coats of Asian Paint/ Nerolac Surksha Paint (excluding priming coat) on new steel and other metal surface with ready mixed paint of approval shade brusing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and Fixing acoustical panels of 600x1200x25mm (Six hundred into twelve hundred into twenty five millimetre) of Dexune acoustical / Himalyan / Armstronge / prolad / Gyptech fixed on wall with necessary fitting complete as per detail drawing & design and specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing Unistone/NTC Stone cladding12mm (Twelve millimetre) thick Cement Concrete surface, side as on faces of Arch masonry walls on 12mm (Twleve millimetre) thick cement plaster 1:3 (One cement isto Three sand) and jointed with cement slurry including scaffolding etcetra complete as per approved shade, drawing, design and specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Expension joint system related with wall joint (internal and external) location as per drawing and direction of Engineer-in Charge. The joint shall be filled with polysterence back or rod base menber self aligning /centering arrangement and support. The material shall be of such that it provides as expension joint system suitable for vertical wall to wall/ wall to corner application, both new and exisitng construction in office building and complexes with no slipping down tendancy amongest the component of the joint system shall be filled with sealent of Dr. Fixit/Pedelite. The joint system shall utilize light weight with polysterence back or rod surfaces mechanically snap locking multicelluar to facilitate movement as per specification approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying cement concrete 1:3:6 ( one cement isto three sand isto six graded, crushed stone aggregate 40mm (forty millimetre) nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinth including carriage of material within all leads, lifts and other incidentals as per direction and satisfaction of Engineer-in-Charge. Rate is inclusive od sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying plain cement concrete 1:2:4 (One cement isto two sand isto four graded crushed stone aggregate 20mm (Twenty millimetre) nominal size & curing complete, excluding cost of form work in foundation and plinth as per approved specification, drawing including entire carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax,toll tax, GST and any other taxes imposed by the government.

Providing 20 mm (Twenty millimetre) thick pattern in plaster in cement mortar 1:5 ( one cement isto five sand ) as per drawing, design and specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 300x300x25 mm (Three hundred into three hundred into twenty five millimetre) LABRADOR Design ( Rainbow Series) tile of NTC of approved shade in flooring laid over of 12 mm ( twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as per approved specification, drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying 60mm (Sixty millimetre) thick interlocking concrete block of NTC pavement as per drawing, design and technical specifications clause 1504 including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing plinth protection with 40 cm ( Sixty centimeter) thick interlocking tiles/ cement concrete paver block with 23 cm ( twenty three centimetre) dia half round stone ware pipe for drainage purpose laid over concrete 1:4:8 ( one isto four isto eight) complete including cost and carriage of material with in all leads, lifts and other incidentals as per drawing, design and specifications, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and Fixing stainless steel knock down railing of kich AISI 316 of 38mm (Thirty eight millimetre). Dia handrail fixed on 10 x50 mm (Ten into fifty millimetre) S.S flat baluster ( Design code DT-53-2 - 163 ) placed at 1200mm (Twelve hundred millimetre) centre to centre along with 3 (Three) Numbers @ 16mm (Sixteen millimetre) mid rail connected at the side of baluster with fixture. The baluster would be fixed on to floor with casted base plate of minimum 6mm thickness. Base plate shall be concealed with suitable S.S 316 grade cover cape. Railing height to be taken 85 mm (Eighty five centimetre) from floor level complete in all as per specifications, approved drawing and design including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 50 mm ( fifty millimetre) dia hollow stainless steel (SST) hand rail slip resistance with rounded ends at two level at 75 cm and 90 cm ( Seventy five centimetre and ninety centimeter) high and extended 30 cm ( thirty centimeter) beyond top and botton of ramp as per detail and 25 mm ( twenty five millimetre) dia SST bullasters welded to 50 mm ( fifty millimetre) dia SST pipe embended in cement concrete 600 mm (six hundred millimetre) center to center as per detail drawing, design and specification including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax toll tax, GST and any other taxes imposed by the government.

Providing and fixing Grab bar 50 mm ( fifty millimetre) dia SST pipe bars fixed with wall and floor as per detail and position of W.C. and Toilet including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 25mm (Twelve millimetre) diameter stainless steel curtain rod and brackets plugs etc. complete including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing orisa Pan No 20090 of size 53x41 cm ( fifty three into forty one centimeter) vitreous china water closet squatting pan (Indian Type W.C. Pan) of Cera/hindware/ Jaguar of star white/ snow white shade with low level PVC cistern (earth work, bed concrete, foot rest PVC cistern and trap to be measured and paid for separately) including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type W.C. of star S. No 20087 (S-10) of size 57x35x39 cm (fifty seven into thirty five into thirty nine centimeter) wash down water closet of hindware/jaguar/cera of star white/ snow white shade with integral P or S trap including jointing the trap with soil pipe including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 100mm (One hundred millimeter) size PVC ‘P’ or ‘S’ trap for water closet (squatting pan) including jointing the trap with the pan and soil pipe with adhesive including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing P.V.C low level duel flushing cistern (Sleek plus) of Cera/Hindware/Jaguar with a pair of G.I.or mild steel brackets complete with fittings such as including PVC syphonic appratus, mosquito proof lid of PVC union and coupling for connection with intet, outlet and over flow pipe including cutting holes and making good the same connecting the flush bend with cistern and closet complete (over flow pipe to be measured and paid for separately) as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in- Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

10.00 (Ten) litres capacity

5.00 (Five) litres capacity

Providing and fixing vitreous china wash basin Garnet No 10010 and size 55x40 cm ( fifty five into forty centimetre) without pedestial of Hindware/Cera/Jaguar star white/ snow white shade with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same with all fitting as per specifications, approved drawing including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china European type W.C. Matrix fixed with Jet Pressure of hindware/jaguar/cera of star white/ snow white shade for Divyang with integral P or S trap including jointing the trap with soil pipe (seat cover/ jet pressure to be measured and paid for separately) including entire carriage of material within all leads, lifts and other incidentals as per direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china wash basin Hindware/Cera/Jaguar for Divyang with double hole for pillar trap with C.I. or M.S. brackets including cutting hole in walls and making good the same including entire carriage of material within all leads and lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous china wash basin Garnet No 10080 and size 58x43 cm ( fifty eight into forty three centimetre) (under counter basin) of Hindware/Cera/Jaguar of star white/ snow white with double hole for pillar trap with C.I. or M.S. brackets painted white including cutting holes in walls and making good the same including entire carriage of material within all leads and lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) diametre C.P. brass waste (Heavy duty make) ISI marked NO-8931 & 8934) of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindustan series of Jal for wash basin or sink with in all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing Viterous china urinal large flat back no 60002 size (39x37.50x59 cm) (thirty nine into thirty seven point five into fifty nine centimetre) of Hindware/ Cera/ Jaguar of Star white/ snow white shade including connecting the urinal with waste pipe by means of white lead mixed with chopped hemp ( waste pipe to be measured and Paid for separately) including carriage of material within all leads, lifts of material and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. (Chromium Plated) jet sprey of continental series/clasic series/floral series of Jaguar/ Hindware/ Cera for Europen seat of approved quality and colour with 1.5m (One decimal five metre) tube including carriage of material within all leads, lifts and other incidentals as per specifcations, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing Division Plate for urinals 600x300 mm ( Six hundred into three hundred millimetre) of viterous china of Jaguar/ Hindware/ Cera including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing heavy quality stainless steel kitchen sink of approved standard ISI marked with drain board of Diamond/ Unik with C.P. waste pipe, C.I. or M.S. brackets painted white i/c cutting holes and making good the same of size 610x510 (six hundred ten into five hundred ten millimetre) with bowl depth 200 mm ( two hundred millimetre) including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 32mm (Thirty two millimetre) nominal size diameter rubber plug for wash basin, sink including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC Waste pipe for wash basin or sink including brass check net with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 600mmx450mm (six hundred millimetre into four hundred fifty millimetre) beveled edge mirror of superior glass of Modiguard/ Atul/ Golden Fish mounted on 6mm (six millimetre) thick A.C. Sheet or plywood sheet and fixed to wooden plugs with C.P. screws and washers including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass towel rail size 750x20mm (Seven hundred fifty into twenty millimetre) of continental series of Jaguar/Classic of Hindware/Cera/ floral series of Hindustan series of Jal with C.P. brass brackets fixed to wooden plugs with C.P. brass screws including entire carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing chromium plated brass soap dish of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindson series of Jal ESS with C.P. brass brackets fixed with cleats C.P. brass screws including carriage of material within all leads, lifts and other incidentals as per specifications, approved drawing as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 15mm (Fifteen milimetre) diameters C.P. brass bib tap of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindson series of Jal as per specifications including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing cansealed C.P. brass stop cock of continental series of Jaguar/ Classic series of Hindware/ Floral series of Cera/ Hindson series of Jal (heavy duty makes ISI marked ) 15mm (Fifteen millimetre) as per specifications including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing C.P. brass pillar tap Continental/Classic sreies /florol series of Jaguare/Hindware/Cera 15mm (fifteen millimetre) dia (Heavy duty makes ISI marked No. 8931 & 8934) as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 110x75 mm (One hundred ten into seventy five millimetre) size ISI marked PVC Floor Trap of self cleaning design including fixing with approved adhesive , cost of cutting and making good the wall and floor etcetra complete including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing casealed C.P. brass stop cock of Continental Series/Classic sreies /florol series of Jaguare/Hindware/Cera (Heavy duty makes ISI marked ) as per specifications including entire carriage of material within all leads and lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

15mm (fifteen millimetre) dia

20mm (twenty millimetre) dia

Providing and fixing 15mm (fifteen milimetre) C.P. Brass Angle valve of Continental Series/Classic sreies /florol series/ Hindson series of Jaguar/Hindware / Cera/ Jal as per specifications with nuts & bolts including carriage of material within all leads, lifts, and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing vitreous China pedestal of Jaguar/ Hindware/ Cera/ Jal for wash basin having recess at the back for the reception of pipes and fittings including carriage of material within all leads, lifts and other incidentals complete in all respect as per direction and satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing nominal bore/ diametre to wall ceiling and floor galvanised mild steel tubes of TATA steel/jindal (Hissar) (Heavy grade) tube fittings and clamps including making good the wall, ceiling and floor including cost and carriage of material with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

20mm (twenty millimetre) dia

15mm (Fifteen millimetre) dia

Providing and fixing 20mm (Twenty millimetre) nominal size diameters M.I. union ISI marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing G.I. nipples ISI marked with necessary screw including carriage of material within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

20mm (Twenty millimetre) nominal size diametre

15mm (Fifteen millimetre) nominal size diametre

Providing and fixing M.I. 20mm (Twenty millimetre) diametre 90° (Ninety) degree Plain Bend ISI Marked including within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 20mm (Twenty millimetre) diametre M.I. socket ISI Marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and Fixing M.I elbows 20mm (Twenty millimetre) diametre ISI Marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and Fixing M.I tees ISI Marked including carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

20mm (twenty millimetre) dia

15mm (Fifteen millimetre) dia

Providing and fixing polythene aluminium polythene ( PE-AL-PE) composite pressure pipe U.V. stabilized with carbon of KITEC confirming to IS 15450-2004 for water supply including clamps at one meter spacing, cutting fixing and making good the wall etcetra but excluding the cost of fitting internal work pipe exposed on wall 1620 complete including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing composit end seal compression fitting as per IS-15450-2004 for water supply including Tee, Albows, reducers/ connectors copluers and clamps with jointing testing and fitting complete including cutting and making good the walls etcetra complete including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Equal Tee (1620)

Reducing Tees (1620x all branch)

Female branch (1620x1620x20mm)

Female elbow (1620x20mm)

Male thread connector (1620x15 mm)

Female thread connector (1620x15 mm)

Reducer (1620x1216)

Coupler (1620)

Providing and fixing Plytheline – Aluminium - Polyethylene (PE-AL-PE) composite pressure pipe U.V. stabilized with carbon black confirming to IS-15450-2004 water supply including clamp at one metre spacing, cutting, fixing and making good the wall etc. but excluding the cost of fittings (internal work) pipes exposed on wall. Internal work-Exposed on wall.1216 (16 mm O.D. pipe) including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing composite end seal compression fittings as per IS-15450-2004 for cold water supply e.g. tees, elbows, reducers, connectors, couplers and clamps with jointing testing and fittings complete including cutting and making good the walls etcetra and entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Equal Tees ( 1216 )

Reducing Tee (1216 x all branches.)

Female branch ( TEE 1216 X 1216 X 15 mm thread)

Female elbows ( 1216 X 15 mm thread )

Male thread connector (1216 X 15 mm thread )

Female thread connector ( 1216 X 15 mm thread )

Reducers ( 1620 x 1216 )

Coupler (1216)

Providing and placing water tank of PVC (Poly venyl chloride) Sintex (Triple layer) ISI marked having capacity 1000 ( One thousand) litres each with necessary fitting including over flow pipes, scour pipe, ball valve and with cover locking arrangement of good quality including providing pads of sizes as required good quality all complete as per specifications including entire carriage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing PVC Clamps ISI Marked of approved design with steel screws and rawal plug etcetra complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm ( Seventy five millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

150 mm ( One hundred fifty millimetre) diametre

Providing and laying cement concrete 1:5:10 (One cement: Five sand: ten graded crushed/broken stone aggregate 40mm nominal size under PVC pipes cement concrete for bedding including necessary form work and curing complete.

150 mm (One hundred fifty millimetre) diametre PVC Pipe

100 mm (One hundred millimetre) diametre PVC Pipe

Providing and laying cement concrete 1:4:8 (One Cement isto Four Sand isto eight) graded stone aggregate 40mm (Forty millimetre) nominal size for haunching of pipes of the 150 mm ( One hundred fifty millimetre) internal diameters, necessary form work and curing complete within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Construction of manhole with R.C.C. top slab in 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres nominal size), foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed stone aggregate 40mm (Forty millimetre nominal size) inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand istoFour graded crushed stone aggregate 20mm (Twenty millimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetre) 1000mm (One thousand milimetre) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred ten milimetre) internal dimensions total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilogram) weight of cover 23Kg (twenty three kilogram) and weight of frame 15 Kg (Fifteen kilogram) with 300mm (Three hundred milimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm(Twenty milimetres nominal size), foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed stone aggregate 40mm (Forty milimetre nominal size) inside plastering 15mm (Fifteen milimetre) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty milimetre nominal size) finished smooth complete including curing and testing inside size 1200x900mm (Twelve hundred into nine hundred millimetre) 1000mm (One thousand milimetre) deep, including C.I. cover with frame (medium duty ) 500mm (Five hundred millimetre) interal diametre total weight of cover and frame to be not less than 38 Kg (Thirty eight kilogram) weight of cover 23Kg (Twenty three kilogram) with 300mm (Three hundred millimetre) thick walls of square rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate inclusive toll tax, GST and any other taxes imposed by the government.

Construction manhole with R.C.C. top slab in 1:2:4 (One cement: Two sand: Four graded crushed stone aggregate 20mm (Twenty millimetres nominal size), foundation concrete 1:4:8 (One cement isto Four sand isto Eight graded crushed stone aggregate 40mm (Forty millimetre nominal size) inside plastering 15mm (Fifteen millimetre) thick with cement mortar 1:3 (One Cement isto three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement isto Two sand isto Four graded crushed stone aggregate 20mm (Twenty millimetre nominal size) finished smooth complete including curing and testing inside size 800x800mm (Eight hundred into Eight hundred milimetre) 500mm (Five hundred milimetre) deep, including C.I. cover with frame (light duty single seal pattern–I) 450x610mm (Four hundred fifty into six hundred and ten milimetre) internal dimensions Total weight of cover and frame to be not less than 38 Kgs (Thirty eight kilogram) weight of cover 23Kgs(twenty three kilograms) and weight of frame 15 Kgs (Fifteen kilograms) with 300mm (Three hundred milimetre) thick walls of squared rubble masonry coursed with hard stone of approved quality in cement mortar 1:3 (one cement isto three sand) within all leads, lifts of materials and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 150mmx100mm (One hundred fifty millimetre into one hundred millimetre) size P or R type stone ware gully trap grade 'A' complete with C.I. grating, S.R. masonry in cement mortar 1:6 (One isto six)chamber and water tight C .I. cover with frame of 300mmx300mm (Three hundred millimetre into three hunded millimetre) size (inside). The weight of cover to be not less than 4.53kg (Four decimal five three kilogram) and frame to be not less than 2.78kg (Two decimal seven eight kilogram) complete within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing high pressure P.V.C spigot and socket soil, waste and ventilating pipe of Supreme/Finolex working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) I.S.I Marked including fixing with approved adhesive etcetra complete including carriage of material within all leads, lifts and other incidentals. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

75 mm (Seventy five millimetre) diametre

110 mm (One hundred ten millimetre) diametre

150 mm (One hundred fifty millimetre) diametre

Providing and fixing PVC Collar of Supreme/ Finolex and fixing with approved adhesiveISI Marked including cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150 mm ( One hundred ten millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

75 mm ( Seventy five millimetre) diametre

Providing and fixing PVC ISI Marked heal rest confirming to ISI No.-14735.99 inclusive cost and carriage of materials with in all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-In-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150 mm ( One hundred fifty millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

75 mm ( Seventy five millimetre) diametre

Providing and fixing PVC double Equal Branch with oval access door ISI Marked of Supreme/ Finolex with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150 mm ( One hundred ten millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

75 mm ( Seventy five millimetre) diametre

Providing and fixing PVC single Equal Branch with oval access door ISI Marked of Supreme/ Finolex with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra Complete including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150 mm ( One hundred ten millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

75 mm ( Seventy five millimetre) diametre

Providing and fixing PVC Plain Bend ISI Marked of Supreme/Finolex/Prince including fixing with approved adhesive etcetra Complete including carraigre of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

150 mm ( One hundred fifty millimetre) diametre

110 mm ( One hundred ten millimetre) diametre

75 mm ( Seventy five millimetre) diametre

Providing and fixing PVC door bend with oval access door ISI Marked of Supreme/ Finolex insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

150 mm ( One hundred fifty millimetre) dia

110 mm ( One hundred ten millimetre) dia

75 mm ( Seventy five millimetre) dia.

Providing and fixing PVC offset 45° (Forty five degree) ISI Marked of Supreme/ Finolex with insertion rubber washer 3 mm (Three millimetre) thick bolt and nuts complete including fixing with approved adhesive etcetra including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

110 mm ( One hundred ten millimetre) dia

75 mm ( Seventy five millimetre) dia.

Providing & Fixing water lifting pump ( Tolu pump ) of Havells / Usha / Crompton / Kirloskar 1.5 H.P centrifugal head range 6 - 25 (Six to Twenty) meter 20mm (Twenty millimetre) nominal bore making necessary connection, and fittings and accessories as required including carraige of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and fixing 455x610mm (four hundred fifty five into six hundred ten millimetre) light duty rectangular C.I. manhole with frame cover weight 38KG (thirty eight kilogram) (single seat) including entire carriage of material within all leads, lifts and other incidental, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Constructing brick masonry chamber for under ground inspection chamber and bends with common burnt clay building bricks in cement mortar 1:5 (one cement isto five sand) cover with frame (light duty) 355mmx610mm (Three hundred fifty five millimetre into six hundred ten millimetre) internal dimensions. Total weight of cover with frame to be not less then 38Kg. (weight of cover 23Kg. and weight of frame 15Kg), RCC top slab with 1:2:4 (one cement isto two sand isto four graded stone aggregate 20mm (Twenty millimetre nominal size) foundation concrete 1:5:10 (one cement isto five sand isto ten graded stone aggregate 40mm (forty millimetre) nominal size), In side plaster 15mm (fifteen millimetre) thick with cement mortar 1:3 (one cement isto three sand) finished smooth with floating coat of neat cement on wall and bed concrete etcetra complete. Inside dimension 455x610x450mm (Four hundred fifty five into six hundred ten into four hundred fifty millimetre). The rates are including cost and carriage of material within all leads, lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-In-Charge. Rate is inclusive of toll tax, GST and any other taxes imposed by the government.

Providing and laying ( to level or slope) of PVC 150 mm (One hundred fifty millimetre) of sewerage pipe of working pressure not less than 6.0 kg/cm2 (Six kilogram per square centimetre) of Fenolex/Supreme/Prince including filling the joints with approved adhesive complete including cost and carriage of material within all leads, lifts and other incidentals as per PWD specification and entire satisfaction/direction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

Providing and laying galvanized mild steel tubes (medium grade) 50mm (Fifteen millimetre nominal bore/ diametre) including all fittings of Jindal/TATA Steel including cariage of material within all leads, lifts and other incidentals, as per the direction and entire satisfaction of Engineer-in-Charge. Rate is inclusive of sale tax, toll tax, GST and any other taxes imposed by the government.

PARAS SOOD

M/S BALDEV KUMAR GOVT. CONTRACTOR

Ashwani Kumar