Strengthening of Road (Resurfacing of Service Road along 45.00M Wide Road From HCL Gate N0.1 in Sector-126 to FH-9 Sector-127) Noida

Construction of granular sub-base by providing close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density.Grade II

providing and applying tack coat using not straigtht run bitumen of grade 80/100 on bitumenous surface @ 0.50Kg/Sqm

providing and laying danse graded Bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading. Premixed with bituminous binder @4.5 percent by weight of total mix and filler, transporting the hot mix to work site, laying with Hydrostatic paver finisher with sensor contral to the required grade. level and alignment, rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction and density compaction as per MORTH specification, clause No.505 comlete in all respects.

providing and laying Bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading. Premixed with bituminous binder @5.4 percent of mix and filler, transporting the hot mix to work site, laying with Hydrostatic paver finisher with sensor contral to the required grade. level and alignment, rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction and density compaction as per MORTH specification, clause No.507 comlete in all respects.

Painting or Varnishing with Valsper or other Approved High Grade enamel or Super par synthetic clean varnish Complete one Coat over previously painted surface including supply of all material,labour,Tools & plants etc. required for proper Completion of the work. paint to be used should Confirm ISI no.105/106/133-1950 . As in Item (647) above but for Every Subsequent Coat on previously treated Surface. (37.00+24.00=61.00 per Sqm)

providing wall putty on new surface with approved quality material of berger/ Jk/ birla or similar make 2 coats

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two or more coats on new work

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work

Providing and laying bitumen mastic wearing course (as per specifications) with industrial bitumen of grade 85/25 conforming to IS : 702 prepared by using mastic cooker and laid to required level and slope including providing antiskid surface with bitumen precoated fine grained hard stone chipping of approved size at the rate of 0.005 cum per 10 sqm and at approximates spacing of 10cm centre to centre in both directions, pressed into surface protruding 1mm to 4mm over mastic surface, including cleaning the surface, removal of debris etc. all complete. ( Considering bitumen using 10.2% as per MORTH specification .) 40 mm thick