Loading…
Loading…
Tender Value
₹1.5 L
EMD Value
₹3,000
Closing Date
14 Jul 2026, 5:00 pm6d left
Executive Engineer
JS Division Dharampur Bharari
Deposit work SDF 2025 93 Restoration of rain damages to LIS Mandap in GP Tourjajar in Tehsil Dharampur Distt. Mandi HP SE of submersible pumping machinery at booster stage at Mandap.
2026_HPIPH_138103_1
4555-4604 Dated 04-07-2026
Open Tender
Pumps/Motors
90 days
Dharampur
Please refer Tender documents.
7 documents required · 7 mandatory
₹350
Executive Engineer
₹3,000
4 Jul 2026
4 Jul 2026
15 Jul 2026
4 Jul 2026
14 Jul 2026
4 Jul 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Supply of Submersible Pumping Set of Kirloskar/KSB/SU/Johnstion make comprising to latest relevant B.I.S. code. The Pump should be fitted with the bronze impeller of suitable alloys as per BIS 8034-376 with upto date ammendments suitable for clear water having greased packed bearing and shaft with wound stator on motor side and with shaft protection sleeve on pump side ensuring better life for shaft coupled to a submersible squirrel cage electric induction motor (water proof type) of required HP, RPM 2900/1450 of reputed make conforming to Kirloskar/Crompton/NGEF specification latest with upto amendments. The pump shall be fitted with a divice to take up expension of water with the heating of motor. The squirrel cage electric induction motor (Water-proof type of suitable H.P. motor of same make as that of pump confcorming to BIS-9287-1979 latest with upto date ammendments totally dust and water proof for submersible duty isolated from the pump by intermedaite casing with double mechanical seal in oil chamber and greased packed lubricated bearing and providing with stainless thurst bearing plate to with stand the vertical load with minimum wear and tear.It should also be fitted with a divice to take up expansion of water with the heating of motor. The pump should we include water level guards, erection clamps, cable clips and depth guage etc and suitable for operation on data given below:- | 2 | Set of 7.5 HP | 100 | ₹200 |
| 2SITE CONDITIONS:- Static Head 25.00 mtrs Discharge required 20 LPS each set. No. of Pump required. 2 Nos Location of the site of installation of machinery: The site is located at Chanouta a distance of 25 Km from Dharampur. The Altitude of :- The Altitude of place is 600 mtrs above MSL Type of Current:- AC three phase supply with RateVoltage:- 415+/-10% Type of water and its Charactristics of water a) Ambient b) Turbidity NTU NTU c) Hardness 260 Mg/Ltrs -- d) PH Value 5.00 HP -- e)Total Solid Mg/Lts)PH Value -- f) Other -- Static head in mtrs 19.00 mtrs. Length of R/main 200 mtrs Dia of Rising main 100 mm dia. No of working hours. 8 Hours. Limit of Pump (-) 15% (+) 10% of R. M.P. of Pumping 2900 RPM (or to be specified by the tenderer) Test run 16 Hours continueously for 7 days. | |||||
| 3 | Supply of MS. Angle iron steel sheet 16 SWG fabricated floor mounting closed (Almirah type) switch board comprising and capable of mounting the following accessories and with all internal electric connections, duly painted. The drawing of panel board shall be subject to approval of Engineer-in-Charge. | 1 | Each | 100 | ₹100 |
| 3.01 | Ammeter AC supply, 100 mm square type auto electric of AE/ L&T Rishab make of 15 Amp capacity for above motor with selector switches conforming to IS-1248 (Part - II)-1983 latest with upto date amendments. | 2 | Each | 100 | ₹200 |
| 3.02 | Voltmeter AC supply, 100 mm square type auto electric AE/ L&T Rishab make of 0 - 500 Volts range for above motor with selector switches conforming to IS-1248 (Part - II)-1983 latest with upto date amendments. | 1 | Each | 100 | ₹100 |
| 3.03 | ICTP switches with HRC fuses of Havells/L&T/standard /cromption make for required motor of 32 Amp. capacity and conforming to IS: 4064 (part - II)1978 latest with upto date amendments. | 2 | Each | 100 | ₹200 |
| 3.04 | Bus bar chamber having 3 copper bars of suitable rating for full length of 3 phases and one bar of half the rating of full length for neutral conforming to IS: 8084 –1976 and 11354-1985 read with 5578-1985 all latest with upto date amendmentsof suitable rating. | 1 | Each | 100 | ₹100 |
| 3.05 | MCB of suitable capacity of Havells/standard/MDS/Jyoti/Kilburn make to feed motors offered by the tenderer conforming to IS: 2516 (Part - II ) 1985 latest with upto date amendments with neutral linked under voltage release. | 1 | Each | 100 | ₹100 |
| 3.06 | 3 phase indicator lamps complete with toggle switches for individual motors conforming ti IS 3452 part I & II latest with up to date amendments of 15 watts. | 1 | Each | 100 | ₹100 |
| 3.07 | 50 mm dial Hour run meter of CEE / NEE make of suitable range as per relevant IS specifications. | 2 | Each | 100 | ₹200 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.56 MB
Form6.pdf
Tender Documents • 0.80 MB
Form8.pdf
Tender Documents • 1.28 MB
BOQ_204538.xls
BOQ • 0.29 MB
TC.pdf
Tender Documents • 0.12 MB
Download all tender documents and submit your bid