Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.5 LAccepted-AOC 270 ADARSH NAGAR ROORKEE HARIDWAR 247667 | HARIDWAR | UTTARAKHAND | 247667 | ₹10.5 L | L1 | Accepted-AOC Lowest Bidder |
| 2 | L2₹10.8 LRejected-Finance 67 NIRANJANPUR SAHARANPUR ROAD PO MAJRA DEHRADUN UK 248001 | DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | ₹10.8 L | L2 | Rejected-Finance Other than lowest |
| 3 | L3₹11.1 LRejected-Finance PLOT NO 4 NAYA GAON HARIPUR KANWALI P O SEEMADWAR DEHRADUN | DEHRADUN | UTTARAKHAND | 248001 | ₹11.1 L | L3 | Rejected-Finance Other than lowest |
| 4 | L4₹11.1 LRejected-Finance H NO 3927 SHAH COLONY SECTOR 8 NEAR NHPC COLONY SAILI ROAD TEHSIL DISTT PATHANKOT 145001 | PATHANKOT | PATHANKOT | PUNJAB | 145001 | ₹11.1 L | L4 | Rejected-Finance Other than lowest |
| 5 | L5₹11.2 LRejected-Finance 4 702 PURANA RAMNAGAR BHITTI RAMNAGAR VARANASI UTTAR PRADESH 221008 | RAMNAGAR | VARANASI | UTTAR PRADESH | 221008 | ₹11.2 L | L5 | Rejected-Finance Other than lowest |
| Sl No | Description | Qty | Unit | M/S C S AITHANI L6 | sweety pest control L3 | Bedi Refrigeration Works L2 | M/s Pradeep Kumar L4 | M/S MANISH KUAMR SINGH L5 | A.S. CONSTRUCTION COMPANY L1 |
|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from MoD land complete all as specified and as directed. | 140 | Sqm | 20 ₹2,800 | 20 ₹2,800 | 10 ₹1,400 | 11 ₹1,540 | 5 ₹700 | 10 ₹1,400 |
| 2.00 | Taking down cement plaster on brick or stone wall surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed. | 60 | Sqm | 20 ₹1,200 | 5 ₹300 | 10 ₹600 | 11 ₹660 | 5 ₹300 | 10 ₹600 |
| 3.00 | M&L for 25 mm thick PCC (1:2:4) type B0, (using 12.5 mm graded stone agg) as in sub base of floor complete all as specified and directed. | 80 | Sqm | 180 ₹14,400 | 150 ₹12,000 | 100 ₹8,000 | 111 ₹8,880 | 200 ₹16,000 | 110 ₹8,800 |
| 4.00M&L for coloured vitrified tiles of any design and pattern, double charged, 9 to10 mm thick, as in floor etc incl 15 mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption less than 0.05%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects and area of each is as following complete all as specified and directed :- Note: Shade of the tiles including Colour, design and pattern shall be got approved by GE/ AGE(I). | |||||||||
| 4.01 | Area of each tile exc 0.42 sqm but not exc 1.00 sqm. | 80 | Sqm | 1,280 ₹1.0 L | 1,100 ₹88,000 | 1,200 ₹96,000 | 950 ₹76,000 | 700 ₹56,000 | 955 ₹76,400 |
| 5.00 | Description same all as per item No. 4.00 but in riser of steps, skirting, dado and pillar etc over with and including over 10mm thick rendering in CM (1:3) complete all as specified and directed. | 9.5 | Sqm | 1,300 ₹12,350 | 1,100 ₹10,450 | 1,200 ₹11,400 | 1,150 ₹10,925 | 700 ₹6,650 | 955 ₹9,072.50 |
| 6.00 | M&L for Wall Cladding tile 7-8mm thick area of each tile exc 0.10 sqm but n.exc 0.20 Sqm of colour and pattern as approved by GE set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering on wall in CM 1:4 and surface finished even & fair Complete all as specified and s directed. | 150 | Sqm | 900 ₹1.4 L | 800 ₹1.2 L | 1,000 ₹1.5 L | 800 ₹1.2 L | 700 ₹1.1 L | 800 ₹1.2 L |
| 7.00 | M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed. | 55 | Sqm | 200 ₹11,000 | 180 ₹9,900 | 150 ₹8,250 | 160 ₹8,800 | 150 ₹8,250 | 180 ₹9,900 |
| 8.00 | M&L for 10mm thick plaster in CM 1:3 on roof, chajja and roof parapet finished even and smooth without using extra cement etc complete all as specified and directed. | 5 | Sqm | 300 ₹1,500 | 220 ₹1,100 | 300 ₹1,500 | 240 ₹1,200 | 150 ₹750 | 150 ₹750 |
| 9.00 | M&L for preparation of newly plastered surfaces on wall and applying two coats of oil emulsion distemper over one coat of wall primer over and including 1mm thick Birla/ JK wall care putty on plastered surfaces of wall complete all as specified and directed. | 55 | Sqm | 80 ₹4,400 | 100 ₹5,500 | 80 ₹4,400 | 90 ₹4,950 | 50 ₹2,750 | 45 ₹2,475 |
Updated dates
Tender Value
₹16.9 L
EMD Value
₹33,854
Closing Date
8 Dec 2025, 6:00 pmClosed
CWE Hills Dehradun
HQ CWE Hills Mall Road Dehradun Cantt 248003
PROVISION OF FALSE CEILING AND WALL PANNELING IN CORRIDOR OF ADMIN BLOCK (BLDG NO P-01. P-02 AND P-04) AND ALL IDAS CHAMBERS AT PCDA (AF) DEHRADUN
2025_MES_738784_1
85451/CLT/E8
Open Tender
Civil Works
150 days
GE Clement Town Dehradun
Class E Cat a (i)
6 documents required · 6 mandatory
₹500
Yes
GE Clement Town
₹33,854
Yes
3 Feb 2026
7 Nov 2025
16 Dec 2025
7 Nov 2025
8 Dec 2025
25 Nov 2025
Amount
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises from MoD land complete all as specified and as directed.
Taking down cement plaster on brick or stone wall surfaces including raking out joints, hacking for key and scrubbing down with water complete all as specified and as directed.
M&L for 25 mm thick PCC (1:2:4) type B0, (using 12.5 mm graded stone agg) as in sub base of floor complete all as specified and directed.
M&L for coloured vitrified tiles of any design and pattern, double charged, 9 to10 mm thick, as in floor etc incl 15 mm thick screed bed in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles. Tiles shall be confirming to IS-15622:2017, Group B1b with average water absorption less than 0.05%. Length, width and straightness of sides + 0.10% (Max deviation). Thickness + 4.0% (Max deviation). Centre & Edge curvature and warpage + 0.20% (Max Deviation). Breaking strength 1200 N (Minimum) and minimum 95% tiles shall be free from visible defects and area of each is as following complete all as specified and directed :- Note: Shade of the tiles including Colour, design and pattern shall be got approved by GE/ AGE(I).
Area of each tile exc 0.42 sqm but not exc 1.00 sqm.
Description same all as per item No. 4.00 but in riser of steps, skirting, dado and pillar etc over with and including over 10mm thick rendering in CM (1:3) complete all as specified and directed.
M&L for Wall Cladding tile 7-8mm thick area of each tile exc 0.10 sqm but n.exc 0.20 Sqm of colour and pattern as approved by GE set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering on wall in CM 1:4 and surface finished even & fair Complete all as specified and s directed.
M&L 15mm thick rendering in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.
M&L for 10mm thick plaster in CM 1:3 on roof, chajja and roof parapet finished even and smooth without using extra cement etc complete all as specified and directed.
M&L for preparation of newly plastered surfaces on wall and applying two coats of oil emulsion distemper over one coat of wall primer over and including 1mm thick Birla/ JK wall care putty on plastered surfaces of wall complete all as specified and directed.
M&L for preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed. Note :- The newly plastered surface must be prepared in a manner so that there should not be any impression of dent and it should be made even and smooth all as per satifaction of Engr-in-Charge.The cost of all materials, T&P and labour required for preparation of surface are deemed to be included in the rates quoted.
M&L for preparation of old surface by brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of acrylic distemper on wallcomplete all as specified and directed .
M&L for preparation of old painted surface of wood and wooden based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.
S&F 6mm thick PVC heavy grade hollow profile designer sheet strips & channel feathered at edges of approved quality and design PVC Wall/Ceiling lining fixing with frame including all beading, matching PVC angles at all window corners with all necessary frame as required complete all as specified and directed.
S&F false ceiling with Semi perforated 12mm thick Micro Tegular edged GRG False Ceiling tiles at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595 x 595mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Nomocombustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120grams per Sqm incliuding both sides) comprising of main-T runners of size 15x32mm of length 3000mm, cross-T of size 15x32mm of length 1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600mm, suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per Sqm) i.e. 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod up to 2000 to mm length and L-shape level adjuster os size 85x25x2mm. Galvanized iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450mm centre to centre and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as directed.
M&L for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc incl welding,grinding, buffing,polishing and making curvature(where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories and stainless steel fasteners, bolts etc of required size on the top of the floor or the side of the waist slab with suitable arrangement complete all as specified and directed.
One 3pin/5pin 5/6 Amps socket out let on same board with other switches , with cables 1.5 sq mm size , complete all as specified and directed.
One 3pin/5pin 5/6 Amps socket out let on independent board with other switches, with cables 1.5 sq mm size, complete all as specified and directed .
All as per item No 16 above but with 2.5 Sqmm PVC insulated FRLSH cable for 15 Amps power point complete all as specified and directed..
S & F Switch Modular single pole, one way 6 Amps, 1 module 240 Volts AC complete all as specified and directed.
S&F switch modular , one-way 16Amps, 1 module 240 Volts AC all as specified and directed.
S&F modular socket, 6A -2/3 pin combined 2 module ISI marked 230 volts, 50 Hz complete all as specified and directed.
S&F modular socket, 6A/16A -2/3 pin combined 2 module 230 volts 50 hz complete all as specified and directed.
S&F ceiling rose surface bakelite 65x25mm dia having three terminals ISI marked all as specified and directed.
S&F batton/angle holder insulated body with back plate, suitable for batten fittings complete all as specified and directed.
S&F in repair energy efficient LED lights fitting, 18 /20 watt , 230 Volt, LED tube light connecting up with with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified & as directed.
S&F round shape 6 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.
S&F sheet metal enclosure double door type for MCBs DB SPN(Single pole and neutral) 240V AC 8 way with 200 Amps rated bus bar all complete all as specified and directed.
S&F MCB SP 5 to 32 Amp 'B' series 10 KA repturing capacity complete all as specified and directed.
S&F MCB SPN 40 Amp 240 V AC 10 KA repturing capacity all as specified and directed.
S&F sub main wiring two single core 4 sq mm PVC insulated unsheathed multi stranded copper conductor cable ( FRLSH ) 1100Volts grade drawn in & including rigid PVC conduit 20mm dia or more medium grade surface/ concealed in wall as per existing along with 4.00 Sq mm PVC insulated unsheathed copper conductor cable (FRLSH ) as earth wire and wire connected with main earth dolly including cutting chasing and making good disturbed portion all as specified and directed Note:- Two runs of multi stranded copper conductor cable and one run of earth wire including PVC conduit will be measured as a one length.
Bedi Refrigeration Works (BID ID -3486756)
sweety pest control (BID ID -3486727)
M/s Pradeep Kumar (BID ID -3491933)
M/S MANISH KUAMR SINGH (BID ID -3486284)
M/S C S AITHANI (BID ID -3486412)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.34 MB
BOQ_827236.xls
BOQ • 0.27 MB
Tender85451.pdf
Tender Documents • 1.33 MB
Download all tender documents and submit your bid