Electrification to the Dr.Krishnan Park near mission school in Palakkad Municipality (Retender)

Amount

Supply and wiring points using rigid PVC conduit of 20 mm with specials, duly clamped or concealed suitably and with 1.00 sq mm FRLS PVC insulated stranded single core copper conductor cable 650V grade, including providing switch board main and continuous earthing with No.14 SWG bare copper,required quantity of copper earth socket, brass bolt and nut crimping etc.complete with suitable size modular type metal switch boxes, modular type front plates (white) etc.up to and including 6A modular type SP switches and making good the surface of wall, colour washing etc. complete as required.

Single Control light point with 6A,3 plate ceiling rose - Short point (90.2.1.1 )

Single Control light point without ceiling rose - Short point (90.2.1.3 )

Single control ceiling fan point with 6 A, 3 plate ceiling rose & with socket size stepped electronic regulator. - Short point (90.2.1.4)

Combined plug point with 6 A, 5 pin plug socket controlled by 6 A switch in the same switch board as that of light points. (90.2.1.6)

Supply, conveyance installation testing and commission -ing the light fittings of following types complete with all accessories and lamps etc. directly on wall using 2 nos. flat iron brackets made from 25x6mm flat iron, painting the flat iron bracket and giving connections with required length of 16/0.20mm 3core copper conductor flex wire etc.as required.

1200 mm 1X20W LED Lamp with box type fixture. (90.3.22.3)

Supply and fixing cast aluminium stove enamelled bulk head fitting with deep drawn anodised aluminium body,epoxy powder coated,heat resistant prismatic glass cover suitable with 7w LED bulb to wall/ceiling including giving connections with required length of 16/0.20mm PVC insulated 3 core round copper conductor flex wire conforming to to relevant ISS or extending the original wiring and making good the surface as required.(od15213/2019_2020)

Supply and fixing angle / straight brass lined skirt type, bakelite batten holder with 200mm Plastic shade and 7 W LED lamp and giving connection etc as required. (od15215/2019_2020)

Supply,conveyance,installation,testing and commissioning of ceiling fans of the following sizes using standard accessories, wiring the down rod with 16/0.20mm PVC insulated and PVC sheathed 650/1100V grade 3 core round copper conductor flex wire etc.as required.

1200mm sweep - 5star rated ceiling fan complete with 300mm down rod,canopies, shackeles etc. working on 230V/240V single phase A/C (90.4.5.2)

Supply and installation of suitable size MS rod type fan clamp in the RCC slab as per IS 732 as required.(90.4.1)

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. 20 mm.(90.6.10.1)

Supply and drawing 650/1100 V grade FRLS PVC insulated stranded single core copper conductor cables conforming to IS 694 part I 1990 in the existing surface / recess conduit as required including giving necessary connections of the following sizes.

1.50 sq.mm 2 Run (1.17.2)

2.50 sq.mm 2 Run (1.17.11)

Supplying and fixing following size/ modules, GI box along with modular base & cover plate for modular switches in recess etc. as required. 3Module (100mmX75mm) (1.27.2)

Do - 8 Module (125mmX125mm) (1.27.5)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.6 pin 15/16 amp socket outlet.(1.24.5)

Do - Do - 15/16 amp switch. (1.24.3)

Do - Do - 3 pin 5/6 amp socket outlet. (1.24.4)

Do - Do - 5/6 amp switch. (1.24.1)

Supply and installation of sheet steel, phosphatised and painted,dust and vermin proof enclosure of MCB DB including copper /brass bus bar,neutral link, earth bus and DIN rail suitable for fixing MCB/ isolator etc. fixed on wall using suitable anchor bolts or fixed in recess including cutting hole on the wall, making good the damages, colour washing etc.as required. 4way (8+12) - double cover TPN vertical DB with provision for fixing 4P MCB / Isolator/ RCCB/ RCBO as incomer and SP/ TP MCB as outgoing (IP 42/43) (90.11.1.14)

Supplying and fixing following way, single pole and neutral,sheet steel, MCB distribution board,240v,on surface/ recess,complete with tinned copper bus bar, neutral bus bar,earth bar,din bar,interconnections,powder painted including earthing etc.as required.(But without MCB/ RCCB/ Isolator,12way Double door.(2.3.3)

Do - 6 way, Double door.(2.3.1)

S&F 4 Pole enclosure MCB DB sheet steel phosphatised , painted, dust and vermin proof on surface/ recess etc. as required. (od121450/2019_2020) for fountain motor panel.

Do - DP enclosure MCB DB sheet steel phosphatised, painted, dust and vermin proof enclosure on surface/ recess complete with connections,testing and commissioning etc.as required. (od121452/2019_2020) In the motor Starter panel board.

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 40 amps 4 pole isolator (2.13.1 )

40 amps 2 pole isolator 2.12.1)

Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 30/100 milliamperes in the existing MCB DB complete with connections, testing and commissioning etc. as required 25/32 A rating, 4 pole RCCB, 100/30mA (2.15.1)

25A rating, 2 pole RCCB, 30 rnA (2.14.1 )

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 6 A. to 32 A. ratings , SP MCB, "C" curve,10 kA breaking capacity. (2.10.1 )

Do - 6 A. to 32 A. ratingsTP MCB, "C" curve,10 kA breaking capacity. (2.10.4 )

Supply and providing and fixing 32A TPN disconnector fuse switch unit in sheet steel enclosure with ISI marked HRC fuses on wall/angle iron frame including drilling holes in frame, making connections etc.as required.

Supplying and Fixing 24 Hour timer for operating ON-OFF function in the existing MCB DB/enclosure with connection testing commissioning etc as required. (od567930/2019_ 2020)

Supplying and fixing 32A 2Pole AC1 Power contractor in 1the existing MCB DB/enclosure complete with connections, testing and commissioning etc. as required. (od567931/ 2019_ 2020)

Supply installation testing and commissioning of High Mast using Octogaonal Pole made single/two sections of hot dip galvanised GI sheet 70mm top diameter, 130mm bottom diameter thickness 3mm base plate dimensions of 200x200x16 mm suitable for wind speed as per IS 875 Part III with head frame assembly two point suspension system with steel wire rope 5mm dia double drum winching system w and including round arm galvanized luminary carriage suitable to install 6/8 nos luminaries in symmetrical arrangement control gear box and lighting spikes with single phase operation power tool installed inside the base compartment including connector foundation bolt 4 nos fixed in existing RCC foundation and junction box etc, complete 10 Meters. (90.15.2.2)

Supply Conveyance, installation, testing and commissioning of 120W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection LED Chip make Cree/Lumilled/Nichea with power factor greater than 0.95 at full load, internal surge protection up to 8 KV,and Aluminium pressure die-cast Powder coated housing, acrylic cover complete with THD less than 10%, power factor greater than 0.98, RoHS compliant, duly wired up for use on 230 V AC supply. Driver compartment should be seperatly accessible for maintenance (LM 79&80 certificates from NABL accredited Third party lab to be produced mentioning chip manufacturer) (90.15.4.8).

Do - 100W LED Flood light output greater than 105lumen/W 4000-6000 K with IP 66 protection - Do - (90.15.4.7)

Earth work excavation in ordinary soil and depositing with a lead up to 50m and lift upto 1.50m including banking. (for foundation earth work 0.90x0.90x2m size)

Cement concrete 1:2:4 using 20mm (nominal size} broken stone for reinforced concrete work.(for foundation concrete 0.55x0.55x2m size)

Reinforcement for R.C.C works,bend tied and placed in position( plain grill requiring bend cold) using for steel ( for foundation reinforcement 14mm,8mm tor steel)

Plastering with cement mortar 1:4. 12mm thick one coat.

Form work for reinforced cement concrete in slabs including wooden planks,joists,bamboo posts and labour for taking down after completion of work.(Hire and labour charges only)

Fabrication, supply, conveyance, installation testing and commissioning of floor or wall mounting, dust and vermin proof, cubicle type MV panel board comprising of the following components/ devices & complying to IS 8623.<br>Fabrication of fully partitioned, dust and vermin proof enclosure for panel assembly as per form 4 of IS 8623 (with latest amendments) using CRCA sheet as per approved design and requirement, with front and rear access facility, bus bar chambers, hinged doors for all switch gear compartments, earthing the doors using 4 sq mm braided copper conductor, providing necessary cut-outs for mounting meters, relays, indication lamps, bus bar interconnection etc, detachable covers for bus bar chamber and cable alley, powder coating the assembly after subjecting to 7 tank process etc as required. CRCA sheet alone be used for the fabrication. Angles/ flats/ slotted angles etc shall not be used for the fabrication of panel assembly. The measurments will be taken the area of the complete sheets used for panel board including partitions, folding, shrouding etc.Supply and fabrication of MV panel board using 2.00mm CRCA sheet, powder coated (excluding base frame)(90.14.1.1)

Supply and providing heavy duty 'A' section neoprene gasket in the panel boardA' section neoprene beeding suitable for 1.60/ 2.00 mm sheet. (90.14.3.1)

Supply and fabrication conveyance and installation of angle iron frame work for wall mounting panel board. (90.14.5)

Carrying out control wiring for panel 2.50 sq mm single run with required sockets. (od567932/2019_2020)

Carrying out control wiring for panel 4.00 sq mm single run with required sockets. (od567934/2019_2020)

Providing and fixing following capacity DP SDF disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel making connections etc as required up to 32 Amp DP SDF. (od568086/2019_2020)

Supply and drawing 3 core 2.5 sq. mm. multi-core PVC insulated & PVC sheathed 650/1100 V grade copper conductor round flexible cables conforming to 1S 694 part I 1960 in the existing surface / recess conduit as required. (90.6.5.12)

Supply of superior quality copper reducer (banana) cable socket and making core termination of cables of the following sizes including crimping ete. as required. 2.5sqmm. (90.12.24.1)

Supply, laying and clamping of 1No. 2 core 6 sqmm PVC insulated and PVC sheathed armoured aluminium power cable,1.1 KV grade with factory made clamp,spacing of clamps not exceeding 60cms, making good the damages,colour washing etc.as required. (90.12.7.2 )

Do - 2 core 10 sqmm (90.12.7.3 )

4 core 10 sq mm with factory made clamp - Do - (90.12.7.40 )

4 core 16 sq mm with factory made clamp - Do - (90.12.7.41 )

Supply & laying of one number PVC insulated and PVC sheathed armoured aluminium power cable of 1.1KV grade of the following sizes in the existing RCC/ HUME / STONE WARE/ GI/ DWC pipe as required.2 core 6 sq mm. (90.12.5.2)

Do - 2 core 10 sqmm (90.12.5.3 )

4 core 10 sq mm with factory made clamp - Do - (90.12.5.40 )

Supply & laying of DWC pipe in ordinary soil 0.75m below ground level including excavation 50/38 mm or nearest size (90.12.10.2)

Supply and drawing FRLS PVC insulated & sheathed 650/1100 V grade 3 core copper conductor flat cable for submersible pump motor conforming to IS 694 part I 1990 as required including giving necessary connections of the following sizes. 4sq mm.(90.6.6.3)

Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 core 6 sq. mm (19mm) (9.1.1)

Do - 2 core 10 sqmm (19mm) (9.1.2)

Do - 4 core 10 sq mm (25mm) (9.1.32)

Do - 4 core 16sq mm (28mm) (90.12.5.40 )

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2 metre long etc. with charcoal/coke and salt as required. (od8860/2018_2019)

Providing and fixing 25mmx3mm G.I strip earth lead from the test joint to the earth plate. (od8861/2018_2019)

Providing and fixing testing joint, made of 2 X 25 mm X 3 mm thick G.I. strip, 30 mm long, with 2 nos. of brass. bolts, nuts, chuck nuts and spring washers etc. complete as required.(od4503/2019_2020)

Supply and drawing bare earthing conductors of the following sizes along with wiring/ cables and giving connection as required. 2.00 copper conductor.(14SWG) (90.16.1.1)

Do - 3.15 mm copper conductor (10 SWG) (90.16.1.3)

Suppl and laying of 15mm B class GI pipe(medium class) with all required accessories laid 0.6m below ground level including excavating trench of suitable size and refilling etc.as requiredas protective covering to earth leads. (90.16.2.1)

Supply of superior quality copper earth socket for the following size of earth conductor including crimping etc. as required.2.00 mm (14 SWG) (90.16.5.1)

Do - 3.15mm copper earth socket and including crimping etc. as required. (90.16.5.3)

Supply and providing12x3mm brass nut and bolt etc.as required.(od21888/2019_2020)

Do - 25 x 6 mm brass nut and bolt etc.as required. (od20879/2019_2020)

Supply & installation of dust and vermin proof, 3 Phase Sintex Meter Board( GS-MB- 5628 (515 x 240 x145) including p/f 3 Nos 32/40 A HRC Fuse Base with HRC Fuse link ,32/40 A neutal link and to fix KSEB meters, etc as required including fixing it on wall, making good the damages colour washing etc.as required. (od21904/2019_ 2020)

Supply and fixing of following sizes of light gauge PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.32 mm (90.6.10.3) For Srevice Pipe.

Supply and providing M8 anchor bolt hook in wall / parapet for binding support for service main.

M K V Engineering