Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.1 LAccepted-AOC | L1 | Accepted-AOC L1 | |
| 2 | L2₹6.4 L+₹29,275 (4.77%)Rejected-AOC | L2 | Rejected-AOC L2 | |
| 3 | L3₹6.6 L+₹44,120 (7.19%)Rejected-AOC | L3 | Rejected-AOC L3 | |
| 4 | L4₹6.7 L+₹56,967 (9.29%)Rejected-AOC VALIYA VEED THRIKKAKARA P O LSGD THRIKKAKARA MUNICIPALITY KAKKANAD | THRISSUR | KERALA | 680667 | L4 | Rejected-AOC L4 |
Tender Value
Refer Docs
EMD Value
₹17,800
Closing Date
5 Feb 2021, 6:00 pmClosed
CEO
MYTHRI BHAVAN KAKKANAD
sorting and grading shed at Edakattuvayal in Ernakaulam
2021_VFPCK_409320_1
vfpck/A09/ENGG/249
Open Tender
Civil Works - Others
Item Rate
45 days
Edakattuvayal
Please refer Tender documents.
4 documents required · 4 mandatory
₹1,500
Yes
₹17,800
Yes
1 Mar 2021
28 Jan 2021
9 Feb 2021
28 Jan 2021
5 Feb 2021
28 Jan 2021
Amount
DSR 2.7.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50m and lift up to 1.5m, disposed earth to be levelled and neatly dressed all kind of soil.
DSR 7.1.1 Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20mm nominal size) up to plinth level with : cement mortar 1:6(1 cement : 6 coarse sand )
OD Filling with contractor's own earth (excluding rock) in open areas in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in charge.
DSR 4.1.8 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand(zone-III) : 8 graded stone aggregate 40 mm nominal size).
DSR 4.1.3 1:2:4 (1 Cement : 2 coarse sand(zone-III) : 4 graded stone aggregate 40 mm nominal size).
DSR 5.22.6 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Thermo-Mechanically Treated bars of grade Fe-500 D or more.
DSR 5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers.
OD 50.6.2.3 Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure above plinth level up to floor five level with thickness 15cm in: CM 1:6 (1 cement : 6 coarse sand) etc complete
DSR 13.1.1 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4
DSR 13.43.1 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : Water thinnable cement primer.
OD 91 Steel work in built up tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.( Hot finished seamless type tubes)
DSR 12.50 Providing and fixing precoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm ( + 0.05 %), total coated thickness with zinc coating 120 gm per sqm as per IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
OD Supplying and fixing 150mm dia PVC rain water gutter semi circular section including fitting with 32mx5m MS flat supporters at 1m interval etc. complete
DSR 17.2.1 Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings andfixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid
OD 35 mm thick factory made Solid panel PVC Door shutter and frame made out of single piece extruded solid PVC profiles, 5 mm (± 0.2mm) thick, having styles &rails (except lock rail) of size 95 mm x 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner.
OD Providing and fixing PVC pipes including fixing the pipe with clamps/ clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 mm dia 4Kgf/cm2 -External work - Exposed on wall
OD Providing and fixing PVC moulded fittings / accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 110 mm dia Door Elbow
OD Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 63 mm dia 6Kgf/cm2
Supplying and fixing 110mm PVC floor trap
DSR 17.7.3 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps.
DSR 18.48 Supplying and fixing 500 litres capacity syntex overhead water tank (over the R.C.C slab) with cover
Providing and fixing PVC pipes including jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20 mm dia 10Kgf/cm2
DSR 9.48.1 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc
Supplying and fixing Precast RCC septic tank with soak pit including the cost of earthwork excavation, filling, testing and commissioning etc.20 usage capacity
Providing and fixing 2 nos LED bulb, 1 nos wall mounted fan 2 nos 6amp switch switch including wiring switch board and labour as per the direction from engineer in charge.
Providing and fixing false ceiling with 7.5mm thick PVC plain panel board ceiling of approved quality in aluminium frame work with necessary screws etc complete as per the direction in engineer
ABHIJITH MANI KALLUVELIL
Jass Associates
K A MEEDIAN
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_581714.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .