T-Max Inserts Sandvik Part No. 175 32 301940 25 M 3015, WIDIA Part No. LNUX 301940 Grade TN 2000 INDICARB PART No. LNUX 301940TT 2500 or Equivalent. Minimum turn of 45 wheel sets per insert in practical trial . ( Only OEM or Authorized Dealer Accepted ).(Trail Run is required at Inspection Stage) Warranty period: 30 month from the date of supply.".

Special Eligibility Criteria

1. 1

   BULK ORDER: Bulk Order (Bulk Order is defined as minimum 80 % of net procurable quantity in a tender) shall be ordered on established sources having proven past supply performance as define below. For placement of bulk quantity order, the manufacturer firm must have successfully supplied minimum 20 % of the tendered quantity of the tendered item/Drawing/specification in a single purchase order or contract of Zonal Railways/ PUs/CORE during the period of three previous completed financial year and current financial year up to date of tender Closing. Successful supply shall mean acceptance of supply by consignee. (1b) DEVELOPMENTAL ORDER ON THE BASIS OF PAST PERFORMANCE: If such past supply performance level is lower than as required for bulk order (i.e.minimum20%), then the offer may be considered for placement of developmental order not exceeding to 20% of the net procurable quantity. For establishing above past Supply Performance (1a & 1b above), firms should submit documentary evidence certifying proof of supply performance, which shall be scanned copies of receipt notes or inspection certificates along with self-declaration by the bidder that supply has been accepted by consignee, Furnishing of false declaration shall render termination of contract and further action as per terms and conditions of contract or Consignee Receipt & Acceptance Certificate or Consignee Receipt Note or Supply Performance issued by Gazetted Officer of consignee along with offer. (1c) DEVELOPMENTAL ORDER ON THE BASIS OF OTHER CREDENTIALS: The tenderer who have no past performance as above may also be considered for such developmental order not exceeding 20% of the net procurable quantity), but for consideration of such offers, Tenderers must be able to demonstrate their Capacity cum Capability to manufacture the tendered item. For this, tenderer must submit the details of M&P, testing facility, QAP the details of M&P, testing facility, QAP and ISO 9000 / 14000 / 18000 certificates if available, technical manpower available with them registration with other Government agencies or PSUs etc. or any other details as may be warranted as per the technical specification and drawing. Tenderers are to note that non submission of the documents to establish their eligibility for (1a) or (1b) or (1c) shall be taken as they are not having any such documents. Their offer shall be considered based on whatever documents are submitted by them with the offer and no back reference in this regard will be made to them.

   Document requiredConfirmation required
2. 2

   ONUS OF SUBMISSION OF REQUISITE DOCUMENTS: The onus of submission of requisite documents as given above for establishing their eligibility for bulk or developmental order lies with the tenderer. Tenderers are to note that non submission of the documents as detailed above shall be taken as they are not having any such documents. In case the tenderers do not submit the requisite documents as detailed above along with their e-offer, for stock items WCR reserves the right to decide the tender on the basis of their past supply performance records as per IMMS history sheet of WCR for the tendered item. In case of non-stock items, WCR reserves the right to decide the tender on the basis of WCR vendor performance available in IMMS for the tendered item. No back- reference in this regard will be made with the bidder

   Confirmation required
3. 3

   TENDER SPECIFIC AUTHORIZATION: - Authorized agents of OEM must submit Tender Specific Authorization of the OEM. No back reference will be made in this regard & communication received after opening of tender will also not be entertained. The material supplied by the traders will be inspected at the OEM premises by the inspecting agency before supply. Neither one agent can represent two OEMs nor can one OEM authorize two agents. Purchaser reserves the right to reject both bids in such cases. In a tender either the Agent on behalf of the OEM or OEM itself can bid but both cannot bid simultaneously for the same item in the same tender. In cases where both OEM and their agent participate in bidding for same item, any or both the bids shall be liable to be rejected

   Document optionalConfirmation required

Commercial-Compliance

1. 1

   Code of Integrity, Misdemeanor and Penalties :- I/We have carefully gone through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". I/We hereby certify that none of our sister concern or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender which can give rise to a conflict of interest or fall under anti-competitive practices. We understand that the offers of all such sister concern or affiliates including ours are liable to be rejected as per relevant provisions of IRS terms and conditions. I/We, affirm that we shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. I/We understand that we are fully responsible for the above declaration and it shall not be the Railway's responsibility to verify the same. I/We are aware that we shall be liable for all consequences of violation of Code of Integrity, if detected, at any stage. (Note: - May confirm as Yes , to certify all the above certification . )

   Confirmation required
2. 2

   (ii)Code of Integrity, Misdemeanor and Penalties :-In case your confirmation in commercial compliance regarding Code of Integrity, Misdemeanor and Penalties is "No", then provide/upload the names and addresses of your sister concerns or affiliates .

   Document optional
3. 3

   Jurisdiction of Court :- As per Para 2703 of IRS Condition of Contract the Courts of the place from where the acceptance of tender has been issued shall alone have jurisdiction to decide any dispute arising out of or in respect of the contract.
4. 4

   Order shall be restricted to class-I local suppliers only and the venders who do not qualify to be class-I local suppliers should not quote in the tender as their offer shall not be considered for any ordering.

   Document optionalConfirmation required
5. 5

   Offers with longer delivery period against the stipulated delivery period in the tender shall be treated as non- responsive & are libel to the Passover in the interest of the railway.

   Confirmation required
6. 6

   Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.

   Document optional

General Instructions

1. 1

   Firm has to read delivery period carefully before submitting the offer.
2. 2

   Firm has to read and quote warranty clause carefully while submitting Offer Otherwise offer may be ignored.
3. 3

   Firm has to clearly mention complete address of inspection place in offer.

1. 1

   Code of Integrity, Misdemeanor and Penalties :- Bidders are reminded to carefully go through the IRS conditions of contract (included and uploaded along with the bid document) particularly Para 2500 pertaining to "Code of Integrity, Misdemeanor and Penalties". Bidders shall certify that none of their sister concern or affiliates (such as having common partner/director/promoter/owner/holding company decision control etc.) have participated in this tender & which can give rise to a conflict of interest or fall under anti-competitive practices.The offers of all such sister concern or affiliates if quoted are liable to be rejected as per relevant provisions of IRS terms and conditions. Bidders shall abide by the Code of Integrity in general, with specific reference to conflict of interest [Para 2502 (e)], anti competitive practices [Para 2502(c)] and obligation to proactive disclosures [Para 2503]. Bidders shall fully responsible for the declaration/certification regarding Code of Integrity, Misdemeanor and Penalties given in commercial compliance and it shall not be the Railways responsibility to verify the same. Bidders shall be liable for all consequences of violation of Code of Integrity (including termination of contract) as per provisions in Para 2505 & 2506 of IRS conditions of contract , if detected, at any stage.