GENERAL AMC 2023 24 Maintenance of various LI Schemes in Chengamanadu area under Electrical L I Section Aluva. General Electrical Work

Amount

Lifting

OD204523/2023-2024: Lifting the 1 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD204526/2023-2024: Lifting the 5 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD204525/2023-2024: Lifting the 25 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD204521/2023-2024: Lifting the 50 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD204520/2023-2024: Lifting the 80 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

OD204519/2023-2024: Lifting the 100 HP motor after disconnecting the wire connection, decoupling the pump, detaching from the base plate, starters, TP switches etc. and placing them conveniently on the platform.

Lowering/Refitting

OD204544/2023-2024: Lowering down and erecting upto 1HP motor/vacuum motor pump set and erecting the motor on the base plate in position giving connections checking correct alignment and trial run on full load

OD204542/2023-2024: Lowering down and erecting 5HP motor and erecting the motor on the base plate coupling with pump in position giving connections checking correct alignment and trial run on full load

OD204541/2023-2024:Lowering down and erecting 25 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD204539/2023-2024:Lowering down and erecting 50 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD204538/2023-2024:Lowering down and erecting 80 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

OD204537/2023-2024:Lowering down and erecting 100 HP motor, starter and other electrical accessories,( Accessories when necessary ) and erecting the motor on the base plate coupling with pump, erecting the starter regulator TP switch etc in position giving connections checking correct alignment and trial run on full load

other maintance

OD218892/2023-2024:Supply and fitting Digital multifunction meter to read VA,PF,KW,KWh, accuracy class-1 LCD

pipe renewal at desom west LI scheme

OD239558/2023-2024:Dismantling the existing MS suction pipe/bend of size 300mm piece by piece after providing scaffolding supports, with out further damages including including demolishing the concrete support or detaching metalic supports , etc. and stacking at the yard

OD239508/2023-2024:Dismantling the existing MS suction pipe/bend of size 500 mm piece by piece after providing scaffolding supports, with out further damages including demolishing the concrete support or detaching metalic supports , etc. and stacking at the yard

OD239850/2023-2024:Refitting the MS suction side pipe of size 300 mm piece by piece after providing scaffolding supports,using fresh rubber packing,nuts,bolts etc

OD239875/2023-2024:Refitting the MS suction side pipe of size 500 mm piece by piece after providing scaffolding supports, using fresh rubber packing, nuts, bolts etc

OD239485/2023-2024:Supply, fabrication, conveyance, fixing, testing and commissioning of 300 mm size MS pipe bend with 12 mm thick flanges at both end, fabricated from 300 mm MS pipe having 6.35 mm sheet thickness, with length not less than 1 meter, painting two coats of synthetic enamel paint over a coat of red oxide primer and fixing in position using fresh rubber packing, gaskit packing, bolts and nuts etc. in correct alignment and leak proof condition.

OD239486/2023-2024:Supply, fabrication, conveyance, fixing, testing and commissioning of 500 mm size MS pipe bend with 15 mm thick flanges at both end, fabricated from 500 mm MS pipe having 6.35 mm sheet thickness, with length not less than 1 meter, painting two coats of synthetic enamel paint over a coat of red oxide primer and fixing in position using fresh rubber packing, gaskit packing, bolts and nuts etc. in correct alignment and leak proof condition

14.7:Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) in foundation of pump, DG set etc including form work etc as required.

OD241981/2023-2024:Supply, conveying, erecting, testing and commissioning the 500 mm dia MS pipe in suction/ delivery side having sheet minimum thickness 6.35 mm and cutting in to required length, facing the cutting edges, painting two coats of synthetic best quality enamel paint over a coats red oxide primer, including conveyance charges to pump house and labour charges for loading, unloading,etc.

Bidder Name

FRANCIS PINHERO