Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹1.2 CrAccepted-AOC 777 PLA NEAR TOWN PARK HISAR HARYANA 125001 | HISAR | HARYANA | 125001 | ₹1.2 Cr | L-1 | Accepted-AOC Lowest Bidder |
| 2 | L-2₹1.4 Cr+₹19.7 L (16.1%)Rejected-Finance VILLAGE LAPKAN POST SHAHPUR RANIGANJ DISTT PRATAPGARH 230304 | PRATAPGARH | UTTAR PRADESH | 230304 | ₹1.4 Cr+₹19.7 L (16.1%) | L-2 | Rejected-Finance L-2 |
| 3 | L-3₹1.5 Cr+₹25.1 L (20.5%)Rejected-Finance CO ENG NEZGTY | ₹1.5 Cr+₹25.1 L (20.5%) | L-3 | Rejected-Finance L-3 |
| 4 | L-4₹1.6 Cr+₹34.5 L (28.2%)Rejected-Finance | ₹1.6 Cr+₹34.5 L (28.2%) | L-4 | Rejected-Finance L-4 |
| 5 | L-5₹1.6 Cr+₹36.0 L (29.4%)Rejected-Finance PURAINA PURE HIMANCHAL HOUSE NO 123 MALAON PARASPUR GONDA | GONDA | UTTAR PRADESH | 271001 | ₹1.6 Cr+₹36.0 L (29.4%) | L-5 | Rejected-Finance L-5 |
| Sl No | Description | Qty | Unit | RAJ LAXMI SALES AGENCY L4 | M/s Sulakh Brothers L1 | Abhay Kumar Jain L3 | GOMTI ENTERPRISES L2 | J AND V INFRATECH PRIVATE LIMITED L5 |
|---|---|---|---|---|---|---|---|---|
| 1.00Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom | ||||||||
| 1.10 | With medium setting bitumen emulsion
On W.B.M / W.M.M. @ 0.4kg/sqm | 16,600 | Sqm | 8 ₹1,32,800 Lowest | 20 ₹3,32,000 | 35 ₹5,81,000 | 20 ₹3,32,000 | 18.57 ₹3,08,262 |
| 2.00 | Providing and laying bituminous macadam using crushed stone aggregates
of specified grading premixed with bituminous binder, transported to site
by tippers, laid over a previously prepared surface with paver finisher
equiped with electronic sensor to the required grade, level and alignment
and rolling with smooth wheeled, vibratory and tandem rollers as per
specifications to achieve the desired compaction and density, complete as
per specificatons and directions of Engineer-in-Charge.
50 to 100 mm average compacted thickness with bitumen of
grade VG-30 @ 3.50% (percentage by weight of total mix)
prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. | 1,411 | Cum | 8,400 ₹1,18,52,400 | 5,400 ₹76,19,400 | 720 ₹10,15,920 Lowest | 7,193 ₹1,01,49,323 | 7,487.57 ₹1,05,64,961.27 |
| 3.00 | Providing and applying tack coat using bitumen emulsion conforming
to IS:8887, using emulsion pressure distributer including preparing the
surface & cleaning with mechanical broom.
With medium setting bitumen emulsion
On bituminous surface @ 0.25kg/sqm | 16,600 | Sqm | 12 ₹1,99,200 | 15 ₹2,49,000 | 50 ₹8,30,000 | 10 ₹1,66,000 Lowest | 12.46 ₹2,06,836 |
| 4.00 | Providing and laying semi- dense Bituminous concrete using crushed
stone aggregates of specified grading, premixed with bituminous binder
and filler, transporting the hot mix to work site by tippers, laying with paver
finisher equiped with electronic sensor to the required grade, level and
alignment and rolling with smooth wheeled, vibratory and tandem rollers to
achieve the desired compaction and density as per specification, complete
and as per directions of Engineer-in-Charge.
25 mm compacted thickness with bitumen of grade VG-30 @
5% (percentage by weight of total mix) and lime filler @ 2%
(percentage by weight of Aggregate) prepared in Drum Type
Hot Mix Plant of 60-90 TPH capacity. | 16,600 | Sqm | 168 ₹27,88,800 Lowest | 220 ₹36,52,000 | 650 ₹1,07,90,000 | 180 ₹29,88,000 | 244.75 ₹40,62,850 |
| 5.00 | Providing and applying 2.5 mm thick road marking strips (retro- reflective)
of specified shade/ colour using hot thermoplastic material by fully/ semi
automatic thermoplastic paint applicator machine fitted with profile shoe,
glass beads dispenser, propane tank heater and profile shoe heater,
driven by experienced operator on road surface including cost of material,
labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and
foreign material etc. complete as per direction of Engineer-in-charge and
accordance with applicable specifications. | 830 | Sqm | 700 ₹5,81,000 | 310 ₹2,57,300 Lowest | 650 ₹5,39,500 | 500 ₹4,15,000 | 664.83 ₹5,51,808.9 |
| 6.00 | Providing and fixing Glow studs of size 100x20 mm made of heavy duty
body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High
impact polystyrene) or ABS having electronically welded micro- prismatic
lens with abrasion resistant coating as approved by Engineer in charge.
The glow stud shall support a load of 13635 kg tested in accordance
with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/-
5) degress to base .The reflective panels on both sides with at least 12
cm of reflective area up each side. The luminance intensity should be
as per the specification and shall be tested as described in ASTM I: 809
as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to
the Road surface using the adhesive conforming to IS, as per procedure
recommended by the manufacturer complete and as per direction of
Engineer-in-charge. | 830 | Each | 172 ₹1,42,760 | 160 ₹1,32,800 Lowest | 1,200 ₹9,96,000 | 200 ₹1,66,000 | 183.61 ₹1,52,396.3 |
Tender Value
Refer Docs
EMD Value
₹3.5 L
Closing Date
5 Jul 2025, 6:00 pmClosed
DIG (Engineer) Dte. CRPF
Works Directorate, CRPF, Level-III, East Block-7, RK Puram, Sector-1, New Delhi-110066
Re-carpeting of road at GC CRPF Rampur (UP)
2025_CRPF_865447_1
B.V-GCRPR/25-WksDte-CCell NIT65
Open Tender
Civil Works - Roads
Works
90 days
GC CRPF Rampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹3.5 L
7 Aug 2025
20 Jun 2025
7 Jul 2025
20 Jun 2025
5 Jul 2025
20 Jun 2025
20 Jun 2025 - 5 Jul 2025
Amount
Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom
With medium setting bitumen emulsion On W.B.M / W.M.M. @ 0.4kg/sqm
Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge. 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
Providing and applying tack coat using bitumen emulsion conforming to IS:8887, using emulsion pressure distributer including preparing the surface & cleaning with mechanical broom. With medium setting bitumen emulsion On bituminous surface @ 0.25kg/sqm
Providing and laying semi- dense Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. 25 mm compacted thickness with bitumen of grade VG-30 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weight of Aggregate) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity.
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
Providing and fixing Glow studs of size 100x20 mm made of heavy duty body shall be moulded ASA (Acrylic styrene Acryloretrite ) or HIP (High impact polystyrene) or ABS having electronically welded micro- prismatic lens with abrasion resistant coating as approved by Engineer in charge. The glow stud shall support a load of 13635 kg tested in accordance with ASTM D4280. The slope of retro- reflective surface shall be 35 (+/- 5) degress to base .The reflective panels on both sides with at least 12 cm of reflective area up each side. The luminance intensity should be as per the specification and shall be tested as described in ASTM I: 809 as recommended in BS: 873 part 4 : 1973. The studs shall be fixed to the Road surface using the adhesive conforming to IS, as per procedure recommended by the manufacturer complete and as per direction of Engineer-in-charge.
GOMTI ENTERPRISES (BID ID -3241983)
Abhay Kumar Jain (BID ID -3243277)
RAJ LAXMI SALES AGENCY (BID ID -3243485)
J AND V INFRATECH PRIVATE LIMITED (BID ID -3242782)
stage.html
html • 0.05 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .