ELECTRICAL WORK FOURTH FLOOR

Amount

Electrical Work

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit having wall thickness minimum 2 mm, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. (Group C) Make: SCI/KEI/Phinolex

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / heavy class PVC conduit having wall thickness minimum 2 mm, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.FRLS PVC insulated copper conductor single core cable etc as required. (Group C) Make: SCI/KEI/Phinolex

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. Make: SCI/KEI/Phinolex

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

4 X 10 sq. mm + 2 X 6 sq. mm earth wire

4 X 16 sq. mm + 2 X 6 sq. mm earth wire

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. Make: SCI/KEI/Phinolex

S/D 3 X 1.5 sq. mm

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:- Make :- SSK/Anchor/Schneider

2 Modules (for A.C. point)

8 Modules (for computer point)

Supplying & fixing of G.I. modular boxes of following sizes along with modular base and cover plate for modular switches in recess as required:- Make :- SSK/Anchor/Schneider

S.P. 5/ 10Amps one way Modular switch. (for computer point)

5 pin, 5/ 6 Amps Modular socket outlet. (for computer point)

25 Amp. Switch (for A.C. point)

25 Amp. Socket (for A.C. point)

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required.Make :- Schenider/L&T/Legrand

Supplying and fixing suitable size GI box with modular plate and cover in FRLS on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.Make :- Schenider/L&T/Legrand

Supplying and fixing call bell/ buzzer suitable for single phase, 230 volts, complete as required.Make :- Goldmedal/ Cona/Anchor

Supplying and fixing 6 amps to 32 amps rating, 240/415 volts, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Make :- Schenider/L&T/Legrand

6 Amp Single pole. Cat-A.

16 Amp Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required..Make :- Schenider/L&T/Legrand

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current up to 300 miliampers in the existing MCB DB complete with connections, testing and commissioning etc. as required. .Make :- Schenider/L&T/Legrand

40 Amps. Cat-A.

63 Amps. Cat-A.

Providing and fixing following rating and breaking capacity MCCB with thermomagnetic release and terminal spreaders in existing cubical panel board including drilling holes cubical panel , making connections etc. as required .Make :- Schenider/L&T/Legrand

4P 63/100 Amp 30 KA

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, neutral link, earth bar, din-bar, interconnections, powder painted, including earthing etc. as required:-(But without MCB/RCCB/Isolator) .Make :- Schenider/L&T/Legrand

Double door-16 way

Providing and fixing Double door 12 Way PPI DBs,Available in CRCA sheet steel, RAL 9003, powder coated Provided with 100A insulated phase bus-bars, neutral bars with shrouds, earth bars, sticking saddles, cement spill protector, color-coded interconnecting wire set, cable ties,blanking plates and circuit identification labels With provision for FP MCB/Isolator/RCCB/RCBO as incomer,DP RCCB/RCBO as sub-incomer and SP MCBs as outgoings as required complete in all respects. Make :- Schenider/L&T/Legrand

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: of Approved Make Makes :- Usha/Crompton/Bajaj

Ceiling Fan 1200 mm sweep

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required: of Approved Make Make:- Usha/Bajaj/Anchor

Exhaust Fan, Light duty, (Domestic) 230mm LD

Providing and installation of LED fixture 18W +/- 1W LED round/square surface mounted downlighter with minimum system lumen efficacy of 85 lm/W with and P.F. >0.95 with THD <20%, CCT 6000K, CRI 80. The LED with useful life of 50000 Hrs. at L70. The input voltage range shall be 150V as required complete with connections, testing etc. with 5 years warranty. Make:- Clair/Wipro/Panasonic

LED Surface mounting round downlighter 18 watt

Providing and fixing of LED fixture 1200mm x 300mm 36Watt +/- 1W surface mounted with PMMA diffuser with having minimum system lumen efficacy of 100lm/W with with CRCA housing and PMMA diffuser with P.F. >0.95, THD<10%, CCT 5700K, CRI 80. The LED shall be tested with LM80-08 standard with useful life of 50000 hrs. at L70. The input voltage range shall be 150V as required complete with connections, testing etc. with 5 years warranty. Make:- Clair/Wipro/Panasonic

36 Watt LED 1'x4' Surface panel

Providing and fixing of LED Bulkhead 10W +/- 1W with minimum system lumen efficacy of 100 lm/W with and P.F. >0.95 with THD<10%, CCT 5700 K, CRI 70, surge protection 4 kV. The LED with useful life of 50000 hrs. at L70. The input voltage range shall be 150V to 270V as required with 5 years warranty. Make:- Clair/Wipro/Panasonic

LED Bulk Head Light 10W

Providing and fixing decorative LED mirror light having high quality design suitable for LED tube up to 10Watt (1000 lumen) 6500K and it should be compatible with specifications i.e. power factor ≥ 0.9, harmonic distortion ≤ 10% and efficacy ≥ 100 lumens per watt, CRI > 80, suitable for input voltage AC 220-240V, 50/60 Hz, complete with all accessories, connections, testing and commissioning etc. as required with 5 years warranty. Make:- Clair/Wipro/Panasonic

10 Watt LED Mirror Light, 2 ft.

Providing and fixing of LED batten having minimum efficacy of 100 Im/W, P.F.>0.95 with THD<10%, CCT 6500 K,CRI 80, Surge Protection range 2 kV. The LED with useful life of 50000 Hrs. at L70 with five years warranty. The Input voltage shall be 150V to 270V, 50/60 HZ along with all accessories, including connections, testing etc. as required complete in all respects with 5 years warranty.

Make:- Clair/Wipro/Panasonic

LED Batten 20 Watt

M/s Jamwal nxt gen energy solutions (BID ID -555278)

Sourab Kuthiala (BID ID -555542)