Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.4 LAccepted-AOC | L1 | Accepted-AOC Accepted being L1 | |
| 2 | L2₹26.6 L+₹44,925.30 (1.72%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹27.3 L+₹1.2 L (4.51%)Rejected-Finance PR CDA SC PUNE 01 THROUGH AO GE DEHU ROAD | L3 | Rejected-Finance Rejected | |
| 4 | L4₹28.1 L+₹1.9 L (7.30%)Rejected-Finance | L4 | Rejected-Finance Rejected | |
| 5 | L5₹29.7 L+₹3.5 L (13.5%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
25 Nov 2019, 6:00 pmClosed
GE DEHU ROAD, PUNE
GE DEHU ROAD, PUNE
REPAIR TO PLASTER ROOF TREATMENT TILING,FLOORING AND PLINTH PROTECTION ETC AT SARVATRA NAGAR INDRAYANI DARSHAN 323 AD REGT ETC UNDER AGE BR WEST AT GE DEHU ROAD
2019_MES_295906_2
8395
Open Tender
Civil Works
Item Rate
180 days
GE DEHU ROAD, PUNE
Please refer Tender documents.
7 documents required · 7 mandatory
₹500
GE DEHU ROAD, PUNE
₹90,000
3 Jan 2020
8 Nov 2019
2 Dec 2019
8 Nov 2019
25 Nov 2019
18 Nov 2019
Amount
Dismantling of single layer Mangalore pattern or similar tiles in roofing all as specified and directed by the Engr-in-charge
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed by the Engr-in-charge
Dismantling plain or corrugated steel sheeting any gauge, any thickness including Nainital or similar pattern roof covering , in wall clading and valley gutters complete all as specified and directed.
Dismantling of boarding, any description and fixed in any position with nails complete all as specified and directed.
Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed by Engr-in-charge.
Dismantling wall & ceilling boards(fibre pulp insulation etc) or insulation boards/ slabs/blankets, any thickness including cover fillets complete all as specified and as directed.
M&L rolled sections as in main and cross beams, hip rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed witjh angle cleats or other connecting plates Fe 410 W (gde E 250 ) quality A including a shop coat of zink chromate primer complete all as specified and as directed.
S & F 0.50mm thick pre painted/coloured galvalum aluminium zinc coating GI based corrugated steel sheet of any colour in roofing having tensile strength 550 Mpa fixed with self tapping screws all as specified and directed.
All as per item No. 8 above but plain sheet fix in valley gutter / ridge complete all as specified and as directed.
M & L for 19 mm thick Armstrong board (SABBIA/DUNE MAX)perforated with tegular edge 60 x60 cm in ceiling over GI Armstrong grid prlude XL 24 mm grid main runner height 37 mm and secondary runner height 30 mm including 2.6 mm/2.8 mm GI wire suspenders of suitable length as per manufacturers instructions all as specified and directed.
Taking out existing water proofing treatment including cement plaster(any no of layers) on roof surfaces, cleaning the surfaces and removing the debris outside MOD land complete all as specified and as directed.
M & L for providing 25 mm thick PCC 1:2:4 type B0 ( using 12.50mm graded stone aggregates ) as in filling in levelling course over roof slab ,complete all as specified and directed.
Extra over rendering for work in isolated width such as in bands, sunk pannels, cornices, skirting sides of slabs, parapet sides and top drip moulds etc and similar work not exc 15 cm width or girth complete all as specified and directed by the Engr-in-charge.
M/L for APP water proofing treatment as specified as under including cleaning surface with wire brushesh etc. :-(a) M&L 10mm thick cement plaster in CM1:3 over roof surface and then Apply one coat of bituminous primer @ 0.20 kg/Sqm complete all as specified and directed.(b) Laying APP Polimerised modfied membrane 3mm thick weighing not less than 3.5 kg per Sqm by torch applicaton method (thickness of membrane shall not be less than 3mm) (c ) The overlap for APP membrane shall be 75 mm on longitudinal direction and 100 mm on transverse direction (d) Finally applying a coat of solar reflective bitumiious aluminium paint @ 0.15 Kg/Sqm over the membrane. (e) The make / treatment shall be from the one of the following manufacturer:-(i) 'Moply FP' of M/s Texsa (I) Pvt Ltd. (ii) 'Hyperplast' of IWL India Ltd. (iii) 'Super thermpay' manufactured by M/s Shalimar tar product (iv) 'Hydroflame' of M/s Hydrotech Ltd.
Disconnecting existing PVC water tanks of capacity 500 litres, setting aside (or lowering if required) for replacement complete all as specified and as directed.
Fixing only water tanks of capacity 500 Ltr incl cleaning and removing all scale and dirt etc from tanks and mouth of circulating pipes complete all as specified and as directed.
S & F rotational moulded polyethylene double layer water tanks (vertical cylindrical with close top) as per IS 12701: 1996 of 500 litres capacity hoisted and fixed in position including provision of 20 mm /15 mm dia medium grade GI pipe spouts for connecting inlet, outlet, over flow and washout pipes all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing of 15 mm bore of pipe complete all as specified and as directed.
Taking up or down steel tubing and connections including cleaning for refixing of 20 mm bore of pipe complete all as specified and as directed.
Refixing old 15 mm bore steel tubing medium grade and connection in new or old position and fixed to wall, ceiling, floor complete all as specified and as directed.
Refixing old 20 mm bore steel tubing medium grade and connection in new or old position and fixed to wall, ceiling, floor complete all as specified and as directed.
M & L for 15 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
M & L for 20 mm bore GI pipe medium grade with all fittings and fixtures and fixed to wall, ceiling, floor complete all as specified and as directed.
S & F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe of 20 mm bore and fixed (minimum weight 210 gms) complete all as specified and as directed.
S & F in repairs stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or union fixed in repair for 15 mm dia GI pipe all as specified and as directed.
Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and directed.
M&L for rendering cement plaster 10 mm thick in CM 1:6 on fair faces of brick walls finished even and smooth w/o using extra cement complete all as specified and directed
M & L for Rendering 5 mm thick cement plaster on concrete surface as in ceiling in cement mortor 1:3 complete surface shall be even and smooth without using extra cement complete all as specified and directed.
M&L for rendering cement plaster 15 mm thick in CM 1:4 on fair faces of brick work or conrete surfaces finishing the surfaces even and smooth without using extra cement complete all as specified and directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of oil bound distemper on walls over a coat of primer on plastered surfaces complete including 3mm thick wall care putty complete all as specified and directed.
M & L for Preparation of newly plastered surfaces of wall and appling two coats of cement base paint on walls over a coat of primer on plastered surfaces complete all as specified and directed.
M&L for preparation of newly plastered surfaces of ceiling and applying three coat of white washing complete all as specified and directed.
S&F in repairs Bib Cock fancy type chromium plated 15 mm dia complete all as specified and directed. Make Jagur cat part No CON-047KN or equivalent make all as specified.
S & F in repairs pillar taps fancy type cromium plated with capstan heads, chromium plated, screwed down high pressure, and fly-nuts, screwed for iron pipe and fixed for 15 mm dia pipe. Make Jagur Cat Part No CON-011KN or equivalent make
S & F in repairs Brass cromium plated shower rose of 125 mm dia complete all as specified and directed
S&F Grating Doom 140 mm size of PTMT (Minimum weight 50gms) complete all as specified.
S&F in repairs Toilet Roll Holder with Stainless Steel. Make Jagur Cat Part No ACN-1153S or equivqlent make.
S& F in repairs stainless steel Sinks for kitchen or laboratory with plugs, washers and waste couplings; including beding in cement mortar overall size 495mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete including fixing cantilever brackets and connecting union to waste pipe and coupling complete all as specified and directed.
S/F in repairs Vitreous china wash basin white flat back size 550 x 400mm including , waste pipe and plug and porcelain stopper and brackets incl cutting for and pinning in ends of brackets or erecting stand along with 32mm dia CP waste coupling complete all as directed.
S & F for PVC connection pipe 15mm dia with PTMT nuts of length 450mm complete all as specified and directed
S&F as in repairs PVC low/high level flushing cristern white 10 litre capacity incl PVC inlet pipe with brass check low level full alongwith PVC flush pipe 32mm dia jointed to WC and handle incl bracats all as directed. (Note:- The rates for including this items for removing existing fluhing system of CI or any other quality incl brackets).
S&F in repair plate rack made of stainless steel 1mm thick kitchen including fixing overall size 915mm x 915mm x 255 mm all as specified and directed.Make Nirali/Silver shine
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), all as speicfied and directed.
M & L non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm , in floors, etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles. Over and Including 15 mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed.
M & L for Non skid coloured ceramic tiles 7 to 8 mm thick area of each tiles exceeding 0.11 sqm but not exceeding 0.18 sqm, as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles including backing coat of 10 mm thick rendering in CM 1:4 all as specified and direced.
M&L for vitrified coloured tiles 10mm thick (square/rectangular) polished area of each tile 0.36 sqm but n exc 0.42 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed.
Ditto as per item No 47 above but on skirting with and including backing coat of 10 mm thick rendering in CM 1:4 complete all as specified and directed.
M & L Glazed ceramic tiles in vertical surface 350x250mm x 7mm/ 450mm x300x7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles with and incl backing coat 10mm thick in CM 1:4 all as direced.
Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid and bedded and jointed in cement mortar complete all as specified and directed.
Demolition of cement concrete ( unreinforced) in ground floors and paving n exc 15 cm thickness (below or above ground level) complete all as specified and directed
M & L for 75 mm thick cement concrete (1:3:6) Type C2 (using 40mm graded aggregates) as in plinth protection finished top surface even and smooth without using extra cement complete all as specified/ including cutting out joints.
M & L for 100 mm thick Cement concrete type D-2 1:4:8 (40 mm graded aggregate) as in sub base for tiling complete all as specified and directed.
M & L for 25 mm thick Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed.
M & L for precast concrete interlocking paver block rubber moulded any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment over Sand cusioning complete all as specified and directed.
M & L for Chequered cement concrete tiles of 20 cm x 20cm x 25 mm thick with grey cement and pigment,set and jointed in neat cement slurry in floors including 15 mm thick screed bed or bedding layers in cement mortar 1:6 for laying tiles complete all as specified and directed.
Dismantling posts or struts (wood , steel or RCC) any section including taking out embeded portion in concrete or brickwork and making good disturbed Ground complete all as specified and directed.
Excavating in post holes (or similar holes) each in hard /dense soil n exc 0.5 cum getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface
M & L for Cement Concrete Type D-2 1:4:8 type (using 40mm graded stone aggregate ) as in foundation, filling and mass concrete complete all as specified and directed.
S&F angle iron fencing post and struts including cutting tops to shape as directed, drilling holes, notching for wire etc , flat iron fillets ( for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 any size.
S&F MS Screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut length exc. 5 cm but not exc 10 cm long 11 to 15mm dia of shank complete all as specified and directed.
Supply only chain link MS galvanised fencing of any type of strands, rails, straining bolts etc incl provn of binding wire all complete all as specified and directed. Note :- weight of chain link fencing shall be measure by BOO.
Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts etc incl provn of binding wire complete all as specified and directed.
S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment of Fe 410 -W (Gde- E- 250) quality- A complete all as specified and directed.
M&L mild steel bars 10mm dia and over cut to length bent to shape required incl cranking, bending spirally for hoping for columns, hooking ends and binding with and incl MS Wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F in repairs plastic water closet seat, black / White closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hanging deivce complete all as specified and directed.
S&F in repair vitreous china squatting pan ORRISA PATTERN size 580x440mm white with integral foot rests excluding flushing cistem & fush pipe fixed in repairs complete all as specified and directed.
S&F in repairs vitreous china wash down water closet pan (pedestal pattern) of size 580x440 white with 'P' or 'S' trap including connection to drains (or outgoing pipes) and to the flushing pipes, complete all as specified and directed.
M & L for PCC 1:7:12 type F2 (uisng 40mm graded aggregate) as in filling, mass concrete, for sunkun floor complete all as specified and directed.
Providing and carrying out water proofing treatment to toilet ,sunken slabs ,wet areas etc,after proper surface prepration ,carry out cementitious ingection grouting at leakage point using Cebex 100 plasticised expanding grouting admixture ,application of polymer modified at slab wall junction using Nitoband SBR latex screed modifier cum bonding agent and application ot two coats of brushbond RFX two part acrylic polymer modified cementitious elastomeric waterproof and protective coating etc,complete including all tools and plants as per manufacturer's specification complete all as specified and directed.
S&F 40mm dia of UPVC pipes of pressure rating 10 kg/cm2 laid in sunkun portion as spout complete all as specified and directed.
Preparation of old plastered surfaces of walls including washing, rubbing down distempered surfaces, filling the uneven surfaces with wall putty of approved make and applying two coat of distemper oil emulsion washable on plastered surfaces surface of walls all as specified and directed.
M&L for preparation of New steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer over steel surface area not exc. 10cm in width or girth complete all as specified and directed.
H S TAKHI
S Y Itkar Construction and Company
DR J S CHADHA AND SONS
RAMESH PATIL
Dinesh Constructions
Preeti Enterprises
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .