Turn Key Work against Deposit Scheme under EDD-II, Nanpara

Amount

All Materials Provided by the Contractor as per Resspo Norms PART-A (Supply)

PCC Pole 8.5 Mtr long

ST Pole 11 Mtr. Long

11/0.4 KV 630 KVA T/F

Stone Pad

11 KV 'V' Type Steel X-Arm

11 KV Pin Insulator with Pin

11 KV Disc Insulator with Fitting

11 KV Disc Insulator 70 KN

11 KV Disc Fitting 70 KN

ACSR Weasel Conductor

ACSR Dog Conductor

Stay Set Complete

Earthing Complete

GI Barbed Wire

Top Channel

AB Cable 3x95+1x70+1x25mm2

Croos Braching Angle

11 KV Cable Jointing Kit O/D

11 KV Cable Jointing Kit I/D

Alluminium Binding Wire

Alluminium Paint

Red Oxide Paint

Earth Wire Clamp

Alluminium Tape

11 KV XLPE Cable 3x120sqmm

PG Clamp for Dog

11 KV Fuse Set

Structure Fuse Set

Structure line & Bus Isolator

Structure for Post Isolator

Structure for LA

Main Bus Bar with Structure

Clamp for Top, Tee Drop, Guard etc

V-Type X-Arm Holding Clamp

Danger Board, No-Plate Bolt with

F-Bracket Clamp

PP Clamp

Number Plate

Terminal Gantry

Line & Bus Bar Isolator

Post Insulator

Lightening Arrestor 11 KV

Distribution Box

MS Nut & Bolt with washer

PART-B (Erection Work)

Fabrication & Erection of Single PCC Pole (8.5 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site with complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Fabrication & Erection of Single ST Pole (11 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site with complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Fabrication & Erection of Double PCC Pole (8.5 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site with complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Fabrication & Erection of Double ST Pole (11 Mtr Long) for 33 KV, 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms.

Grouting of Poles with 1:4:8 CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Supply, Grouting nozzling & binding of stay sets with stay clamp complete fittings. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Earthing Complete at 11/0.4 KV T/F as per RESSPO Norms.

Earthing Complete at HT/LT Pole as per RESSPO Norms.

Boring Type Earthing Complete as per RESSPO Norms.

Laying of Double circuit 11 KV 3x120sqmm XLPE Cable in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine sand, 1st class bricks, stone slab. Inter axial spacing between the two cable should be in between 0.25 m to 0.40m. the two cables should be seprated by a partition of single bricks with Complete Fitting.

Errection & Commissioning of AB cable 3x95+1x70+1x25mm2 including complete fitting of Accessories (All Accessories shall be Provided by the Contractor).

Laying, stringing, sagging, binding & jumpering of conductors of 11 KV in 3 phase, 4 wire guard wire the help of necessory clamp and binding wire proper connector & Clamp (Complete Fitting.)

Laying, stringing, sagging, binding & jumpering of conductors of 33 KV in 3 phase, 4 wire guard wire the help of necessory clamp and binding wire proper connector & Clamp (Complete Fitting.)

Fixing of Cable Jointing kit O/D

Fixing of Cable Jointing kit I/D

High Pressure testing of 11 KV XLPE cable, Testing equipment will be arranged by the contractor.

Fixing of 11 KV Fuse Set Complete as per Resspo Norms.

Insllation of Terminal Gantry as Per Assign Attached.

Cartage & Fixing of 11 KV VCB 200/100/5Amp

Fixing & Installation of Structure for 11 KV Fuse Set as per Resspo Norms.

Fixing & Installation of Main Bus Bar Complete with Structure

Fixing & Installation of Structure for line & Bus Isolator

Fixing & Installation of Structure for Post Insulator

Fixing & Installation of Structure for LA

Fixing of Lightening Arrestor for 11 KV Line

Construction of masonary Plinth suitable for 630 KVA & 100 KVA T/F as per Respo Norms.

Wire Mesh Fencing suitable for 100 KVA T/F as per Resspo Norms.

Wire Mesh Fencing for Covering of 11/0.4 KV Switchyard including 3x630 KVA T/F and all Accessories as per Resspo Norms.

Fixing of Line & Bus Isolator

Fixing of Post Insulator

Fixing of Number Plate

Fixing of Alluminium Binding Wire

Alluminium Painting work (ISI Mark Paint)

Red Oxide Painting work (ISI Mark Paint)

Fixing of Earth Wire Clamp

Fixing of PG Clamp for Dog

Fixing of Alluminium Tape

Mounting & Jumpring of 630 KVA T/F with complete fitting.

Carriage & Mounting & Jumpring of 100 KVA T/F with complete fitting.

Cutting of Tree Branches

Fitting of Three Phase Distribution Box

Anil Kumar Yadav