Provn of sewage line septic tank soakwell RCC Cover slab and guard wall from Bldg No. P-355, P-167, P-168, P-163, P-170, P-143 to P-293, drainage and Hand wash point cook House Bldg No T-25, T-26, T-27 and T-2, of 4/4 GR at Anarwala, PCC connected Ro

Amount

Excavation in trenches not exceeding 1.50 metre wide and not exceeding 1.50 metre depth for foundation, manhole etc not exc 10 Sqm on plan and not exc 1.5 metre in depth including getting out in any type of soil complete all as specified and as directed

Returning, filling in soil including spreading, leveling watering and well ramming in layers not exceeding 25cm complete all as specified and directed.

Removing excavated surplus soil/material not exceeding 50 metre and depositing where directed at a level not exceeding 1.5 metre above the starting point complete all as specified and directed

M&L 150mm internal dia salt glazed stoneware drain pipe Gde 'A', laid in trenches and jointed in cement & sand mortar (1:1), complete all as specified and directed.

M&L for concrete in PCC (1:3:6) type C-2 ( using 40 mm graded stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for 150 mm bore pipe complete all as specified and directed .

M & L for 75mm thk PCC 1:3:6 type C-2 as in plinth protection, finished even and fair without using extra cement. The plinth protection shall be laid in alternate bays nexe 2 sqm with 10mm wide joints filled with bitumen mastic comprising of 1 part of hot bitumen 85/25 grade and 3 parts sand all by weight complete all as specified.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6 metre means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for rendering 15 mm thick on fair faces of brick or concrete surface in cement mortar (1:4) finished even & fair without using extra cement complete all as specified and directed.

Taking down rain water pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc including cleaning or refixing or removal to stone measured overall as fixed along the centre line over fittings and accessories complete all as specified and directed.

S&F 75mm bore UPVC (SWR) pipe 4 Kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed. Make: Supreme/ Finolex

S&F 110mm bore UPVC (SWR) pipe 4 Kgf/cm2 single socketed in any length with rubber ring, fixed on wall complete all as specified and directed. Make: Supreme/ Finolex

S&F 75mm bore UPVC (SWR) pipe 4 Kgf/cm2 single socketed in any length with rubber ring, joint laid in treches complete all as specified and directed. Make: Supreme/ Finolex

S&F 110mm bore UPVC (SWR) pipe 4 Kgf/cm2 single socketed in any length with rubber ring, joint laid in treches complete all as specified and directed. Make: Supreme/ Finolex

S&F UPVC (SWR) bend, 75mm bore complete all as specified and directed. Make: Supreme/ Finolex

S&F UPVC (SWR) bend, 110mm bore complete all as specified and directed. Make: Supreme/ Finolex

S&F UPVC (SWR) junction single, (Single T) equal or unequland, 75mm bore with access door complete all as specified and directed. Make: Supreme/ Finolex

S&F UPVC (SWR) junction single, (Single T) equal or unequland, 110mm bore with access door complete all as specified and directed. Make: Supreme/ Finolex

S&F UPVC (SWR) Cowl 75mm bore complete all as specified and directed. Make: Supreme/ Finolex

S&F UPVC (SWR) Cowl 110mm bore complete all as specified and directed. Make: Supreme/ Finolex

M&L precast RCC (1:2:4) type B1(using 20 mm graded crushed stone aggregate) as in landings, man hole cover slab, chajjas etc.and similar articles with plain faces set in CM (1:6) complete all as specified and directed.

M & L for cement concrete ( 1:3:6 ) type C1 (using 20 mm graded stone aggregate) as in surface channels and drains and benching including finishing the top of benching even and smooth using extra cement and necessary form work, and demolition of concree complete. (Note : Forming fair finished channel for drain using extra cement will be measured and paid for separately.)

M&L for PCC (1:3:6) type C-1 (using 20 mm graded crushed stone aggregate) as in parapets and railings up to 60cm in height , coping, kneelers, apex stone, bed plates, water throughs and the like including weathering, slighty rounded or chamfered angles and throating complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in foundation, filling & mass concrete, sub base complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20 mm graded crushed stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands, plinth courses, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed with and including necessary form work and demolition of concrete complete all as specified and directed.

Provn of 50 users septic tanks including excavation and earthwork in any type of soil , PCC foundation, brick work, RCC cover slab, precast RCC man hole cover with angle iron frame vent shaft and sludge chambers complete all as shown on TD drawing, specified and directed.

M&L for construction of soakage well, internal dia 1.80M dia & depth 3.00M including excavation and earthwork in any type of soil ,brick work etc,complete all as shown on TD drawing, specified and directed.

Dewatering of soak well or sewage pit of any dia and depth manually or by using pump and removal of sludge if any to a distance exc 1.5 Km but not exc 5 Km out side of MOD land complete as directed by Engineer-in-Charge.

Cleaning of septic tank of any size capacity by removing sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 Km but n.exc 5 Km out of MOD land complete all as specified & directed by Engineer –in Charge. (Note:- Measurements will be taken only after dewatering of the septic tank).

Cleaning of manholes not exceeding 1.5m depth and removing the sludge and burying the waste material in borrow pits. Note:- (Cost of the borrowpit shall be deemed to be included in the quoted rates of this item)

Cleaning of CI/PVC pipes of any dia from first floor to ground floor up to trap and 1st manhole along the wall, floor, including rodding and removing waste material to a distance not exc 50 mtr all as directed.

S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. Complete drilled for fixing of steel sheeting or other covering, Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed.

Surface excavation n exc 30cm deep averaging 15cm deep in any type of soil and getting out complete all as specified and directed.

M&L for hardcore of broken stone or boulder of gauge exc 63 mm but n.exc 100 mm deposited, spread and leveled in layers n.exc 15 cm thick, watered and rolled/rammed to a true surfaces,complete all as specified and as directed.

M&L sand filling under floors/ paving including spreading levelling watering and consolidation complete all as specified and directed by Engr-in-charge.

M&L for machine pressed precast cement concrete interlocking paver block, prepolished, coloured, any shape and size confirming to IS 15658-2006, of 60mm tickness, M-35 grade, in floors laid over sand filling and filling of gap with dry sand complete all as specified all as directed by Engineer-in-Charge. (Note:-Sand filling shall be measured and paid separately)

S&F mild steel Framed work such as grills, gratings , Iron Chowkhats etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work mild steel conforming toFe 290. Gde-E-165 complete all as specified and directed.

M&L 20 to 25 mm thick machine cut kota stone slab flooring in step over and including 15mm CM (1:6) screed bed laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab incl rubbing, rounding of edges & polishing including demolition of old stone flooring complete.

M&L for coloured Glazed ceramic tiles in vertical surfaces of size 300mm x 200mm, 5-6mm thick over and including 10 mm thick bedding layer in CM (1:3) , set and jointed in neat cement slurry and pointed in white cement mixed with coloured pigment to match complete all as specified and directed.

M&L steel water tubing 15mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

M&L steel water tubing 20mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc fixed complete to walls and ceiling or laid in floors complete all as specified and directed.

S&F 15mm bore bib taps, cast copper alloy fancy type chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe for brass ferrule and fixed complete all as specified and directed.

S&F stainless steel sink made out of 1mm thick sheet kitchen or laboratory with plugs, washers including beding lime cement mortar to dwarf wall or including fixing cantilever brackets fixed to wall and connecting union to pipe overall size 495x420mmmm bowl size 410mmx330mmx160mm complete all as specified and directed.

M&L for 18-20mm thick machine cut polished granite 1st quality "black" stone slab over kitchen platform and similar places over and including 15mm thick screed bed in cement mortar (1:4) laid and jointed with grey cement slurry mixed with pigment to match with existing surface including demolition of existing stone slabs and tile of any description or thickness in floors, approns etc laid, bedded and pointed in any mortar including grinding and moulding of exposed edges of granite complete all as specified and directed.

S&F rotational moulded polyethylene 1000 Ltrs Capacity water storage tanks three layered, (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valve PTMT, with polythelene float and fly nut including 20mm dia GI medium grade over flow pipe , approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end complete all as specified and directed including dismantling of old tank complete.

M&L for rubber moulded prepolished coloured Chequered cement concrete tiles 300mm x 300mm x 25mm thick (in any shape) , set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed in cement mortar 1:6 complete all as specified and directed by Engr-in-Charge.

M&L for RCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in slabs supported on walls, beams and columns, in floors, roofs, landing balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed.

S&F mild steel TMT bar 10 mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire ( annealed) not less than 0.9 mm dia as specified .

S&F mild steel TMT bar 6mm to 8mm dia & over, cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.9 mm dia as specified .

M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exc 200mm thick (Horizontal or sloping) for fair finished flat surfaces of concrete.

M&L for preparing new plastered or previously untreated walls surfaces and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for 75mm thick cement concrete (1:4:8) type D-2 (using 40mm graded stone aggregate) as in sub base of floor for lay floor finish complete all as specified and directed.

M&L for 100mm thick PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in hardstanding/ floor using matelic hardener, laid in alternate bays using floor hardner of approved make (Make: Fosroc/ CICO) and filling the joints with & including bitumen and sand (1:3) by weight, surface finished even and fair without using extra cement complete all as specified and directed.

M&L for construction of soakage well, internal dia 1.2M dia & depth 4.5M including excavation and earthwork in any type of soil ,brick work etc,complete all as shown on TD drawing, specified and directed.

Supply, laying & testing cable XLPE insulated screened PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) with stranded aluminiium conductor, 1100 volts cross sectional area 120 sqmm 3.5 Core all as directed incl lugs thimbles and gun metal cable glands and heat shrinkable PVC sleeves on exposed surfaces and tuflon tape duly insulated complete.

S&F of tamper proof electronic three phase 4 wire CT operated trivector energy meter (LCD display) class 1.0 AC including cast resin CT's and copper busbar 300mm long 400Amps mounted on cast resin insulators houses in 600x300x1050mm box made out of 3.15mm thick CRCA sheet and including cable glands of min 95 Sqmm 3.5 Core LT cable 02 Nos for incoming outgoing cable connection padlock arrangement and proper sealing with tamper proof PVC seals and provn of glass window for taking meter reading without opening the box complete all as specified and directed.

S&F AC three phase static energy meter of accuracy class 1.0, 3x240V, 50Hz with backlight LCD display of rating 10-60A (measures and displays KWH, V, Current I, KW, pf last month history of KWH, MD in KW) with special features like TOD, tamper logging, optical communication port display in absence of power with transparent hinge type box complete all as specified and directed.

S&F of CT Cast resin ration 600/5 Amps complete all as specified and directed.

Material and labour for CPRI approved chemical earthing complete with GI pipe electrode 50 mm dia, 2 Mtr long with terminal size 50x6 mm buried directly in ground not less than 2.25 m deep below normal ground level and backfilled gel type compound incl connected with and incl galvanized wire 4 mm earth lead duly protected by 15 mm dia GI pipe upto test point including PVC access well & cover with and incl necessary earth work in soft/loose soil for bore hole upto required depth for earth electrode including testing on completion all as specified and directed. Make : SNE/OBO/ENNOVE

M&L for sand cushioning in trenches for protection of UG cable with river bed sand laid dry in trenches before and after laying of cable, including well ramming and consolidation complete all as specified and directed.

M&L for providing of new sub class 'B' bricks, old size, well burnt laid flat dry for protection of under ground cable complete all as specified and directed.

M/S C S AITHANI

Ram Naresh Singh Sikarwar

M/s Teg Singh Negi

M/s Anil Kumar