Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹22.5 LAccepted-AOC | L1 | Accepted-AOC Accepted being lowest bidder | |
| 2 | L2₹23.3 L+₹35,929 (1.57%)Rejected-AOC 47 A SHIKARGARH ARMY AREA JODHPUR RAJASTHAN 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | L2 | Rejected-AOC Rejected being higher bidder | |
| 3 | L3₹23.5 L+₹53,384 (2.33%)Rejected-AOC SARDARPURA 1ST B ROAD NEAR HANUMAN JI KA MANDIR JODHPUR RAJASTHAN 342 003 | JODHPUR | JODHPUR | RAJASTHAN | 342003 | L3 | Rejected-AOC Rejected being higher bidder | |
| 4 | L4₹24.7 L+₹1.7 L (7.63%)Rejected-AOC | L4 | Rejected-AOC Rejected being higher bidder | |
| 5 | L5₹24.8 L+₹1.9 L (8.09%)Rejected-AOC | L5 | Rejected-AOC Rejected being higher bidder |
Tender Value
₹25 L
EMD Value
₹50,000
Closing Date
22 Apr 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) Jodhpur
GE (AF) Jodhpur
CERTAIN BR REPAIR TO MES INSTALLATION AT TECH AREA OF AF STATION UNDER AGE BR II OF GE (AF) JODHPUR
2023_MES_586954_1
8558/E8
Open Tender
Civil Works - Others
Item Rate
180 days
GE (AF) Jodhpur
Please refer Tender documents.
6 documents required · 6 mandatory
₹500
GE (AF) Jodhpur
₹50,000
11 May 2023
25 Mar 2023
24 Apr 2023
25 Mar 2023
22 Apr 2023
9 Apr 2023
Amount
Demolition of reinforced concrete of roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work incl cutting of reinforcement as required to facilitate the demolition including removing debris out site of MD land complete all as specified & directed.
Taking down old exising roof treatment (APP membrane and plaster) including roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc. including removing debris out site of MD land complete all as specified & directed .
Dismantling wrought iron or mild steel work of any description not otherwise described for of any description complete all as specified & directed.
Demolition of PCC of any description & in any position not otherwise specifically provided for including removing debris out site of MD land complete all as specified & directed.
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) including removing debris out site of MD land complete all as specified & directed.
Taking down cement or cement lime plaster of any description on brick or stone walls , etc. including raking out joints, hacking for key, scrubbing down with water , etc. including removing debris out site of MD land complete all as specified & directed.
Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including ridge etc complete all as specified & directed.
Taking down carefully water tanks of capacity n exc 1000 ltr incl disconnecting the pipeline & supply and fixing new rotational moulded polyethylene water storage tank of capacity 1000 ltrs (Cylindrical vertical with closed top), triple layer construction, ISI marked including GI light grade, over flow pipe 450mm and waste pipe 600mm long with all fitting etc. of 20 mm dia hoisted & fixed in position after necessary water proofing treatment of roof incl reconnection inlet outlet, vent pipe and float valve etc complete all specified and directed. (All necessary fittings & fixtures required for inlet & outlet connection shall be deemed to included in this item).
Taking down chowkats or frames exc 1.5 Sqm but not exc 4 Sqm each with shutters (without taking off shutters from the frame) and disposing off complete all as specified & directed.
Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each all as specified & directed.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) including removing debris out site of MD land complete all as specified and directed.
Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 20mm bore complete all as specified and as directed by Engineer-in-Charge.
Taking up or down steel tubing & connections, including cleaning for re-fixing or removal to store of 15mm bore complete all as specified and as directed .
Material and labour for non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, (400x400mmx 7 to 8mm thick) in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6 as in flooring complete all as specified and directed .
Material and labour for Glazed ceramic coloured printed tiles in vertical surface 300x450x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the surface of tile including 10 mm thick screed plaster in CM (1:4) as in skirting/dado complete all as specified and directed .
Material and labour for 10 mm thick rendering in Cement Mortar 1:3 mixed with water proofing compound @ 3% by weight of cement, on existing concrete surfaces on roof, finishing even and smooth without using extra cement complete all as specified & directed. Note:- Water proofing compound shall be paid seperately as supply only.
Material and labour for rendering 15 mm thick in CM (1:4) mixed with water proofing compound @ 3% by weight of cement on brick/concrete surface of external walls, finished even & smooth with using extra cement complete all as specified and directed. (Note :- Integral WPC will be measured and paid separately as supply only.)
Material and labour for rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement complete all as specified and directed.
Material and labour for rendering 10mm thick in CM 1:3 on ceiling of concrete surface and finishing the surface even and smooth without using extra cement complete all as specified and directed.
Material and labour for preparation of newly plastered or unplastered wall surfaces and applying two coat of oil bound distemper over and including one coat of primer complete all as specified and directed.
Supply only integral water proofing compound.
Supply and fixing 35mm thick 2nd class HW rail and style Plain framed, panelled shutter ( two panels ) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed.
Supply and fixing 35mm thick 2nd class HW Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.divided into squares, with plain,chamfered or rounded, mitred and rebated sash bars,any numbers, edges of framing plain,chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats all as specified.
Supply and fixing solid PVC door frame of size 50mm x 47mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tube complete all as specified.
Supply and fixing factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tubes for top and bottom rails MS frameshall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain cover PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles, and rails with suitable PVC sheet beading and joined together with solvent cement supplying and fixed in the frame at site as per specification and drawing complete all as specified and directed.
Supply & fixing approved colour powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, window, ventilator with one or more rebates or aluminum section of two or more tracks in case sliding windows including jointing cleat for fixing, necessary fitting (handle, locking arrangement, stopper) for fixing etc. complete all as specified and directed.
Supply and fixing 5.0 mm thick ordinary quality sheet glass, area exceeding 0.50 Sqm in each pane with necessary fittings like rubber beading, glazing clips etc complete all as specified & directed .
Supply and fixing in repair stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples/ wooden beading all as specified and directed .
Material and labour for cutting holes in brick walls in cement mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 for depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall exc. half brick but not exc one brick as required complete all as specified and directed.
Material and labour preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, not otherwise described, and treated with tar or coal tar black paint including sanding existing tarred or painted surfaces with clean sharp sand complete all as specified and directed.
Supply and fixing 100mm Butt hinges (Size of hinges in mm), medium weight, cold rolled, stainless steel ISI marked, and fixed all as specified.
Material and labour for preparing of new wooden surfaces of any description over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, as approved complete all as specified and as directed.
Supply and fixing in repair steel rolling shutters 1.00mm thick in laths, without ball bearing, as specified including top cover anchoring rod, hasp and staple, push pull or manual type and one coat of primer, erected in position complete all as specified and as directed.
Material & labour for complete removal of existing treatment and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over new surfaces complete all as specified and as directed.
Material & labour for preparation of new plastered surfaces and applying two coat of white wash on ceiling complete all as specified and as directed.
Material and labour for PCC 1:2:4, type B-1 (using 20mm graded stone aggregate) as in coping and kerbs etc, finished even and smooth with using extra cement complete all as specified and as directed.
Material and labour for preparing new surfaces of roof and applying two coats of Polyurethene (PU) acrylic based Water proofing liquid compound over and including a coat of diluted elastomeric self primer and reinforcement fabric sheet as per manufacturer's instruction to stop leakage/seepage from roof/wall complete all as specified and directed by the Engineer-in-Charge. Note :- Quoted rate shall be deemed to be included for work in buildings/ structure of any height.
Supply and fixing framed work as in roof trusses, purlins, crane gantries, rails and fastening and heavy bracket framing (beam, teel, angle, channel or flat or tubular section) including distance pieces, cleats etc conforming to Fe 290 (Gde E-165) complete all as specified and as directed.
Material and labour for preparation of new steel surfaces over 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.
Supply and fixing pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
Supply and fixing pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in ridges, fixed with self tapping screws as specified.
Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, including surface finished even and smooth without using extra cement, laid in panels not exceeding 3 m long and joints shall be filled with the mixture of bitumen and sand in 1:3 by weight complete all as specified and as directed.
Material and labour for 20-25 mm thick machine cut mirror polished Kota stone slab as in flooring laid over and including 20mm thick cement screed bed in CM 1:4, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including necessary grinding, rubbing, rounding off exposed edges and mirror polishing complete all as specified and directed.
Material & labour for granite of 18mm to 20mm thick with uniform texture (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, WHB counters, urinal partitions and like, laid over and includind 15mm thick screed bed in CM (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour stone including making and polishing bevelled edges of corner, moulding etc complete all as specified & directed .
Material and labour for refixing old steel tubing & connections in new or old position (Walls, ceiling, floors etc.) of 20mm bore including necessary new fittings complete all as specified and as directed .
Material and labour for refixing old steel tubing & connections in new or old position (Walls, ceiling, floors etc.) of 15mm bore including necessary new fittings complete all as specified and as directed .
Supply and fixing GI Tubes "medium grade" (Walls, ceiling, floors etc.) of 20mm bore including necessary new fittings complete all as specified and as directed .
Supply and fixing GI Tubes "medium grade" with all fitting & fixed complete to walls & ceilings or laid in floors of 15 mm bore complete all as specified and as directed by Engineer-in-Charge.
S&F for PVC coated galvanised iron chain link fencing, made of GI wire dia not less than 3 mm and minimum dia 4.5 mm after PVC coating, having 50 mm x 50 mm mesh size including line wire, any type of standards, rails, straining bolts, etc including provision of binding wire, fixed as knuckled type complete all as specified and as directed . ( Note :- 2 layer of Line wire 10mm dia bar shall deemed to be included in rate quoted)
Excavation in posts holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm in soft/disintegrated rock complete all as specified and as directed.
Material and labour for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundations, filling and mass concrete all as specified and as directed.
Material & labour for providing and laying factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed .
Material and labour for 150 mm thick hardcore of basalt/trap broken stone gauge exc 63 mm but n.exc 100 mm size, deposited, spreading and levelled in layers and watered and rolled, rammed to true surfaces all as specified and directed.
Material & labour for 75 mm thick PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) as in sub base etc complete all as specified & directed .
Material & labour for providing and laying 80 mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved color, design & pattern as in footpath, parks, lawns, drive ways or light trafic parking etc, of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour and pattern over and including 50 mm thick compacted bed of fine clean sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed .
Material and labour for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc complete drilled for fixing of steel sheeting or other covering, doors etc to be prepared for hanging or sliding with and including either hooks and hinges or steel haging door fittings and hanging complete of steel conforming to grade Fe-290 (Gde E-165) complete all as specified and directed .
Supply and fixing in repair dual function type, flushing cistern PVC valveless, syphonic action type, flushing cistern on capacity 10 Ltr, low level, white, with inlet, ball valve, float and handle including brackets & PVC bend of suitable size complete all as specified and directed.
Supply and fixing in repair vitreous china squatting pan, orrisa pattern size 580×440mm size white with 'P' or 'S' trap water closet including foot rest, and necessary PCC required to fix squatting pan complete all as specified and as directed.
Supply and fixing in repair for 15mm bore pipe angle cock (concealed type) fancy type, chromium plated long shank and cup concealed type screwed both ends for iron pipes or for union etc complete all as specified and as directed.
Supply and fixing in repair for 15mm bore pipe bib tapes long body brass, chromium plated, fancy type screwed down high pressure with crutch or butter fly handle, screwed for iron pipe or brass ferrule, unions etc complete all as specified and as directed.
Supply and fixing in repairs 110mm grating round/square of PTMT (Miniumum weight 100 gm) openable (two piece type) complete all as specified and directed.
Supply and fixing in repairs PVC connection 15mm bore size with PTMT nuts of length 600mm complete all as specified and directed.
Supply and fixing in repairs vitreous china urinal half stall type urinal white (back or corner wall type) including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in white cement, fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified and as directed.
Supply and fixing in repairs vitreous china wash hand basin, white flat back size 550x400mm (excluding taps, waste, pipe chain and plug) but including porcelain stopper and a pair of MS bracket etc. complete all as specified and directed.
Supply and fixing in repairs Vitreous China, wash down water closet (pedestal pattern) water closet with P or S trap, white colour including white plastic seat cover, connection to drain (or outgoing pipe) and to flushing pipe complete inluding fixing bolts etc. all as specified and directed.
Supply and fixing in repair for 15mm bore pipe Pillar taps fancy type, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed.
Keystone Constructionare
VIKAS CONSTRUCTION CO.
M/s Pal Builders
POOJA CONSTRUCTION
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .