REPAIR TO ROAD AND ROAD SIDE FURNITURE OF TECHNICAL AND RESIDENTIAL AREA OF DEAL AND IRDE UNDER GE(I) RND DEHRADUN

Amount

M&L for grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance exc. 200 but n exc. 250 m and clearing site complete all as specified and directed.

Taking down existing cat eye of any description and refixing in position after paving complete all as specified and directed.

Taking down existing road studs of any description and refixing in position after paving complete all as specified and directed.

S&F in repair of traffic mirror/convex mirror size 600mm dia used for blind spots at internal lanes, parking and many more to get a superior view of surrounding area, impact resistance and distortion free, its quality glass, perfect finish, extensive area converage on the mirror and smooth surface, eco friendly, light weight and come with fixtures FRP is used in making brim and back holding plates, single piece poly carbonate used for greater damage resistance, incl cost of standard fixign, cost of labour and materials etc. complete as per company specification complete all as specified and directed.

S&F MS work as in joist, channel, angle sections etc. fixed independently without connecting plate cut to ordinary length confirm to Fe-410 (Gde E-250) complete all as specified and directed.

Excavation in hard/dense soil for post holes each not exc. 0.50 cum each and getting out returning filling in and ramming earth or broken rubbles in layers not exc. 25cm watering removing surplus soil to a distance 50m complete all as specified and directed.

M&L for PCC 1:3:6 type C2 using 40mm graded aggregate in foundation filling and mass concrete complete all as specified and directed.

M&L repair to pot holes of any depth n. exc. 1 Sqm each including sweeping free from dust & mud or water scoring sunken surfaces in roads, paths etc. cutting around edges to at least 25 mm in depth and making good by and applying evenly a priming tack coat with bituminous primer (Viscosity Grade Bitumen VG-30) @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder (Viscosity Grade Bitumen VG-30) 9.8 Kg/10 Sqm, blinded with 0.09 Cum of stone chipping, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chipping), depth of pot hole exc 30 mm complete all as specified and directed.

Preparing of black top surface by brushing with mechanical broomer for removing caked mud etc. and sweeping with mechanical broomer and finally with air compressore to remove all loose dirt etc complete all as specified and directed.

Applying evenly a priming/tack coat with paving bitumen VG-30 @ 05 kg per 10 Sqm over black top surface complete all as specified and directed.

Bituminous premix asphaltic semi dense concrete 40mm avg consolidated thickness using VG-30 with 5.5% binder content by weight of total mix, rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed. Note- The mixed materials for Premix Carpet shall be obtained from HOT MIX Plant and shall be laid with Mechanical Paver.

Preparing of existing old surface by brushing with wire brushes for removing caked mud etc. and sweeping with mechanical broomer and finally with air compressore to remove all loose dirt and applying even priming/tack coat with bituminious primer at @ 10 Kg/10 Sqm using VG-30 paving bitumen complete all as specited and directed.

Premix bituminious macadam laid/rolled with power roller 8 to 12 tone roller and compacted to required gradient & camber by mechnical paver (consolidated thickness 75mm or less) and binder content 4% (viscocity grade bitumen VG-30) by weight of total mix all as specified laid over priming/ tack coat. Note :- Preparing of surface and priming coat will be measured and paid for separate under relevant item) complete all as specified and directed.

M&L for Preparation of new/old road surfaces and applying thermoplastic reflective paint in marking of minimum 1.5 mm thick single coat as in centre line and edge line, zebra crossing etc road marking of 150/100 mm width using ‘HOT MARK thermoplastic paint (Hot Application) by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter filler, thermoplastic requirement for glass beads shall be the table No 800.4 of MOST specification including spraying of glass beads etc all as per manufacture’s instructions complete all as specified and directed.

Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per anufactures instructions complete all as specified and directed.

S&F in repair Solar Stud body made from alluminium alloy. Solar powered by monocrystal solar panal (1.2V/3watt). Type of battery : One high capacity Ni-Cd rechargeable battry (1.2V/1600MA) LEDs: 10mm, total 6 pieces 3 on each side. View distance qppox 1000 mtrs 12 hours of continous lighting at night. Mounted on concrete or road size 125mm x 125mm x 25mm (60mm shank) with 06 LED's 03 on each side complete all as specified and directed. Cat part No :- SS-02 of Make SIGNTECH or equivelent model of 3M, Dark Eye, Tatq make as approved by GE.

S&F in repair road delineator of 50mm dia MS pipe polythene painted and hight of 775mm with a final performance reflector of dia 10mm and 3 Nos. of high intensity reflective hand complete all as specified and directed. Make: Dark Eye/3M/Heripa

M&L for preparing of new or previously untreated steel surfaces over 10cm width or girth and applying two coat of synthetic enamel paint on steel surfaces over red oxide primer complete all as specified and directed.

SARASWATI CONSTRUCTION CO (BID ID -3087626)

M/S BRIJPAL SINGH MALIK (BID ID -3076978)

M/S VIJAY TRADERS (BID ID -3092576)

M/S Manmohan Singh Anand (BID ID -3079708)