Constructing Approach Road from Lokhan Village to Thuravas Village at Hathmati Reservoir Project Ta Himatnagar

Sr No Items Qty Unit Rate Amount

Clearing and grubbing road land including uprooting rank vegetation

grass bushes,shrubs,sapling and trees girth up to 300 mm removal of

1 stumps of trees cut earlier and disposal of unserviceable materials 0.90 Ha 28455.090

(C) By mechanical means in area of light jungle

Earthwork/Back filling with selected earth including watering

2 ramming,Compaction with pnuematic temping with all lead and all 3043.00 Cum 144.500

lift etc complete.

Providing & Laying in position "NOMINAL MIX" cement concrete

using cement, sand and crushed aggregate by mass and machine mix

for C.C./R.C.C work incl. necessary formworks centering,

3 scaffolding, compaction by vibrator, curing as directed with all lead 968.00 Cum 3346.00

& lift etc complete Without Dewatering and excluding cost of steel

reinforcement. (A) For Foundation concrete / General purpose(a) C.

C. Nominal Mix, M-10 and MSA-40 mm

Providing and casting in situ ordinarycement concrete M-200 for

average 75 mm thick wearing coat laid as directed including tamping

,vibrating, finishing, curing and filling in joints with bitumen 2484.00 Cum 4304.140

Providing TMT Bar FE 500D reinforcement for R.C.C. work

5 including bending, binding and placing in position complete 26501.56 kg 77.290

upto floor two level

Providing, laying, spreading and compacting stone aggregates of

specific sizes to water bound macadam (Grade-II) (B.T. Metal of size

45 to 63 mm) specification including spreading in uniform thickness,

hand packing, rolling with 3 wheeled steel/ vibratory roller in stages

6 to proper grade and camber, applying and brooming requisite type of 968.00 Cum 1452.700

screening/ binding Materials to fill up the interstices of coarse

aggregate, watering and compacting to the required density.

Providing & spreading Quarry spall for side sholder including

breaking clods.dressing with all lead and lift including watering and

consolidation with vibratory roller including filling in depression

which occure during the process as directed

Excavation for foundation upto 1.5 m depth including sorting out

and stacking of useful materials and disposing off the excavated stuff

8 upto 50 Meter lead.(A) Loose or soft soildirected etc complete in 1154.00 Cum 122.990

varying lead upto 500 m and with all lifts. (By Machinery)Excluding

Providing and fixing in position (different diameter) I.S.,NP-3 class

reinforced pipe with caulking the joints with cement mortar 1:1

9 proportion,using jute string soaked in cement slurry, finishing joints

and laying pipes to the designed grade and levels, curing etc.

complete for all leads and lifts.

(A) NP-3 class 900 MM dia pipe. 15.00 Rmt 2857.700

(B) NP-3 Class 1200 mm dia pipe 32.50 Rmt 5955.300

(C ) NP-3 Class 600 mm dia pipe 10.00 Rmt 2039.600

Box cutting the road surface to proper slope and camber for making

a base for road work including removing the excavated stuff and

depositing on the road side slope as directed upto 50Mt.lead

Road marking with hot applied thermoplastic paints with

reflectorising glass beads on finished Road surface providing and

laying a hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of

2.5mm is excluding of surface applied glass beds as per IRC:35-

2015. The finished surface to be level, uniform and free from streaks

and holes. zebra patta /bump patta lane/center line/ edge line/cut

patta. The white color marking should provide liminance coefficinet

on cement road shalll be min 130 mcd/m2/lux and Asphalt road shall

be min 100 mcd/m2/lux during the service life during the day time.

The marking should meet the performance criteria for night time

reflectivity, wet reflectivity and skid resistance as mentioned in the

section-15 of IRC 35-2015. Warranty for the Retro reflectivity

should be two years

Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks

Raised Pavement Markers made of polycarbonate and ABS moulded

body and reflective panels with micro prismatic lens capable of

providing total internal reflection of the light entering the lens face

and shall support a load of 13635 kgs. tested in accordance to ASTM

D 4280 Type H and complying to Specifications of Category A of

MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06.

The height, width and length shall not exceed 20 mm, 130 mm and

130 mm and with minimum reflective area of 13 Sqcm on each side

and the slope to the base shall be 35 +/- 5 degree. The strength of

detachment of the integrated cylindrical shanks, (of diameter not less

than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the

body is to be a minimum value of 500 Kgf. Fixing will be by drilling

holes on the road for the shanks to go inside, without nails and using

epoxy resin based adhesive as per manufacturers recommendation

and The color of the marker should be as per the IRC 35 2015 and as

directed by Engineer-in-charge.

Cautionary Warning Sign :-Providing and fixing sign boards made

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 90 x 90 x 90 cms. equilateral triangle as per design of

IRC-67-2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best quality

epoxy paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

13 bestquality epoxy coatings in black and white bends. The details of 3 No 3906.190

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x

60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years

for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party

test lab for the product offered shall be submitted by contractor. (B)

Class-B Type-4 Retro Reflective sheeting

Regulatory / Mandatory Sign :-Providing and fixing sign boards

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 60 cms. Dia Circle as per design of IRC67-

2012. Pre treated with phospheting process & acid etching; coated

with one coat of epoxy primer and two coats of best quality epoxy

paint ; reflectorised with High Intensity Prismatic Grade retro

refiectivesheeting of Type-4 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of Iron Angle 75 x

75 x 6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

14 bestquality epoxy coatings in black and white bends. The details of 3 No 3540.120

symbol for each board shall be as per the instruction of engineer in

charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x45 x

60 Cms. for each leg including excavation, curing etc.complete

under the supervision of engineer in charge. A warranty for 7 years

for the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third party

test lab for the product

offered shall be submitted by contractor. (B) Class-B Type-4 Retro

Reflective sheeting.

Deputy Executive Engineer

Executive Engineer

Himatnagar Irrigation Sub Division No.1 Sabarkantha Irrigation Division

Himatnagar Himatnagar