SPECIAL REPAIR OF BARBED WIRE FENCING APPROX 2 KM AROUND MT GARAGE AREA OF CERTAIN LOCATION UNDER GE (S) BINNAGURI

Amount

Dismantling post or strut any section including taking out embedded portion and making good disturbed ground post embedded natural ground complete all as specified.

Ditto but post embedded in concrete brick and masonry ground etc complete all as specified.

Dismantling fencing wire mesh, any type complete all as specified.

S&F galvanised 2 strand , steel barbred wire (type ‘A’ and designation class 5) 2.24mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails straining bolts, including , securing or tying at crossings with mild steel wire, staples or steel pins, etc. as directed(each line wire to be measured) complete all as specified.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removal excess soil to at a distance 50 m and making good surface(soft or loose soil) complete all as specified.

M&L for Cement concrete type D2 1:4:8 (40mm graded aggregate)in foundations filling and mass concrete including demoilition od old one complete all as specified.

M&L RCC 1:1½:3 type A1(nominal mix, using 20 mm graded aggreagte) as in precast fencing post or struts average sectional area exceeding 100 but not exc 250 sq cm with or without chamfered angle including necessary formwork complete all as specified and directed. Note: Reinforcement shall be measured and paid for separately.

M& L for Cement concrete in foundations, filling and mass concrete type c-2 1:3:6 using 40 mm graded aggegrate as in pcc band at ground level to hold the bottom of post etc complete all as specified.

S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified.

All as per item No.9 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders complete all as specified.

As per item no 9 bove but 6mm dia round bar as in nibs complete all as specified.

M&L in repair for flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified.

Supply and fixing of chain link MS galvanaised fencing 4.0 mm dia and 100 mm x100 mm mesh,made up into mattressess or cage including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified.

Supply and fix mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with one hexagonal or square nut. Length of bolt exceeding 5 cm and not exceeding 10 cm and diameter of shank 5 mm to 10 mm all as directed.

L. B. SHARMA

Biswanath Sharma

R K AGARWAL

SS SHARMA

SINGH & CO

M/S VIRENDRA KUMAR SINGH

M/S MOHAN KUMAR BANSAL