Supply and Installation of Outdoor Lights at the Commercial Building, Technopark Phase I Campus

Amount

3m Cylindrical Post Top Pole – GI + PU Painted Standard 3-meter high cylindrical pole made of hot dip galvanized mild steel with black PU paint finish. Pole to be vertically cast in concrete using a mounting template; the threaded portion above plinth level shall be galvanized. Internal arrangements shall include 6A SP MCB, neutral link, earth termination point, and a 16A, 4-pole terminal block for end termination of cables. Refer technical details in tender document for more insight.

Supply of street light pole and all accessories including junction box etc.

Installation of street light pole including foundation, terminal/junction box etc.

30W Pole Top LED Light Fixture 30W pole top LED fixture made of pressure die-cast aluminium housing with corrosion-resistant powder-coated finish for optimal heat dissipation. CCT between 5500K – 5700K, with in-built surge protector, high-efficiency reflectors, and impact-resistant design. Minimum luminous efficacy > 80 LPW. Fixture shall have IP66 or higher ingress protection, Ik 08 or higher rated and operate on 220–240V AC, with a wide input voltage tolerance of 140V–275V AC. Equipped with integral constant current driver, Power Factor > 0.95, and THD < 10%. Designed to operate in ambient temperature range of 0°C to 50°C. Model reference : LT Trumpet or Wipro Bliss or similar

Supply

Installation, Testing and commissioning

24V, 10–12W/m IP67 LED Strip Light 24V DC flexible LED strip of 10–12W/m, double-layered with 120 LEDs per meter, CCT 5500K–6000K, delivering uniform, spotless diffused illumination. Strip shall be IP67 rated, with silicone encapsulation for outdoor architectural use. System efficacy not less than 20 LPW. Suitable for ambient temperatures in outdoor environments. Supplied with all necessary surface mounting accessories for proper and secure installation. Precisely cuttable and rejoin as per the design requirement. Model reference : LT Maze neo or Neon Flexi top bend or similar

Supply

Installation, Testing and commissioning

LED Power Supply Driver LED driver designed to operate on 180–270V AC, 50Hz input, with regulated 24V DC output to ensure stable, flicker-free illumination. Power rating: 60–70W, suitable for medium-length LED strip lighting. Driver shall include built-in protection against short circuit, overload, overvoltage, and over-temperature. Enclosure shall be minimum IP66 rated for outdoor/damp use. Cooling may be passive or active as per design, with provision for surface or wall mounting inside lighting panels or junction boxes.

Supply

Installation, Testing and commissioning

15–20W Designer Pendant Light Suspended designer metal build pendant light with black housing, operating at 230V, efficacy > 80 lumens/watt, and Cool White CCT (5000–5500K). Fixture shall have IP20 or higher protection, suitable for indoor decorative applications. Model reference: Wipro Vertica or similar

Supply

Installation, Testing and commissioning

65–70W Outdoor LED Flood Light LED flood light with a power rating of 65–70W, operating at 230V AC, delivering efficacy > 110 lumens/watt, with Cool White light (5000–5500K). The fixture shall have a minimum IP66 protection rating, suitable for outdoor architectural and area lighting.

Supply

Installation, Testing and commissioning

20W LED Surface Batten 20W surface-mounted LED batten light operating at 230V, with efficacy > 100 lumens/watt, Cool White (5000–5500K) light output. Fixture shall be IP20 rated or higher, suitable for indoor general-purpose illumination.

Supply

Installation, Testing and commissioning

10W LED Bulkhead Light 10W surface-mounted LED bulkhead fixture, suitable for wet or semi-outdoor locations, operating at 230V, with efficacy > 100 lumens/watt, Cool White (5000–5500K) CCT, and minimum IP65 protection rating.

Supply

Installation, Testing and commissioning

36W 600x600mm Recessed LED Panel Light 24W 600×600 mm square LED panel, recess-mounted, operating at 230V AC, with efficacy > 100 lumens/watt, and Cool White CCT (5000–5500K). Fixture shall be IP20 rated or higher, suitable for indoor false ceiling applications with uniform light distribution.

Supply

Installation, Testing and commissioning

Supplying and fixing sintex box (weatherproof) of size 300x200x105mm with MCB rails arrangment of IP65 or above on surface suitable for installing single pole MCB/Isolators complete with connections, testing and commissioning etc. as required

Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB's (butwithout MCB's and incomer ) as required .

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.

Supplying and fixing following rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following pole in the existing MCB DB complete with connections, testing and commisioning.

5A to 32A ,SP MCB

5A to 32A ,TP MCB

MCB Dummy

Supplying, installation, testing, and commissioning of following 16A DIN rail-mounted digital astronomical time switch (230V AC, 50Hz) with SPST output, LCD display, 1-min switching interval, time drift ≤ ±1 sec/day, non-volatile memory or battery backup, relay status indication, manual override, IP20 protection, and compliance to EN 55015, IEC 61000-6-1/6-3, and EN 60730-1, complete with on-site programming as required.

1 output per phase and suitable for single phase supply

Supply and Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation and refilling the trench using excavated soil etc as required, but excluding sand cushioning and protective covering.

2Cx 10 sqmm XLPE Al cable

2Cx 6 sqmm XLPE Al cable

Supply and Laying/fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following sizes in the existing TRAY/RCC/ HUME / STONE WARE/ GI/ DWC pipe / Concrete trench/Clamping on wall etc. as required.

4Cx 50 sqmm XLPE Al cable

4Cx 25 sqmm XLPE Al cable

2Cx 10 sqmm XLPE Al cable

2Cx 6 sqmm XLPE Al cable

Supplying and making end termination with brass compression gland and aluminium lugs with Gland earthing for following size of PVC insulated and PVC sheathed / XLPE aluminium/Cu conductor cable of 1.1 KV grade as required.

4Cx 50 sqmm XLPE Al cable

4Cx 25 sqmm XLPE Al cable

2Cx 10 sqmm XLPE Al cable

2Cx 6 sqmm XLPE Al cable

Supplying and making straight through joint with cast resin compound including ferrules and other jointing materials for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.

4Cx 25 sqmm XLPE Al cable

Supply and erection of vertical and horizontal type cable trays and cable supports fabricated out of MS angles (ISA) and MS flats with sufficient width and spacing between successive cross members and supported at adequate spacing. The cable trays and supports shall be painted with two coats of Zinc Chromate primer and two coats of enamel paint. (Size as specified by Technopark as per site conditions)

Supplying and drawing following sizes of 1.1kV FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed PVC conduit as required.

2Rx1.5sqmm with 1R 1.5sqmm Green wire for earthing

2Rx2.5sqmm with 1R 1.5sqmm Green wire for earthing

Supplying and fixing of 25mm of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.

Supplying and fixing of 20mm of PVC flexible conduit along with accessories in surface

Supplying and fixing of 4 Module (125mmX75mm), GI box alongwith modular base & cover plate for modular switches in recess etc as required.

Supplying and fixing of 5/6 amps modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.

Wiring for One light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Wiring for two light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Providing and fixing 8 SWG dia G.I. wire on surface or in recess for loop earthing as per IS:3043 along with existing surface/ recessed conduit/ submain wiring/ open trench / walls / pulling through pipes/cable as required in open trench / walls / pulling through pipes/cable etc as required.

Supply, laying/fixing of 10 SWG copper for earthing of switchboard and jointing as per IS:3043 / 87 in open trench / walls / pulling through pipes etc as required.

Fathima Engineering Co. Pvt. Ltd. (BID ID -2233473)

Leela Electricpower Services Pvt.Ltd (BID ID -2237486)