Junction Development at South Gate GIFT City.

Name of Work : Junction Development at South Gate GIFT City. Dist. Gandhinagar

BILL OF QUANTITIES

Item Description of Item

Quantity Unit Rates In Figure Amount

No. (with brief specification and reference to book of specifications)

[1] Clearing and grubbing road land including uprooting rank 2.60 Hecter 28455.09

vegetation, grass, bushes, shrubs, saplings and trees girth up to

300 mm, removal of stumps of trees cut earlier and disposal of

unserviceable material. (C) By mechenical means in area of light

[2] Earthwork for embankment including breaking clods, dressing 3540.00 Cum 177.91

with all lead and lift and including watering rolling and

consolidation of subgrade in layers at O.M.C. to required dry

density including filling the depression which occur during the

process using power roller 8T to 10T.(E) From Borrow area with

all lead and lift

[3] Earthwork in cuting in all sorts of soil and soft murrum including 7370.00 Cum 134.13

conveying and spreading the stuff, embankment as and where

directed within 200meters from the end of the cutting with all

required lead and lift.

[4] Rolling of earthwork in layers with power roller including filling in 7370.00 Cum 13.42

depressions which occur during the process including watering of

earthwork as directed.

[5] Box cutting the road surface to proper slope and camber for 16019.00 Cum 109.24

making a base for road work including removing the excavated

stuff and depositing on the road side slope as directed upto

[6] Construction of sub-grade with approved material obtained from 8169.00 Cum 778.71

borrow pits with all lifts & leads, transporting to site, spreading,

grading to required slope and compacted to meet requirement of

table No. 300-2 Subgrade CBR ≥ 10 (As per Code No. 3.18)

[7] Construction of granular Sub base by providing natural coarse 5374.00 Cum 866.58

graded material using 26.5 mm to 9.50 mm@ 45%, aggregate

incl. spreading in uniform layers with motor grader on prepared

surface mixing by mix in place method with rotavator at OMC

and compacting with vibratory roller to achieve the desired

density complete as per Clause 401.2 Table 400.1 grade-VI

[8] Providing and laying spreading and compacting graded stone 4350.00 Cum 1838.20

aggregate to wet mix macadam 300 mm thick as per MORT&H

specification including pre mixing the material with water at

OMC in mechanical mix plant, carriage of mixed material by

tippers to site, laying in uniform layers with paver in sub base/

base course on well prepared surface and compacting with

vibratory roller to achieve the desire density.

[9] Providing & laying priming coat with emulsion SS-1 grade and 17259.00 Sqm 93.93

spraying emulsion with spray set fitted on mechanical bouzer

using emulsion at the rate of 7.5 Kg./10 Sqm. On WMM surface

incl. cleaning the surface etc. complete.

[10] Providing and laying 75 mm D.B.M. with B.T. Aggregate as per 2929.00 MT 4924.76

MORT&H specification with VG-40 for tack coat @ 2.5 Kg./10

smt. With Mechanical Sprayer & Bitumen VG-40 Grade for mixing

@ 45.00 Kg./MT. ie. 4.5 % by total weight of mix heating and

mixing the aggregate & asphalt in continuous batch mix plant and

transporting to site and spreading the same by sensor paver

finisher & consolidation with vibratory roller including providing

all materials equipments, tools & plant, fire wood, oil, kerosene,

labour charges etc. complete using contractor's own machinery

batch mix plant & sensor paver finisher etc. complete.

[11] Providing and laying Bituminous concrete 40 mm on existing 1630.00 MT 5527.73

bituminous surface and using specification graded machine

crushed with 5.50 % bitumen VG-40 grade by Wt. of total mix as

per specification MORTH including mixing of asphalt with B.T.

chips in continuous batch mix plant transporting same as by

Sensor paver finisher and consolidation the same with pair of

tonnes to 10 tonnes vibratory roller to achieve desire density and

including VG-40 grade bitumen, cost of emulsion, cost of

required tools , plants, all machineries, equipment fire wood

oil, kerosene, charges etc.complete.

[12] Providing 150 mm thick compacted side shoulder of Quarry Spall 142.88 Cum 1032.11

on road site including collection of material spreading, rolling of

watering etc. complete as directed.

[13] Road marking with hot applied thermoplastic paints with 706.00 Sqm 367.72

reflectorising glass beads on bitumin surface providing and laying

a hot applied thermoplastic compound 2.5 mm thick including

reflectorising glass beads @ 250gms per sqm area, thickness of

2.5mm is excluding of surface applied glass beds as per IRC:35-

2015. The finished surface to be level, uniform and free from

streaks and holes. zebra patta /bump patta lane/center line/

edge line/cut patta. The white color marking should provide

liminance coefficinet on cemend road shalll be min

mcd/m2/lux and Asphalt road shall be min 100 mcd/m2/lux

during the service life during the day time. The marking should

meet the performance criteria for night time reflectivity, wet

reflectivity and skid resistance as mentioned in the section-15 of

IRC 35-2015. Warranty for the Retro reflectivity should be two

Cat Eye / Road Stud / RPM: Supplying of Molded Twin Shanks 929.00 No. 326.23

Raised Pavement Markers made of polycarbonate and ABS

moulded body and reflective panels with micro prismatic lens

capable of providing total internal reflection of the light entering

the lens face and shall support a load of 13635 kgs. tested in

accordance to ASTM D 4280 Type H and complying to

Specifications of Category A of MORTH Circular No

RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and

length shall not exceed 20 mm, 130 mm and 130 mm and with

minimum reflective area of 13 Sqcm on each side and the slope

to the base shall be 35 +/- 5 degree. The strength of detachment

of the integrated cylindrical shanks, (of diameter not less than

+/- 2 mm and height not less than 30+/- 2 mm) from the body is

to be a minimum value of 500 Kgf. Fixing will be by drilling holes

on the road for the shanks to go inside, without nails and using

epoxy resin based adhesive as per manufacturers

recommendation and The color of the marker should be as per

the IRC 35-2015 and as directed by Engineer-in-charge.

[15] Cautionary Warning Sign :-Providing and fixing sign boards made 12.00 No. 5077.27

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 90 x 90 x 90 cms. equilateral triangle as per design of

IRC-67-2012. Pre treated with phospheting process & acid

etching; coated with one coat of epoxy primer and two coats of

best quality epoxy paint ;reflectorised with Micro Prismatic

Grade retro refiective sheeting of Type-11 as per ASTM D-4956

and latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x

75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted

with bestquality epoxy coatings in black and white bends. The

details of symbol for each board shall be as per the instruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC block of

size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

[16] Regulatory / Mandatory Sign :-Providing and fixing sign boards 18.00 No. 4618.73

made out of 2mm aluminium sheet / 4mm ACP (Aluminum

composite Panel); size 60 cms Dia Circle as per design of IRC-67-

2012. Pre reated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x

6mm / 65NB Circular MS Pipe as required and frame fabricated

from suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details

of symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

[17] STOP Sign :-Providing and fixing sign boards made out of 2mm 2.00 No. 7213.42

aluminium sheet / 4mm ACP (Aluminum composite Panel); size

90 cms Octagone as per design of IRC-67- 2012. Pre treated with

phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro refiectivesheeting

of Type- 11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.6mtr long stand post of 75 x 75 x 6mm /

65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details

of symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

[18] Direction (Junction) Sign :-Providing and fixing sign boards made 6.00 No. 26572.09

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 244x122 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand post of

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 50 x 50 x 5mm; painted

with bestquality epoxy coatings in black and white bends. The

details of symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

[19] Distance Informatory / Destination Sign :-Providing and fixing sign 6.00 No. 20918.11

boards made out of 2mm aluminium sheet / 4mm ACP

(Aluminum composite Panel); size 180x120 cms. rectangular as

per design of IRC-67-2012. Pre treated with phospheting process

& acid etching; coated with one coat of epoxy primer and two

coats of best quality epoxy paint ;reflectorised with Micro

Prismatic Grade retro refiectivesheeting of Type-11 as per ASTM

D- 4956 and latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.)

stand post of 75 x 75 x 6mm / 65NB Circular MS Pipe as required

and frame fabricated from suitable size iron angle of 50 x 50 x

5mm; painted with bestquality epoxy coatings in black and white

bends. The details of symbol foreach board shall be as per

theinstruction of engineer in charge. The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the

Retroreflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

[20] Place Identification Sign :-Providing and fixing sign boards made 6.00 No. 14085.46

out of 2mm aluminium sheet / 4mm ACP (Aluminum composite

Panel); size 150x90 cms. rectangular as per design of IRC-67-

2012. Pre treated with phospheting process & acid etching;

coated with one coat of epoxy primer and two coats of best

quality epoxy paint ;reflectorised with Micro Prismatic Grade

retro refiectivesheeting of Type-11 as per ASTM D-4956 and

latest M.O.S.T.Specifications; 4.0mtr long (2 Nos.) stand post of

75 x 75 x 6mm / 65NB Circular MS Pipe as required and frame

fabricated from suitable size iron angle of 35 x 35 x 3mm; painted

with bestquality epoxy coatings in black and white bends. The

details of symbol foreach board shall be as per theinstruction of

engineer in charge. The fixing at site shall be in 1:2:4 CC blockof

size 45 x 45 x 60 Cms. for each leg.including excavation, curing

etc.complete under the supervision of engineer in charge. A

warranty for 10 years for the Retro reflective sheeting from

original manufacturer & a certified copy of 3 year outdoor

exposure test report from third party test lab for the product

offered shall be submitted by contractor. (A) Class-C Type-11

Retro Reflective sheeting

[21] Village Name Sign :-Providing and fixing sign boards made out of 2.00 No. 6313.51

2mm aluminium sheet / 4mm ACP (Aluminum composite Panel);

size 90x60 cms. rectangular as per design of IRC-67-2012. Pre

treated with phospheting process & acid etching; coated with

one coat of epoxy primer and two coats of best quality epoxy

paint ;reflectorised with Micro Prismatic Grade retro

refiectivesheeting of Type-11 as er ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3mtr long stand post of 75 x 75 x 6mm /

65NB cular MS Pipe as required and frame fabricated from

suitable size iron angle of 35 x 35 x 3mm; painted with

bestquality epoxy coatings in black and white bends. The details

of symbol or inscription/letters / numerals for each board shall

be as per the instruction of engineer in charge. The fixing at site

shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each

leg.including excavation, curing etc.complete under the

supervision of engineer in charge. A warranty for 10 years for the

Retro reflective sheeting from original manufacturer & a certified

copy of 3 year outdoor exposure test report from third party test

lab for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

[22] Chevron sign :-Providing and fixing sign boards made out of 5.00 No. 4681.35

1.5mm aluminium sheet / 3mm ACP (Aluminum composite

Panel); size 60x50 cm as per design of IRC-67- 2012. Pre treated

with phospheting process & acid etching; coated with one coat of

epoxy primer and two coats of best quality epoxy paint

;reflectorised with Micro Prismatic Grade retro refiectivesheeting

of Type- 11 as per ASTM D-4956 and latest

M.O.S.T.Specifications; 3.3 mtr long stand post of 75 x 75 x 6mm

/ 65NB Circular MS Pipe as required and frame fabricated from

suitable size iron angle of 50 x 50 x5mm; painted with bestquality

epoxy coatings in black and white bends. the details of symbol or

inscription / numerals for each board shall be as per the

instruction of engineer in charge.The fixing at site shall be in

1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including

excavation, curing etc.complete under the supervision of

engineer in charge. A warranty for 10 years for the Retro

reflective sheeting from originaa manufacturer & a certified copy

of 3 year outdoor exposure test report from third party est lab

for the product offered shall be submitted by contractor. (A)

Class-C Type-11 Retro Reflective sheeting

[23] Providing & fixing overhead gantry Sign Board high intensity 1.00 No. 1380351.85

grade retro refletive informatory/ Destination Boards 2(six) Nos.

made out of 2mmaluminum sheet, size 180x120cms rectagle as

per the design of IRC-67-2012. Pre-treated with phospheting

process and acid-etching coated with one coat of epoxy primer

and two coats of best quality epoxy paint, reflectorised with retro

refletive sheeting as per latest MOST specification. Letters and

numerals should be as per IRC-30-1968. The details of symbol of

inscription/ Numerals for each board shall be as per the

instruction of engineer in charge. The board shall be mounted on

high level over head type portal frame (Gantry) made out of M.S.

section of suitable side as per detailed drawing / design including

cost of erection and painting.

[24] Providing & Fixing Overhead Informatory Cantilever type sign 2.00 No. 252547.68

boards made out of 4mm Aluminum Composite Material sheet

size 3.6mt x 2.1mt as per detailed drawing with prefreated with

photopheting process & acid etching coated with one coat of

epoxy primer and two coats of best quality epoxy paint refectised

with retro reflective sheeting ASTM D-4956 Type-XI as per latest

IRC and M.O.S.T.Specification, Total Post of 7.6mtr high of size

250NB (273mm OD 6mm Thick) and structure frame made from

80NB and 25NB as per the drawing. The Sign facia frame

fabricated from suitable size iron angle of size 40x40x5mm as per

drawing painted with best quality epoxy coating, the details of

symbol, Letters and Numerals for each board shall be as per the

instruction of Engineer - in - charge. A warranty for 10 years for

the Retro reflective sheeting from original manufacturer & a

certified copy of 3 year outdoor exposure test report from third

party test lab for the product offered shall be submitted by

contractor. (A) Class-C Type-11 Retro Reflective sheeting.

[25] Dismantling Kerb Concrete (Dismantling kerb stone by manual 400.00 Rmt 13.13

means and disposal of dismantled material with all lead and lift)

[26] Providing and fixing pre-cast concrete kerb stone of gray cement 2900.00 Rmt 374.92

based concrete block 60cm length,30cm height and 15cm thick of

M250 grade concret as per approved design and including

excavation for fixing in proper line and level,filling the joint with

C:M 1:3 (1cement:3fine sand) etc complete.

[27] Applying oil Painting two coats to Center verge (Kerb) by 2610.00 Sqm 92.20

Yellow/white and Black patta over one coat of primer with

enamel paint, brushing, interior to give an even shade including

cleaning the surface an even shade including cleanicn the surface

of all dirt, dust and other foreign matter. and cost of material

required for paint and all labour worketc complete as per

[28] Median Marker : Providing and Fixing of 3M Median Marker that 34.00 Nos. 271.69

are made of tough, high impact resistant, injection-molded,

thermoplastic body with property of flexibility to provide high

durability. . The dimension of Flexible Median Marker should not

exceed 18.4 cm in height(including shank eight),12.5 Cm in width.

,0.65 cm in thickness and shank depth shall be 3.4 cm The body

structure shall be rounded at all its corners and edges. The ABS

plastic used for molding the Median Marker should survive

impact load of 5kg continuously for 750 times at room

temperature. The logo of the manufacturer shall be embossed on

either side of the body in the injection molding process. The

Median Marker shall have flame like shaped body with,

fluorescent yellow color retro-reflective sheeting of size not less

than 90 Cm square, with fully reflective micro prismatic cube

corners as its retro-reflective elements as per IRC 67 2012 and

ASTM D4956-09 type XI specifications reflectivity values. The

retro-reflective sheeting shall be one or both sides of the Median

Marker and shall be edge protected with no exposed edges

which will prevent edge lifting, vandalism, sheeting damage, etc.

The Median Marker shall be fixed by a combination of epoxy

adhesive and grouting as recommended by manufacturer and

Engineer in charge.

[29] Type - B, "THRIE" : Metal Beam Crash Barrier (Providing and 300.00 Rmt 3996.57

erecting a"Thrie" metal beam crash barrier comprising of 3 mm

thick corrugated sheet metal beam rail, 85 cm above

road/ground level, fixed on ISMC series channel vertical post,

x 75 x 5 mm spaced 2 m centre to centre, 2 m high with 1.15 m

below ground level, all steel parts and fitments to be galvanised

by hot dip process, all fittings to conform to IS:1367 and IS:1364,

metal beam rail to be fixed on the vertical post with a space of

channel section 150 x 75 x 5 mm, 546 mm long complete as per

[30] Planting Flowering Plants and Shrubs in Central Verge including 0.15 Km 57874.01

excavating & maintaning plants with watering/ fertilising with all

material & labour as directed by Engineer incharge.

[31] Providing & Fixing solar power road trafic flasher (24 hours 6.00 No 7878.00

operation) having 30c mm round light source , cluster of high

intencity ultra bright lead visibility greater than 500 mtrs red or

amber availabel or required. Falshing duty cycle 50% operation

for 24 hr. located 3.0 mt. above the ground level. design in line

with IS 7537 -1974 specification of road trafic. siganal solars

model 12V 20WP / 124 ,40W , battary 12 V 60Ah /12 V 110Ah

operating temperature 0 to 50 C , humidity 93% EH (NC)

complete with installation.

[32] Turfing lawns with fine grassing including ploughing, dressing 6280.00 Sqm 110.09

including breaking of clods, removal of rubbish, dressing and

supplying doobs grass roots, Kaanp and including supplying and

spreading of farm yard manure.

[33] Providing & fixing Median Safety Grill with horizontal 50 x 25 x 4 450.00 Rmt 4552.07

mm pipe with 25 x 25 x 2.6 mm vertical MS Pipe of 1 m height

with 25 x 25 x 2.6 mm vertical MS Pipe length of 0.25 m welded

and embedded in foundation base of M150 grade controlled

concrete as gudied by in charge as per drawing/ design including

cost of erection and painting.

[34] Providing and laying 1.00 mm Thick HDPE Geomembrane Sheet 5910.00 Sqm 122.21

(Smooth). For layer separation of Median (RA-11)

[35] Providing and casting in situ Ordinary cement concrete M-150 for 135.00 Cum 3743.35

R.C.C. Raft and cut-off walls including necessary shuttering laying,

vibrating, ramming and curing complete.

[36] Supplying and fixing reinforced concrete heavy duty nonpressure 600.00 Rmt 1968.38

pipes with collars for culverts carrying heavy traffic as per IS 458-

1991 specifications including setting the pipes in C.M. 1:2

watering and laying (to level or slopes) of class NP3 of following

internal daimeters.(iii) 600mm dia.