SPECIAL REPAIRS TO JOINERY OF CERTAIN MARRIED ACCOMMODATION AT ORA AT INA EZHIMALA

Taking down shutter of any description (wooden/Aluminim/steel /PVC) exc. 1 Sqm and n. exc 2 Sqm each complete all as specified and as directed.

Taking down chowkats or frames not exc. 1.5 Sqm Each with Shutters from the frames including making good of disturbed surfaces with CM 1:4 or PCC 1:2:4 type B0 to match with existing surfaces after replacement complete all as specified and as directed.

Taking down chowkats or frames exc. 1.5 Sqm but n.exc 4 Sqm each with shutters without taking off shutters from the frames including making good of disturbed surfaces with CM 1:4 or PCC 1:2:4 type B0 to match with existing surfaces after replacement complete all as directed.

Material & labour solid PVC door frame of sizes 50mm x 47mm made out of 5mm thick wood grain printed PVC sheet reinforced with MS square tube, edges will be painted to match with printed sheet as per specification and drawings complete all as specified and as directed.

Supply & fix Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded wood grain printed colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with 5 mm thick x 15 mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10 mm x 10mm (90 degree) used , and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

Supply & fix 1.25mm thick Pressed steel frames for doors of size 125x60mm with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, all as specified and as directed.

Material & labour for Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed.

Material & labour for Cement concrete 1:3:6 type C0 using 12.5 graded aggregate as filling inside pressed steel frame chowkat all as specified and directed.

Supply & fix Flush 35mm thick flush shutters, solid core covered construction, with paricle board with lipping core and plywood face panels, commercial type on both sides with decorative face veneer on both sides complete all as specified and as directed.

Material & labour Cement concrete (1:2:4) 20mm graded aggregate in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height,copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded or chamfered angles and throating,all as specified and as directed