Supply, Delivery, Testing, Commissioning alongwith Comprehensive Operation and Maintenance Contract For 5 (Five) Years of Nuisance Tanker Vehicles of Different capacities for Municipal Solid Waste Management as per AMC tender specifications, scope of work & terms ‐conditions.

3. Opening of online Technical Bid 12th Aug 2026 ‐ 11.00 Hrs onwards

4. Opening of Price Bid Will be intimated to technically

qualified bidders

5. Bid Validity 120 Days

6. Tender Fee Rs. 12,000/‐

ISSUING OFFICE:

Joint Director (Mechanical)

Central Workshop

Ahmedabad Municipal Corporation

Opp. Sahakari lati bazaar, Jagannathji road.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 1 -

1.0 TENDER NOTICE

1. Tender No: 12/ 2026‐27

2 Last date for Online tender

10th Aug 2026 ‐ up to 18.00 Hrs,

submission and time

3 Date of Tender Opening

(Technical bid) 12th Aug 2026 ‐ 11.00 Hrs onwards

4 Name of the work Supply, Delivery, Testing,Commissioning alongwith

Comprehensive Operation and Maintenance Contract For

(Five) Years of Nuisance Tanker Vehicles of Different capacities

for Municipal Solid Waste Management as per AMC tender

specifications, scope ofwork & terms ‐conditions.

5 Tender fees Rs. 12,000/‐ (Rs. Twelve Thousand Only); to be submitted in the

(Non Refundable) form of D.D. / P.O. favour of Municipal Commissioner,

Amdavad of any Nationalized Bank/Schedule bank/Banks

mentioned in AMC circular and payable at Amdavad; To be

submitted On Date 11th Aug 2026 up to 16.00 Hrs to the Office of

Joint Director (Mechanical), Central Workshop, Amdavad

Municipal Corporation, Opp. Sahakari Lati Bazar, Nr. S.T.Bus

stop, Jaggannathji Road. Jamalpur. Amdavad ‐380022.

6 E.M.D. Rs.28,00,000/‐ (Rs. Twenty Eight Lakh Only);to be submitted in

the form of D.D. / P.O. / BG. in favour of Municipal

Commissioner , Amdavad of any Bank mentioned in AMC

circular and payable at Amdavad; on Date 11th Aug 2026 up to

16.00 Hrs to the Office of Joint Director (Mechanical), Central

Workshop, Amdavad Municipal Corporation, Opp. Sahakari Lati

Bazar, Nr. S.T. Bus stop, Jaggannathji Road. Jamalpur. Amdavad

7 Time Limit For Supply As per tender documents.

8 General Condition As per tender documents.

9 Performance Security As per tender documents.

10 Mode of Sending The By Hand delivery / Registered A.D. or Speed Post / Courier

Tender Fee, EMD etc. addressed to, Office of Joint Director (Mechanical), Central

Relevant Documents Workshop, Ahmedabad Municipal Corporation, Opp. Sahakari

Lati Bazar, Nr. S.T.Bus stop, Jaggannathji Road. Jamalpur.

Ahmedabad ‐380022.

Contractor ’s Sign Joint Director (Mechanical)

With seal Central Workshop.

Ahmedabad Municipal Corporation

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 2 -

Supply, Delivery, Testing, Commissioning alongwith Comprehensive Operation and

Maintenance Contract For 5 (Five) Years of Nuisance Tanker Vehicles of Different

capacities for Municipal Solid Waste Management as per AMC tender specifications,

scope ofwork & terms ‐conditions.

1. The Municipal Commissioner, Ahmedabad Municipal Corporation, invites detailed

bid from interested parties for theSupply, Delivery, Testing, Commissioning alongwith

Comprehensive Operation and Maintenance Contract For 5 (Five) Years of Nuisance

Tanker Vehicles of Different capacities for Municipal Solid Waste Management as per

AMC tender specifications, scope ofwork & terms ‐conditions.

2. Sealed tenders, for the above work are invited from the bidders. The bidders shall be a

single entity / JV / MOU / Consortium / association etc., bidding for the Project.

Detailed PQ criteria are mentioned in tender. All necessary documentary evidence

shall be submitted along with the tender.

GENERAL DETAILS OF WORKS

Name of work: Supply, Delivery, Testing, Commissioning alongwith Comprehensive

Operation and Maintenance Contract For 5 (Five) Years of Nuisance Tanker Vehicles

of Different capacities for Municipal Solid Waste Management as per AMC tender

specifications, scope ofwork & terms ‐conditions.

Tender Fee (Non‐refundable) Rs. 12,000/‐

Earnest Money Deposit (EMD) Rs 28,00,000/‐

Last date of submission of online bid 10th Aug 2026 up to 18.00 Hrs. through E

tendering only,

Address for submission of the Tender fee, EMD and supporting tender documents

Joint Director (Mechanical),

Central Workshop,

Ahmedabad Municipal Corporation,

Opp. Sahakari Lati Bazar, Nr. S.T.Bus stop,

Jaggannathji Road. Jamalpur. Ahmedabad ‐380022

Bid (Technical) Opening Date12th Aug 2026 ‐ 11.00hrs onwards.

DOWNLOAD OF TENDER DOCUMENT

The tender document for these work are available on website

www.ahmedabadcity.gov.in or https://amc.nprocure.com or www.tender.nprocure.com

The bidder shall pay the Tender Fee to the Ahmedabad Municipal Corporation and

shall have to attach the Demand draft / Pay order issued by any Nationalized

Bank/Schedule bank/Banks as mentioned in AMC circular, in favour of Municipal

Commissioner, payable at Ahmedabad shall be attached with the Pre‐qualification

EARNEST MONEY DEPOSIT

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 3 -

The aforesaid BID must be accompanied by the EARNEST MONEY DEPOSIT as

specified in ‘General Details of Work’ section above. The Bid Security shall be in form

of a crossed demand draft / pay orders in favour of “The Municipal Commissioner;

Ahmedabad Municipal Corporation of any Bank as mentioned in AMC circular and

payable at Ahmedabad

SUBMISSION OF TENDER

The completed Tender document shall be submitted at the following address & price

bid through online only.

Tender copy must be accompanied by EMD in the form of Demand draft/ Pay order of

any Bank as mentioned in AMC circular only in favour of Municipal Commissioner,

Ahmedabad. The tenders not submitted in line with the tender clauses and without

Tender fee and EMD in the form specified, will be out rightly rejected. The Technical

bid of only those bidders will be evaluated who have remitted tender fees and

OPENING OF TENDER

The Technical bid of package will be opened as mentioned in ‘General Detail of Work’

Section above, if there is any change, same will be conveyed to tenderers. Intending

bidders or their authorized representative who wish to participate in tender opening

can remain present on the due date and time. Price Bids / Financial bids of only those

bidders will be opened, who are successful in the qualification Criteria and the

Technical Evaluation. The date for price bid opening shall be informed to the successful

bidders at a later date after evaluation of technical bids.

‐ Tender (a complete set of bidding document) fee shall be Rs. 12,000/‐ in the form of

submitted in the form of D.D./P.O. in favour of Municipal Commissioner , Amdavad

of any Nationalized Bank/Schedule bank/Banks mentioned in AMC circular and

payable at Amdavad; which shall be non refundable. The fees shall be paid 11th Aug

2026 up to 16:00 Hrs to the Office of Joint Director (Mechanical), Central Workshop,

‐ The tenders are uploaded on AMC’s website www.ahmedabadcity.gov.in or

https://amc.nprocure.com or www.tender.nprocure.com

‐ Interested Bidders fulfilling the qualifying criteria shall fill online tender on https : //

amc.nprocure.com or www.tender.nprocure.comup to 10th Aug 2026 ‐ up to

Hrs, tender fees as mentioned above shall be paid by the bidder on 11th Aug 2026 ‐ up

to 16.00 Hrs to Office of Joint Director (Mechanical), Central Workshop, AMC.

‐ All bids must be accompanied by Bid Security of the amount specified for the Works

in the above Table payable at Ahmedabad and drawn in favour of AHMEDABAD

MUNICIPAL CORPORATION, Ahmedabad. Bid Security will have to be in any one

of the forms as specified in the tender documents.

‐ All Relevant supporting Documents of Bids must be delivered to Office of Joint

Director (Mechanical), Central Workshop, Ahmedabad Municipal Corporation, Opp.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 4 -

Sahakari Lati Bazar, Nr. S.T.Bus stop, Jaggannathji Road. Jamalpur. Ahmedabad ‐

380022 on 11th Aug 2026 up to 16.00 Hrs.

‐ Information for online participation

Internet site address for e‐Tendering activities will be https://amc.nprocure.com or

www.tender.nprocure.com

Interested bidders can view detailed tender notice and download tender documents

from the above mentioned website.

Bidders who wish to participate in online tender have to register with the website

through the “New User Registration” link provided on the home page. Bidder will

create login id & password on their own in registration process.

Bidders who wish to participate in this tender need to procure Digital Certificate as per

Information Technology Act‐2000 using that they can digitally sign their electronic

bids. Bidders can procure the same from any of the CCA approved certifying agencies,

or they may contact (n) code Solution at below mentioned address and they will assist

them in procuring the same. Bidders who already have a valid Digital Certificate need

not to procure the same. In case bidders need any clarification regarding online

participation, they can contact

M/S (n) code Solution 301, G.N.F.C. Info Tower, Near Grand Bhagwati Hotel,

E‐Mail:URL: https://amc.nprocure.com.

Bidders who wish to participate in e‐Tender need to fill data in predefined forms of

tender fee, EMD, PQ (Technical) or experience details and Price bid only.

Bidder should upload scan copies of reference documents in support of their eligibility

After filling data in predefined forms bidders need to click on final submission link to

submit their encrypted bid. Bidder should also submit Document Fees, EMD, Technical

bid document (those which are not uploaded) & Reference Documents in hard copy to

the department.

GENERAL INSTRUCTIONS

1. The cost of Bid document i.e. tender fees will not be refunded under any circumstances.

2. EMD in the form specified in Bid document only shall be accepted.

3. The offer shall be valid for 120 days from the date of opening of Technical Bid.

4. Tender offers without tender fees, Earnest Money Deposit (EMD) and which do not

fulfil all or any of the condition or submitted incomplete in any respect will be rejected.

5. Conditional tender shall not be accepted. Municipal Commissioner, Ahmedabad

reserves the right to accept or reject such tenders without assigning any reason thereof.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 5 -

6. Tenderers should carefully fill in the rates against the items mentioned in the schedule

and scrutinize them before submitting the tender. Any variation in rates etc. will not

be allowed on any ground such as mistake or misunderstanding etc. after the tender

has been recommended or accepted.

7. The tenderers shall have to necessarily quote the rate for supply, services &/or work

asked for in the tender and in E price bid only.

8. Tenderers shall have his registered office with telephone. Tenderer having experience

in similar works and good track record shall be given preference while considering the

tenders. Tenderers shall furnish the date on which the firm was established, the names

of all the partners constituting the firm with their residential addresses and experience

in similar works. Tenderers having telephones at the residence of the proprietor shall

state the same in the tender.

9. Municipal Commissioner decision will be final and abiding to all for accepting or

rejecting and any interpretation of terms of the tender.

10 In case the tenderers will try to do any type of corrupt procedure like writing letters /

e‐mails /phone calls / Personal visits to the officers of the Municipal Corporation or any

one after prize bid open will be liable for punishment procedure

11. As per the Bombay Stamp Rules Act 1958, Appendix 1, Article 5, the successful bidder

shall enter in to an Agreement with the Corporation on Rs. 300 Stamp Paper / Value as

12. Bidders shall submit necessary registration certificate like GST number registration

copy & any other if required for execution of such work as per government rules along

with tender document.

13. If required tenderer may visit at our Municipal Central Workshop & Zonal SWM Dept.

for general idea of working and requirements of Different types of Nuisance

TankerVehicles with prior appointment.

Municipal Commissioner, Ahmedabad reserves the right to accept or reject any or all

tenders without assigning any reason thereof. This Tender notice shall form a part of

contract document. The tenderers are advised to read carefully the “Instructions to

suppliers” and “Qualification Criteria” contained in the tender documents.

Contractor ’s Sign Joint Director (Mechanical)

With seal Central Workshop.

Ahmedabad Municipal Corporation

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 6 -

INSTRUCTIONS TO SUPPLIERS

1.0 Ahmedabad Municipal Corporation invites Supply, Delivery, Testing, Commissioning

alongwith Comprehensive Operation and Maintenance Contract For 5 (Five) Years of

Nuisance Tanker Vehicles of Different capacities for Municipal Solid Waste

Management as per AMC tender specifications, scope ofwork & terms ‐conditions.

2.0 The requirement of Supply, Delivery, Testing, Commissioning alongwith

Comprehensive Operation and Maintenance Contract For 5 (Five) Years of Nuisance

Tanker Vehicles of Different capacities for Municipal Solid Waste Management as per

AMC tender specifications, scope ofwork & terms –conditionsand their detailed

technical specifications, scope of work etc are set out in Appendix 1. Interested and

qualified parties, based on qualification criteria set out in Appendix 2, (Online)are

requested to submit information about bidder and a financial Quotation / price bid in

a manner prescribed in Appendix 3 & 4(Online). Tenderer has to submit various

other details as per format / details asked for in the Annexure 1 to

3.0 Each tenderer shall submit only one (1) Bid for each of the item, in response to this

Tender Document (TD). Any tenderer who submits more than one Bid for the item will

be disqualified.

4.0 At any time prior 72 hours to the last date and time of submission of Bids AMC may,

for any reason, whether at its own initiative or in response to clarifications requested

by any supplier, modify the TD by the issuance of Addenda. All interested tenderer

shall have to check the AMC / n procure website. The Bidder shall not transfer the TD

to another interested party. Any reply/changes (if required) , will also be declared on

above website only.

6.0 Perpetrations of tender document: Tenderer shall carefully examine the tender

documents and fully inform themselves as to all the conditions and matters, which

may in any way effect the work or the cost Should a Tenderer find discrepancies, error

or omission from the specifications or other documents or should he be in doubt as to

their meaning, he should address query to the concerned authority. Any resulting

interpretation of the tender documents (if required) will be issued to all Tenderers as

an addenda corrigendum. Verbal clarification and/or information given by the

Tenderer shall not be binding on the Corporation.

7.0 Modification of Documents : Modification of specifications and extension of the closing

date of the tender, will be published on website only. These shall be signed by tenderer

and shall form a part of tender. If required will be made by an addendum /

8.0 Addenda: Addenda form part of the contract documents and full consideration shall

be given to all addenda in the preparation, evaluation etc. of tender. Tenderer shall

verify the number of addenda issued, if, any and acknowledge the receipt of all

Addenda in the Tender. Failure to do so may cause the Tender to be rejected.

9.0 The Bid shall remain valid for a period not less than 120 days from the date of opening

of tender i.e. technical bid (bid validity period). AMC reserves the right to reject any

Bid, which does not meet this requirement. In exceptional circumstances, prior to

expiry of the original Application Validity Period, AMC may request Applicants to

extend the Application Validity Period for a specified additional period. Applicants

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 7 -

not extending the Application Validity Period when so requested would automatically

be disqualified.

10.0 Earnest Money Deposit (EMD)

11.0 Each Bid shall be accompanied by EMD as mentioned in tender.

12.0 The EMD shall be in the form of a crossed demand draft / Pay Order / Bank Guarantee

in favour of the banks as per AMC circular, Municipal Commissioner, Ahmedabad,

payable at Ahmedabad.

13.0 The EMD shall be forfeited in the following cases:

(a) If the Tenderer withdraws itʹs Bid during the interval between the Bid Due Date and

expiration of the Bid Validity Period.

(b) If the successful Tenderer fails to provide the Performance Security deposit within the

stipulated time or any extension thereof provided by AMC;

14.0 Performance Security Deposit :

15.0 The successful Supplier (for awarded tender part) would be required to submit Supply

Performance Security amounting to 5% of the Supply item Ordervalue for

procurement part in the form a crossed demand draft/ Pay Order / BG in favour of

The Municipal Commissioner, Ahmedabad on any Bank as mentioned in AMC

circular, payable at Ahmedabad which will be returned back on successful completion

of one year Vehicles warranty period, where as separate O & M contract Performance

Security deposit which shall be submitted (as mentioned in performance security

conditions in detail) before start of actual O & M work ,which will be returned back on

successful completion of O & M Contract period.

16.0 Irrevocable Bank Guarantee issued by a Bankas mentioned in AMC circularlocated in

Ahmedabad, India (as per AMC rules) shall also be acceptable.

17.0 Formats and Signing of Bid

17.1 The Tenderer would provide all the information as per this TD. AMC would evaluate

only those Bids that are received in the required format and are complete in all respects.

Each Bid shall comprise the following:

(a) Details of the Tenderer in the format set out in Appendix 3‐ Online

(b) Qualification Criteria / Technical bid in the format set out in Appendix 2‐ Online

(c) Financial Quotation/ price bid forSupply, Delivery, Testing, Commissioning alongwith

Comprehensive Operation and Maintenance Contract For 5 (Five) Years of Nuisance

Tanker Vehicles of Different capacities for Municipal Solid Waste Management as per

AMC tender specifications, scope ofwork & terms –conditionsin the format set out in

Appendix 4 in online format only.

(d) Tenderer has to submit various other details and formats duly self attested and signed

as per Annexure 1 to

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 8 -

(f) The Bidder shall duly sign all the sheets of the Tender Document submitted in support

of their online tender.

(h) All bidders are requested to upload technical bid documents, however if they found

any difficulty in uploading, they can submit the same in physical with tender technical

bid (EMD, Tender fee etc) supporting documents.

18.0 The bidder shall seal the Tender fee, EMD and relevant Tender Document submitted

in support of their online tender in envelopes, which shall be clearly marked as Supply,

Delivery, Testing, Commissioning alongwith Comprehensive Operation and

Maintenance Contract For 5 (Five) Years of Nuisance Tanker Vehicles of Different

capacities for Municipal Solid Waste Management as per AMC tender specifications,

scope ofwork & terms –conditionsalong with tender number, due date of tender etc.

19.0 The Tender Document submitted in support of their online tender shall be initialled by

an authorized signatory of the Bidder or an Individual, as applicable.

20.0 Sealing and Marking of Bid for submission of Physical Tender supporting

21.0 The envelope for EMD‐Tender fee and relevant supporting documents must be

superscribed with the following information:

(a) Name and Address of Tenderer;

Tender due date and time;

22.0 If the envelope is not sealed and marked as instructed above, AMC assumes no

responsibility for the misplacement or premature opening of the contents of the Bid

submitted and such Bid, may, at the sole discretion of AMC, be rejected.

Tender shall be submitted through E ‐ tendering only. (On line price Bid is

23.0 AMC reserves the right not to respond to any/all queries raised or clarifications sought

if, in their opinion and at their sole discretion, they consider that it would be

inappropriate to do so or do not find any merit in it. The response to the queries shall

be uploaded only (if found appropriate and required) on www. amc.nprocure.com &

www.tender.nprocure.com/AMC website.

24.0 Bid Due Date : As mentioned in tender.

25.0 Bids should be submitted online before 18.00 hours IST on 10th Aug 2026, in the

manner and form as detailed in this PD. Bid submitted by either Hard copy (not as per

format in TD), facsimile transmission or telex or email or in person will not be accepted

and such tender/s will be rejected.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 9 -

26.0 AMC may, in exceptional circumstances, and at its sole discretion, extend the above

Bid Due Date by issuing an Addendum / corrigendum.

27.0 Opening of Bids and Clarifications

All information must be typed or hand written legibly in English language. All pages

of the pre‐qualification document must be initialled by the applicant. All corrections,

erasures or overwriting, therein, must be initialled by Applicant.

28.0 Technical bid will be opened on 12th Aug 2026 ‐ 11.00 hrs onwards. AMC would open

the Bids possibly on Bid Opening Date as mentioned above in the ‘General Description

of Work’ for the purpose of evaluation, if there is any change , same will be intimated

29.0 AMC reserves the right to reject any or all Bids not submitted on time and which does

not contain the information/documents as set out in tender .

30.0 To facilitate evaluation of Bids, AMC may, at its sole discretion, seek clarifications in

writing from any Tenderer regarding its Bid, and can take information from past

purchasers / customers etc as may be required.

31.0 Evaluation

The details given by the applicants in the pre qualification documents will be evaluated

as per qualifying criteria, given in tender. Ahmedabad Municipal Corporation reserves

the right to restrict the list of pre‐qualified applicant to any number deemed suitable

by it. Ahmedabad Municipal Corporation’s decision for interpretation of any term of

pre qualification criteria, pre‐ qualifying the applicants etc. shall be final and binding

32.0 As part of the evaluation, the Bids shall be checked for responsiveness with the

requirements of the TD and only those Bids, which are found to be responsive, would

be further evaluated in accordance with the criteria, set out in this TD.

33.0 The Bid would be considered to be responsive if it meets the following conditions:

(a) It is received /deemed to be received by the Bid Due Date including any extension

(b) It is signed, sealed and marked as stipulated in tender.

(c) It contains all the information and documents as requested in the TD.

(d) It contains information in formats specified in this TD.

(e) It mentions the validity period as set out intender.

(f) It provides information in reasonable detail. (“Reasonable Detail” means that, but for

minor deviations, the information can be reviewed and evaluated by AMC without

communication with the Supplier). AMC reserves the right to determine whether the

information has been provided in reasonable detail.

(g) There are no inconsistencies between the Bid and the supporting documents. A Bid

that is substantially responsive is one that conforms to the preceding requirements

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 10 -

without material deviation or reservation. A material deviation or reservation is one

(i.) which affects in any substantial way, the scope, quality, or performance of the

project, or (ii.) which would affect unfairly the competitive position of other Tenderer/s

presenting substantially responsive Bids.

34.0 AMC reserves the right to reject any Bid, if:

(a) If the tender is incomplete; or

(b) At any time, a material misrepresentation is made or discovered; or

(c) The Supplier does not respond promptly and diligently to requests for supplemental

information required for the evaluation of the Bid.

35.0 In case the Bid is found to be responsive, the Bid would be evaluated in accordance

with the Qualification Criteria as set out in Appendix

36.0 In case the Bid is found to be inadequate, AMC may request the Tenderer for

supplementary informations to the Bid submitted. As part of the evaluation of the Bid,

AMC may also request the Supplier to submit clarifications.

37.0 The Financial Quotations/ Bid of only those Tenderer/s, who meet the Qualification

Criteria, would be opened.

38.0 The Tenderer offering the lowest quotation for the Supply, Delivery, Testing,

Commissioning alongwith Comprehensive Operation and Maintenance Contract For

5 (Five) Years of Nuisance Tanker Vehicles of Different capacities for Municipal Solid

Waste Management as per AMC tender specifications, scope ofwork & terms –

conditionsas per formula given in tenderwould be declared as the Preferred Tenderer

39.0 Tenderer has to submit the technical presentation in support of their technical bid (if

asked by AMC) with all the credentials and salient features of their Vehicles& proposal

to enable the more technical evaluation of the available proposal, if required AMC can

ask the tenderer to show the live working of the Vehicles and based on the

performance, AMC can take the decision for technical evaluation. This will be binding

to all the bidder.

40.0 Even though agency is qualifying all the above criteria but found to be poor in

performance, in the opinion of class‐I officer of AMC and above cadre, his price bid

will not be opened. It is the discretion of Municipal Commissioner or the Tender

Scrutiny Committee to qualify / disqualify the agency or to open / not to open the price

41.0 AMC may either choose to accept the Quotation of the Preferred Tenderer or invite

him for negotiations.

42.0 In case there are two or more Tenderer quoting the same price, AMC may in such case

call all such Tenderer for negotiations and select the Preferred Tenderer on the outcome

of the negotiations. The selection in such cases shall be at the sole discretion of AMC.

43.0 In the event of acceptance of the Preferred Tenderer with or without negotiations,

AMC shall declare the Preferred Tenderer as the Successful Tenderer. AMC will notify

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 11 -

the Successful Tenderer through a Letter of Award (LoA) / order that its Bid has been

44.0 This work will be considered as rate contract for one Year for SITC cum O & M of

Different types of Nuisance TankerVehicles as per tender requirements and technical

specifications of AMC as per tender conditions; as per PD. Rate sanctioned will be fixed

for entire one year RC (Rate Contract) period from the date of work order. During this

RC period if AMC needs more Sweeping Vehicle units with O & M contract (for all or

any part A to C); successful bidder has to carry out both SITC & O & M work at the

same approved rates & terms. No price escalation will be given during RC period. Only

change in taxes, duties, govt. levies will be accepted by AMC & consider for payment.

RC period may be extended for further period of One year by mutual confirmation.

Decision of The Municipal Commissioner Shri, AMC will be final & binding to all.

AMC can order for further / extra quantity, if required during entire RC period.

45.0 Notwithstanding anything contained in this TD, Municipal Commissioner, AMC

reserves the right to accept or reject any quotation, or toannul the bidding process or

reject all quotations, at any time without any liability or any obligation for such

rejection or annulment, without assigning any reasons thereof.

46.0 Notwithstanding above, the MC‐ AMC, at his discretion, may also split the contract, if

require for timely execution of the work among two of more qualified bidders. MC‐

AMC ʹs decision in this regard shall be final. MC‐ AMC also reserves right to award

the Contract to any of the eligible and qualified suitable Bidder. Splitting of work will

be carried out based manufacturing capacity, past work experience of the bidder, time

frame for execution of work etc and this shall be binding to all bidders. Parallel

contract, if required, can also be awarded on above basis and will be binding to all.

47.0 However, if the AMC decide to put an end to the business relations on breach of any

conditions of the contract no such notice shall be necessary and on event of AMC

decided to put an end to the business relations on breach of any conditions of the

contract no such notice shall be necessary and on event of AMC deciding to terminate

the business, and the R.C. shall stand terminated with immediate effect.

The R.C. can also be terminated by the MC ‐ AMC in the following circumstances:

1) If the firm is debarred or disqualified or ceases to exist or convicted of any offence.

2) If the quality of the item to be supplied is found not up to the ISI standard /AMC

Specifications (as applicable) and found to be not of standard quality.

3) If supply position of the firm is not satisfactory.

48.0 Whenever under this contract any sum of money is recoverable from the RC Holder

and payable to the MC ‐ AMC, Ahmedabad, or an officer empowered by him shall be

entitled to recover such sum by appropriating in part of whole the Security Deposit

paid by the Contractor, if a security being insufficient or if no security has been taken

from contractor, then the balance of the total sum recoverable as the case may be

deducted from the sum due to the contractor under this or any other contract.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 12 -

49.0 If any dispute arises about the contract or any terms of contract, Municipal

Commissioner, AMC shall be the sole arbitration and his decision would be final and

binding to all the parties.

50.0 Vehicles shall be inspected / verified by Joint Director (Mechanical) & / or authorized

representative/s of AMC with the specification of AMC (if required) & on approval

same shall be put in working.

51.0 The price escalation or variation clause will not be accepted. Tenderer has to quote the

total price, net including of all taxes & duties etc. and for evaluation and finalization

purpose, the total price will be taken in to consideration. Transportation, Packing,

Forwarding, Insurance charges are included in the indicated price. However any

change in the GST, Govt. statutory levies and taxes etc. will be considered for payment

at actual (for supply and O & M work both) for which contractor will have to submit

necessary documentary proofs as required by department. No other change will be

accepted. For O & M work fuel rate change will be considered as per the condition and

formula given in the tender O & M work part.

52.0 The technical specification and scope of work for Supply, Delivery, Testing,

Commissioning alongwith Comprehensive Operation and Maintenance Contract For

5 (Five) Years of Nuisance Tanker Vehicles of Different capacities for Municipal Solid

Waste Management as per AMC tender specifications, scope ofwork & terms ‐

conditions given in Appendix 1, however bidder are advice to personally visit the

AMC, Central Workshop& zonal SWM Dept. for better understanding of requirement

and working of Vehicles.

53.0 EXTENSION FOR DELAY.

If the supply is delayed by:

a) Force Majeure.

b) Abnormally bad weather, or

c) Serious loss or damage by fire

d) Civil commotion or strike or lock out of their principal workshop.

Any other cause which is beyond the contractorʹs control then upon the happening of

any such event causing delay, the contractor shall immediately inform in writing to the

Dy.M.C. (Central Workshop / SWM) but at the same time his best endeavours to make

good the delay. The Dy.M.C. (Central Workshop / SWM) in such event can take the

final decision regarding the late delivery penalty for such cause.

54.0 The contractor must follow all the rules and regulations pertaining to the work, labour

etc. Contractor shall have to produce Employee labor license and P. F. license and must

follow rules and regulations as amended in law. The expense of having the license shall

be borne by contractor. Contractor has to maintain PF, ESIC, Professional tax account

of their staff. AMC shall not be responsible for the same.

55.0 PAYMENTS DUE FROM CONTRACTOR.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 13 -

The Municipal Commissioner shall be entitled to recover costs, damages, or expenses

for which under the contract, the contractor is liable to the Ahmedabad Municipal

Corporation from any money due or becoming due to the contractor under the contract

or Municipal Commissioner will have the liberty to recover the amount from the

56.0 Payment Terms: ‐

As mentioned in Appendix‐1

57.0 PQ criteria are mentioned in Appendix‐2.

58.0 The MC ‐ AMC shall, in addition to his powers under other clauses to terminate the

contract, have powers to terminate his liability there under of the time by giving one

month’s (or such shorter period as may be mutually agreed) notice in writing to R.C.

holder of his desire to do so and upon expiry of the notice, the contract shall be

terminated without prejudice to the right accrued to the date of the termination.

59.0 Successful bidder has to use all virgin material for fabrication/ manufacturing of the

ordered item/ material and has to submit all necessary proofs like Invoice copies of

material purchased, test reports etc as per AMCrequirements.

60.0 Contractor shall make payment to their employee/ workers through bank system only.

61.0 AMC based on prevailing practice of waste management in the city, can increase /

decrease the work quantum even after award of work & from the running contract at

any time. No compensation for reduction in work will be given in any way. This shall

be binding to the contractor/s.

62.0 No Compensation for Alteration in or Restriction of Work If at any time after the

commencement of the work, the Ahmedabad Municipal Corporation shall for any

reason whatsoever not require the whole or part of work/supply thereof as specified

in the tender to be carried out, the AMC shall give notice in writing of the fact to the

contractor, who shall have no claim to any payment or compensation whatsoever on

account of any profit or advantage which he might have derived from the execution of

the work/supply in full, but which he did not derive in consequence of the full amount

of the work/supply not having been by reason of any alterations having been made in

the original specifications, drawings, designs and instruction which shall not involve

any curtailment of the works as originally contemplated.

63.0 The Municipal Commissioner, Ahmedabad Municipal Corporation reserves the right

to reject all or any of the tender including the lowest tender or part of the tender which

in the judgment of the Municipal Commissioner, Ahmedabad Municipal Corporation

does not appear to be in the best interest of Ahmedabad Municipal Corporation and

the contractor shall have no cause of action or claim against the Ahmedabad Municipal

Corporation, its officers, employees, successors, or assignees for rejection of his tender

64.0 The activity is under essential service, contractor is not allowed to stop this work at

any point of time. If the contractor fails to start the work on time after issue of work

order, then EMD of the contractor shall be forfeited and if the agency is found to be

poor in performance for carrying out awarded work or Notwithstanding, if contractor

stop / leave the work by his own discretion then performance Security Deposit of the

contractor shall be forfeited and additional expenditure for execution of remaining

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 14 -

work shall be recovered through, if be needed, legal proceeding and Agency shall be

debarred / blacklisted subject to approval of competent authority.

65.0 Tenderer has to submit all the relevant information likes;

 Company & Model details for Vehicles quoted

 Availability of local service point.

 Warranty conditions

 Detailed client list to which such type of Vehicles have been supplied by them.

 Details of Technical experience of tenderer (Supply and O & M work)

 Performance certificates as per tender requirements.

66.0 Special Conditions

a) The bidder has to make the invoices in the name of AMC.

b) Bidder has to instruct the dealers/ O & M work contractor to render after sale

service for the supplies made, and copy of the same to be enclosed with bid if

service will be provided through dealer network. Even in such circumstances

all liabilities will rest on supplier only.

c) On failure of L1 to show the technical presentation &/or live‐ actual working

performance (if asked by AMC) of the Vehicles for technical approval of bid

his tender will be rejected. AMC can ask the Lowest &/or other qualified

bidder/s to submit the Sample unit for checking / verifying the same with

tender specifications and actual requirement‐ working, before finalizing the

bid. On failure of L1 for approval of sample / execution of order the L2 shall

be invited for negotiation and further formalities (as above) if required.

d) The tenderer shall be fully responsible for taking delivery of Vehicles from the

manufacturer/dealer of Vehicles and in no way any kind of relaxation will be

given if there is any problem with the Vehicles received. The tenderer should

see that the design of equipment should be such that which comply all

prevailing RTO/any other Govt authority norms (if any) in Ahmedabad city

for such type of Vehicles

e) The tenderer must quote for complete job (Supply and O & M). The tenderer

that does not include the complete job as specified in schedule of tender

(specification, scope of work etc.) will be rejected. The successful bidder shall

be responsible for taking timely delivery of Vehicles from Vehicles supplier if

quoted by service provider. The successful bidder shall be responsible for

any fault, shortfall in the Vehicles proposed in the tender etc or any other

requirement which is mandatory for the completion of successful

equipment manufacturing.

f) Separate financial evaluation will be carried out for each part of tender i.e.

Separate Lowest bidder will be evaluated based on price quoted in that

part(i.e. separate for different types of Nuisance TankerVehicles as per price

format A to C ).Interested bidder/s can take part in all & / or any part of the

tender. However based on requirement, AMC will decide final quantity of

Nuisance TankerVehicles. Any variation / change in quantity (for different

types of Nuisance TankerVehicles ) will be binding to all bidders. However

tender fee & EMD will remain same for entire tender.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 15 -

g) It will be the responsibility of the tenderer to collect the Vehicles/chassis from

the regional sales office/ depot / port / doc etc of the manufacturer & / or their

authorized dealer and transport the same to delivery location. Any charges

applicable for the same shall be included in the tender offer. Chassis shall be

billed on name of Municipal Commissioner,AMC by chassis manufacturer for

which successful tender has to complete necessary procedure.

h) Tenderer has to design the Vehicles as per the requirements of AMC; keeping

in mind the RTO / other Govt. agencies norms applicable in City of

Ahmedabad for such type of Vehicles and according to the same they have to

supply the fully built unit to AMC, Central workshop. Failure at any part will

be contractorʹs responsibility and will have to bear the cost.

i) The successful tenderer will be fully responsible for the safety and security of

the Vehicles when in their possession during the delivery, testing,

commissioning stage and even during the entire O & M contract period.

j) Tenderer has to quote for Model having latest emission norms(minimum)

applicable in Ahmedabad city, Gujarat India at the time of delivery. Only those

Model will be consider for evaluation for which any Indian / International (as

per prevailing norms in India for such Vehicles) approval certificates attached

with tender. Decision for selection of model will be taken by AMC as per the

requirements and will be final and binding to all bidders.

k) Necessary design and final approval from RTO / other govt. agencies (as

required) as per latest norms and rules is tenderʹs responsibility. If tenderer is

failed to comply the rules of RTO /other govt. agencies (if any) and submit the

required documents for their supplied Vehicles, same will be rejected by AMC.

l) The contractor shall ensure that the supervisors and cleaners are all mentally

stable, and are able to communicate properly. They should not pose any

hazard to the general public. Contractor shall give preference to local Valmiki

Samaj workers for the work. Contractor must have to pay the salary through

banks to the workers, drivers and other workforce regularly and contractor

shall be fully responsible for that.

m) This is subject to the jurisdiction of the competent court of Ahmedabad only.

In case of any claim, dispute of difference arising in respect of a contract, the

cause action thereof shall be deemed to have arisen in Ahmedabad and all legal

proceedings in respect or any such claim, dispute or difference shall be

instituted in a competent court in jurisdiction of Ahmedabad city only.

Contractor ’s Sign Joint Director (Mechanical)

With seal Central Workshop.

Ahmedabad Municipal Corporation

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 16 -

Ahmedabad Municipal Corporation

Supply, Delivery, Testing, Commissioning alongwith Comprehensive Operation and

Maintenance Contract For 5 (Five) Years of Nuisance Tanker Vehicles of Different capacities

for Municipal Solid Waste Management as per AMC tender specifications, scope ofwork &

terms ‐conditions.

The number of Supply, Delivery, Testing, Commissioning alongwith Comprehensive

Operation and Maintenance Contract For 5 (Five) Years of Nuisance Tanker Vehicles of

Different capacities for Municipal Solid Waste Management as per AMC tender specifications,

scope of work & terms –conditions to be procured are Total 14nos.putting all together

However, actual number which will be ordered for different part will be at the sole discretion

Tender Validity period

The Validity period is 120 days from the date of technical bid opening.

Tenderer has to carry out Design of Vehicleson vehicle / chassis as per the latest applicable

norms of RTO at the time of delivery of completed vehicles and other govt. agencies (as

required) in Ahmedabad and Gujarat, keeping in mind the requirements‐ specifications of

AMC; otherwise it will not be accepted.

Procurement period (i.e. Delivery Period)

The total procurement period is 90(or as per delivery schedule mentioned in supply order for

different tender part) days. However, delivery period will commence from the date of invoice

of chassis to the unit (rear Nuisance Tanker unit) manufacturer by chassis supplier. However

unit manufacturer must have to issue complete procurement order (as per the requirement of

chassis supplier) to the chassis supplier immediately within 7 days from the date of receipt of

AMC order. Other wise late delivery will be considered for such delay period.

Delivery Schedule

As per requirement, AMC will give delivery schedule (if delivery required in staggered

manner/delay) to the successful bidder. The price quoted as per Appendix 4, will be valid for

the entire rate contract period, which will be binding to the Tenderer.

Delivery location: Ahmedabad, Gujarat at site specified by AMC

For Supply part:

(1) For Chassis: 100% of the Chassis payment as per the invoice (as per the approved rate

in the tender) of Chassis manufacturer / debit note of dealer will be issued to successful

tenderer on receipt of chassis at fabricatorʹs Factory premise against debit note / invoice

and all supporting documents submission by contractor. (chassis shall be directly

procured on name of Municipal Commissioner, AMC)Tenderer has to submit

necessary documents as required by department. Chassis Invoice shall be on name of

Municipal Commissioner, AMC, Ahmedabad only.

(2) For supply of equipment (for rearNuisance TankerVehicles unit); preferably after

satisfactory Delivery at our central workshop; AMC, preferably within 30 days.

For Operation and Maintenance contract :

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 17 -

Every monthly against satisfactory work, as per certificates of various authorities as

mentioned in the tender.

The Security Deposit for supply part will be paid back only after the completion of supply

warranty period and O & M contract part after successful completion of contract period

without any interest.

Transit Insurance

The Supplier is responsible for transit and all other insurances (as / if required)till the tools/

Vehicles and equipment are delivered at the location mentioned in the Procurement Order.

The Supplier warrants that the Goods supplied under this Contract are new, unused, of the

most recent or current models and those they incorporate all recent improvements in design

and materials unless provided otherwise in the Contract. The Supplier further warrants that all

Goods supplied under this Contract shall have no defect arising from design, materials or

workmanship (except when the design and/or material is required by the Purchaserʹs

Specifications) of from any act or omission of the Supplier, that may develop under normal use

of the supplied Goods in the conditions prevailing in the country of final destination.

Thissupply warranty shall remain valid for 12 months after the Goods or any portion thereof

as the case may be, have been delivered to and accepted at the final destination indicated in the

Contract or as specifically mentioned in the work order.

The Purchaser shall promptly notify the Supplier in writing of any claims arising under this

warranty. Upon receipt of such notice, the Supplier shall, within 15 days and with all

reasonable speed, repair or replace the defective Goods or parts thereof, without cost to the

If the Supplier, having been notified, fails to remedy the defect(s) within the period specified

above, the Purchaser may proceed to take such remedial action as may be necessary, at the

Supplierʹs risk and expense and without prejudice to any other rights which the Purchaser may

have against the Supplier under the Contract.

Items supplied by contractor must have minimum warranty of 12 months from the date of

delivery against any manufacturing defects etc.

Tender Financial evaluation formula:‐

Note :‐ The decision of lowest rate will be on the basis of rates quoted for supply of Vehicles

and O & M contract of different shifts (for in warranty & out of warranty period)and

will be calculated as under (separate evaluation will be carried out for Nuisance

Tanker of different capacities based on rates quoted in tender for Part A to C)

 Total Cost for A (For Supply Part) = Net rate of each Vehicles x Nos. of Vehicles mentioned

in respective tender part.

 Total cost For O & M Part =

Rate of Tenderer for B :‐ (for First Year ‐ In Warranty Period)

Rate of tenderer For B = (0.6 x a) + (0.2 x b) + (0.2 x c)

Where; (Based on rate quoted For B)

a= Rate per 8 Hrs. working shift of O & M work per Vehicle per day Rs.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 18 -

b= Rate per 12 Hrs. working shift of O & M work per Vehicle per day Rs.

c= Rate per 16 Hrs. working shift of O & M work per Vehicle per day Rs.

Rate of Tenderer for C :‐ (for Rest Years ‐ Out of Warranty Period)

Rate of tenderer For C = (0.6 x a) + (0.2 x b) + (0.2 x c)

Where; (Based on rate quoted For C)

a= Rate per 8 Hrs. working shift of O & M work per Vehicle per day Rs.

b= Rate per 12 Hrs. working shift of O & M work per Vehicle per day Rs.

c= Rate per 16 Hrs. working shift of O & M work per Vehicle per day Rs

E = Final Rate of Tenderer = Rate of tenderer for B x 0.20 + Rate of Tenderer for C x

Total Cost of O & M ʺFʺ = Final rate of tenderer ʹEʹ x 365 days x Nos. of Vehicles mentioned

in respective tender partx 5 years

Total Cost G = Total cost for Vehicles supply A + total cost for O & M work ʺFʺ

The tenderer whose ʺ Total cost ʹGʹ ʺ Found lowest based on above formula will be treated as

first Lowestbidder for that part.

PERFORMANCE SECUTRITY GUARANTEE

for Supply of Vehicles:

As a contract performance security, the contractor shall furnish performance guarantee for

supply part in the form of Bank Guarantee (as per AMC rules) or by Demand draft/ pay order

within 15 days from the date of order for the amount at least 5 % of the ordered amount from

any Nationalized Bank/Schedule bank/Banks as mentioned in AMC circular and made payable

to the ʺMunicipal Commissioner, Ahmedabad Municipal Corporationʺ payable at Ahmedabad.

If any delay, necessary action will be taken by AMC and will be binding to successful tenderer.

The performance guarantee shall be returned to the contractor without any interest on the

successful completion of the warranty period, when the contract ceases to be under any

Vehicles supplied by contractor must have warranty of 12 months from the date of delivery

against any manufacturing defects etc.

For O & M contract work:

For Operation and maintenance contract work, Contractor has to submit performance security

deposit which shall be 5% of the one year O & M contract work amount based on daily 8 hrs

working shift approved rate as a contract performance security. This guarantee (BG) shall be

renewed timely (every yearly) till expiry of contract. The contractor shall furnish performance

guarantee in the form of Bank Guarantee (as per AMC rules) or by Demand draft/ pay order

within 15 days from the date of order from any Bank as mentioned in AMC circular and made

payable to the ʺMunicipal Commissioner, Ahmedabad Municipal Corporationʺ. Payable at

Ahmedabad which shall be released after the successful completion of the contract period,

subject to no due certificate from the Corporation, if any amount is due from the contractor

even after adjusting from monthly bills, the same will be recovered from this amount. If any

delay, necessary action will be taken by AMC and will be binding to successful tenderer.

‐ Forfeiture of Security money: ‐ Security amount in full or part may be forfeited in the

following cases:‐

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 19 -

When any terms and conditions of the contract are breached

(i) When tenderer fails to make complete supply, installation, commissioning and testing of

the equipments/ Vehicles and carry out o & m work satisfactorily as per scope of work and

The decision of the Municipal Commissioner, AMC in this regard shall be final.

Notwithstanding the provisions of tender, the Supplier shall not be liable for forfeiture of its

performance security, liquidated damages or termination for default, if and to the extent that,

its delay in performance or other failure to perform its obligations under the Contract is the

result of an event of Force Majeure.

For purposes of this Clause, ʺForce Majeureʺ means an event beyond the control of the Supplier

and not involving the Supplierʹs fault or negligence and not foreseeable. Such events may

include, but are not limited to, acts of the Purchaser either in its sovereign or contractual

capacity, wars or revolutions, fires, floods, epidemics, quarantine restrictions and freight

If a Force Majeure situation arises, the Supplier shall promptly notify the Purchaser in writing

of such conditions and the cause thereof. Unless otherwise directed by the Purchaser in writing,

the Supplier shall continue to perform its obligations under the Contract as far as is reasonably

practical, and shall seek all reasonable alternative means for performance not prevented by the

Force Majeure event.

TAXES AND DUTIES : ‐

Prices quoted must be inclusive of all & all taxes.

GST (Goods & Service Tax) has come in existence from 1st July, 2017. Contractor/ successful

bidder is bound to pay any amount of GST prescribed by the Govt. Of India as per the terms of

contract agreed upon during the course of execution of this contract.

During the course of execution of contract, if there is any change in rate of GST (Goods and

Service tax) by the government, the same shall be reimbursed/recovered separately by AMC,

subject to the submission of original receipt /proof for the amount actually remitted by the

successful Tenderer/ Contractor to the competent authority along with the certificate from

Chartered Accountant of contractor/successful bidder certifying that the amount of GST paid

to the government and the same shall be intimated/ submitted/ claimed within 30 (thirty) days

from the date of payment.

Remittance of GST within stipulated period shall be the sole responsibility of the successful

bidder/contractor, failing which, AMC may recover the amount due, from any payable dues

with AMC and decision of Municipal Commissioner shall be final and binding on the

contractor/successful bidder in this regards.

Further, the non‐payment of GST to the government may lead to the termination of contract

and forfeiture of Security deposit/performance guarantee amount.

2% TDS will also be deducted as GST TDS, as per prevailing rules/norms.

If imposition of any new taxes/ duties/levies/cess or any other incidentals etc or any change in

the existing taxes/ duties/levies/cess or any other incidentals etc (Including GST) and imposed

during the course of the contract, the same shall be considered at actuals for payment purpose.

Necessary documents shall be submitted by tenderer as required by AMC.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 20 -

The successful bidder (for allotted part) will make all arrangement at their cost for inspection

of theNuisance Tanker Vehicles mentioned in tender at Part A to C. T h i s wi ll b e c ar rie d

o u t b y AMC &/or Third Party (if required) along with AMC, before delivery at factory/depot

site (If required). Inspection and commissioning of the Different types of Nuisance Tanker

Vehicles mentioned in tender at Part A to Cwill also be carried out at Ahmedabad at site

specified by AMC (if required). If any discrepancy is found in the material supplied and

technical specifications approved, the same lot shall be rejected and bidder will collect rejected

material within seven days. No claim for the rejected material shall be entertained.

Liquidated damages for delay

Supplier in accordance with the schedule specified in the tender shall make delivery of the

An unexcused delay by the supplier in the supply of its delivery obligations, supplier will be

hold liable and AMC can take actions to forfeit of his performance security, imposition of

liquidated damages and/or termination of the contract by default.

If the supplier fails to deliver any or all of the equipments within the said period, AMC shall

deduct from the contract price as liquidated damages (Late delivery penalty) will be calculated

on the basis of delayed days for delayed quantum (delayed work amount) of work and rate of

calculation will be 2% per month of delivery price will be recovered from the supplier without

any reference to the supplier. The amount of Liquidated damages will be however subject to

the maximum of 10% of the total contract sum.

However, Delay in excess of one hundred (100) days after completion of delivery period may

be cause for termination of contract and forfeiture of all security for performance. Decision of

Municipal Commissioner, AMC in this regard will be final and binding to successful tender/

Contractor ’s Sign Joint Director (Mechanical)

With seal Central Workshop.

Ahmedabad Municipal Corporation.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 21 -

AHMEDABAD MUNICIPAL CORPORATION

CENTRAL WORKSHOP

Tender No : 12 / 26‐27 / Part A

Nuisance Tanker (Appx. 8000 Ltr Capacity)

TECHNICAL SPECIFICATIONS OF NUISANCE TANKER (APPX.

LTR. CAPACITY) VEHICLE

Name of Work: Supply and Testing‐ Commissioning of Nuisance Tanker of Appx. 8000 Liter

capacity with new cab‐chassis as per AMC Tender Specifications and requirements ‐ 04 Nos.as

per tender scope of work & terms conditions.

The equipment shall be designed, fabricated, mounted and integrated to the chassis having

minimum BS‐ 6 OBD 2 norms & matching all requirements of various govt. agencies / RTO

rules/ norms & the following technical specification as the minimum requirement

Functional Requirements: Cab‐chassis is required to build up the NuisanceTanker having

Appx. 8000 Liter capacity with required engine ‐ pump set as mentioned in the specifications

for various Municipal utility related works including washing of community toilets, pay & use

toilets, public urinals, spraying of water for general purpose as well as specific purpose to

reduce AQI on specific occasions etc. in the area of Municipal Corporation.

All steel Fully forward control driverʹs cab. Cabin should have minimum two nos. foam

padded adjustable seats with seat belts. Cab should have all standard accessories provided

by truck chassis manufacturer and shall confirm to requirements of Motor Vehicles Act.

The truck chassis shall be suitable to handle the specified load, provide satisfactory service

envisaged and shall comply with all provisions of Motor Vehicles Act.

The vehicle‐ equipment shall confirm to the following minimum requirements/ specifications:

1 ENGINE: Direct injection water cooled diesel engine having engine

capacity minimum of 130 HP @ rated rpm or as per CMVR. It

must have min. BS‐ 6 OBD 2 emission norms complied engine.

2 MIN.TORQUE: Minimum 450 N‐m at 1400‐1600 RPM or as per CMVR

/ARAI / ICAT / other approval authority of GOI.

3 AIR FILTER: Oil bath type, remote mounted or Dry type its equivalent or

as per CMVR /ARAI / ICAT / other approval authority of GOI.

4 CLUTCH: Single plate, dry friction type and outside diameter of clutch

lining 330 MM minimum. or as per CMVR /ARAI / ICAT /

other approval authority of GOI.

5 GEAR BOX: Synchromesh 5 forward and 1 reverse.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 22 -

6 FRONT AXLE: Heavy duty, forged I beam, Reverse Elliot type or Semi‐

elliptical or as per CMVR /ARAI / ICAT/ other approval

authority of GOI.

7 REAR AXLE: Single reduction, hypoid gears, fully floating axle shafts or as

per CMVR /ARAI / ICAT / other approval authority of GOI.

8 BRAKES: Service brakes‐Dual circuit full air S‐cam brakes. Parking

brake‐spring actuated parking brake acting on rear wheels or

as per CMVR /ARAI / ICAT / other approval authority of GOI.

9 FRAME: Ladder type frame with riveted/bolted cross members side

members are of channel section or as per CMVR /ARAI / ICAT

/ other approval authority of GOI.

10 SUSPENSION: Semi elliptical leaf spring at front and rear / or as per CMVR

/ARAI / ICAT / other approval authority of GOI.

11 TYRES: 10.00 X 20 ‐ 16 PR or higher size Front: 2, Rear: 4, Spare: 1 or

as per CMVR /ARAI / ICAT / other approval authority of GOI.

12 FUEL TANK: 150 litres capacity minimum or as per CMVR /ARAI / ICAT /

other approval authority of GOI.

13 CAB: All‐steel full‐forward control driverʹs cab

14 ELECTRICAL SYSTEM: System voltage‐12 Volts / 24‐ Volts.

15 WHEEL BASE: Min. 4000 mm

16 Min. Permissible GVW: Appx. 18000 Kg

Specifications for driver cabin (If cabin not provided by chassis manufacturer, otherwise as per

the standard dimensions, materials and design of chassis manufacturer).

Driver Cabin: All steel welded full forward driversʹ cabin with steel structure and M.S.

Panelling should be provided. It should be dust and water sealed and with sound and

heatproof treatment.

DIMENSIONS: The length of the driver Cabin should be l500 mm for as per requirement for

proper fixing of cabin support spring and height should be l500 mm minimum from inside the

cabin. The width of the Driverʹs cabin should be as per FES, Shape of the driver cabin should

be such that which offers min. Air resistance. (Aerodynamic shape)

FRAME WORKS : The complete front end structure and super structure should be fabricated

from 2.00 mm Mild Steel pressed\rolled standard sections reinforced with gussets and cloats,

joined together by means of welding \ riveted wherever necessary. All the screws, bolts, nuts

etc. should be nuts proofed and Nylock only.

All the structure members used in the fabrication should be fabricated on Jig.

OUTER PANELLING: The outer panelling and inner panelling should be fabricated from (1.6

mm) sheet with joint at top riveted /soldered / welded. It should be finish for good appearance

and easy cleaning.

Inner Panelling: Roof should be of made of 20 G. inner and outer CRC sheet with lʺ thick

thermo coal in between.

Driver Cabin : All steel welded driverʹs cabin with steel structure and M.S. panelling should

be provided. It should be dust and water sealed and with sound and heatproof treatment. For

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 23 -

clear visibility singlewide curved/ both side wind screen glass with wiper motor/s should be

provided, wind up type front door on both sides should be provided with heavy duty hinges

and locking arrangements. It should be fully painted with glass finish, All‐steel full‐forward

control driverʹs cab having easy maintenance facility and provision for maintenance of various

engine, electric, chassis related parts. Necessary controls and other provisions as per latest RTO

rules must be provided inside the driver cabin. Proper lighting and seating arrangements for

driver and co driver with metallic pouch for keeping log diary should be provided.

Specification for Fabrication and mounting of Appx.8000 Ltr. capacity Nuisance Water

1. Capacity of tank shall be Appx.8000 ltrs.

1. Tank shall be fabricated from 5 MM thick M.S. plate.

2. Front and rear end shall be strengthened by angle ring fabricated from 40  40  6 mm

and welded continuously.

3. Diagonal reinforcement of 40  40  6 mm M.S. angle shall also be provided at both

4. Ends shall be welded externally & internally to the shell.

5. 2 nos. full partition plate straight shall be provided up to approximate 250 mm above

at the middle of the tank made from 5 mm thick M.S. plate.

6. Manhole with Cover size 400 mm  shall be provided in each portion & it shall be

bolted with rubber gasket of 6 mm thick properly so that during braking of vehicle the

water should not come out.

7. One manhole cover shall be provided of 125 mm  hole with a pipe 125 mm  welded

in such a way that pipes end remain 50 mm in top & 150 mm inside the tank.

8. Drain hole with 100 mm AUDCO or other reputed brand Butter fly valve shall be

provided at the bottom of the tank at the rear end.

9. Hose pipe :‐ The hose rack shall be provided on the side of the tank.

10. Drain hole with 80 mm size with flange (rubber gasket‐ dead end plug) shall be

provided at the bottom of the tank at the rear end for draining and cleaning of the tank

as and when required.

11. Both side wooden platforms made from teak wood of size 300 mm  25 mm shall be

provided along the full length of the tank with supporting 35 x 35 x 5 mm angle

structure for laying the hose.

12. Tank should be mounted in such a way that the inclination from front to rear end of

the shall be 5 mm in 100 mm length.

13. TANK MOUNTINGS :‐

A semi circular reinforcement shall be provided at each mounting support i.e. 8 mm

thick  100 mm wide. A mounting support shall be bolted properly with sandwich pad

i.e. 10 mm & 12 mm thick M.S. plate. Upper & Lower respectively in middle of that

Rubber a packing 25 mm thick shall be provided. Tank bottom should vertically

supported by 10 mm thick gusset plate.

At front end of tanker two mounting support shall be provided approximately at

mm distance. Tanker mountings should be fabricated as per our instructions.

Mounting shall be fabricated in such a way that it should be 5 mm in 100 mm taper for

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 24 -

easy discharge towards rear end. Other required supports shall be provided at proper

distance considering static & dynamic load during operation.

Tank shall be tested for any leakage in presence of our authorized representative. If

any leakage is observed it shall have to be set right prior to acceptances.

Tanker shall be supplied with Kirloskar make engine coupled with min. 10 HP capacity

pump or latest with 1ʺ  PVC braded Duplon make (50 Mtr.) wire braided hose and

connecting nozzle for spraying of the water. All necessary connection, mounting of

pumps with support structure etc shall be carried out by the tenderer. Sample can be

seen at our central workshop. Mounting of the pump & engine should be with base

plate & such that so that it can dampen the vibrations.

The tank shall be provided with two coats of anticorrosive epoxy paint internally after

applying primer. Outer surface shall be applied with primer & after that first grade

synthetic enamel paints in two coats shall be applied externally as per the instruction.

The supplier should paint/ provide number and messages on the body as per AMC

o All welding work must be MIG welding only. All necessary finishing shall be carried

out prior painting. Welding wire shall be of ESAB/ADOR/L&T only.

o All angle and channels and other raw materials are as per Indian standard.

o All MS material shall be of Tata / SAIL/ Indalco / Jindal / Vishakhapatnam steel/ Essar

/Ispat/ (for angle/ channel if not available of above brand then it shall be of IS/ISO

approved make) only.

All required safety & warning control system & mechanism should be provided in

 Party has to submit the latest test certificate/report for quoted model of ARAI / CMVR

confirming BS norms as applicable, detailed drawing of entire unit etc along with its

Tenderer has to furnish the following details.

 Engine H.P. at RATED R.P.M.

 Transmission details.

 Gross and net load capacity.

 Party has to submit the list of their authorized service centers in the Ahmedabad,

 Any other relevant technical details.

OTHER INSTRUCTIONS:

The tenderer shall offer the Model which is current standard model of production,

also which is substantially the same as one proved in successful use.

A standard and recommended tool kit shall be supplied along with the tanker for regular

maintenance of the vehicle and all fittings and attachments.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 25 -

INSTRUCTION MANUAL:

Copies of each operation instructions manual, service manual and spare parts list shall be

supplied with each Vehicle.

The successful tenderer shall make arrangement for testing/ demonstration of the Truck

both at the works of manufacturer (if required) and at the Municipal site (as may be

required). The tenderer shall issue a test certificate for the performance of the water

 Inspection of the fully built unit will be done by Joint Director (Mech.) and / or his

representative and during inspection if any minor modification /suggestion recommended

for better working of the system, same shall be implemented by contractor without any

Contractor’s Sign Joint Director (Mechanical)

With seal Central Workshop

Ahmedabad Municipal Corporation

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 26 -

Nuisance Tanker (Appx. 3000 Ltr Capacity)

TECHNICAL SPECIFICATIONS OF NUISANCE TANKER (APPX.

LTR. CAPACITY) VEHICLE

Name of Work: Supply and Testing‐ Commissioning of Nuisance Tanker of Appx. 3000 Liter

capacity with new cab‐chassis as per AMC Tender Specifications and requirements ‐ 05 Nos.as

per tender scope of work & terms conditions.

The equipment shall be designed, fabricated, mounted and integrated to the chassis having

minimum BS‐ 6 OBD 2 norms & matching all requirements of various govt. agencies / RTO

rules/ norms & the following technical specification as the minimum requirement

Functional Requirements: Cab‐chassis is required to build up the NuisanceTanker having

Appx. 3000 Litre capacity with required engine ‐ pump set as mentioned in the specifications

for various Municipal utility related works including washing of community toilets, pay & use

toilets, public urinals, spraying of water for general purpose as well as specific purpose to

reduce AQI on specific occasions etc. in the area of Municipal Corporation.

All steel Fully forward control driverʹs cab. Cabin should have minimum two nos. foam

padded adjustable seats with seat belts. Cab should have all standard accessories provided

by truck chassis manufacturer and shall confirm to requirements of Motor Vehicles Act.

The truck chassis shall be suitable to handle the specified load, provide satisfactory service

envisaged and shall comply with all provisions of Motor Vehicles Act.

The vehicle‐ equipment shall confirm to the following minimum requirements/ specifications:

1 ENGINE: Direct injection water cooled diesel engine having engine

capacity minimum of 80 HP @ rated rpm or as per CMVR. It

must have min. BS‐ 6 OBD 2 emission norms complied engine.

2 MIN.TORQUE: Minimum 225 N‐m at 1400‐1600 RPM or as per CMVR

/ARAI / ICAT / other approval authority of GOI.

3 AIR FILTER: Oil bath type, remote mounted or Dry type its equivalent or

as per CMVR /ARAI / ICAT / other approval authority of GOI.

4 CLUTCH: Single plate, dry friction type and outside diameter of clutch

lining 330 MM minimum. or as per CMVR /ARAI / ICAT /

other approval authority of GOI.

5 GEAR BOX: Synchromesh 5 forward and 1 reverse.

6 FRONT AXLE: Heavy duty, forged I beam, Reverse Elliot type or Semi‐

elliptical or as per CMVR /ARAI / ICAT/ other approval

authority of GOI.

7 REAR AXLE: Single reduction, hypoid gears, fully floating axle shafts or as

per CMVR /ARAI / ICAT / other approval authority of GOI.

8 BRAKES: Service brakes‐Dual circuit full air S‐cam brakes. Parking

brake‐spring actuated parking brake acting on rear wheels or

as per CMVR /ARAI / ICAT / other approval authority of GOI.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 27 -

9 FRAME: Ladder type frame with riveted/bolted cross members side

members are of channel section or as per CMVR /ARAI / ICAT

/ other approval authority of GOI.

10 SUSPENSION: Semi elliptical leaf spring at front and rear / or as per CMVR

/ARAI / ICAT / other approval authority of GOI.

11 TYRES: 7.50 X 16 ‐ 14 PR or higher size Front: 2, Rear: 4, Spare: 1 or as

per CMVR /ARAI / ICAT / other approval authority of GOI.

12 FUEL TANK: 100 litres capacity minimum or as per CMVR /ARAI / ICAT /

other approval authority of GOI.

13 CAB: All‐steel full‐forward control driverʹs cab

14 ELECTRICAL SYSTEM: System voltage‐12 Volts / 24‐ Volts.

15 WHEEL BASE: 3475 mm to 3650 mm

16 Min. Permissible GVW: Appx. 8000 Kg

Specifications for driver cabin (If cabin not provided by chassis manufacturer, otherwise as per

the standard dimensions, materials and design of chassis manufacturer).

Driver Cabin: All steel welded full forward driversʹ cabin with steel structure and M.S.

Panelling should be provided. It should be dust and water sealed and with sound and

heatproof treatment.

DIMENSIONS: The length of the driver Cabin should be l500 mm for as per requirement for

proper fixing of cabin support spring and height should be l500 mm minimum from inside the

cabin. The width of the Driverʹs cabin should be as per FES, Shape of the driver cabin should

be such that which offers min. Air resistance. (Aerodynamic shape)

FRAME WORKS : The complete front end structure and super structure should be fabricated

from 2.00 mm Mild Steel pressed\rolled standard sections reinforced with gussets and cloats,

joined together by means of welding \ riveted wherever necessary. All the screws, bolts, nuts

etc. should be nuts proofed and Nylock only.

All the structure members used in the fabrication should be fabricated on Jig.

OUTER PANELLING: The outer panelling and inner panelling should be fabricated from (1.6

mm) sheet with joint at top riveted /soldered / welded. It should be finish for good appearance

and easy cleaning.

Inner Panelling: Roof should be of made of 20 G. inner and outer CRC sheet with lʺ thick

thermo coal in between.

Driver Cabin : All steel welded driverʹs cabin with steel structure and M.S. panelling should

be provided. It should be dust and water sealed and with sound and heatproof treatment. For

clear visibility singlewide curved/ both side wind screen glass with wiper motor/s should be

provided, wind up type front door on both sides should be provided with heavy duty hinges

and locking arrangements. It should be fully painted with glass finish, All‐steel full‐forward

control driverʹs cab having easy maintenance facility and provision for maintenance of various

engine, electric, chassis related parts. Necessary controls and other provisions as per latest RTO

rules must be provided inside the driver cabin. Proper lighting and seating arrangements for

driver and co driver with metallic pouch for keeping log diary should be provided.

Specification for Fabrication and mounting of Appx.3000 Ltr. capacityNuisance Water

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 28 -

1. An Elliptical tank having 3049 mm length with 1400 mm and 850 mm Major and minor axis.

Radius at major and minor axis should be as per geometry.

2. Capacity of tank shall be Appx. 3000 ltrs.

3. Tank shall be fabricated from 5 MM thick M.S. plate.

4. Front and rear end shall be strengthened by angle ring fabricated from 40  40  6 mm and

welded continuously.

5. Diagonal reinforcement of 40  40  6 mm M.S. angle shall also be provided at both end.

6. Ends shall be welded externally & internally to the shell.

7. A full partition plate straight shall be provided up to approximate 230 mm above at the

middle of the tank made from 5 mm thick M.S. plate.

8. One Manhole with Cover size 400 mm  shall be provided & it shall be bolted with rubber

gasket of 6 mm thick properly so that during braking of vehicle the water should not come

9. One manhole cover shall be provided of 125 mm  hole with a pipe 125 mm  welded in

such a way that pipes end remain 50 mm in top & 150 mm inside the tank.

10. Drain hole with 80 mm size with flange (rubber gasket‐ dead end plug) shall be provided at

the bottom of the tank at the rear end for draining and cleaning of the tank as and when

11. Hose pipe :‐ The hose rack shall be provided on the side of the tank.

12. Drain hole with 80 mm size with flange (rubber gasket‐ dead end plug) shall be provided at

the bottom of the tank at the rear end for draining and cleaning of the tank as and when

13. Both side wooden platforms made from teak wood of size 300 mm  25 mm shall be

provided along the full length of the tank with supporting 35 x 35 x 5 mm angle structure

for laying the hose.

14. Tank should be mounted in such a way that the inclination from front to rear end of the

shall be 5 mm in 100 mm length.

TANK MOUNTINGS :‐

A semi circular reinforcement shall be provided at each mounting support i.e. 8 mm thick 

mm wide. A mounting support shall be bolted properly with sandwich pad i.e. 10 mm &

mm thick M.S. plate. Upper & Lower respectively in middle of that Rubber a packing 25 mm

thick shall be provided. Tank bottom should vertically supported by 10 mm thick gusset plate.

At front end of tanker two mounting support shall be provided approximately at 450 mm

distance. Tanker mountings should be fabricated as per our instructions. Mounting shall be

fabricated in such a way that it should be 5 mm in 100 mm taper for easy discharge towards

rear end. Other required supports shall be provided at proper distance considering static &

dynamic load during operation.

Tank shall be tested for any leakage in presence of our authorized representative. If any leakage

is observed it shall have to be set right prior to acceptances.

Tanker shall be supplied with TAF‐1 , Kirloskar make engine coupled with SP3L + pump or

latest with 1ʺ  PVC braded Duplon make (50 Mtr.) wire braided hose and connecting nozzle

for spraying of the water. All necessary connection, mounting of pumps with support structure

etc shall be carried out by the tenderer. Sample can be seen at our central workshop. Mounting

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 29 -

of the pump & engine should be with base plate & such that so that it can dampen the

The tank shall be provided with two coats of anticorrosive epoxy paint internally after applying

primer. Outer surface shall be applied with primer & after that first grade synthetic enamel

paints in two coats shall be applied externally as per the instruction.

The supplier should paint/ provide number and messages on the body as per AMC

o All welding work must be MIG welding only. All necessary finishing shall be carried

out prior painting. Welding wire shall be of ESAB/ADOR/L&T only.

o All angle and channels and other raw materials are as per Indian standard.

o All MS material shall be of Tata / SAIL/ Indalco / Jindal / Vishakhapatnam steel/ Essar

/Ispat/ (for angle/ channel if not available of above brand then it shall be of IS/ISO

approved make) only.

All required safety & warning control system & mechanism should be provided in

 Party has to submit the latest test certificate/report for quoted model of ARAI / CMVR

confirming BS norms as applicable, detailed drawing of entire unit etc along with its

Tenderer has to furnish the following details.

 Engine H.P. at RATED R.P.M.

 Transmission details.

 Gross and net load capacity.

 Party has to submit the list of their authorized service centers in the Ahmedabad,

 Any other relevant technical details.

OTHER INSTRUCTIONS:

The tenderer shall offer the Model which is current standard model of production, also which

is substantially the same as one proved in successful use.

A standard and recommended tool kit shall be supplied along with the tanker for regular

maintenance of the vehicle and all fittings and attachments.

INSTRUCTION MANUAL:

Copies of each operation instructions manual, service manual and spare parts list shall be supplied

with each Vehicle.

The successful tenderer shall make arrangement for testing/ demonstration of the Truck both at

the works of manufacturer (if required) and at the Municipal site (as may be required). The

tenderer shall issue a test certificate for the performance of the water tanker.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 30 -

 Inspection of the fully built unit will be done by Joint Director (Mech.) and / or his

representative and during inspection if any minor modification /suggestion recommended

for better working of the system, same shall be implemented by contractor without any

Contractor’s Sign Joint Director (Mechanical)

With seal Central Workshop

Ahmedabad Municipal Corporation

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 31 -

Nuisance Tanker (Appx. 1000 Ltr Capacity)

TECHNICAL SPECIFICATIONS OF NUISANCE TANKER (APPX.

LTR. CAPACITY) VEHICLE

Name of Work: Supply and Testing‐ Commissioning of Nuisance Tanker of Appx. 1000 Liter

capacity with new cab‐chassis as per AMC Tender Specifications and requirements ‐ 05 Nos.as

per tender scope of work & terms conditions.

The equipment shall be designed, fabricated, mounted and integrated to the chassis having

minimum BS‐ 6 OBD 2 norms & matching all requirements of various govt. agencies / RTO

rules/ norms & the following technical specification as the minimum requirement

Functional Requirements: Cab‐chassis is required to build up the NuisanceTanker having

Appx. 1000 Litre capacity with required engine ‐ pump set as mentioned in the specifications

for various Municipal utility related works including washing of community toilets, pay & use

toilets, public urinals, spraying of water for general purpose as well as specific purpose to

reduce AQI on specific occasions etc. in the area of Municipal Corporation.

All steel Fully forward control driverʹs cab. Cabin should have minimum two nos. foam

padded adjustable seats with seat belts. Cab should have all standard accessories provided

by truck chassis manufacturer and shall confirm to requirements of Motor Vehicles Act.

The chassis shall be suitable to handle the specified load, provide satisfactory service

envisaged and shall comply with all provisions of Motor Vehicles Act.

The vehicle‐ equipment shall confirm to the following minimum requirements/ specifications:

1 ENGINE: Direct injection water cooled diesel engine having engine

capacity minimum of 60 HP @ rated rpm or as per CMVR. It

must have min. BS‐ 6 OBD 2 emission norms complied engine.

2 MIN.TORQUE: Minimum 125 N‐m at 1400‐1600 RPM or as per CMVR

/ARAI / ICAT / other approval authority of GOI.

3 AIR FILTER: Oil bath type, remote mounted or Dry type its equivalent or

as per CMVR /ARAI / ICAT / other approval authority of GOI.

4 CLUTCH: Single plate, dry friction type or as per CMVR /ARAI / ICAT /

other approval authority of GOI.

5 GEAR BOX: Synchromesh 4 forward and 1 reverse or as per CMVR /ARAI / ICAT / other

approval authority of GOI.

6 ELECTRICAL SYSTEM: System voltage‐12 Volts / 24‐ Volts.

7 WHEEL BASE: 2000mm to 2500 mm

8 Min. Permissible GVW: Appx. 2500 Kg

Specifications for driver cabin (If cabin not provided by chassis manufacturer, otherwise as per

the standard dimensions, materials and design of chassis manufacturer).

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 32 -

Driver Cabin: All steel welded full forward driversʹ cabin with steel structure and M.S.

Panelling should be provided. It should be dust and water sealed and with sound and

heatproof treatment.

Specification for Fabrication and mounting of Appx. 1000 Ltr. capacity

Nuisance Water Tanker

1. Capacity of tank shall be Appx. 1000 ltrs.

Following accessories/ mechanism shall be provided with required mounting and connections

for pressurized water spray.

1000 Ltr. Sintex / National Make PVC Tank

DIESEL ENGINE :

10 H.P. (Greaves or any IS/ISO brand) Self Start

PLUNGER PUMP : High Pressure Triplex Plunger Pump having

Discharge of appx 40 LPM & Pressure Up to 50 Bar

HOSE REAL : Heavy Duty Made From M.S. Plate & S.S. Rotary

HOSE PIPE : High Pressure Hose Pipe 3/8ʺ, 60 Mtr. Length with

Capacity up to 200 Bar of Gates/Kissan craft/

BODY :  Rear pump and engine shall be covered with

Aluminum body for protection having

following minimum specifications;

 Base Frame 75 x 40 M.S. Channel

 Structure 25 x 25 x 2 mm Asian / Surya M.S.

 Floor: 1.6 mm GI

 Rear door shall be shutter type and shall be

lockable and provided with proper

mechanical system and locking mechanism.

 Body 18 Gauge Aluminum Sheet.

Above tank mounting shall be provided Complete with All Pipe Connections Panel Board,

Level Gauge & required Accessories.

Tank shall be tested for any leakage in presence of our authorized representative. If any leakage

is observed it shall have to be set right prior to acceptances.

Mounting of the pump & engine should be with base plate & such that so that it can dampen

the vibrations.

The tank shall be provided with two coats of anticorrosive epoxy paint internally after applying

primer. Outer surface shall be applied with primer & after that first grade synthetic enamel

paints in two coats shall be applied externally as per the instruction.

The supplier should paint/ provide number and messages on the body as per AMC

o All welding work must be MIG welding only. All necessary finishing shall be carried out

prior painting. Welding wire shall be of ESAB/ADOR/L&T only.

o All angle and channels and other raw materials are as per Indian standard.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 33 -

o All MS material shall be of Tata / SAIL/ Indalco / Jindal / Vishakhapatnam steel/ Essar /Ispat/

(for angle/ channel if not available of above brand then it shall be of IS/ISO approved make)

All required safety & warning control system & mechanism should be provided in built.

 Party has to submit the latest test certificate/report for quoted model of ARAI / CMVR

confirming BS norms as applicable, detailed drawing of entire unit etc along with its

Tenderer has to furnish the following details.

 Engine H.P. at RATED R.P.M.

 Transmission details.

 Gross and net load capacity.

 Party has to submit the list of their authorized service centers in the Ahmedabad, Gujarat.

 Any other relevant technical details.

OTHER INSTRUCTIONS:

The tenderer shall offer the Model which is current standard model of production, also which

is substantially the same as one proved in successful use.

A standard and recommended tool kit shall be supplied along with the tanker for regular

maintenance of the vehicle and all fittings and attachments.

INSTRUCTION MANUAL:

Copies of each operation instructions manual, service manual and spare parts list shall be supplied

with each Vehicle.

The successful tenderer shall make arrangement for testing/ demonstration of the Truck both at

the works of manufacturer (if required) and at the Municipal site (as may be required). The

tenderer shall issue a test certificate for the performance of the water tanker.

 Inspection of the fully built unit will be done by Joint Director (Mech.) and / or his

representative and during inspection if any minor modification /suggestion recommended

for better working of the system, same shall be implemented by contractor without any

Contractor’s Sign Joint Director (Mechanical)

With seal Central Workshop

Ahmedabad Municipal Corporation

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 34 -

APPENDIX ‐ 1 (Continue)

SCOPE OF WORK For O & M WORK

Comprehensive Operation and Maintenance Contract For 5 (Five) Years of Nuisance

Tanker Vehicles of Different capacities for Municipal Solid Waste Management as per

AMC tender specifications, scope ofwork & terms ‐conditions.

 The scope of work is cleaning of various types of toilets & urinal units including

community toilets, public toilets, pay & use toilets, spraying of water at various plots,

waste management sites etc. located at / installed at / provided at various locations in

AMC and Comprehensive, Operation & Maintenance Contract of Nuisance tanker of

different capacities for the period of 5 years as per specification and conditions

mentioned in the tender document. The contractor shall have to commence the work

within 7 days from the date of issuance of Nuisance tanker of different capacities given

to them by AMC and shall have to scale it up to the expected level within 15 days. The

transportation, cleaning and comprehensive O & M Contract will be for a period of

years from the date of commencement of work subject to annual renewal as mentioned

in the document. The same can be extended for a further period of 2 (Two Years) Years

by the corporation and on the terms and conditions mutually agreed upon in writing.

 Contractor has to deploy the Nuisance tanker of different capacitiesat different

locations in various zones for cleaning of various types of toilets & urinal units

including community toilets, public toilets, pay & use toilets, spraying of water at

various plots, waste management sites etc. located at / installed at / provided at various

locations in AMC as per the instructions of SWM dept / Central workshop dept /

related dept of AMC on daily basis &/or as per the requirements of AMC. Also as &

when required bridge cleaning & other Infrastructure cleaning of AMC shall also be

carried out by these vehicles as per instructions of concerned AMC official/s.

Contractor has to attend the units with Nuisance tanker of different capacitieswith

driver and labour. Transportation shall be done timely and as per the instructions of

officer In charge of AMC. There should not be any leaking of fresh water or used water

/ treated sewerage water from the unit/s during transportation as well as while parked

at location/s parking place/s. All necessary tools, tackles shall be provided by him and

shall have to ensure cleaning of the unit/s. All necessary records shall be kept

maintained on daily basis. Every day unit/s shall be cleaned timely and on usage by

contractor, so that no bad smell or odour should come out from the unit and available

in clean and hygienic condition for next use. Contractor shall have to provide fresh

water / treatedsewerage waterin storage tank and clean the units internally &

externally of toilet units. He has to attend different units properly & has to spray the

disinfectants (provided by AMC) as informed by AMC officer incharge. Successful

tenderer has to maintain the units kept at various points. Timely repair (i.e. body work,

color, hydraulic system, pumps, wheels, vehicleetc. shall be repaired/ replaced by him

as per the requirements) of entire unit/s with labour shall be carried by him.

The operation of vehicles shall be confirming to Operation manual of the vehicle

manufacturer. The repairs & maintenance shall be carried out, as per the practice

prescribed by manufacturer/instructed by Central Workshop.

The Contactor shall ensure that his personnel report work every day at designated time

and continue working throughout the day. The contractor shall make provision for

presence of requisite manpower during national holidays and festivals so that the work

is not affected at any site in the Amdavad city. The corporation for working on

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 35 -

holidays, national holidays, and festivals will make no separate payments. The

Contractor should ensure presence of his workforce at the specified time. The

contractor shall not be paid for any overtime charges for working at late hours so as to

complete the scope of work and maintain the cleanliness at various locations.

 Providing Nuisance tanker of different capacitiesas per the conditions & requirement

given in the tender document and daily operation and maintenance of these tanker

vehicles for complete duration of the contract period.

 Procure, provide, and maintain necessary tools, equipment vehicles, manpower, fuel

and other required items for Suction cum High pressure water tanker vehicles.

 Site work through these Vehicles shall be done on designated sites as instructed by

 The monitoring of the complete system will be done by AMC. The GPS system shall be

integrated with central command centre as / if instructed by AMC.

 The work shall be done at least 8 hours a day by each Vehicle. However the actual

timing may be reduced or extended by AMC as per the requirement of site conditions

and need of work.

 Route & schedule will be given by zonal SWM department/ other related dept.

 Contractor should procure / maintain / keep in stock, necessary tools, equipment,

vehicle, manpower, fuel, spares etc. for the Nuisance tanker of different capacitiesin

use. NO extra payment for these shall be made.

 The scope of work shall consist of operation and maintenance of Nuisance tanker of

different capacitiesowned by Amdavad Municipal Corporation including supply of all

spares and include the following;

1. Services of driver& labour (one each on Vehicle) and other manpower if required for

O&M including technical support of service engineer / technical person from

successful bidder’s office as per requirements and to carry out operation of Vehicle and

related activities in AMC as per the direction of Amdavad Municipal Corporation on

a normally 8 Hours shift which may be in day or as per the AMC’s requirement.

2. The quoted rate are based on a 8 hours / 12 Hours and 16 Hours operation of the

Vehicle, which includes

a. The time taken for cleaning of toilet units & other work as shown in scope of work

b. Moving the Vehicle from one place to another,

c. Moving the Vehicle from parking place to other areas and back,(excluded)

d. Lunch break of operation (not included) ‐ time will be decided & Communicated by

Zonal SWM officer/ other incharge of work as per work and route requirement.

e. Actual activity on site.

Successful bidder shall make the arrangement of operator accordingly.

3. The bidder shall have to submit schedule of maintenance and carry out the general

daily preventative maintenance as recommended by OEM in addition to minor break

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 36 -

downs as per the schedule of maintenance. Major/ Break down maintenance, if

required/incises will be permitted on written instruction to Central Workshop / AMC.

Daily preventative maintenance shall also include oiling, greasing, etc of all movable

4. Routine maintenance and servicing of Vehicle including replacement of oil, engine oil,

other oil and coolant liquid etc. Same shall in the scope of Contractor and remains to

be kept in stock according to the requirement and maintenance schedule as

recommended by OEM.

5. Vehicle shall be cleaned daily and service once in a month.

6. Routine consumable spares inventory shall be provided by bidder and maintain

minimum inventory to avoid any hassle in operation of Vehicle. The list of routine

consumable spares shall be submitted along with this offer.

7. All running/major repairs and break down repairs of entire Vehicle shall be in scope

of work including all necessary spares/accessories etc. required for smooth and

uninterrupted operation of Vehicle.

8. The equipments (Vehicle) shall be parked at any locations suggested by Zonal SWM

dept/officer in charge on day‐to‐day basis and shall be operated under the supervision

of SWM dept/ concern dept. user department. Parking facility shall be provided by the

AMC Zonal SWM dept/ concern dept. The Vehicle shall be parked during the non‐

working hours at the place directed by Zonal SWM Asst. / Dy. Director /Officer‐in‐

charge. Safety & Security of Vehicle during entire contract period including non‐

operative hours shall be ensured by contractor at their own cost.

9. All safety equipments required on Vehicle like Fire extinguishers, emergency torch,

etc. shall be provided before starting of contract and kept on Vehicle during operation

and maintenance period.

10. Day to day report/log sheet / computer record of operation shall be filled in by the

bidder staff and same shall be submitted to Zonal SWM dept / user dept operation in

charge on next day. The design of report shall be given by AMC operation in charge

and same shall be followed by bidder.

11. Bidder shall depute one person between all Vehicles as supervision to synchronize day

to day routine work management, repairing of Vehicle and follow up the instructions

given by user department. Further, bidder must visit as per as per requirements of

AMC to synchronies the O & M activity at his own cost.

12. The bidder shall also maintain register/ record for consumable, spare maintenance in

appropriate formats.

13. The bidder shall make every effort for complete safety of the AMC’s equipments while

performing the operation and maintenance at site.

14. Corporation will not be responsible for any accident/ hazard during operation and

maintenance of the equipments. All responsibility shall rest with the contractor.

Contractor must take all precautionary/ safety measures to avoid accident/ hazards etc.

15. During maintenance of Vehicle, for repairing of any parts/spares, equipments installed

in Vehicle, necessary vehicle such as extra man power, etc shall be arranged by the

successful bidder at his own cost and included in the scope of work.

16. During contract period, if Vehicle fails to work because of Vehicle is under

maintenance or lack of man power, the cost being paid towards operation and

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 37 -

maintenance will not be paid (in short” No work done‐ no payment” shall be given).

In addition to that necessary penalty as mentioned in tender towards minor & major

repair work time period for additional time taken for repairing in addition to the no

work‐no payment will be recovered as penalty.

17. All required statutory & Govt. formalities (if any) for carrying out such type of work

shall be complied by contractor & it is their responsibility.

The corporation has the right to charge the contractor for any damage caused to corporation

assets and the same shall be recovered from the contractor with immediate effect. Contractor

has to keep enough spare/stand by units for preventive and breakdown maintenance of all the

equipments as per the unit/equipment manufacturer’s guideline and this will be verified by

the Engineers of Central Workshop, at any time for smooth and uninterrupted working of

It is unlawful for the contractor to dump or dispose of solid waste garbage or recyclables upon

any street, alley, or other publicly owned property unless expressly authorized by the

corporation for special collection programs.

Contractor has to submit daily/weekly/monthly report of their work to the respective AMC

The operation of vehicles shall be confirming to Operation manual of the vehicles

manufacturer. The repairs & maintenance shall be carried out, as per the practice prescribed by

manufacturer/instructed by Central Workshop.

The Contactor shall ensure that his personnel report work every day at designated time and

continue working throughout the day. The contractor shall make provision for presence of

requisite manpower during national holidays and festivals so that the work is not affected at

any site in the Amdavad city. The corporation for working on holidays, national holidays and

festivals will make no separate payments. The Contractor should ensure presence of his

workforce at the specified time. The contractor shall not be paid for any overtime charges for

working at late hours so as to complete the scope of work and maintain the cleanliness at

various locations.

The corporation has the right to charge the contractor for any damage caused to corporation

assets and the same shall be recovered from the contractor with immediate effect. Contractor

has to keep enough spare/stand by units for preventive and breakdown maintenance of all the

equipments as per the unit/equipment manufacturer’s guideline and this will be verified by

the Engineers of Central Workshop, at any time for smooth and uninterrupted working of

(A) Comprehensive Operation:

i) As the operation of the vehicle on everyday basis is required, it would be the

responsibility of the successful bidder to provide 1 skilled operator having valid

driving license known to all operational activities of the vehicle on each vehicle per

shift (8) hours or as may be required on all the 365 days of the calendar year. There

would not be any services to be rendered on national holidays i.e. 26th January, 15th

August & 2nd October. Further each vehicle’s operation shall be stalled for 2 days in a

month for routine maintenance or as per the work requirements and instructions by

Central Workshop dept., AMC.

ii) Planning of rendering the services shall be based on 8 hours operational shift. However

based on SWM / Concern department requirement contactor has to provide vehicle for

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 38 -

actual work requirement. Daily route plan will be given by respective dept. head /

Officer incharge of work.

iii) During situations such as visits of VIPs successful bidder will be require to render

operational service even on National holidays. No extra payment (Other than one

which is approved) would be payable to the contractor form rendering operational

services on these events which is required to be noted by the successful bidder.

iv) Successful bidder will have to ensure that each and every vehicle must be covered with

their comprehensive insurance per year and that the next year’s insurance shall be

done before the expiry of the earlier year’s insurance. It may be noted that the

successful bidder will be paid as per the tendered offer sanctioned only. Necessary

documents shall be submitted by contractor.

v) To maintain the disciplined and efficient services, it would be necessary to appoint at

least one supervisor for this tender work better coordination in addition to operators

and provide them uniforms, safety gears & mobile facilities.

vi) As far as parking arrangement of the vehicles are concerned, the parking place shall be

made available by AMC, in respective zone by concern Asst. / Dy. Director (SWM) /

officer incharge.

vii) If due to less work &/or for any reason, AMC do not wish to run the vehicle/s for

8/12/16 hrs. shift then contractor will be paid on prorata basis for actual working hours

on that day. AMC decision & rate calculation in such event/s will be final & binding to

viii) Shift timing will be calculated (started) from start of vehicle from parking area & end

will be when vehicle come back again to parking area which is provided / identified

by concern Asst. / Dy. Director (SWM) / officer incharge. However; contractor has to

ensure fast & efficient movement of vehicle/s in all the case. If AMC finds any

inefficiency; can take necessary actions including payment deduction for such time &

will be binding to contractor. During normal travel Contractor has to ensure travelling

of vehicle on left side of road.

xi) A successful bidder shall maintain log sheet / Computer Record to enter the

information about the day to day works allotted to them by the representative of their

concern Asst. / Dy. Director (SWM) / officer incharge of work.

xii) For any default of service performance a penalty of amount equivalent or not more

than to the O & M cost of the specific vehicle and the length of the default area (at the

rate approved by AMC) shall be deducted /charged from the running bills. The details

of the events of default and the exact rate of penalties shall be as specified in tender

xiii) As a disciplinary measure, following penalties would be liveable so that the defaults

are not recurred as per the penalty shown in the penalty table.

Performance Guarantee For O & M contract work:

For Operation and maintenance contract work, Contractor has to submit performance security

deposit which shall be 5% of the one year O & M contract work amount based on daily 8 hrs

working shift approved rate as a contract security. This guarantee (BG) shall be renewed timely

(every yearly) till expiry of contract. The contractor shall furnish performance guarantee in the

form of Bank Guarantee (as per AMC rules) or by Demand draft/ pay order within 15 days

from the date of order from any Bank as per AMC Circular and made payable to the ʺMunicipal

Commissioner, Amdavad Municipal Corporationʺ. Payable at Amdavad which shall be

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 39 -

released after the successful completion of the contract period, subject to no due certificate from

the Corporation, If any amount is due from the contractor even after adjusting from monthly

bills, the same will be recovered from this amount. If PG is delayed more than 15 days, interest

will be charged for delayed period as per AMC rules.

‐ Forfeiture of Security money: ‐ Security amount in full or part may be forfeited in the

following cases:‐

(ii) When any terms and conditions of the contract is breached

(iii) When tenderer fails to comply the tender terms, scope of work and all necessary

work instructions given time to time by AMC; satisfactorily.

The decision of the Municipal Commissioner, AMC in this regard shall be final.

Notwithstanding the provisions of tender, the contractor shall not be liable for forfeiture of its

performance security, liquidated damages or termination for default, if and to the extent that,

its delay in performance or other failure to perform its obligations under the Contract is the

result of an event of Force Majeure.

For purposes of this Clause, ʺForce Majeureʺ means an event beyond the control of the

contractor and not involving the contractorʹs fault or negligence and not foreseeable. Such

events may include, but are not limited to, acts of the Purchaser either in its sovereign or

contractual capacity, wars or revolutions, fires, floods, epidemics, quarantine restrictions and

freight embargoes.

If a Force Majeure situation arises, the contractor shall promptly notify the Purchaser in writing

of such conditions and the cause thereof. Unless otherwise directed by the Purchaser in writing,

the contractor shall continue to perform its obligations under the Contract as far as is

reasonably practical, and shall seek all reasonable alternative means for performance not

prevented by the Force Majeure event.

Taxes and duties

It shall be included in the indicated price. Tenderer has to quote the total price, net including

of all taxes & duties, GST (as applicable) etc. and for evaluation and finalisation purpose, the

total price will be taken in to consideration. However any change in the GST tax, govt. statutory

levies will be considered at actual for payment purpose for which contractor will have to

submit necessary documentary proofs as required by department.

ELECTRIC SUPPLY

The contractor shall make payments of actual electric consumption bills to the electric supply

company, as and when the same are demanded (if separate plot for parking & / or repair ‐

maintenance given to them) In case of non‐payment of electric bill & supply company issues

notice for disconnection, the bill amount will be recovered from the regular monthly bill.

The electrical maintenance from time to time shall be carried out through license

electrician/wiremen only and all precautions shall be taken to avoid any accidents/mishap.

The contractor shall follow all the mandatory condition of electric supply of company & take

all the safety precautions as per statutory requirements. AMC department time and again

during the entire contract period also will verify this.

TOOLS & TACKLES

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 40 -

The successful tenderer shall provide all the required tools and tackles for the operation

maintenance of the equipments. Central Workshop department time and again during contract

period will verify this.

WORKS TO BE CARRIED OUT

The works to be carried out under this contract shall except or otherwise provided in these

conditions include all labour, materials, tools, plant, equipment and transport which may be

required for preparation of and for the full and entire execution andcompletion of the works.

The description given in the schedule/scope of works shall unless otherwise stated be held to

in and for the entire execution and completion as aforesaid in accordance with good practice

and recognized principles

CONTRACTOR’S SUPERVISION

The contractor shall himself supervise the execution ofworks or shall appoint a competent

person to act in his stead. If in the opinion of the Corporation the contractor has himself not

sufficient knowledge and experience to be capable of receiving instructions or cannot give his

full attention to the works, the contractor shall at his own expense employ or hisaccredited

person, having experience in the field of Operation and Maintenance of Suction cum High

pressure water tanker vehicles deployed for such activities. Orders given to the contractor’s

person shall be considered to have the same force or if these had been given to the contractor

himself. At least one common supervisor for all the vehicles shall be deployed by contractor

for better coordination of work.

SAFETY PROVISIONS

The contractor shall at his own expenses arrange for the safety and security precautions as

required by the Corporation/necessary for such services, in respect of all labor directly or

indirectly employed for performance of the works and shall provide all facilities in connection

therewith. In case the contractor fails to provide such facilities, the Corporation shall be entitled

to do so and recover the costs thereof from the contractor. Contractor has to manage for his

own security (if he require) for safety of the vehicle&/or its any part there of, even if parked at

AMC location also.

MATERIAL AND WORKMANSHIP

The tenderer shall at his cost provide all materials required for the works. All materials to be

provided by the tenderer shall be in conformity with the specifications laid down in the

tender/as per the vehicle manufacturerʹs specification/instruction, the contractor shall if

requested by the Head, Central workshop Department or his authorized representative furnish

proof to the satisfaction of the Engineer or his authorized representative that the materials so

comply. All charges on account of outcry, terminal or Sales tax and other duties on material

obtained for the works from any source shall be borne by the tenderer.

The AMC or his authorized representative shall be entitled to have tests carried out for any

material supplied/used by the contractor other than those for which as stated above,

satisfactory proof has already been produced, at the cost of the contractor and the contractor

shall provide at his expense all facilities which the Corporation may required for this purpose.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 41 -

If no tests are specified in the Contract and the Corporation requires such tests, the tenderer

shall provide all facilities required for the purpose and the charges for these tests shall be borne

by the contractor.

In order to maintain high standard of workmanship, the successful tenderer shall fix a schedule

for cleanliness and maintenance of the equipments. Sanitary conditions shall be maintained

throughout the period, with hygiene and environment getting the top priority.

The successful tenderer shall provide small size plantations wherever possible inside the area

allotted for Parking/ maintenance under O & M work to them.

OPERATION AND MAINTENANCE INCLUDING VEHICLES AND EQUIPMENT /

The contractor shall be responsible for smooth and satisfactory operation and maintenance

of the vehicles for 365 days round the year for a period of 5 (Five) Years from the date of start

More specifically, the contractor shall be responsible for the following: ‐

(1) To operate and maintain the vehicles in accordance with manufacturerʹs (Nuisance

tanker of different capacities) guideline. The vehicles attended to, by the contractor

including any ʺTrouble shootingʺ to ensure smooth and trouble free operation.

(2) The contractor shall prepare and implement, an effective operation and maintenance

programme in consultation with Central workshop Department, AMC. AMC will not

provide any skilled or unskilled work force, vehicle or equipment other than that

specified in the tender document. It is absolute responsibility of contractor to look after

all sorts of maintenance whether preventive or breakdown.

(3) The contractor shall determine operating parameters for work mentioned

above in scope of work.

(4) For the smooth operation of the vehicles all the required equipment, vehicles, units,

accessories, consumables including Fuel (Diesel), grease, lubricating oils, cleaning

agents, all types of epoxy paint, material required for housekeeping and cleaning etc.

are to be brought by the contractor. The quality of all consumable and spare as per

manufacture recommendation shall be made available at site/workshop all the time

and will be verified by Central Workshop department.

(5) The contractor shall be responsible for keeping up‐to‐date record of documents

including day to day log sheet of all the vehicles. The contractor shall maintain

and update logbook / computer record in which details of operational parameters are

recorded in every shift and at regular interval or as decided mutually.

The Contractor shall maintain separate checklist register for daily, weekly,

fortnightly, monthly, quarter yearly, half yearly and yearly activities.

(6) The contractor shall be responsible to carry out day‐to‐day as well as periodic

maintenance, necessary to ensure smooth and efficient performance / running of

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 42 -

all equipments as per manufacturer’s specification and maintaining the record of the

same. This will be verified by Central Workshop Department, AMC.

(7) The contractor shall have to issue identity cards with photographs, uniform to all

the staff employed for Operation and maintenance contract work.

It will be the responsibility of the successful tenderer to have comprehensive insurance

coverage of all vehicles, equipments etc along with their operating staff at their cost.

They are requested to note that there will not be any reimbursement in this regard by

AMC. In case any mishap / accident occurs on the road or at site, the successful

tenderer will have to shoulder the complete responsibility of the same, right from

registration of Police complaint, lodging / follow up of the insurance claim and facing

the court trials etc. It shall be the responsibility of successful tenderer to set right the

vehicle without raising any extra bills / claim against the same for reimbursing the

same from AMC. However, they shall be liable to receive all the payments received by

AMC (if claim amount issued to AMC by insurance company.) against the settlement

of insurance claims from the Insurance Institutions / it can be directly reimbursed to

the contractor by Insurance company. AMC authorities shall give the full cooperation

to the successful tenderer by signing the requisite documents necessary for raising the

insurance claim up to settlement of the same.

PROVISION OF GPS MECHANISM

Contractor as per the requirements of AMC, for effective communication shall provide

communication system/ equipments including GPS system (if asked by AMC) at his cost, as

per the AMC policy. At present AMC has decided to deduct Rs. 572/‐ per month per vehicle

for GPS system hardware and software expenditure, if GPS fixed by AMC. Detailed policy ‐

norms can be availed from AMC. Further if any change in policy will be made effective by

AMC, same shall be applicable to contractor, including charges for the same. In the event if

AMC ask contractor to provide GPS mechanism & its report system; then contractor has to do

so without any extra cost. (if GPS not provided by AMC.)

IMPORTANT NOTE:

The contractor shall employ all required staff including operation Supervisor, technical

experts, skilled and unskilled labours, drivers etc. required for such services.

Contractor shall comply with all safety rules and regulations and all inter disciplinary

measures as followed by the AMC and required for such services

The AMC shall not be responsible for any accident /injury to the staff of the contractor. It is

contractor’s responsibility to take insurance of his employee, medical facility, work

compensation etc. as per workman compensation act and all other relevant laws. Further the

AMC will not provide any insurance, medical facility, workman compensation, etc. to the staff

Due to strike by the contractorʹs employees, the operation and maintenance of vehicles must

not be affected and the property of AMC should not be damaged. In such case any

dispute/discrepancy occurs the decision of Dy.Municipal Commissioner (workshop / SWM

dept.) will be final and will be binding to the contractor. Also if any expense is required to be

made on this account by AMC, it will be deducted from Contractorʹs bill/SD.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 43 -

All Central/State Government/Semi‐Government/Local Bodyʹs Rules and Regulations

pertaining to this contract & / or services shall be strictly followed and observed by the

contractor without any extra cost to the AMC.

Payment will be made Every monthly against satisfactory work, as per certificates of various

authorities as mentioned in the tender.

The Security Deposit will be paid back only after the completion of entire Contract period

without any interest after deducting dues if any to be recovered from contractor.

The duration of the contract shall be for 5 years from the date of commencement of O & M

work. However AMC reserves the right to terminate the contract at any time by giving

months (30 days) notice to the contractor.

At the end of O & M contract period, contractor shall hand over Nuisance tanker of different

capacitiesin satisfactory working conditions acceptable to Municipal Commissioner &/or

Central Workshop Department / their authorized representative. Otherwise penalty equivalent

to the cost of repairs will be imposed by AMC at the discretion of Municipal Commissioner &

shall be binding to the contractor. This will be even recovered from the contractor from any of

his dues &/or security deposit with AMC.

AGREEMENT WITH MANUFACTURER FOR TECHNICAL BACKUP.

In case the tenderer is not the manufacturer/authorized dealer/agent/distributor/autho. service

dealer/ provider as mentioned in the tender, then the tenderer shall have proper tie‐up

agreement with the manufacturer/authorized dealer/agent/distributor for such vehicles duly

registered in India for the entire contract period, clearly stating that the

manufacturer/authorized dealer/agent/distributor will supply the spare parts, provide

technical support and services and with backup guarantee of the manufacturer/authorized

dealer/agent/distributor to AMC during the entire contract period.

This work is also inclusive of painting of vehicles at the regular interval of two year (if vehicle

found dirty) in normal case and as and when required in accidental/repairing situation. The

central workshop department will verify this. However, if any unit/mechanism will found to

have some defect in paintwork at any time, the Contractor has to repaint the same under the

instruction of Central workshop Engineer.

The contractor shall not employ guilty person or indiscipline person.

The Contractor shall have to take valid labour license & any other relevant license from

statutory bodies as required for this type of contract / services.

Successful bidder will have to follow all the provisions of, Labour laws, P.F. Act, E.S.I. Act,

Minimum Wages Act, workman compensation act etc. & have to incorporate changes made if

any during contract period also.

Contractor will have to strictly follow the provisions of Factory Act 1947, wages Payment

Act1936, Bonus Act 1965, Employees Provident Fund & Miscellaneous Provisions Act 1952 &

other Industrial & Labour Laws with latest amendments in act / rules related to this Operation

& Maintenance Work. Contractor will not be given any relaxation regarding these provisions.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 44 -

Routine / preventive / break‐down maintenance of vehicles including all work that has to be

perform with such vehicles are in the scope of Contract

Upon failure of the Contractor to comply with any instructions given in accordance with the

provisions of this contract, the AMC has the alternative right, instead of assuming charge of

entire work, to place additional labour force, tools, equipments and materials on such parts of

the works, as the AMC may designate or also engage another Contractor to carry out the work.

In such cases, the AMC shall deduct from the amount which otherwise becomes due to the

Contractor, the cost of such work and materials with 10% added to overall departmental

charges and should the total amount thereof exceed the amount due to the Contractor, the

charges and should the total amount thereof exceed the amount due to the Contractor, the

Contractor shall pay the difference to the AMC. It should be specifically noted that wherever

bank guarantee is required to be submitted, it should be from Nationalized Banks/scheduled

bank / AMC approved bank list only.

CONTRACT PERIOD

The successful tenderer on award of contract shall have to commence the O & M work within

7 days from the receipt of vehicles.

The Contract will be for a period of Five years from the date of commencement of O & M work

subject to annual renewal as under. The same can be extended for a further period of 2 (Two

Years) Years by the corporation and on the terms and conditions mutually agreed upon in

The Contract will be renewed automatically at the end of each year subject to the Contractor

scoring at least a score of 75 under the following heads

PERFORMANCE POINT CERTIFICATE TABLE:

Sr. Head Maximum Score of the

No Score Contractor

1 Punctuality in providing Nuisance tanker of

different capacitiesand overall efficiency of

2 Behavior and discipline of the staff with AMC

officers and employee during working

3 Maintenance of Nuisance tanker of different

4 Maintenance of GPS system with related

5 Maintenance of Other infrastructure /facility for

repair and maintenance of Nuisance tanker of

different capacitiesas per scope of work

6 Maintenance of extra fast moving spares and

consumable spares

The above score will be calculated at the end of each year. The performance shall be reviewed

and reported by Central Workshop Department (for Sr.no.3, 5 and 6) and Zonal SWM

Department (Sr.no.1, 2 & 4) of AMC (based on service requirement certification method can be

changed by AMC ‐ even can be judged based on monthly penalty statement) and at the end of

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 45 -

the year it will be reviewed by Dy. Municipal commissioner (Workshop) (even from monthly

penalty statement it will be concluded). If the average monthly score is above 75, the Contract

will get automatically renewed.

For O & M Contract Price will be as per the bid in the Annexure 4 and will be inclusive of all

expenses necessary for the continuance of the O & M services under the contract. Such

expenses shall include but not restricted to payments to RTA, Labor Authorities, Local and

Municipal Authorities, Semi Govt., or any charges, deposits, fuels, taxes, oil, lubricants, levies,

toll taxes, GST tax (if any) etc., connected with the service. The all‐inclusive rate should be

filled up in the respective column.

Rates quoted by tenderer shall be inclusive of GST and other terminal or tax etc. as may be

applicable and will be fixed for entire contract period. Only fuel price variation/change will be

applicable as per the condition and formula given in the tender document.

The corporation reserves the right to increase or decrease the scope of work by 25%. Contractor

shall have to carry out 25% extra work at the same rate, terms and conditions if asked to do so.

On specific occasions, the corporation reserves the right to ask the contractor to provide

additional services. The Contractor is bound to provide the same at a short notice of few hours.

The rates for additional services requested by the commissioner will be mutually agreed upon

between the Contractor and the commissioner.

The contractor shall provide well‐trained, disciplined, honest and sincere workforce,

throughout the contract period and supervise their work regularly.

They should not pose any problem, nuisance to the general public. The contractor shall be

solely responsible for the behaviors and honesty of its workforce.

The contractor shall appoint one supervisor to ensure that services are rendered effectively. He

must be available on site/at office during the working hours. At least one common supervisor

for the entire different ordered vehicles (part A to C as per price format) shall be deployed by

contractor for better coordination of work in the field.

The maintenance supervisor shall be qualified person, and with experience and competent and

authorized by the contractor to take decisions at site. Such supervisor shall be deemed to have

full authority of the contractor and any instructions given to him by the corporation officers

shall be deemed to have been given to the contractor. The supervisor should be easily accessible

at all times and should have a mobile phone with them at all times. The Contractor shall ensure

that the supervisor or any other authorized representative shall invariably be available either

in person or over the telephone within the city every day for taking necessary instruction and

for proper co‐ordination.

The tenderer shall indicate the manpower including supervisor & their labors he proposes to

deploy and the methodology to be adopted. Nodecrease in the workforce shall be done once

notified without prior written approval of the Municipal Commissioner / officer incharge of

work. The commissioner may deduct suitable payments to the contractor if it is noticed that

the workforce is reduced without prior approval.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 46 -

Contractor shall provide suitable uniform to all their staff including shoes and photo identity

The contractor must verify antecedents of the employees to be provided by the contractor

before deployment. The contractor shall engage no person having criminal record or who is

not the citizen of India.

The contractor may, at his own cost and responsibility, consider increasing his workforce,

equipments, and materials in order to discharge contractual obligation.

The Municipal commissioner reserves the right to ask for the replacement of the personnel not

found fit or suitable for undertaking the task assigned. The contractor shall do replacement

without any extra cost to the corporation within one week of the order.

Contractor shall pay salaries /wages etc. through bank to his workforce adhering to the laws in

force & all liabilities and responsibilities in respect of persons engaged by him shall lie with the

To avoid mishap or accident during the operation, the Contractor shall ensure that only skilled

staff / drivers with sufficient experience in their respective trade and physical fitness are

deployed on the job and are not put to over exertion as per prevailing labor laws of the State

and / or Central Governments.

The staff/drivers deputed by the contractor during the course of contract must behave decently

with the corporation’s officer and staff. The Contractor shall withdraw such person who is

found to be indiscipline, misbehaving, under or the influence of any intoxicant or whose

services are considered detrimental to the corporation’s Interest. On giving intimation to do so

by the Municipal Commissioner or his authorized representative. The corporation will serve a

Notice to the contractor if he fails to comply. Failure to replace the personnel after issuance of

notice by the corporation will be considered to be is sufficient ground for termination of the

contract. It will not be binding to the corporation to justify the reasons to the Contractor for

advising such withdrawal of staff.

The Drivers/operators of the contractor must be in possession of a valid professional driving

The contractor shall ensure that his personnel report to work everyday at designated time and

work sincerely throughout the period prescribed in the contract with AMC. The staff so

deployed shall be given the statutory weekly off. The contractor shall make provision for

substitute manpower during weekly off of the staff and statutory holidays so that the work is

not affected at any site in the City. The corporation will not pay any extra payment for making

substitute arrangements on weekly off and other holidays.

The contractor shall not be paid or reimbursed by the AMC for any overtime work done by his

staff to complete the task and for maintaining the cleanliness at various locations. The

Contractor, through his supervisor, shall submit a report to corporation about number of

workforce which have reported to work as against the agreed workforce (if asked by AMC).

OPERATIONS AND USE OF VEHICLES & EQUIPMENTS

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 47 -

The Contractor shall be fully conversant with all the laws applicable to the work under the

contract including Motor Transport Work’s Act 1961 and even any amendment thereof.

The contractor shall submit a detailed Operations and Maintenance schedule at the time of

starting of work. The Contractor shall submit within four weeks of award of work. All

Preventive Maintenance procedures and Corrective Maintenance procedures described in the

Operations and Maintenance Manual shall be followed by the contractor.

The corporation shall have a right to charge the contractor for any damage caused to

corporation assets during the performance of contract by the contractor and the same shall be

recovered from the contractor in a month or from the amount payable to him.

Contractor shall keep enough spares for units for replacement during breakdown or preventive

Materials used for Hydraulic units should be of standard make & as per instruction /

specifications of central workshop of AMC.

It shall not be permissible for the contractor to dump or dispose of solid waste, garbage, or

recyclables waste on any street, alley or other publicly owned property unless expressly

authorized by the corporation.

Contractor shall submit daily / weekly/monthly report of the work done to the officer of

concern deptt. and Central Workshop department; AMC from time to time in the Performa that

may be prescribed.

The contractor shall be liable for penalty as under if he fails to perform his contractual

obligations besides any other action; the Municipal Commissioner may decide to take as per

the terms of the contract.

‐ All minor repairing & preventive maintenance shall be carried out within 24 Hrs.

otherwise penalty will be imposed as per penalty shown in penalty table below, which

will be deducted from the monthly bill of the contractor. Preventive maintenance

schedule shall be prepared in coordination with central workshop department.

‐ All major repairing shall be carried out within 7 days (however shall be confirmed by

Engineer of Central Workshop, AMC) otherwise penalty will be imposed as per

penalty shown in penalty table, which will be deducted from the monthly bill of the

Sr. Type of default Penalty to be impost

1 If cleaning/washing/water spraying activity etc Entire shift work will be deducted

is not done properly (i.e. vehicle does not work for such event.

properly) on road.

2 In case the contractor fails to paint the vehicle at RS.100/‐ per Vehicle per day till

every 24 months (if original color found the same are painted.

3 The vehicle shall be exclusively used for AMC Rs. 5000/‐ for first such incidence

service only. Any deviation from this shall and then after Rs. 10,000/‐ for such

attract penalty incidence.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 48 -

4 Non use of mobile by any of Rs. 50/‐ for each of such event.

Supervisor/Manager &/Or Operator.

5 Not keeping valid driving license Rs. 300/‐ for each such event.

6 If any of the contractorʹs staff at the Vehicle is Rs. 25/‐ per person for that

found to be working without the prescribed shift/event.

safety gear, uniform etc.

7 If contractor fails to provide the driver as per the Rs. 500/‐ per person for that

requirement of AMC shift/event.

8 If contractor fails to provide the Labour as per Rs. 300/‐ per person for that

the requirement of AMC shift/event.

9 If the supervisor is not found on the work Rs. 500/‐ per such incidence

during the prescribed working hours (At site /

at their office)

10 If GPS system is found not working (if not Rs. 100/‐ per day till it starts

provided by AMC) functioning.

11 If the minor and major repairing work is not Rs. 500/‐ per such Vehicle per day.

carried out as per the schedule given in tender

The penalty will be deducted from the monthly bill of the contractor. Further in above

circumstances (sr.no. 7) AMC will be at liberty to use vehicle/s by an alternate arrangement and

during such circumstances if any damage occurs to the Vehicle same also must be set right by

the contractor for which no extra payment / claim will be reimbursed to the contractor by AMC.

This shall be binding on the contractor.

The tenderer / contractor shall keep the vehicles in perfect working condition to the satisfaction

of Central Workshop. AMC.

PAYMENTS FOR O & M WORK

The contractor shall raise monthly bills to the Central Workshop department for O & M contract

work at the rate agreed and approved under the contract.

Contractor shall submit his monthly bill in the 1st week of every month to the Central

Workshop deptt. From time to time along with duly certified work certificates as by respective

department and work done certificate as per the format given by AMC, from concern Asst. /

Dy. Director (SWM) / officer incharge of work

For O & M contract payment will be made only for those shifts/ working for which work has

been carried out by contractor and approved by concern Asst. / Dy. Director (SWM) / officer

incharge of work on the basis of per 8 hour shift/ 12 hours/ two shifts (i.e. 16 hour shift) rate

approved in tender.

Contractor will be paid on a monthly basis subject to his producing satisfactory performance

certificate for work carried out from various departments as mentioned in the tender.

Income Tax as per statutory provision shall be borne by the Contractor. The corporation shall

deduct all statutory taxes like advance Income Tax, GST ‐ TDS etc from monthly payments

being made to the Contractor.

Corporate Tax / any tax assessed on the income of the Contractor, GST (if any) shall be the

responsibility and payable by the Contractor

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 49 -

In case the contractor decides to stop the work during the continuance of the contract or

withdraws from the work without at least 60 days prior notice or if services are terminated by

the AMC on account of Deficiency in Service, the 5% Security Deposit (performance security)

amount shall be forfeited and the contractor shall have no claim on the same. Further, the

corporation reserves the right to make alternative arrangements until new agency takes over.

The additional cost incurred on the same shall have to be borne by the contractor

The Contractor shall ensure timely payments to his workforce and meet all the contractual

commitments in terms of payments, insurance, safety of its workforce. All statutory payments

to the workforce shall be done immediately upon becoming due. The proof of payments made

and any statutory deductions from the wages of the workforce shall be submitted within one

week of making payments as and when required by AMC.

If due to less work &/or for any reason, AMC do not wish to run the vehicle/s for 8/12/16 hrs.

shift then contractor will be paid on prorate basis for actual working hours on that day. AMC

decision & rate calculation in such event/s will be final & binding to all.

Shift timing will be calculated (started) from start of vehicle from parking area & end will be

when vehicle come back again to parking area which is provided / identified by concern Asst.

/ Dy. Director (SWM) / officer incharge of work However; contractor has to ensure fast &

efficient movement of vehicle/s in all the case. If AMC finds any inefficiency; can take necessary

actions including payment deduction & will be binding to contractor

ACCIDENT / DAMAGES / CLAIMS / LIABILITIES

In the event of any accident/damage to third party by any the vehicle of the corporation

operated by the contractor, the corporation shall be completely free from any liability of any

nature occurred on account of the accident. The Contractor will be fully and exclusively

responsible for the liabilities arise on account of accident and damage to the Vehicle, manpower

or to the third party. The Contractor will be fully and solely responsible for any death or bodily

injury to his staff member or any other person in the employment of the contractor or to any

other person during the performance of the contractual services to the AMC. This includes any

third party claims also.

The Contractor will be solely responsible for any consequences under various laws, arising out

of any accident caused by Vehicles, equipments or his employees to the property or personnel

of the corporation.

The corporation shall not be responsible for any claim / compensation that may arise due to

death / injury / damage caused by municipal Vehicle used by the contractor to any third party

or his own staff while providing services to AMC under the Contract.

INDEMNIFICATION

The Contractor shall bear responsibility for loss of or damage to the property, suffered by AMC,

death or injury to person (or any claim against AMC in respect thereof and all expenses relating

thereto) in connection with the services provided under the Contract resulting from any

negligent act or omission of the Contractor. The Contractor will hold the AMC fully

indemnified in respect thereof.

The indemnified party shall have the right, but not the obligation, to contest, defend, and

liquidate any claim, action, suit or proceeding by any third party alleged or asserted against

AMC in respect of, resulting from, related to or arising out of any matter for which the AMC is

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 50 -

entitled to be indemnified there under, and the reasonable costs and expenses thereof shall be

subject to the indemnification obligations of the Contractor there under. The Contractor shall

be liable for all payments, proceedings, and liabilities including payment of counsel fees.

The Contractor shall at all times indemnify the Municipal Corporation against all claims,

damages or compensation under the provisions of Payment of Wages Act 1936, Minimum

Wages Act 1948, and Departments Liability Act 1938, The Workmen’s Compensation Act

Industrial Dispute Act 1947, Indian Factories Act 1948 and Maternity Benefit Act 1951 or any

modifications thereof and rules made there under from time to time or as a consequence or any

accident or injury to any workmen or other persons in or about the works, whether in the

employment of the contractor or not, save and except where such accident or injury have

resulted from any act of the Municipal Corporation, their agents or servants and also against

all costs, charges and expenses of any suit, Action or proceedings arising out of such accident

or injury and against all sum or sums which may with the consent of the contractor be

paid to his obligations and liabilities as above provided. The Contractor shall insure against all

claims, damages or compensation payable under the various acts mentioned above or any

modifications thereof or any other law relating thereto.

Income Tax as per statutory provision shall be borne by the Contractor. The corporation shall

deduct all statutory taxes like advance Income Tax, GST TDS (if any) etc from monthly

payments being made to the Contractor.

Corporate Tax / any tax assessed on the income of the Contractor, GST tax (if any) shall be the

responsibility and payable by the Contractor.

In case the contractor decides to stop the work during the continuance of the contract or

withdraws from the work without at least 60 days prior notice or if services are terminated by

the AMC on account of Deficiency in Service, the 5% Performance Security deposit amount

shall be forfeited and the contractor shall have no claim on the same. Further, the corporation

reserves the right to make alternative arrangements until new agency takes over. The

additional cost incurred on the same shall have to be borne by the contractor

LIABILITY FOR DAMAGES AND RISKS

The Contractor shall be responsible for all risks to the work and shall make good at his own

cost, all loss or damage, whether to the works themselves or to any other Municipal property,

or third party or to the lives, persons, or property of others, from whatsoever cause, arising

out of, or in connection with the works, either during their progress or during the defects

liability period, and this although all reasonable and proper precautions may have been

taken by the Contractor, and in case the Commissioner or the Corporation shall be called

upon to make good any such costs, loss or damages, or to pay compensation (including

that payable under the provisions of Workmen’s Compensation Act ) to any person or

persons sustaining damage as aforesaid by reason of any act or of any negligence or

omissions on the part of the Contractor, the amount which the Commissioner may pay in

respect thereof and the amount of any costs or charges(including law costs and charges ) in

connection with legal proceedings which he may incur in reference thereto, shall be

charged to the Contractor. The Commissioner shall have full power and right at his own

discretion to pay or to defend or compromise any claim which may be made against the

Corporation for damage or in case of threatened legal proceedings, or in anticipation of legal

proceedings being instituted, consequent on the action or default of the Contractor, to take

such steps as he may consider necessary or desirable to ward off or mitigate the effect of such

proceedings charging to the Contractor, as aforesaid, any sum or sums of money which he

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 51 -

may pay and any expenses, whether for reinstatement or otherwise which he may incur and

the propriety of any payment, defense or compromise, or of the incurrence of any

such expense shall not be called in question by the Contractor and will be recovered from

the contractor.

The Contractor shall be held responsible for any obligations, damages and fines etc. arising out

of or in connection with theworks either during their progress or during the defects liability

period and shall indemnify the MUNICIPAL CORPORATION or the Commissioner against

them and make good any such damages, fines and dues arising out of non‐compliance of any

regulation by the Contractor which may develop on the Corporation or the Commissioner.

The Contractor shall ensure timely payments to his workforce and meet all the contractual

commitments in terms of payments, insurance, safety of its workforce. All statutory payments

to the workforce shall be done immediately upon becoming due. The proof of payments made

and any statutory deductions from the wages of the workforce shall be submitted within one

week of making payments.

The commissioner reserves the right to carry out inspection, as and when required without

intimating the contractor, of the various locations where work is in progress. Any shortcoming

found during inspection will be intimated to the contractor or his supervisor orally or in written

which shall have to be attended immediately by the contractor or his supervisor. The penalties

imposed on the contractor from time to time, shall be recovered from the Monthly Bill or

adjusted against the 5% SD amount. The corporation reserves the right to treat continuous

shortcomings as “Deficiency of Service” and terminate the Contract after giving one month

i) Notwithstanding the provisions of above, the contractor shall not be liable for forfeiture of

its Performance Security/ Contract Deposit, liquidated damages or termination or other failure

to perform its obligations under the contract is result of an event of force Majeure.

ii) For purposes of this clause, “Force Majeure” means an event beyond the control of the

Contractor and not involving the Contractor’s fault or negligence and not foreseeable. Such

events may include, but are not restricted to, acts of the Purchaser either in its sovereign or

contractual capacity, wars or revolutions, fires, floods, epidemics, quarantine restrictions and

freight embargoes.

iii) If a force Majeure situation arises, the Contractor shall promptly notify the Purchaser in

writing of such condition and the cause thereof. Unless otherwise directed by the Purchaser in

writing, tenderer shall continue to perform its obligations under the contract as far as is

reasonably practical, and shall seek all reasonable alternative means for performance not

prevented by the Force Majeure event.

Force Majeure shall mean such an Event or Circumstance or combination of Events and

Circumstances which are beyond the reasonable control of the Affected Party and which the

affected party could not have prevented by Good Industry Practice or by the exercise of

reasonable skills and care for the purpose of discharging its obligations under the Contract.

The Force Majeure will tend to have material adverse effect on the performance of such affected

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 52 -

Following shall be the events and circumstances of Force Majeure:

Act of War (whether declared or undeclared), invasion, armed conflict or act of foreign enemy,

blockade, revolution, riots, insurrection, civil commotion, act of terrorism, or sabotage

The expropriation or Compulsory acquisition or seizure of the assets of The Contractor by any

Governmental Instrumentality, provided that this clause shall not apply where such Act

constitutes a remedy or sanction lawfully exercised as a result of a breach by the Contractor of

any Indian law or Indian Directive but excluding any change in law.

Act of God epidemic, lightning, earthquake, cyclone, whirlwind, flood, tempest, storm,

drought, lack of water or other unusual or extreme adverse weather or environmental

conditions, action of the elements, meteorites, fire or explosion to the extent generated from the

source external to the Contractor or his assets due to reasons other than, those caused by

negligence of the Parties, chemical or radioactive contamination or ionizing radiation.

Procedure for Calling Force Majeure: The affected party shall notify to the other party in

writing of the occurrence of the Force Majeure as soon as reasonably practicable, and in any

event within 24 hours (Twenty Four hours) after the Affected Party knew, or ought reasonably

to have known, of its occurrence and that the Force Majeure would be likely to have a material

impact on the performance of its obligations under the Contract.

The notice shall include full particulars of the nature of Force Majeure event, the effect it is

likely to have on the Affected Party’s performance of its obligations and the measures, which

the Affected Party is taking, or proposes to take, to alleviate the impact of the Force Majeure

Event and restore the performance of its obligations. When the affected Party is able to resume

performance of its obligations under this Contract, it shall promptly give the other party

written notice to that effect provided that in no event shall the suspension of performance be

of greater scope and of longer duration than is necessitated by Force Majeure.

The rights and obligations of the Affected Party shall be suspended to the extent they are

affected by the Force Majeure. AMC shall not be liable to make any payments to the contractor

for it being affected on account of Force Majeure.

AMC reserves the right to terminate the contract if the Force Majeure continues for more than

15 (Fifteen) days at a stretch.

CANCELLATION OF CONTRACT IN FULL OR IN PART

a. If the Contractor at any time makes default in proceeding with the work with

due diligence and continues to do so after notice in writing of fourteen days from the

Dy. Municipal commissioner (Workshop / SWM); or

b. Commits default in complying with any of the terms and conditions of contract

and does not remedy it within fourteen days after a notice in writing is given to him

in that behalf by the Dy. Municipal commissioner (Workshop / SWM);, or

c. Fails to complete the works or items with individual dates completion, on or before

the date(s) of completion and does not complete them within the period specified in

a notice given in writing in that behalf by the Dy.Municipal commissioner (Workshop

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 53 -

d. Shall offer or give or agree to give to any person in MUNICIPAL CORPORATION

service or to any person on his behalf any gift or consideration of any kind as an

inducement or reward for doing or forbearing to do or for having done or forborne to

any other contract for the MUNICIPAL CORPORATION, or

e. Shall obtain a contract with the MUNICIPAL CORPORATION as a

result of ring tendering or other non bonafide methods of competitive tendering;

f. Being an individual or a firm, any partner thereof, shall at any time be adjudged

insolvent or have a receiving order or order for administration of his estate made

against him or shall take

any proceedings for liquidation or composition (other than voluntary liquidation

for the purpose of amalgamation or reconstruction) under any Insolvency Act for

the time being in force or make any conveyance of assignment of his effects or

composition or arrangement for the benefit of his creditors or purport so to do, or

if any application be made under any insolvency Act for the tile being in force for the

sequestration of his estate or if a trust deed be executed by him for his creditors; or

g. Being a company, shall pass a resolution or the court shall make an order for the

liquidation of his affairs, or a receiver or a manager on behalf of the debenture

holders shall be appointed or circumstances shall arise which entitle the court of

debenture holders to appoint a receiver or a Manager, or

h. Shall suffer an execution being levied on his goods and allow it to be continued for

a period of 15 days, or

i. Assigns, transfers, sublets (engagement of labour on a piece work basis or labour with

materials not to be incorporated in the work, shall not be deemed to be subletting) or

attempts to assign, transfer or sublet, the entire works or any portion

thereof without the prior written approval of the Commissioner; the

Commissioner may without prejudice to any other right or remedy which shall have

accrued or shall accrue thereafter to the MUNCIPAL CORPORATION by written

notice cancel the contract as a whole or only such items of work in default from the

The Commissioner shall on such cancellation have powers to;

(a) Take possession of site and any materials, constructional plant, implements, stores,

etc., thereon and/or

(b) Carry out the work by any means at the risk and cost of the contractor. On

cancellationof the contract in full or in part the AMC shall determine what amount, if

any, is recoverable from the contractor for completion of works or in case the works or

part of works is not completed, the loss or damage suffered by the MUNICIPAL

CORPORATION, in determining the amount, credit shall be given to the contractor for

the value of the work executed by him upto the time of cancellation.

Any excess expenditure incurred or to be incurred by the MUNICIPAL

CORPORATION in completing the works or part of theworks or excess loss or

damages suffered or may be suffered by the MUNICIPAL CORPORATION as

aforesaid after allowing such credit shall be recovered from any money due to the

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 54 -

Contractor on any account and if such moneys are not sufficient the Contractorshall be

called upon in writing to pay the same within thirty days. If the Contractor shall fail to

pay the required sum within the aforesaid period of thirty days, the AMC shall have

right to sell any or all of the Contractor’s unused materials, constructional plant,

implements, temporary buildings etc. And apply the proceeds of sale thereof towards

the satisfaction ofany sums due from the Contractor under the contract, and

ifthereafter there be any balance outstanding from the Contractor it shall be recovered

in accordance with provision of the contract.

Any sums in excess of the amounts due to the MUNICIPAL CORPORATION and

unsold materials, constructional plant etc. shall be returned to the Contractor, provided

always that if cost oranticipated cost of completion by the

MUNICIPAL CORPORATION of the works or part of the works is less than the

amount of which the Contractor would have been paid had he completed the works or

part of the works, such benefit shall not accrue to the Contractor.

Without prejudice to the generality of the foregoing, the Contractor shall deposit the

amount, as security deposit shall be absolutely forfeited to the MUNICIPAL

CORPORATION for such failure, or breach or determination of contract.

FORECLOSURE OF CONTRACT IN FULL OR IN PART

If at any time after acceptance of the tender the Commissioner shall decide to abandon

or reduce the scope of the works for any reasons whatsoever and hence not require

the whole or any parts of the works to be carried out, he shall inform the Contractor in

writing to that effect and the Contractor shall have no claim to any payment or

compensation or otherwise whatsoever, on account of any profit or advantage which

he might have derived from the execution of the works in full but which he did

not derive in consequence of the foreclosure of the whole or part of the works.

Provided always that nothing herein contained shall be deemed to render the

Contractor liable for or in respect of or to indemnify the Municipal Corporation against

any compensation or damage causes by the Excepted Risks.

TERMINATION OF CONTRACT

The Contract shall stand terminated at the end of the Contract period unless extended

by the corporation in writing. However, AMC reserves the right to terminate the

contract at any time by giving 1 month (30 days) notice to the contractor.

GENERAL CONDITIONS OF CONTRACT

‐ The vehicles shall be operated & maintained by the successful contractor with

hispersonnel for a period of five years from the date of initial execution of the work,

SEVEN days a week for one shift and if required for two or three shifts. The tenderer

has to quote for one shift of 8 hour, 12 hours and two shifts (i.e. 16 hours) per day as

per price format. It may require operating the vehicle in two or occasionally in three

shifts. If vehicle/s is/are operated for third shift (night shift) shift, additional payment

will be done at the rate of two shifts plus one shift of 8 hours quoted by party &/Or

sanctioned by AMC. The contractor shall employ required supervisor, mechanics,

technicians, one driver cum operator per vehicle. The contractor shall arrange for fuel,

lubricant, tools, spares and all consumables and all other related materials &

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 55 -

expenditures for smooth and uninterrupted working of Nuisance tankers of different

capacities during the period of contract.

‐ The contractor shall have to maintain logbooks / record& shift register, present register

of the staff / has to show certificate for work done. Contractor has to get work done

certificate from the concerned deptt./ officers of AMC where/ under whom vehicle/s

put in use in the vehicle Log diary / certificate & copy of same must be enclosed along

with monthly bill submitted to Central Workshop/concerned deptt ; (as per AMC

instruction) AMC for payment procedure.

‐ For operating contract payment will be made only for those shifts for which work has

been carried out by contractor on the basis of rate quoted &/or sanctioned in tender.

‐ For comprehensive maintenance contract penalty will be imposed on the contractor

for delay work & off road period of the vehicle if it is delayed beyond reasonable time

as mentioned below;

‐ All minor repairing & preventive maintenance work shall be carried out within

Hrs. otherwise penalty will be imposed & will be deducted from the monthly bill of

the contractor for the days for which vehicle remain out of order as mentioned in

‐ All major repairing shall be carried out within 7 days otherwise penalty will be

imposed will be deducted from the monthly bill of the contractor for the days for which

vehicle remain out of order as mentioned in penalty table.

‐ Minor Work Includes: Routine service, Hose replacement, electrical work, external

leakages (oil/water/diesel), mechanical / hydraulic settings, radiator work, general

bodywork, clutch repairing, gear /transmission repairing minor work, filter repair /

replacement, water pump related work etc. These shall be carried out at site or at

AMC’s parking place or as the case may be and allowed by AMC.

Major work Includes: Structural damages, Engine o/h related, Gearbox / clutch related

major work, major electrical work major pump, major body work / chassis (structure)

repairing work, pumpunit work forNuisance tankers of different capacities etc.

‐ If contractor fails to provide the driver cum operator as per the requirement of AMC

penalty will be imposed as mentioned in the penalty table & which will be deducted

from the monthly bill of the contractor. Further in such circumstances AMC is at liberty

to use the vehicle with alternate arrangement & if any damages occur to the vehicle,

same also must be set right by the contractor for which no extra payment / claim will

be reimbursed to the contractor by AMC and this shall be binding on the contractor.

‐ The contractor shall be required to take comprehensive insurance for all the vehicles

during the contract period. It will be the responsibility of the successful tenderer to

have insurance coverage of their operating staff also. They are requested to note that

there will not be any reimbursement inthis regard by AMC. As regards any mishap /

accident happened on the road or at site, the successful tenderer will have to shoulder

the complete responsibility of the same, right from registration of Police complaint,

lodging / follow up of the insurance claim and facing the court trials etc.It shall be the

responsibility of successful tenderer to set right the vehicle without

raising any extra bills / claim against the same to AMC. However, they shall be liable

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 56 -

to receive all the payments (after necessary deduction as per rules) received by AMC

(if issued to AMC by insurance company) against the settlement of insurance claims

from the Insurance Institutions as per rules / they can get reimbursement directly from

the insurance company. AMC authorities shall give the full cooperation to the

successful tenderer by signing the requisite documents necessary for raising the

insurance claim up to settlement of the same.

‐ The work force provided by the contractor shall have to be properly dressed in uniform

and shoes, safety gears for work requirement all the time. Each person provided by the

contractor shall have to display the Identity Card on the uniform, with photo.

‐ Contractor has to arrange for all drivers, Mechanics, labour, etc. & incur their salaries,

wages, etc. as per the prevailing rules and regulations & all liabilities and

responsibilities also lies with him.

‐ The Contractor shall ensure that his personnel report to works everyday at designated

time and continue working throughout the day. The Contractor shall make provision

for presence of requisite manpower during national holidays and festivals etc. as per

AMC requirement. The corporation for working on holidays, national holidays and

festivals will make no separate payments. The Contractor shall ensure presence of his

workforce at the specified time and place.

‐ The Contractor will be solely responsible for any consequences under laws, arising out

of any accident caused by his Vehicles, equipments &/or his employees to the property

or personnel of the corporation &/or third party under this contract.

‐ The corporation shall not be responsible for any claim / compensation that may arise

due to damages / injury / death pilferage to the Contractor’s Vehicles, equipments,

property, staff and any third party or the property, under any circumstances while

providing services under the Contract.

‐ Force Majeure shall mean such an Event or Circumstance or combination of Events and

Circumstances which are beyond the reasonable control of the Affected Party and

which the affected party could not have prevented by Good Industry Practice or by the

exercise of reasonable skills and care for the purpose of discharging its obligations

under the Contract. The Force Majeure will tend to have material adverse effect on the

performance of such affected party.

‐ The Contract shall stand terminated at the end of the Contract period unless extended

by the corporation in writing. In case if A.M.C. found continuous shortcomings in the

services of the contractor, which will be treated as “Deficiency of Service” and AMC in

such event can terminate the Contract with prior notice of 30 days.

‐ The contractor shall obtain all necessary approvals, permits and licenses to operate the

said service. The corporation shall in no way be responsible for the loss occurring to

the contractor on this count.

‐ The commissioner reserves the right to impose additional financial penalty not

exceeding 10% of the monthly bill in a month in case the work is not found up to the

mark, during the routine inspection carried out by the corporation’s staff (if required,

in case of continuous lapses). The decision on amount of penalty within the above limit

is at sole discretion of the Municipal Commissioner and shall be binding on the

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 57 -

contractor. This penalty will be over and above the routine penalties as mentioned

earlier for non‐performance as per the conditions.

‐ The Contractor shall indemnify the corporation and its employees against any

penalties as PRINCIPAL EMPLOYEER, for any failure of the Contractor to honor

various State Laws / Enactments / Contract Labour (R&A) Act 1970 (C) / Minimum

wages Act / Bonus Act / EPF & MP Act etc. and any other law prevailing during the

entire contract period.

‐ The successful Contractor shall have to submit performance security deposit which

shall be 5% of the one year O & M contract work amount based on daily 8 hrs working

shift approved rate as a contract performance security. This guarantee (BG) shall be

renewed timely (every yearly) till expiry of contract. This will be released only after

successful completion of the entire contract period and hand over of the vehicles in

satisfactory working conditions to the Central Workshop, AMC and if there is no due

to be recovered from the contractor for any reason. Further successful tenderer has to

enter in to an Agreement with Amdavad Municipal Corporation as per rules within

days from the date of order.

‐ The operation & maintenance contract rate quoted by tenderer will be fixed for entire

5 years contract period. Only diesel price variation during the contract period will be

considered for which tenderer must have to clearly specify the % loading towards

diesel part in the operation contract without fail, which will be considered for diesel

price variation. Fuel cost increase or decrease will be allowed every quarterly & rate

applicable in the first week of new quarter will be taken in to consideration. Base rate

will be the rate applicable on the date of commencement of work. The formula for

determining the increase or decrease in the rate from the base rate will be as under;

Change in diesel part (E) Rs =A x B ‐1

New Rate of operation contract for quarter = A± E

A = current rate of operation contract

B = % age loading of diesel part in operation contract

C = Rate of diesel in this quarter

D = Rate of diesel in previous quarter

E = Change in diesel part

New rate will be sum of Maintenance contract rate and new rate of operation contract for the

‐ During the contract period, necessary infrastructure like parking / repairing plot/area,

water, drainage, electricity will be provided by AMC. However if any temporary

storage / repairing facility required to be created, same will be carried out by contractor

at their own cost with prior approval of concerned AMC authority. At the end of / as

per the direction of AMC even during the contract period, contractor has to vacate the

place allotted to them & remove the facilities if any created by them without any delay.

‐ The Contractor has to arrange for O & M of vehicles outside of Amdavad city as and

when required by AMC.

‐ Mobile phone and other communication equipments shall have to be provided for each

vehicle and to the supervisors for effective communication. Contractor has to arrange

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 58 -

for 24 hrs. Complain register phone No. For effective communication.

‐ At the end of O & M contract period, tenderer has to hand over the vehicles in

satisfactory working conditions acceptable to Municipal Commissioner &/or his

authorized representative/s of Central workshop deptt. Otherwise penalty will be

imposed by AMC at the discretion of Municipal Commissioner & shall be binding to

the contractor.

‐ All financial arrangement for this work shall be arranged by the Contractor. AMC

shall not be responsible for the financial constraints of the contractor.

‐ Contractor shall provide labor, semi skilled and skilled staff for operating the project

during the period of contract. The salary of staff and all other expenses shall be borne

by the contractor.

‐ Contractor shall have to depute sufficient staff for monitoring / reporting of various

activities related to contract.

‐ The Contractor shall be responsible for any damage occurring to the corporation’s

property and general public, incase the cause is attributed to the cleaners/supervisors.

The contractor shall have to get the same rectified at his own cost and risk, or otherwise,

the corporation at the risk and cost of the contractor shall attend the same to.

‐ The Contractor shall ensure, at all times that his supervisors/cleaners do not misbehave

with the corporationʹs staff or general public while on duty. The personnel found

misbehaving shall be immediately removed from the work at the risk of the contractor.

‐ The corporation shall not be responsible for any injury/death to the any staff of

contractor including drivers, supervisors, cleaners etc deployed by them. It is the

responsibility of the contractor to ensure that his personnel follow the safety

regulations strictly, which is in force from time to time.

‐ The Contractor shall obtain all necessary approvals, permits and licenses to operate the

said service. The corporation shall in no way be responsible for the loss occurring to

the contractor on this count.

‐ Contractor shall take all necessary insurances for the said work and workforce.

Insurance for Third Party Liability arising out of Contractorʹs Vehicle, equipment,

cleaning agents or workforce shall also be taken from the first day of operation.

Corporation shall not be responsible for any losses occurring to the Contractor or third

party on this count.

‐ The commissioner reserves the right to impose financial penalty not exceeding 10% of

the monthly bill over and above the penalty mentioned for various defaults in penalty

clause in a month in case the work is not found up to the mark during the routine

inspection carried out by the Municipal Commissioner or corporation’s staff. The

decision on amount of penalty within the above limit is sole discretion of the

commissioner and shall be binding on the contractor.

‐ The Contractor shall maintain a First Aid Kit and other necessary medicines including

bandages, antiseptic creams/liquid, anti burn cream/powder as required to attend to

any emergency situations.

‐ The Contractor shall indemnify the corporation and its employees against any

penalties as PRINCIPAL EMPLOYEER, for any failure of the Contractor to honors

various State Laws / Enactments / Contract Labor (R&A) Act 1970 (C) / Minimum

wages Act / Bonus Act / EPF & MP Act / any laws affecting such services etc.

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 59 -

‐ The tenderer shall note that MUNICIPAL COMMISSIONER OF AMDAVAD shall not

be responsible for any mishap or accident toworkmen of the contractor or

MUNICIPAL CORPORATION OF AMDAVADʹs employee working at site, while

performing these jobs and no compensation shall be payable by MUNICIPAL

CORPORATION OF AMDAVAD. In case of mishap or accident, the amount of

compensation decided by the concerned authorities will be kept in deposit from

contractor’s bills/ will be paid by contractor. The successful tenderer shall take all the

precautions to avoid any damages to municipal property while working. If any

damage is noticed, the charges for setting right the same will be recovered from their

i) In case the successful bidder fails to deliver the services as stipulated in the tender, the

Commissioner reserves right to get it done from alternate sources at risk, cost and

responsibility of successful bidder.

ii) If it is observed that the Contractor carrying out the work fail to comply with

instructions given by the authorities at the Dy. Municipal Commissioners / Municipal

Commissioner’s level during execution of work thrice, the work will be terminated and

will be carried out at the risk and cost of the contract & penal action will be taken

against them. This decision will not be arbitrable at all.

iii) The above condition will be in addition to the relevant condition in General Conditions

of Contract regarding cancellation of full or part of the work, finality of the decision of

the disputes, differences or claims raised by the contractors relating to any matter

arising out of the contract

The successful Contractor shall have to enter in to an Agreement with Amdavad

Municipal Corporation.

This is subject to the jurisdiction of the competent court of Amdavad only.

Contractor ’s Sign Joint Director (Mechanical)

With seal Central Workshop.

Ahmedabad Municipal Corporation

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 60 -

INFRASTRUCTURE & UTILITIES

The corporation shall provide locations for parking, minor repair and maintaining the Vehicles.

Necessary energy charges, water charges, property tax (if any, when separate plot for regular

parking and repair ‐ maintenance is given to contractor by AMC, based on AMC policy‐

norms ) and other govt. levies etc will be borne by contractor.

All necessary infrastructure shall be developed by contractor at their own cost after permission

from the AMC, zonal SWM Deptt. / other Deptt. for O & M contract work, (when separate plot

for regular parking and repair ‐ maintenance is given to contractor by AMC) and such

infrastructure shall be a removed at the end of contract / as per the direction of AMC even

during the contract period by contractor and contractor has to vacate the place allotted to them

& remove the facilities if any created by them without any delay.

Contractor ’s Sign Joint Director (Mechanical)

With seal Central Workshop.

Ahmedabad Municipal Corporation

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 61 -

QUALIFICATION/ELIGIBILITY CRITERIA

Following are the minimum requirement for Qualifying in the Technical bid of the

A.Only duly registered Firm/Company can submit Bids. Provide Certificate of Registration.

(GST / IT etc.)

B. Registration

The bidder shall have the following registrations and details of the same be provided

in the Technical Bid :

i). PF registration.

ii). Labor Licence / ESIC Registration

C. Manufacturer &/or Supplier of such type of vehicles or its authorized dealer / distributor

or Municipal service provider having experience with any capacity/type can take part in

the tender for which necessary documentary proof should be enclosed with tender. If the

tenderer is Authorized dealer/ Distributor of the manufacturer, a latest Authority letter

should be submitted. If tender is quoted by Municipal service provider work contractor

then he has to submit the details of Nuisance water tanker Vehicle he quote along with

latest agreement for this tender with its Vehicle manufacturer &/or supplier as per tender

requirements to qualify in the tender. However Vehicle manufacturer/ supplier must

possesses requisite quantity and other criteria for Vehicle supply and performance as

mentioned in the experience clause. Necessary documentary proof shall be attached with

D.Certificate from Chartered Accountant about turn over must be attached.

E. Financial Criteria:

a. The Average Annual financial turnover of the tenderer during the last 3 financial years

(2022‐23,2023‐24 and 2024‐25) ending 31/03/25 should be at least 30% of the estimated cost

which is Rs. 933 Lakh (i.e. it shall not be less than Rs. 280 Lakhs) of tender. Separate

Chartered Accountant’s certificate shall be attached.

b. The tendererer / Companies must have Bank solvency certificate of Nationalised /

Schedule Bank / Banks as per AMC Circular amounting to not less 20% of the estimated

cost which is Rs. 933 Lakh (i.e. it shall not be less than Rs. 187 Lakhs). The solvency

certificate issued shall not be older than one year.

If tender is quoted under JV/Consortium/ MOU arrangement , then combine financial &

technical data of JV/Consortium/ MOU/ association members will be considered for

technical bid evaluation.

Experience Criteria Required for Manufacturer / Supplier of vehicles & Service

Provider is as blow :

F. Experience Criteria:

F1. For Manufacturer/Supplier/ Tenderer

Experience Criteria for manufacturer / supplier / tenderer of such or other type of water

tankershall be as below :

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 62 -

He must be having experiencefor supply of such or other type of water tanker in any Municipal

Corporation/ ULBs / Government / govt. undertaking etc. in last 7 years ending 30‐04‐2026 as

below. All necessary documentary evidence shall be submitted along with the tender.

a. Three similar works which should not be less than 40% of amount / quantity (i.e. supply of

6 Vehicle or work amount Rs.121 Lakh ) of the estimated work of this tender

b. Two similar works which should not be less than 50% of amount / quantity (i.e. supply of

7Vehicle or work amount Rs. 152 Lakh) of the estimated work of this tender

c. One similar works which should not be less than 80% of amount / quantity (i.e. supply of

11Vehicle or work amount Rs. 242 Lakh ) of the estimated work of this tender

Similar work means experience for supply of such or other type of water tanker in any

Municipal Corporation/ ULBs / Government / govt. undertaking / semi Govt. etc.

F2: Work Experience Criteria As service Provider

The tenderer should be the service provider of water tankerof any type & / or capacity

either on rental basis by providing their own vehicles&/or under O & M contract basis

work by using department / authorityʹs vehicles& / or under integrated project work by

using such Vehicles. Tenderer must be having at least Two years of continuous experience

for above referred work.Necessary documentary proof shall be attached with the tender.

A detail showing all works of similar types and magnitude or other as mentioned above)

carried out and on hand with the tenderer along with certificate of satisfactory

performance from the institution to whom the Tenderer has provided services should be

also mentioned.

He must be having the Experience of successfully completed similar work/s for at least

two full (Continuous) years during last 7 years ending 30‐04‐2026; it should be either of

the following :

a. Three similar works which should not be less than 40% of work value (i.e. not less than Rs.

252 Lakh in each order) of the estimated work value of this tender

b. Two similar works which should not be less than 50% of work value (i.e. not less than Rs.

315 Lakh in each order) of the estimated work value of this tender

c. One similar works which should not be less than 80% of work value (i.e. not less than Rs.

504 Lakh in each order) of the estimated work value of this tender

Similar work means providing services as service provider of water tanker of any type

& / or capacity either on rental basis by providing their own vehicles&/or under O & M

contract basis work by using department / authorityʹs vehicles& / or under integrated

MSW project work by using such Vehicles for Municipal Solid waste management related

work in any Central govt. organization/ State govt. organization /AMC /Municipal

Corporations or any other Agency of Government of India or any of the State

Governments / ULBs / Govt / Institute / Municipal Authority etc.

G. Further, If tender is quoted by Municipal Service Provider then he has to submit the

details of Nuisance water tanker (as mentioned in PQ for respective tender part) he quote

along with agreement with its Vehiclemanufacturer &/or authorized supplier as per

tender requirements to qualify in the tender. Further Nuisance water tankerVehicles

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 63 -

manufacturer/ supplier must possess requisite quantity and other criteria for

Vehiclesupply and performance as mentioned in the above experience clause For

Manufacturer/Supplier. Necessary documentary proof shall be attached with the tender.

H. The tenderer shall furnish satisfactory performance certificate for Vehicle supply from the

past purchasers for at least total 2customersof Nuisance water (as mentioned in PQ in

tender)for Vehicle supply & its working together with self‐attested copies of purchase

orders received from those client/s.

I.The tenderer shall furnish a satisfactory performance certificate for service providing work

from the past/ current customers for at least One work with details & itʹs working

together with self‐attested copies of order/s received from those client/s.

J.All related duly self attested documents like work order, performance certificates, RTO

Registration Book etc. shall be submitted with the tender. The tenderer shall furnish

satisfactory performance certificate for the work executed by him. Necessary

documentary proof shall be attached with the tender.

K. The tenderer shall furnish the list of Municipal corporations /ULBs /Institutions etc. with

Address & Tel. no. to whom equipments have been supplied during the preceding five

years and the numbers of equipments/vehicles such supplied.

L. If participants are Joint Venture / Consortium /MoU / association etc. then they should

fulfil following conditions:

If the supplier is a Joint Venture / Consortium /MoU / association etc, all of the parties

shall be jointly and severally liable to the Purchaser for the fulfilment of the provisions of

the contract and shall designate one party to act as a leader (Technical member either

manufacturer &/or supplier &/or service provider) with authority to bind the Joint

Venture / Consortium /MoU / association etc. The composition or the constitution of the

Joint Venture / Consortium /MoU / association etc. shall not be altered without the prior

consent of the Purchaser. Maximum two parties are allowed for such joint venture,

consortium, or association.

Joint Venture / Consortium /MoU / association etc is permitted maximum up to 2 (two)

members; Tie up details of Joint Venture / Consortium /MoU / association etc. members

shall be submitted with documentary evidence along with tender.

All the members of the Joint Venture / Consortium /MoU / association firms etc all shall

have to collectively satisfy all the criteria mentioned.

In case, the applicant Joint Venture / Consortium /MoU / association partner has achieved

experiance& financial criteria mentioned above in past,in Joint Venture / Consortium

/MoU / association with other contractor (other then present Joint Venture / Consortium

/MoU / association partner), the portion of the work (experiance and finance) of the

contractor included in their Joint Venture / Consortium /MoU / association Agreement in

original contract work shall only be considered for evaluation purpose.

Joint Venture / Consortium /MoU / association etc shall comply with the following

minimum requirements:

a. The Joint Venture / Consortium /MoU / association etc shall be between maximum of

members including the prime bidder or the leader (Technical member) of the Joint

Venture / Consortium /MoU / association etc.

b. The Joint Venture / Consortium /MoU / association etc as a part of the Joint Venture /

Consortium /MoU / association etc agreement shall declare and nominate the leader of

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 64 -

Joint Venture / Consortium /MoU / association etc who will be deemed to be prime

c. The Joint Venture / Consortium /MoU / association etc agreement shall clearly and

unambiguously specify the roles, duties and responsibilities and stake of each of the Joint

Venture / Consortium /MoU / association etc. members including binding of parties for

execution of the project and till 5 years / expiry of the contract period whichever is later.

d. The Joint Venture / Consortium /MoU / association etc. agreement shall be notarized and

the agreement shall be attached with the qualification bid (technical) and shall not be

modified and amended without prior approval of the Ahmedabad Municipal Corporation

during the entire period of contract performance.

M. Disqualification

Disqualification Even though the Applicants meet the above criteria, they are subject to

be disqualified if Applicant or any of its constituent partners have: ‐ Made misleading or

false representation in the forms, statements, and attachments submitted; or ‐ Been

debarred or terminated or blacklisted (and effect is continue on due date of this tender)

by Central Govt. organization / State Govt. organization / AMC / Any Municipal

Corporation / ULBs

In case of a proprietary firm, partnership, private ltd, limited firm the following are the

disqualification in case of failure to disclose information by partners or the proprietor:

(i) If, any of the directors, partners or the proprietor is debarred / blacklisted by Central

govt. organization / State Govt. organization / ULB / Any Municipal Corporation /

AMC or any other Agency of Government of India or any of the State Government.

(ii) If, any of the directors, partners or the proprietor has a criminal history or has been

convicted by any court of law for any of the offenses under any Indian laws.

(iii) If, any criminal proceeding is pending in any court of law in India against any of the

directors, partners or a proprietor and if any such proceeding culminates into

(iv) If, any criminal proceeding is pending in any court of law in India against any of the

directors, partners or a proprietor and if any such proceeding culminates into

However; merits of such actions will be reviewed by Municipal Commissioner; AMC

(If need be) and can take decision accordingly after review, which will be final &

binding to all tenderer.

Note: The experience as sub contractor shall not be considered.

Contractor ’s Sign Joint Director (Mechanical)

With seal Central Workshop.

Ahmedabad Municipal Corporation

Tender No_ 12 _ SITC with O & M for Different types of Nusiance Tanker _ 2026-27 - 65 -

D e tai ls o f T e nd er e r

Submit details of all members of Joint Venture / Consortium /MoU / associationpartners)

1. (a) Name of firm :

(b) Address of the office(s)

(c) Date of incorporation and/or commencement of business

Details of Service Provider

(a) Name of firm :

(b) Address of the office(s)

(c) Date of incorporation and/or commencement of business

2. Brief description of the Supplier’s main lines of business.

Brief description of the Service Provider’s main lines of business.

3. Details of individual(s) who will serve as the point of contact / communication for AMC

with the Tenderer /contractor:

(b) Designation:

(c) Company/Firm:

(e) Telephone number:

(f) E‐mail address:

(g) Fax number:

(h) Mobile number:

4. Name, Designation, Address and Phone Numbers of Authorized Signatory of the bidder

(b) Designation: