Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹10.9 LAccepted-AOC PSRA 146 A PULIMOOTTIL ROAD PADAMUGAL INDRA JUNCTION KAKKANAD PO KOCHI 682030 | KOCHI | ERNAKULAM | KERALA | 682030 | L1 | Accepted-AOC L1 | |
| 2 | L2₹12.8 L+₹1.8 L (16.5%)Rejected-AOC CHEMBISSERY PUTHIYAKAVU TRIPUNITHURA P O KOCHI 682301 | ERNAKULAM | KERALA | 682301 | L2 | Rejected-AOC L2 | |
| 3 | L3₹13.9 L+₹2.9 L (26.3%)Rejected-AOC 40 608A PULLOMPARAMBLI HOUSE MANDAKKARA ROAD KOCHI 682 018 | KOCHI | ERNAKULAM | KERALA | 682018 | L3 | Rejected-AOC L3 | |
| 4 | L4₹15.6 L+₹4.6 L (41.7%)Rejected-AOC | L4 | Rejected-AOC L4 |
Tender Value
₹17 L
EMD Value
₹34,000
Closing Date
10 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NS KOCHI
Military Engineer Services Garrison Engineer (Naval Services) Kataribagh, Naval Base Post
PROVISION OF CERTAIN E AND M SANCTIONED WORKS AT NAVAL BASE KOCHI
2022_MES_552040_1
8962/E8
Open Tender
Electrical and Maintenance Works
Item Rate
120 days
Kochi
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE NS KOCHI
₹34,000
Yes
13 Dec 2022
15 Sept 2022
12 Oct 2022
15 Sept 2022
10 Oct 2022
27 Sept 2022
15 Sept 2022 - 26 Sept 2022
60 days
Amount
Excavation in trenches not exceeding 1.5 Metre in depth and not exceeding 1.5 Metre in width in soft/loose soil for foundation/pole/manhole/pier hole/cess pit/shaft/well and laying underground cable complete all as specified and directed.
Returning, filling including spreading leveling watering and well ramming in layers not exceeding 25 cm thick complete all as specified.
Removing excavated material (soil) to a distance not exceeding 50 Metre and depositing where directed at a level not exceeding 1.5 metre from the starting point complete all as specified.
Supply and spread River Sand for cushioning and covering of UG cables in trenches complete all specified and directed. (Note : For measurement purpose only punned thickness shall be measured and paid)
Supply and laying un-reinforced precast concrete cable cover class LV type-I flat size 250mm x 150mm x 40mm complete all specified and directed.
Supply and Lay UG cable in trenches/passing through pipes/fixed on walls or poles cable XLPE insulated, screened, PVC bedded, steel strip or wire armoured electric power cables (Heavy duty) 1100 Volts grade with stranded aluminium conductor of size 3.5 core 95 sqmm with suitable cable gland including taking down of unserviceable Cable complete all as specified and directed.
Ditto all as per Serial Item No 6, but Cable of size 3.5 core 50 Sqmm
Ditto all as per Serial Item No 6, but Cable of size 3.5 core 35 Sqmm
Ditto all as per Serial Item No 6, but Cable of size 4 core 25 Sqmm
Ditto all as per Serial Item No 6, but Cable of size 4 core 10 Sqmm
Ditto all as per Serial Item No 6, but Cable of size 2 core 10 Sqmm
Supply & install, testing and commissioning in replacement of outdoor type floor mounted LT panel suitable for 415 volts, 3 Phase 4 wire, 50 Hz AC supply system conforming to IS : 8623/93, floor mounted, factory made, weather and vermin proof, fully ventilated and fabricated out of angle iron 40mm X 40mm X 6mm thick frame work and CRCA sheet 2 mm thick having Aluminum bus bar of rating 315 Amps, three phase and one neutral fixed on insulator and bus bar insulated by coloured heat shrinkable sleeves. The size of the outer shell should not less than 750mm X 500mmX 500mm, mounted on angle iron stand made out of size 40mm X 40mm X 6mm grouted of digital volt meter & Amps meter with CTs including taking down of old existing panel complete all as specified and directed:- (a) Bus bar chamber of 3 phase and 1 neutral 4 strip 415 volts with 315 Amps aluminium strip - 1 Set (b) MCCB 200 Amp 35 KA 4 pole - 01 No ( Incoming) (c) MCCB 63 Amp 25 KA 4 pole - 01 No (Outgoing) (d) Volt meter digital 0-500 volt - 01 Nos (e) Amp meter digital 0-300 Amp - 01 Nos (f) Indicator lamp Yellow, Red, Blue - 01 Set
Materials and labour for Earthing complete with galvanised iron earth plate electrode 600 x 600 x 6 mm thick, buried directly and preferably vertically in ground , earth pit not less than 2.25 metre deep below ground level with top edge of the plate not less than 1.5 metre below ground level connected with galavanised wire of 4 mm by means of nuts, bolts, check nuts and washers made of galvanised iron or steel ,wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6)type C-1 (with 20 mm grade aggregate), 50mm thick precast RCC (1:2:4) cover slab (reinforced with 8mm dia TMT bar @ 15 cm Centre to centre both ways and suitable handle made of 10mm dia) including necessary earth work in excavation, returning filling and removal of surplus earth up to a distance not exceeding 50 m etc all as shown on electric plate No.5 of MES Schedule Part-I (2009) complete including testing on completion all as specified and as directed by the Engineer In Charge.
Supply and fixing GI pipe medium grade with necessary fittings in trenches /fixed on wall of size 50 mm dia including taking down old unserviceable one complete all as specified
Supply, installation, testing and commissioning of two cylinder reciprocating Air Compressor of capacity 14.5 CFM, Maximum pressure 12 Kg/Sqcm ,including three phase 5 HP electric motor with starter including suitable size of copper wire to be connected to existing MCBs, with tank capacity 220 Litres, necessary connection in existing CPVC air line with required valve and pipes etc for arrangement of one compressor as standby and necessary PCC foundation with bolt & nuts as per manufacturer recommendation complete all as specified and directed.
Cutting existing road/hardstand of any type by using crow bar chisel etc not exceeding 45 cm wide and not exceeding 1.5 metre depth for laying GI pipe including making good the surface by returning filling watering ramming in layers 150 mm thick PCC 1:2:4 over 200 mm thick hard core of broken bricks/stones over returning filling watering ramming in layers not exceeding 25 cm thick complete all as specified and directed by Engineer-in-Charge. Note: (GI pipe will be measured and paid separately)
Supply and fix MCB SPN 32 Amps rating 240V, 10KA 'C' curve along with sheet metal enclosure for suitable size and connection testing including necessary fitting arrangement complete all as specified and directed.
Material & Labour for Brick well burnt Class 'B' as in cover to UG cable, laid dry, flat over the cable with width equal to length of the cable and abutting each other with gap between adjacent slab not exceeding 10mm over UG cable for cable protection in trenches complete all as specified.
Supply and fixing GI pipe light grade with necessary fittings in floor/pillar /fixed on pole of size 40 mm dia complete all as specified
Supply & laying of 50 mm outer dia CPVC pipes SDR-13.5 & plain CPVC SDR 11 fittings and jointed with yellow solvents cement including taking down old unserviceable GI Tubing, laid in trenches, complete all as specified and directed.
Ditto all as per Serial Item No 20, but CPVC pipes of 25 mm outer dia.
Supply & fix rotational moulded polythene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position of capacity 1000 litres including making holes for inlet and outlet pipe with proper sealing by check nut and washer complete all as specified and as directed.
Supply & Fix brass valve (float valve) with polythene float and fly nut high pressure of PTMT with epoxy coated aluminum rod and high density plastic ball of size 25 mm screwed for CPVC pipe and fixed (minimum weight 25mm-455 gms) after reducing 40 mm pipe to 25 mm including all other fittings required at site.
Supply and fix CPVC ball valve of size 40 mm dia suitable for CPVC pipe including necessary fittings complete all as specified and directed.
Ditto all as per Serial Item No 24, but CPVC ball valve of size 25 mm dia.
Material and labour for point wiring with 4 sqmm PVC insulated sheathed single core multistranded copper conductor cable, FRLS, ISI marked drawn through and including PVC conduit of suitable size and all accessories, not less than 2mm thick, fire resistant, ISI marked including 2 mm thick and 4cm depth GI sheet pressed terminal box (recessed) with 3 mm thick laminated hylem sheet top cover including 4 Sqmm PVC insulated sheathed multistranded single core copper conductor FRLS, ISI marked cable as earth continuity conductor and making good the disturbed surfaces of walls, floors, ceiling etc to match with existing surface, complete all as specified and directed for 3 pin socket outlet 15 amps for Mono block pump set.
Supply and fix isolator SPN of 40 amps, 240 V complete all as specified and directed
Supply and fixing of Mono block pump set suitable for 230 V SPN system having capacity of 1 HP, head range of 6-48 metres and discharge range of 4280-700 LPH including starter wiring conduit etc, having 25 x 25 mm cross section including PCC staging complete all as specified and directed.
Material and labour for plain cement concrete (1:4:8) type D2 using 40mm graded stone aggregate as in foundations filling and mass concrete complete all as specified and as directed.
Material and labour for plain cement concrete (1:2:4) type B1 using 20mm graded stone aggregate as in sub structure complete all as specified and as directed.
Material and labour for rendering 10 mm thick on fair faces wall of brick work in Cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed
Material and labour for precast cement concrete solid block type B1 (1:2:4) using 20mm graded stone aggregate exceeding 10 cm in width and setting in cement mortar 1:6 complete all as specified and as directed
Amount of Credit Schedule shall be deducted to arrive the Contract Sum.
M/s.Rejoy Constructions
WELTRONENGINEERINGSERVICES
V V BHARATH ENTERPRISES
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .