Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.3 LAccepted-AOC POST BINNAGURI DIST JALPAIGURI W B PIN 735 203 | JALPAIGURI | WEST BENGAL | 735203 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹32.3 L+₹1.3 L (4.09%)Rejected-Finance 24B JYOTISH ROY ROAD KOLKATA 700053 | KOLKATA | WEST BENGAL | 700053 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹32.9 L+₹1.9 L (6.09%)Rejected-Finance NIL | THE NILGIRIS | TAMIL NADU | 638451 | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹33.5 L+₹2.4 L (7.80%)Rejected-Finance | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | L5₹34.9 L+₹3.8 L (12.4%)Rejected-Finance TELEPARA HATKHOLA PO BINNAGURI 735203 DISTT JALPAIGURI W B | JALPAIGURI | WEST BENGAL | 735203 | L5 | Rejected-Finance OTHER THAN LOWEST BIDDER |
Tender Value
₹43.5 L
EMD Value
₹88,000
Closing Date
7 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) BINNAGURI
GE (SOUTH) BINNAGURI, PO - BINNAGURI, DISTT - JALPAIGURI, PIN - 735232
SPL REPAIR OF PUMP HOUSE AT BINNAGURI MIL STN AND CERTAIN PROVISION WORKS AT TELEPARA MIL STN UNDER GE (S) BINNAGURI
2023_MES_617940_1
8597/E8
Open Tender
Civil Works
Item Rate
180 days
GE (SOUTH) BINNAGURI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (SOUTH) BINNAGURI
₹88,000
Yes
8 Nov 2023
9 Sept 2023
10 Oct 2023
9 Sept 2023
7 Oct 2023
25 Sept 2023
Amount
S&F seccond class hardwood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain,chamfered or rounded.fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified
M & L preparation of new surface & applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces exc 10 cm girth.
Suply and fixed stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete
S&F 125 mm long Aluminium, anodised barel tower bolt of extruded section and fixed complete all as specified and as directed by Engr-in-Charge.
S&F 150 mm long Aluminium, anodised handles of fabricated type complete all as specified and as directed by Engr-in-Charge.
S/F Butt hinges 100 mm size medium weight cold rolled mild steel and fixed complete all as specified and as directed by Engr-in-Charge.
S&F Framed work as in doors or gates of angle or other section conforming to Fe-410W (Gde-E-250) quality-A with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hook and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified & directed.
S&F 300mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed
300mm, ordinary rat tail rod pattern spring ncluding roller and plate complete all as spec ified
Taking down of cement plaster on brick (or) concrete wall including racking out joints hakins for key sinebling down with water etc complete all as specified and directed.
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement morter 1:6 finished even and smooth without using extra cement complete all as specified and as directed.
M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement morter 1:4 with water proofing compound finished even and fair complete all as specified and as directed.(Note : WPC shall be measured and paid separetely)
M&L rendering 5mm thick in CM (1:3) on fair faces of concrete surfaces as in celling finished fair and even without using extra cement complete all as specified and as directed.
Materials and labour for applying two coats weather coat after preparation of new plastered surfaces of walls ,cornices,soffits and similarcomplete all as specified and directed by the Engr-in-Charge
M&L preparation of new plaster surface and applying three coats of white wash on ceiling.
Preparation of old treated surfaces of ceiling all as directed and applying two coat of white washing complete all as specified and directed.
M&L for preparation of old surface by wire brushing brooming, dusting & finally washing with water to clear the cracks absolutely free from any kind of existing finishes & foreign materials, and applying one coats of exterior emulsion paint (Apex ultima/Weather coat/Weather shield) white or tinted as approved complete all as specified and directed.
M&L for preparing old plastered surfaces of wall and applying two coat of distemper oil emulsion over a coat of primer complete all as specified.
Removing and Hacking of existing deteriorated damaged & loose concrete from the external surface of the structure carefully by low impact high frequency hammer or by manual chipping without damaging the existing concrete or control sand blasting including cleaning the surfaces by air jet etc, complete and also without damaging the existing structure.The rate shall also include disposal of waste/rubble/malwa from site outside MD Land upto as directed by the Engr-in-Charge along with lead and lift if any including standard steel scaffolding upto a height of 11 M. Note : The above treatment will be done in presence of company authorised person and also company skilled workers.
M & L for Removing the loose scale of corrosion etc from the exposed reinforcement and cleaning the corroded reinforcement by wire brush followed by cleaning with air blower/water jet. Finally cleaning the rusted reinforcement by chemical rust remover,cleaning and etching agent as per technical specification and as per manufacturer's recommendation and also as per the direction of Engr-in-Charge .The rate inclusive of labours,materials,tools etc, complete including standard steel scaffolding upto a height of 11 M Note : The above treatment will be done in presence of company authorised person and also company skilled workers. Make of rust removing agent :- Reebaklens RR from FOSROC or Equivalent
M & L for surface cleaning and application of Two coats of Two component epoxy zinc rich primer coat on steel surfaces / reinforcement as per manufacturer's recommendation and as per technical specification and also as per the direction of Engr-in-Charge, complete including standard steel scaffolding upto a height of 11 M Note : The above treatment will be done in presence of company authorised person and also comapany skilled workers. Make of Two component epoxy zinc rich primer : Nitozinc Primer from FOSROC and Friazinc R of Make Sika or Equivalent
M & L for providing and applying Structural grade long pot life, Two component Epoxy resin concrete bonding agent prior to building up of secion with any type of mortar / concrete to ensure bond between old concrete and new concrete by brush application as per manufacturers instructions and also as per technical specifications and also as directed by Engineer-in-Charge at site. Note : The above treatment will be done in presence of company authorised person and also company skilled workers. Make of Two component Epoxy resin concrete bonding agent : Nitibond EP from FOSROC or Equivalent.
M&L for 25 mm thick ( Average thickness) Guniting concrete surface using single component, shrinkage controlled, polymer modified, fibre reinforced structural grade cementitious repair mortar having compressive strength of 45 N/ Sq.mm , Flexural strength of 7 N/Sq.mm and tensile strength of 2.50 N/sq.mm at 28 Days all as per manufacturer's recommendation and technical specification and as per the direction of Engr-in-Charge including standard steel scaffolding upto a height of 11 M Note : The above treatment will be done in presence of company authorised person and also company skilled workers. Make of single component, shrinkage controlled, polymer modified, fibre reinforced structural grade cementitious repair mortar : Renderoc SP 40 from FOSROC or Equivalent.
Demolition of cement concrete (un reinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level)
M&L for 25 mm thick cement concrete type B0, 1:2:4 (12.5mm graded aggregate) as in floor etc and finishing cement concrete complete all as specified and directed.
M&L for cement concrete type C-2, 1:3:6 (40mm graded aggregate) 75mm thick as in plinth protection, pavement etc and finished the surface even and fair complete all as specified and directed.
Demolition of brickwork or stone/boulder masonry, built in cement mortar.
M&L for fly ash brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in cement mortar 1:6.
M&L for brick work with sub class 'B' bricks straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4
Dismantling floor hearth or wall tiling and interlocking incl cement mortar bedding or sand and removing the rubbish off the premises complete all as specified and as directed by Engr-in-Charge.
M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes
M& L for Glazed coloured ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with 10 mm screed bed 1:4 for laying wall finishes complete all as specified and as directed.
S&F framed work such as grills,gratings,etc with ends of bars, shouldered and / or riveted.or forged into spikes,framed guard bars barred iron doors ladders.framed balusters walk ways railings framework of watertanks and similar.
Taking down chowkat or frame with door shutter (without taking off shutter from the frame) exc. 1.5 sqm and n.exc 4 sqm each, making good disturbed surfaces and removing materials from site of work complete all as directed by the Engr-in-Charge.
M & L pressed steel door frame of size 125mm x 60mm with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete as specified.
M & L pressed steel door frame of size 105mm x 60mm with one or more rebates including necessary fixing lugs , hinges, lock strike plate etc complete as specified.
M&L for cement concrete Type B1 1:2:4 (20mm graded aggregate) as in roof kerbs or mud stops, rounded or chamfered on edges.
S&F 30mm thick factory made flush shutter, solid core construction with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F 35mm thick 2nd class hard wood glazed and skeleton factory made shutter open rebated and prepared to receive glass, gause etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers edges of framing plain chamferred or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR part-I, Sec-08, Clause 8.20(a), kiln seasoned and chemically pressure treated complete all as specified and as directed.
S&F Aluminium anodized barrel tower bolts, extruded section 200mm long.
S&F Aluminium anodized handles, D type, 150mm long.
Supply & fixing in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless and as required framing including taking old one steel staples all as directed by the Engr-in-Charge.
Taking up or down steel tubing and connections,15mm bore including cleaning for serviceable pipe for re-fixing or removal of unserviceable pipe from site of work complete all as directed.
All as per item No.43 above but 20mm bore.
S&F tubing,medium grade,15mm bore with all fittings fixed to walls and ceiling or laid in floors including testing complete all as specified and directed.
All as item No 45 herein before but 20mm bore.
S&F in repair bib taps, fancy type chromium plated with crutch or butterfly hadle screwed down ,screwed for iron pipe or brass ferule of 15mm bore complete all as specified and as directed.
S&F in repair stop valve,fancy type chromium plated (medium) screwed down,high pressure with crutch or butterfly handle,screwed both end for ironb pipe or for union of 15mm bore complete all as specified and directed.
S&F in repairs 15mm pillar tap,cast copper alloy, with capstan head, chromium plated, fancy type screwed down high pressure,with or without lettered "hot" or "cold" with long screwed shank and fly nuts screwed for iron pipe of 15mm bore complete all as specified and as directed.
S&F in repair PVC flushing cistern syphonic action type,10 ltrs capacity,low level white with inlet ball valve,float and handle including bracket including flush pipe complete.
S&F in repair 15mm bore PVC connection pipe 450mm long with PTMT nuts at bolt ends.
S&F in repair CP towel rail, 20mm dia,600mm long including brass CP brackets. complete.
S&F in replacement rotational moulded PVC water storage tank 1000ltrs capacity conforming to IS-12701(1989) cylindrical vertical type multi-layered with closed top including inlet,outlet and wash out holes of approved make hoisted and fixed in position all as specified in SSR Part I
S&F 25mm ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 455 gms)
S&F in reair of Soap dish, vitreous china white, approximat size 160X160X90mm.complete all as specified and as directed.
M&L in repair for 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors
Ditto as above but in wall complete all as specified.
M&L for 110 mm bore PVC (SWR) vent cowl
M&L PVC (SWR) bends with access door of 110mm bore any radius complete all as specified.
S&F in repairs vitreous china wash down water closet pan (Eeuropean type), white including white plastic seat cover with mild steel CP hinging device,suitable brass CP wash jet flush pipe fixed complete jointing connecting and making good the disturbed.
S&F in repairs vitreous china wash basin 550 x 400mm size white including brackets,CP waste coupling waste pipe,short connection complete all as specified and directed.
S&F in reair of corner shelf, vitreous china white,complete all as specified and as directed.
S&F waste coupling of PTMT (half of full threaded) complete all as specified and as directed by Engr-in-Charge.
S&F 32 bore Wash hand basin waste pipe complete all as specified and as directed by Engr-in-Charge.
Taking down chowkets or frame with shutter (without taking off shutters from the frame) n.exe 1.5 sqm each.
S/F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tube for top & bottom rails MS frame shall be covered with heat mould plain coloured PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement Make : Rajshree or equivalent as approved by GE.
S/F solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, Make : Rajshree or equivalent as approved
S&F Stainless steel butt hinges medium weight 100mm long for PVC door.
S&F in repairs factory made Z section steel ventilator with top hung shutter incl hinges, steel peg stay, with glazing bars including a shop coat Red Oxide priming including taking out old one , complete all as specified and directed.
Supply and fix 4mm thick sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.50sqm in each pane complete all as directed.
Demolition of existing roof treatment complete of any description and in taking down existing tarfelt including tiles, lime concrete and screed bed complete from surface including parapets and lowering and removing the same to a distance exc. 1500 mtr and not exc. 2000 mtr including roughening of old concrete surface of roof, cleaning the surface by wire brushing to remove all loose dust etc complete all as specified and directed.
M&L for 10mm thick screed bed or bedding layers in cement mortar (1:4) using water proofing liquid compound @200 ml/bag of cement in order to maintain proper slope over existing roof surface finished even and smooth without using extra cement for receiving treatment complete all as specified and directed.
M&L for waterproofing coating with polyurethane-based water proofing liquid membrane to be applied by brush with multi coats with minimum dry film thickness of 1mm and shall be cured by reaction with atmospheric moisture to give a tough elastomeric waterproof membrane complete all as specified and as directed. Note:The above treatment will be carried out by authorised applicator of approved firm/ company.
Dismantling wrought iron or mild steel work of any description as in door, gates etc and similar works complete all as directed by the Engr-in-Charge.
S&F in repairs factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete with glazing bars , dovetailed or welded including a shop coat Red Oxide priming complete including taking out old one all as specified and directed.
S&F in repairs factory made Z section steel window with side hung shutter frame including projecting/ box type hinge with steel handle and steel peg stay, ms tower bolt etc. complete without glazing bars , dovetailed or welded including a shop coat Red Oxide priming including taking out old one complete all as specified and directed.
M & L preparation of new surface & applying two coats of synthetic enamel paint over a coat of pink primer to wooden surfaces exc 10 cm girth all as specified and directed..
S& F of 0.63mm Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required covering to door shut ters; covering to door chowkats (frames); chullah hoods; water tanks; water troughs; ducts; urinal troughs and funnels, etc. cut to size edges beaded if directed, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel members, etc., with plain 40 mm lap joints or welded/ riveted seams including bending, turning up, mitred angles, stopped ends, outlets, etc. as required complete all as specified and as dircted.
Demolition of stome slab and tiles of any desc or thickness in floor or apron etc laid bedded in cement morter
M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with M & L for screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes
M & L for Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with ditto as per item 20
S & F in repairs steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod,hasp and staple and one shop coat of primer,erected in position as indicated, complete: push pull or manual type complete all as specified & directed.
M&L for fine aggregate (sand) spreading and levelling in layer n exc 50mm thick under paver block for cushioning complete.
M&L for chemically treated machine pressed precast concrete coloured interlocking paver block with Grey cement and no pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade.
M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded stone aggregate ) as in surface channels and drains etc complete all as specified and directed.
Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed.
Add or deduct for each 25mm girth or part thereof over or under 30cm ---------------- Ditto -----------.
M&L for machine pressed ,pre-polished and chemically treated, smooth finished ,exterior graded coloured cement concrete Chequered tiles 30cm x 30cm x 22-25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 15mm thick
Excavation in trenches n. exc 1.50 m wide and n. exc 1.50 m in deep for foundation or for main hole etc n. exc 10 sqm on plan and getting out in soft/loose soil all as specified and directed.
Returning filling including spreading levelling watering and well ramming in layers n. exc 25 cm in soft /loose soil complete all as specified and directed.
Removing excavated material ( soil) n. exc 50 m depositing where directed at a level n. exc 1.50 m above the starting point all as specified and directed.
Dismantling and breaking up 200 mm drain pipe (salt glazed stone ware or reinforced concrete) set in cement mortar alongwith concrete bed of drain pipes as in damaged portion of sewage line and work in foul position complete all as specified and as directed.
M&L for PCC for concrete bed to drain pipe , 200 mm bore pipe including packing and under hunching against the sides of pipe after they are laid and tested in PCC (1:3:6) type C-2 using 40 mm graded stone aggreagate complete all as specified and directed.
M&L for 200 mm bore grade 'A' SGSW drain pipe laidin trenches and jointed in cement ,mortar (1:1) complete all as specified.
M&L for PCC (1:4:8) type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
Supply only water proofing compound of approved make. (ISI)
Dismantling post or strut any section including taking out embedded portion and making good disturbed ground post embedded natural ground
Ditto but post embedded in concrete brick and masonry ground etc
Dismantling fencing wire mesh, any type
S&F in repair galvanised 2 strand steel barbed wire 2.254 mm dia barbed with 2 mm barbed at 75 mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or lying at corssling with and provision of galvanised mild steel wire staples or steel pins etc all as specified and as directed (Note : Each line of wire to be measured)
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removal excess soil to at a distance 50 m and making good surface(soft or loose soil)
M&L for RCC M25 (design mix), using 20 mm graded aggregate in columns, pillars, piers, posts and struts complete all as specified & directed
M& L for Cement concrete in foundations, filling and mass concrete type c-2 1:3:6 using 40 mm graded aggegrate as in pcc band at ground level to hold the bottom of post etc
S&F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips.
All as per item No.104 herein before but 5mm dia and over and including 10mm dia in stirrups, spacers and binders.
As per item no 104 bove but 6mm dia round bar as in nibs complete all as specified
M&L for formwork to sides of concrete foundations, footings, bases of columns raft and raft beams sides and soffit of foundation and plinth beam and similar work similar or batte for rough finished surfaces of concrete in flat.
M&L for formwork to sides of pillars, posts, struts, piers, columns and stanchions, finised rough, square, rectangular section.
M&L in repair for flat iron in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc flat iron fillets including all necessary drilling, bolting or revetting etc and similar work conforming to Fe-290 Gde E-165.
Supply only Chain link MS galvanised fencing any size or type exc 1.9 Kg per square metre as approved by Engineer-in-Charge.
Fixing only Chain link fencing including line wires, any mesh size and type to any type of standards rails straining bolts etc including provision of binding wireany size or type weight exc 4 Kg per square metre as approved by Engineer-in-Charge. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
M/S SINHA ENTERPRISE
SG ENTERPRISE
SHIVAAY CONSTRUCTIONS
M/S MAJUMDER CONSTRUCTION
M/S RATNESH KUMAR SINGH
R K AGARWAL
L. B. SHARMA
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .