Loading
Loading…
Loading…
Tender Value
₹72.2 L
EMD Value
₹1.4 L
Closing Date
18 Mar 2026, 3:00 pmClosed
No
No
Single Packet System
Normal Tender
No
Not Applicable
Lowest to Highest
60 days
Expenditure
Capital (Works)
Above/Below/Par
MAINTAINCE
15 conditions · 4 needing a document upload
The tenderer must have minimum average annual contractual turnover of V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees N = Number of years prescribed for completion of work for which bids have been invited. The average annual contractual turnover shall be calculated as an average of "total contractual payments" in the previous three financial years, as per the audited balance sheet. However, in case balance sheet of the previous year is yet to be prepared/audited, the audited balance sheet of the fourth previous year shall be considered for calculating average annual contractual turnover. The tenderers shall submit requisite information as per Annexure-VIB, along with copies of Audited Balance Sheets duly certified by the Chartered Accountant/Certificate from Chartered Accountant duly supported by Audited Balance Sheet.
The firm/contractor should submit a valid "B" grade or above electrical Contractor license issued by the Government Electrical Licensing Board in favor of the Firm/contractor (OR) the site Supervisor should possess the necessary valid "B" grade or above electrical Contractor license issued by Government Electrical Licensing. A copy of the valid license shall be submitted with the offer. The offer without a copy of a valid "B" grade or above Electrical Contractors license shall be summarily rejected.
Similar Nature of Work: "Works of wiring / cabling or installation and Commissioning of electrical Items (Other than on coaches) such as lights, fans, pumps, charging arrangements, earthing etc (with or without supply of items / equipment's) For 230V, 1 Phase or 415V, 3 Phase System or higher voltages."
47 conditions · 7 needing a document upload
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc. and corresponding documents shall be submitted by the tenderer as per the composition of the Firm.
The Bid Security shall be deposited either in cash through e- payment gateway or submitted as Bank Guarantee bond from a scheduled commercial bank of India or as mentioned in tender documents. The Bank Guarantee bond shall be as per Annexure- VIA of GCC and shall be valid for a period of 90 days beyond the bid validity period. Non submission of scanned copy of Bank Guarantee with the bid on e-tendering portal (IREPS) and/or non submission of original Bank Guarantee within the specified period shall lead to summary rejection of bid. The original Bank Guarantee should be delivered in person to the official nominated as indicated in the tender document within 5 working days of deadline of submission of bids.
Eligibility criteria :- Eligibility criteria shall be mandatorily incumbent upon the tenderer to identify, state and submit the supporting documents duly self attested/digitally signed by which they/he is qualifying the Qualifying Criteria mentioned in the Tender Document.
Tender Form (First sheet, Second sheet) of The GCC April 2022.
Certificate format (Affadivit) which available as Annexure - V in Mandatory documents. A facility has already created for online submission of Annexure V of GCC in IREPS module, uploading of physically signed Annexure V by tenderer has been discontinued.
The tenderer shall clearly specify whether the tender is submitted on his own (Proprietary Firm) or on behalf of a Partnership Firm / Company / Joint Venture (JV) / Registered Society /Registered Trust / Hindu Undivided Family (HUF) / Limited Liability Partnership (LLP) etc.
The corresponding documents shall be submitted by the tenderer as per the composition of the Firm: Sole Proprietorship Firm: (i) All documents in terms of Para 10 of the Tender Form (Second Sheet) above. HUF: (i) A copy of a notarized affidavit on Stamp Paper declaring that he who is submitting the tender on behalf of HUF is in the position of 'Karta' of Hindu Undivided Family (HUF) and he has the authority, power and consent given by other members to act on behalf of HUF. (ii) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above. Partnership Firm: (i) All documents as mentioned in para18 of the Tender Form (Second Sheet). Company registered under Companies Act2013: (i) The copies of MOA (Memorandum of Association) / AOA (Articles of Association) of the company (ii) A copy of Certificate of Incorporation (iii) A copy of Authorization/Power of Attorney issued by the Company (backed by the resolution of Board of Directors) in favour of the individual to sign the tender on behalf of the company and create liability against the company. (iv) All other documents in terms Para 10 of the Tender Form (Second Sheet) above. LLP (Limited Liability Partnership): (i) A copy of LLP Agreement (ii) A copy of Certificate of Incorporation (iii) A copy of Power of Attorney/Authorization issued by the LLP in favour of the individual to sign the tender on behalf of the LLP and create liability against the LLP. (iv) An undertaking by all partners of the LLP that they are not blacklisted or debarred by Railways or any other Ministry / Department of the Govt. of India from participation in tenders / contracts as on the date of submission of bids, either in their individual capacity or in any firm/LLP or JV in which they were / are partners/members. Concealment / wrong information in regard to above shall make the contract liable for determination under Clause 62 of the Standard General Conditions of Contract. (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet). Registered Society & Registered Trust: (i) A copy of Certificate of Registration (ii) A copy of Memorandum of Association of Society/Trust Deed (iii) A copy of Power of Attorney in favour of the individual to sign the tender documents andcreate liability against the Society/Trust. (iv) A copy of Rules & Regulations of the Society (v) All other documents in terms of Para 10 of the Tender Form (Second Sheet) above.
The tenderer shall be required to submit the Bid Security with the tender for the due performance with the stipulation to keep the offer open till such date as per Clause No.5 of PART -1 of The GCC, April 2022.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Guntakal Division: 1. GY: Improvements to Yard examination facilities and open shed for models at ATC of freight depot/GY.- Electrical Arrangements., 2.Electrical Arrangements for Creation and Improvement of Facilities for Locomotive Maintenance at Diesel Loco shed, Gooty.
GTL-EM-68-2025-26
GTL-EM-68-2025-26
Open
Works - General
6 Months
Anantapur, Andhra Pradesh
₹0
₹1.4 L
18 Mar 2026
24 Feb 2026
4 Mar 2026
318 items across 2 schedules
| # | Description | Unit | Qty | Rate | Amount |
|---|---|---|---|---|---|
| — | — | — | 59,14,298.41 | ||
| — | Item Breakup for | details. | — | ||
| Supply and Running of 25 mm dia, PVC conduit ( ISI marked) of wall thickness not less than 2 mm along with junction boxes, bends and all accessories etc. as required as per site requirement. Running of conduit, fixing with suitable clamps and nuts in groove / open /shelter. | — | — | — | 72,960 | |
| — | Item Breakup for | details. | — | ||
| Cutting of groove in the wall, plastering of surface to the original for concealing of the conduit in the wall (Laying and fixing of conduit will be paid separately). | — | — | — | 21,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 25mm casing and capping of ISI standard with necessary screws (the distance between the screws shall not exceed 0.5 m) including joints bends and all necessary accessories complete. | — | — | — | 48,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying, connecting & commissioning of single core multi strand 1.5 sq. mm FRLS Cu. Conductor. | — | — | — | 1,17,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, laying, connecting and commissioning of single core 2.5 Sq.mm. 1100 PVC (FRLS) insulated multi stranded copper conductor wires confirming to IS 694 (2010) with latest amendments, in existing PVC conduit pipe | — | — | — | 1,14,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, Connecting of 1 core 4 Sqmm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendments. | — | — | — | 76,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, running, Connecting of 1 core 6 Sqmm FRLS, PVC insulated Copper conductor cable with necessary accessories like cable ties etc. IS 694 (2010) with latest amendements. | — | — | — | 1,24,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, connecting and commissioning of 6A 3pin/5pin modular plug socket, with 6A modular control switch on existing control board with wiring. | — | — | — | 26,349.38 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 16 Amps 3/5 pin flush type power plug and socket with modular type switch control including all accessories. | — | — | — | 17,343 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of metal flush box-4 module of model no:JIM 04 003 of GM FOURFIVE make or its equivalent with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,676 | |
| — | Item Breakup for | details. | — | ||
| Supply and Fixing of metal flush box-8 module of model no:JIM 08 005/6 of GM FOURFIVE make or its equivalent with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 2,880 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of metal flush box-12 module of model no:JIM 12 008 of GM FOURFIVE make or its equivalent with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 4,170 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of LED of 24W LED Street light fitting as per attached Railway specification. The supply includes accessories such as clamps, etc for fixing) conforming to IEC 60598-1 or its latest amendments. | — | — | — | 1,19,448 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 20W 4 feet LED tube light with all connected accessories complete for fixing (The supply includes accessories such as clamps, etc for fixing) as per attached railway specification. | — | — | — | 34,380 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of LED flood light fittings 60 W as per attached Railway specification with all connected accessories. | — | — | — | 1,94,964 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 6A one way modular switch comply with IS:3854-1997or its latest amendments. | — | — | — | 20,350 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of Jumbo Ceiling Rose - with auto safe lock equivalent to model no: GM 8224 of GM make. | — | — | — | 3,760 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 62,220.95 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 300m Heavy Duty Exhaust fans as per IS:2312:1967 or latest including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 11,240 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of ON Delay/Interval timer in above junction box of Supply Voltage - 20-240VAC, 50/60Hz Model - 800XU of Selec. | — | — | — | 4,046 | |
| — | Item Breakup for | details. | — | ||
| supply and fixing of 3 Pole AC Power Contactor 25 Amp 1 NO 1NC AC 3 PH 415 V Coil Voltage 110 V AC Aux. | — | — | — | 6,797 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 95 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098 (Part 1) 1988 with latest amendments with necessary lugs and terminations complete. | — | — | — | 2,57,620 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 63 mm of PE-80 grade in PN-4 size as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 88,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 50 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 4,48,084 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of LTUG 4 core 25 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 1,64,384 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 50 mm outer dia of PE-100, PN6 class as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 1,68,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 95 sqmm stud type power terminal blocks Din rail mounted Model: Connect well CBB95. | — | — | — | 13,200 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Partition Plate Suitable for 95 sq.mm to 150 sq.mm terminal blocks of Model No.PPCBB1 of Connect well Make. | — | — | — | 1,760 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of RCCB 4P 40A 30mA RCCB and metal enclosure conforming to IS 12640-1 & IEC 61008-1 with its latest amendments and as advised by the site supervisor with all necessary accessories complete. | — | — | — | 64,216.8 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 40/50/63A 4P MCB C Curve, 10 KA capacity with necessary connections and all accessores complete. | — | — | — | 1,10,960 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 16 A SP 1 Modular mini MCB 3KA conforming to IS:13947 with its latest amendments, C"Curve Model No.AA 1 112 of GM make or it's equivalent in Module box including all accessories complete. | — | — | — | 33,930 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of SMC junction Box of Size 530 x 450 x 175mm of Model No: Sintex GSJB 5345 to fixing of 4-Pole MCCB and termination of cable to extend supply. | — | — | — | 30,435 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection SMC Junction Box of Size 295 x 195 x 100mm of Model No. Sintex GSJB-3020 Complete with 4-Way connector complete with SS bolts and nuts. (fixing should be required as per instruction of site supervisor). Suitable clamps for fixing (MS Clapms 02 Sets for each Box with necessary bolts and nuts as per site condition for GI channels/poles as per the directions of Site engineer. | — | — | — | 29,040 | |
| — | Item Breakup for | details. | — | ||
| Supply of self contained drinking water cooler of capacity 150 Lrs cooling capacity and 150 Ltrs storage capacity, confirm to IS: 1475 (part-i) 2001 with its latest amendments suitable for operation on 230 Volts +10%, 50 Hz single phase AC supply with latest amendments etc. Make: Usha/Blue star/Volts only | — | — | — | 91,158 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in all types soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works up to the satisfaction of the Engineer at Site. The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 90,252 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench in hard soil of size of size 400mm wide x 1 mtr. deep, and making good of the same to its original form and shape after complete including all connected materials and works. | — | — | — | 43,800 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench of size 400mm x 1 mtr deep track X-ing/Road X-ing and making good of the same to its original form and shape completely including all connected materials and works. | — | — | — | 76,586 | |
| — | Item Breakup for | details. | — | ||
| Supply erection, testing and comissionin of Maintenance free earthing with all necessary accessories complete according to IS 3043-1987 with its latest amendments and as per RDSO spec No: rdso/spec/ps/0109(rev.0)-2008 Amendment'1'. | — | — | — | 1,14,504 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 8 SWG GI wire with 40GSM Zink coated, conforming to IS:280- 2006 or latest, it is to be laid with armourd cable for earth continuity. | — | — | — | 56,520 | |
| — | Item Breakup for | details. | — | ||
| Excavation of earth for one pit in any soil andrefilling as per Drg.NO. RE/33/P702/ MOD.F. | — | — | — | 6,915.93 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of "B' class GI pipe dia 50mm, 3.1 mtrs length with 3.65 mm thickness including GI socket and nuts (3.1 mtrs ) including drilling of 12mm holes as per the RDSO Drg No. ETI/OHE/P/ 7021 (MOD.A) or if any latest. Earth electrodes shall be procured from CORE approved sources only , List of CORE approved sources is enclosed as Anneux-CORE List). | — | — | — | 27,002.56 | |
| — | Item Breakup for | details. | — | ||
| Drilling of 26 Nos of 12 mm dia holes on GI pipe dia 50 mm | — | — | — | 2,584 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Charcoal. | — | — | — | 10,565.1 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Salt. | — | — | — | 7,305.9 | |
| — | Item Breakup for | details. | — | ||
| Provision of RCC earth pit hollow box of size300 mm x 300 mm x300mm with 50 mm wall thickness as per Drg. no.SDO/RDSO/E&B/001 by using M20 Grade precast RCC. Supply and Erection of RCC precast slabs with hook to cover Earth pitsof dimensions as shown in IRSEM drg no 19-D6. All the required materials for this work i.e. stones, cement, iron and sand etc. are to be supplied by contractor.) It includes fixing of earth pits at various locations. Inspection by Consignee. | — | — | — | 18,267.06 | |
| — | Item Breakup for | details. | — | ||
| Transportation charges including loading & unloading of earthing arrangements system material to site / location. | — | — | — | 5,219.55 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of DPX3 160+18 of 6 way DB of legrand cat no.5077 46 with metal door with provision for incommer of MCCB upto 160 Amps , bus bar of capacity 250A and outging for 18 Module with busbar din and neutral link with all necessary accessories complete or equivalent make. | — | — | — | 86,496 | |
| — | Item Breakup for | details. | — | ||
| Supply and installation of DPX3 160 thermal magnetic based release; Icu = 36K A; 100A 4 Pole MCCB conform to IEC 60947-2 with its latest amendments, of model no. 4200 95 of Legrand make or equivalent make with extended ROM, spreader links (2 sets). | — | — | — | 55,500 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 32A, C-curve 3P MCBs with 10KA breaking capacity with all necessary accessories complete. | — | — | — | 25,596 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 10/16/32A SP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 with its latest amendment with all connected accessories. | — | — | — | 25,300 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of Angle Holder similar to model no. of AHLHXAW000 of Havells make or equivalent make with necessary screws and all accessories complete. | — | — | — | 4,018.5 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of Jumbo plate for Holder similar to model no. of ASSPGW002 of Havells or equivalent make with necessary screws and all accessories complete. | — | — | — | 1,339.51 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 9W LED bulbs as per attached railway specification. | — | — | — | 8,974.65 | |
| — | Item Breakup for | details. | — | ||
| Provision of mobile Charging Arrangements with following accessories (i)3 x 6 Amps one way modular switch (as per IS 3854:1997 with its latest amendments) (ii) 3 x International Socket 13/6 Amps (iii)1 x 16A SP MCB (iv) 12 module or suitable Plastic Enclosures with Cover plate for Surface Mounting, (v) Supply and fixing of 02 No's of dummy plates in the 12 modular plastic encloseure including Fixing of Charging point on the Wall/Pillers/Structure with suitable clamps/ rag bolts etc complete including all other connected materials and accessories. | — | — | — | 21,620 | |
| — | Item Breakup for | details. | — | ||
| Supply and installation of high quality statinless steel mobile charging stand to provide at stations made stainless steel (2 mm thick) material with dimension 24cm*22cm* 4 cm which is light weigt and tough at the same time look bright and elegant with mirror polish with three screw holes to easily fix on wall /pillar structure with suitable clamps/rag bolts etc complete. | — | — | — | 8,000 | |
| — | Item Breakup for | details. | — | ||
| Groove Cutting for Modular Switch Boards (Each = 1 Module) | — | — | — | 2,183.12 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 19 mm size rigid conduit pipes of 2mm thickness PVC pipe (ISI mark) concealed in wall with all required accessories conforming to IS 9537.3.1983 with its latest amendments, including masonry work and labour charges etc (For wiring points and wiring to switch boards) along with accessories ( bends, elbow, deep junction boxes (3 way, 4 Way) etc | — | — | — | 16,100 | |
| — | Item Breakup for | details. | — | ||
| Supply and Laying of 25 mm FRPP corrugated Flexible conduit pipe as per standard specification | — | — | — | 9,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of of Modular Dummy Plate for modular switch boards. | — | — | — | 1,494 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of LED Flood light fittings of 30W conforming to IS:16101 with its latest amendments, BIS with suitable driver with all connected materials as per attached Railway specifcation. | — | — | — | 23,000 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 35 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098 (Part 1) 1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 73,404 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of RCCB 2P 25A 30mA with metal enclosure, RCCB conforming to IS 12640 (Part 1) : 2024 wit its latest amendments, with 10 kA short circuit withstand capacity as advised by the site supervisor with all necessary accessories complete. | — | — | — | 81,567 | |
| — | Item Breakup for | details. | — | ||
| Supply, Transportation, Erection & commissioning of 5mtr long hot dip galvanised Octagonal pole (IS 875) with 130mm bottom A/F & 70mm top A/F made up of 3mm thick HT sheet (S 355 JO steel plate for shaft), along with base plate IS 2062 of size 200x200x12mm, M16x600 long J type EN8 grade foundation bolts, 1000mm long Single/ Double arm bracket Including the Supply of Suitable bolts with Bakelite Sheet with MCB (for mounting inside the base compartment of pole ) including Erection & commissioning of 5 mtr. octagonal pole including RCC concrete foundation & plinth in hard soil including excavation of soil, tamping of concrete, grounting and supply of other required materials and accessories complete. | — | — | — | 1,83,736 | |
| — | Item Breakup for | details. | — | ||
| Service connection to the fitting from the junction box of 5 mtrs Octogonal pole by means of PVC insulated copper conductor of 3 core 1.5 Sq mm with necessary lugs at the juction box and necessary termination at the luminaire complete. | — | — | — | 3,650 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 1.1 KV Grade 4 core 16 sqmm XLPE insulated PVC sheathed Aluminium armoured cable as per IS 7098(Part 1)1988 with latest amendments and with necessary lugs and terminations complete. | — | — | — | 2,13,720 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of HDPE pipe of 40 mm of PE 63 grade, PN8 as per IS 4984-2016 with latest amendments and with suitable couplings and clamps for cable laying with all necessary accessories complete. | — | — | — | 1,42,500 | |
| — | Item Breakup for | details. | — | ||
| Supply and transportation of 16M high mast shaft in two sections suitable for 50 m/sec wind speed, with head frame, winch mounting bracket, luminaries carriage suitable to install 16 nos luminaries in symmetrical arrangement as per the specification. Supply and transportation of raising lowering system comprising double drum winch, 6mm diameter SS wire rope, trailing cable, connector, integral power tool motor, manual handle, junction box, lightening finial. (Wiring material from JB to individual luminaire & MCB in base compartment are not included and are a part of installation). Supply and transportation of 08 nos. of foundation bolts manufactured from special steel along with nuts,washers, anchor plate and common template. Erection, testing and commissioning of the high mast with the help of suitable tools and plants including fixing, testing and commissioning of luminaries, wiring of luminaires with all wiring materials as mentioned in the detailed specification. (Drawing approval to be taken) | — | — | — | 3,33,760 | |
| — | Item Breakup for | details. | — | ||
| Designing & casting M-30 cement concrete foundation for high mast (1: 0.75: 1.5 ratio) suitable for 16 m high mast considering the safe soil bearing capacity atsite as per requirement up to 3 meter depth with 24 Nos. of 12 Tor, (T1), 24 Nos. of 10 tor (T2) in the base, 8 tor @ 190c/c) (T3) to wrap around T2, 24 Nos. of 10 tor (T4) in the base, provision of 1:4:8 PCC of 100 mm at the bottom of the foundation, including excavation in all types of soils, foundation erection of nut bolts etc in an approved manner. | — | — | — | 20,519 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of fencing panels at high mast structures location with size 2 m height as per the directions of the engineer at site. | — | — | — | 2,10,425.6 | |
| — | Item Breakup for | details. | — | ||
| Supply of LED type single dome aviation obstruction light. | — | — | — | 2,912 | |
| — | Item Breakup for | details. | — | ||
| Supply and erecting of outdoor stand mounted Feeder pillar for High mast of same manufacturer with 32A FP RCBO incomer, single dial timer switch 25A TP contactor for automatic switching of luminaries, 2 No 9A contactors and raise/lower push button and provision for termination of incoming minimum 35sq.mm and outgoing minimum 16 & 25 sq.mm cables complete erected in min. 14 guage CRCA sheet box with supporting angles, self lock, gasket and slanting top erected on CC foundation in an approved manner. | — | — | — | 27,330 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 350W LED flood light with all connected materials as per attached railway specification. | — | — | — | 1,67,200 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of surface mounting plastic gang box-4 module of model no:JS 04 003 of GM or equivalent make, with 4 module cover plate (With support frame) of model no:PK SB 04 004 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 5,409.3 | |
| — | Item Breakup for | details. | — | ||
| Supply and Fixing of Surface mounting plastic gang box-8 module of model no:JS 08 006 of GM or equivalent make, with 8 module cover plate (With support frame) of model no:PK SB 08 011 - CASABLANCA of GM make or equivalent make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 12,021.85 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of surface mounting plastic gang box-12 module of model no:JS 12 008 of GM or equivalent make with 12 module cover plate (With support frame) of model no:PK SB 12 007 - CASABLANCA of GM make or equavalant make comply with IEC 60669-1 with its latest amendments including all accessories complete. | — | — | — | 10,052.25 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 40 W 4 feet LED tube light as per attached railway specification with all connected accessories complete fixing. (The supply includes accessories such as clamps, etc for fixing). | — | — | — | 21,479.4 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and connecting of Cable Junction Boxes IP 55 / IP 65 with metric knockouts for cable entry Cable junction boxes of model no. K 9255 of Hensel make or equivalent in sintex/legrand conforming to IS:13573/92, IEC 60947-3 with its latest amendments, with necessary terminals suitable for cables upto 25 Sq.mm and all necessary accessories complete. | — | — | — | 26,550 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of LED Bollard light 8W conforming to IS:16101 with its latest amendments, of model no:SSK-053214-45-8W or its equivalent. | — | — | — | 1,09,920 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 32mm x 12mm casing and capping of model : Glory type of M/s.Press Fit make or equivalent Press Tech/Modi make with necessary screws (the distance between the screws shall not exceed 0.5 m) including joints bends and all necessary accessories complete. | — | — | — | 23,500 | |
| — | Item Breakup for | details. | — | ||
| Supply and laying of 20 mm casing and capping of ISI standard with necessary screws (the distance between the screws shall not exceed 0.5 m) including joints bends and all necessary accessories complete. | — | — | — | 12,675 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 25 mm flexible Galvanised steel with PVC coating conduit pipe as per IS 3480 with its latest amendments. | — | — | — | 23,900 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Recess mounting 18 W LED Square down lighter (22.5*22.5*2.0CM) LED lights as per attaached Railway specification, with all connected acessories. conforming to IEC 60598-1 with its latest amendments. | — | — | — | 77,600 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of LED street light fittings of 70W with suitable driver with all connected materials as per attaached Railway specification. | — | — | — | 1,55,500 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Heavy duty BLDC Air Circulator Wall Mouting Fan 600MM Sweep, 1440 RPM, 230V,AC 50Hz with spped regulator, power consumtopn at speed 1: 100 watts, speed 3: 170Watts, rated speed: 1400 rpm, air delivery : 717 CMM with reverse polarity protection, over voltage protection, short circuit protection, blocked blade protection comfirming to IS- 2997/1997 with two years warranty, Make-Bajaj, Usha, Almonard or Crompton Greaves, Airzon, Orient, RR electric. | — | — | — | 67,790 | |
| — | Item Breakup for | details. | — | ||
| Supply, Transportation and fixing of storage / Pressure type Vertical / Horizontal 230/250V Single phase 2000watts ISI mark 5 Star rated water heater with SS tank/Glass lined tank and ABS plastic body of 15 Ltrs capacity to withstand up to 6.5 bar of water pressure conforming to IS:2082/93 including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos nylon / PVC / Metallic hose pipe, testing and all labour charges etc., complete. Makes: Crompton model No. solarium plus SWH 725, Class 1 rated or its equivalent make of Make Bajaj,AO Smith,Venus,V-Guard. | — | — | — | 45,300 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing and connecting of 2pole 2 module 16A/25A Lexic RCBOs conforming to IS 12640-2(2008) or latest as advised by the site supervisor with all necessary accessories complete. | — | — | — | 16,989 | |
| — | Item Breakup for | details. | — | ||
| Supply, Laying, Testing and Termination of 4 core 185 sqmm XLPE insulated underground armoured aluminium cable with heat resistant insulation as per IS 7098(Part 1)1988 or latest amendment. | — | — | — | 2,75,635 | |
| — | Item Breakup for | details. | — | ||
| Supply fixing, of HDPE pipe of 90 mm outer dia of PE-100, PN6 class with minimum wall thickness of 3.5 mm with suitable couplings and clamps for cable laying with all necessary accessories complete and with necessary lugs and terminations complete. | — | — | — | 68,000 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 70 sqmm stud type power terminal blocks Din rail mounted Model: Connect well CBB70. | — | — | — | 20,950 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of 16 Sq.mm Standard feed through terminal blocks of Model No. CTS16U of Connect well Make. | — | — | — | 7,110 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of Partition Plate Suitable for 50 sq.mm to 70 sq.mm terminal blocks of Model No.PPCBB of Connect well Make. | — | — | — | 12,848 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of Din 35 rail 1mtr length of model no:CA701-15-1M of connectwell | — | — | — | 9,150 | |
| — | Item Breakup for | details. | — | ||
| Supply and erection of 16-25 mm² RING TYPE LUG FR SPRING LOADED | — | — | — | 3,590 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of STEEL SCREW END CLAMP FOR DIN35-15 | — | — | — | 5,320 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of B curve SP MCBs of 6A with all Connected accessories as per IEC 60898-1 or its latest amendment. | — | — | — | 6,900 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of B curve 16A DP MCBs of Rated Short-Circuit Breaking Capacity 10kA of IP 20 Protection ISI / CE Marked as per IS/IEC 60898 - 1 or its latest amendment, Cat.Nos: 811050 with all connected accessories. | — | — | — | 9,939 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of B curve DP MCBs of 32 A with all connected accessories as per IEC 60898-1 or its latest amendment. | — | — | — | 10,650 | |
| — | Item Breakup for | details. | — | ||
| Excavation of cable trench duly breaking the existing cement concrete flooring and filling with layer of sand bricks etc.,as per the standards of cable laying (A minimum of 1mtr depth and 400 mm width) and filling the trench with soil duly ramming etc. The flooring shall be made good with cement concrete as original by the contractor after completion of trenching work up to the satisfaction of the Engineer at Site.The exact route of the HT/LT cable is to be decided in consultation with Engineer in charge. | — | — | — | 35,840 | |
| — | Item Breakup for | details. | — | ||
| Design, fabrication, supply and fixing of LED Single side glow sign boards made up of SS sheet IP 50/65 with high quality NICHIA LED's, 2mm thick acrylic sheet topped on SS sheeted frame and is to be provided with computerised Vinyl stickering lettering in 'Telugu', 'Hindi', 'English', with all other connected accessories complete. Board should have uniform glow from end to end irrespective size as per RDSO Specification. | — | — | — | 29,400 | |
| — | Item Breakup for | details. | — | ||
| — | Item Breakup for | details. | — | ||
| Supply of ABS Plastic boby air coolers of white color with dientsion 655 x 627 x 475mm , operating on 230V, 1 ph air delivery 230m/hr 4 wat air defleter , 3 speed blower control with 1400 RPN, fan motor speed suitable 350 sq.ft. cooling area wit water level indicator having tank capacity of 51 litres along with suitaable trolley. Make : Symphony, kenster, Bajaj, Crompton | — | — | — | 12,728 | |
| — | — | — | 13,06,446.96 | ||
| — | Item Breakup for | details. | — | ||
| Supply and installation of 160 A 4P MCCB, 36 KA, Micro processor based adjustable with LSIG protection conform to IEC 60947-2 or its latest amendment model no. 4205 37 of Legrand make or it's equivalent with extended ROM, spreader links (2 sets). | — | — | — | 39,582 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of energy efficient BLDC star electric ceiling fan of 1200mm sweep as per attached railway specification and including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 56,564.6 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of BLDC Air circulators 400 mm sweep with 1500 RPM 32W Equivalent to EFFICIO + model of Atomberg Make including necessary plastering, masonry work and clamps nuts bolts etc... | — | — | — | 9,620 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 300m Heavy Duty Exhaust fans as per IS:2312:1967 or latest including necessary plastering, masonry work and clamps nuts bolts etc. | — | — | — | 5,620 | |
| — | Item Breakup for | details. | — | ||
| Supply and fixing of 40 W 4 feet LED tube light as per attached railway specification with all connected accessories complete fixing. (The supply includes accessories such as clamps, etc for fixing). | — | — | — | 21,479.4 | |
| — | Item Breakup for | details. | — | ||
| Supply and Erection of 1ft x 1 ft size 22 W LED Recess/Surface mounting panel Light fitting as per attached railway specification with all connected accessories. | — | — | — | 87,584.04 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing, connecting and commissioning of 1.5 Ton capacity Hi wall split inverter Air conditioner 5 star rated with hermitically sealed Copper Condensor and ISEER > 5.5, R- 32 Refrigerant including all accessories & fixing of Outdoor Mounting Stand etc. with required lenght of the cables between indoor and outdoor units Note: (1) AC unit supplied to railways must match with the BEE Star Rating valid as on the date of supply. (2)The Product must be registered, on the name of Consignee, with OEM, after successful installation and the firm shall submit the BIS Certificates. | — | — | — | 1,10,356.3 | |
| — | Item Breakup for | details. | — | ||
| Supply, installation, testing and commissioning of Energy Saver for air conditioning units for 1.5T Capacity having memory based micro controller, with Dual sensor & display for room and coil temperature, measures room /coil/ ambient temperatures- features A 10-PT programmable menu and a remote to change your set temperature, which constantly analyses the temperature transfer profiles between the air and evaporator coil. (Warranty Period : Upto 30 months from the date of delivery.) | — | — | — | 23,222.4 | |
| — | Item Breakup for | details. | — | ||
| Supply, fixing, testing, connecting and commissioning of Wall Mounted Stabilizer, with auto Cut-Off, Overload Protection, Time Delay feature, suitable for 1.5 Ton capacity split Air conditioning unit complete with all connected accessories etc. | — | — | — | 3,500 | |
| — | Item Breakup for | details. | — |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
ListofLikelySuppliers_1.pdf
ATTACHMENT
Master Tender Document
ATTACHMENT
GCC_April-2022WithCorrectionSlips..pdf
ATTACHMENT
SCOPEOFWORKFORWiring.pdf
ATTACHMENT
EARTHINGCOMBINEDSPEC-MFE.pdf
ATTACHMENT
CEGETechnicalCircular_compressed.pdf
ATTACHMENT
RITESInspectionLr..pdf
ATTACHMENT
Technicalspecifications-43-68.pdf
ATTACHMENT
MasterTenderdocumentGTL-EM-68-2025-26.pdf
ATTACHMENT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .