RENOVATION OF MAGISTRATE (G+1) BUILDING AT CIVIL COURT CHAPRA IN DISTRICT SARAN FOR THE YEAR 2025-26

TECHNICAL BID EVALUATION SHEET

BUILDING CONSTRUCTION DEPARTMENT

NAME OF WORK :- RENOVATION OF MAGISTRATE (G+1) BUILDING AT CIVIL COURT CHAPRA IN DISTRICT SARAN FOR THE YEAR 2025-26

BOQ AMOUNT:-6634037

SL.NO. PARTICULARS LAID DOWN CRITERIA AS PER NIT CONDITION FULL MARKS EVALUATION CRITERIA BIDDER

A Name and address of agency

B Registration no. & department Agency must be registered with Govt./State Govt./Undertakings Mandatory Agency must be registered otherwise bid will be rejected

C Sale tax/VAT/GST clearance of Govt. of Bihar Must possess sales tax/VAT registration & up to date clearance certificate Mandatory ---do------

D Income Tax clearance Must quote PAN No. Mandatory ---do------

E Earnest Money In the form as specified in N.I.T and required amount. Mandatory ---do------

F Character Certificate Must Posses Character Certificate. Mandatory ---do------

G Electrical Registration In the form as specified in N.I.T and required amount. Mandatory ---do------

Note:-The bidders should necessarily be Responsive on above mentioned Seven counts A to G. The bidders found Non-Responsive in any one of the above mentioned Seven counts will not be considered for further markings & their Bid will be rejected.

MARKING DETAILS

SL.NO. PARTICULARS LAID DOWN CRITERIA AS PER NIT CONDITION EVALUATION CRITERIA

FULL MARKS Desired distribution

1 Average annual financial turn over of last three years (AATO may be indexed as per norms of bidding documents) Submit A.T.O of Chartered account ant for last three years 30 i) AATO equal to or above BOQ amount--30

ii) AATO equal to or above 70%of BOQ amount--20

iii) AATO equal to or above 50% but below 70% of BOQ amount--15

iv) AATO equal to or above 40% but below 50% of BOQ amount--10

v) AATO equal to or above 25% but below 40% of BOQ amount--5

vi) AATO below 25% of BOQ amount--Nil

Average A.T.O.after indexation

2 Experience of doing work of similar nature Must submit details of work done duly certified by the concerned E.E 20 i)If executed single work of similar nature equal to 50% of BOQ amount-20

ii)If executed single work of similar nature equal to 40% of BOQ Amount----15

iii)If executed single work of similar nature equal to 25% of BOQ Amount----10

iv)If executed single work of similar nature below 25% of BOQ Amount----nil

3 Details of Engineering setup for successful completion of work Must submit details Engg. Setup with individual affidavit of engineers. 10 i)Engg.setup with one-Deg.holder+one Diploma holder+suff.. staff--10

ii)Engg.setup with1-Deg.holder/one Diploma holder+suff. staff--5

4 Plant and equipment for successful completion of work i)Automaticbatching plant with all equipment. (ii)Conc.mixer with weighing facility. (iii)Steelshuttering & centering more than 2000sft. (iv)Vibrator & water tanker. 10 i)Atomatic Batching plant with all equipment---10

(ii)Concrete mixer with weighing facility---04

(iii)Steel shuttering and centering more than 2000sft--04

(iv)Vibrator------01

(v)water tanker----01

5 Details of financial availability through bank or self Bank certificate of extending credit facility up to 10% of BOQ amount 10 i)credit facility certificate given by Indian Bank upto 10%of BOQ amount-----05

(ii)Self declaration----05

(iii)No Self declaration----00

6 Necessary undertakings Agency should furnish the following undertakings. (i)Not abandoned project. (ii)No litigation. (iii)No relation. 5 (i)Not abandoned any project--03

(ii)No litigation--01

(iii)No relation---01

(iv)Not submitted any certificate---00

7 Bidding capacity BC=AxNx2-B A=Max.ATO after indexation. B=value of work in hands(Existing commitment) N=Time of completion Attach bidding statements with details 10 i)BC more than or equal to BOQ amount--10

iI)BC more than or equal to 70%but below BOQ amount--5

iI)BC more than or equal to 50%but below 70% of BOQ amount--3

iii)BC below 50% of BOQ amount----nil

8 Timely completion of project Attach certificate of the concern E.E 5 i)If three or more than three projects executed in stipulated time during last five year--05

i)If less than three projects executed in stipulated time during last five year--03

i)If no projects executed in stipulated time during last five year--00

Note:- (i) Minimum qualifying marks = 50/100 for project b/w 40lakhs to 200lakhs

BILL OF QUANTITY

RENOVATION OF MAGISTRATE (G+1) BUILDING AT CIVIL COURT CHAPRA IN DISTRICT SARAN FOR THE YEAR 2025-26

S.NO. S.O.R. CODE ITEM DESCRIPTION QTY. UNIT RATE AMOUNT #REF!

1.0 2.8 Earth work in excavation in foundation trenches or drains(not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m . including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

1.1 2.8.1 All Kinds of soil 2.35 Cum 360.70 848

2.0 2.28 Supplying and Filling in plinth with local sand and under floors including, watering, ramming consolidating and dressing complete. 18.06 Cum 287.30 5,189

3.0 11.72 Providing designation 100 A one brick flat soling joints filled with local sand including cost of watering, taxes, royalty all complete as per building specification and direction of E/l, 39.77 Sqm 283.30 11,267

4.0 4.1 Providing and laying in position cement concrete of specified grade exluding the cost of centring and shuttering-all work upto plinth level.

4.1 4.1.3 1:2:4(1 Cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) #REF! Cum 3998.10 #REF!

5.0 15.7 Demolishing brick work including stacking of serviceable material and disposal of unserviceable material within 50 meters lead:

5.1 15.7.4 In cement mortar 0.28 Cum 823.70 231

6.0 15.12 Dismantiling doors windows and clerestory windows (steel or wood) shutters including chowkhats, architrage, holdfasts etc. complete and stacking within 50 metres lead:

6.1 15.12.1 Of area 3 sqm and below 84.00 Each 151.80 12,751

7.0 14.85 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 8.00 Each 166.90 1,335

8.0 15.25 Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead. 439.65 Sqm 106.70 46,911

9.0 15.23 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.

9.1 15.23.2 For thickness of tiles above 25 mm and upto 40 mm 724.07 Sqm 47.50 34,393

10.0 15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 192.94 Sqm 21.70 4,187

11.0 6.1A Brick work with bricks of class designation 100A in foundations and plinth in :

6.1.12/1 Cement mortar 1 .:4 (1 cement: 4 coarse sand ) 14.66 Cum 5017.90 73,562

12.0 6.3A Extra for Brick work in superstructure above plinth level upto floor V cum 12.65 Cum 842.20 10,654

13.0 5.3 Reinforced cement conrete work in beams,suspended floors, roofs having slope upto 15, landings,balconiec, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excludingthe cost of centring, shuttering, finishing and reinforement with 1:2:4(1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size). 0.97 Cum 5335.90 5,176

14.0 5.9 Centring and shuttering including strutting,propping etc. and removal of form for.

14.1 5.9.3 Suspended floors, roots, landings, balcnies and access platform. 5.60 Sqm 437.50 2,450

15.0 5.22 Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.

15.1 5.22.7A Thermo-Mechanically Treated bars TMTC-500-8mm dia. 23.82 Kg 94.50 2,251

15.2 5.22.7B Thermo-Mechanically Treated bars TMTC-500-10mm dia. 55.12 Kg 92.60 5,104

16.0 13.12.4 Providing Cement plaster in course sand 12 mm cement plaster of mix: 1:6(1 cement: 6 coarse sand) 154.10 Sqm 141.50 21,805

17.0 13.24.2 Providing 6 mm cement plaster to ceiling of mix : 1:4(1 cement: 4 coarse sand) 5.60 Sqm 125.60 703

18.0 14.1 REPAIRS TO PLASTER IN TO PATCHES

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge. 600.14 Sqm. 237.20 142,353

19.0 13.80 REMOVING OR SCRAPING OLD PAINT

Removing dry or oil bound distemper by scraping, sand paper and preparing the surface smooth including necessary repari scratches tec. Complete 6149.67 Sqm 9.70 59,652

20.0 4.2 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, post.struts, buttresses, string or lacing courses, parapets, coping,bed blocks, anchor blocks, plin window sills, fillets etc. upt floor five level excluding the cost of centring, shuttering and finishing:

20.1 4.2.3 1:2:4 (1 Cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) #REF! Cum 5128.30 #REF!

21.0 11.23 Marble stone flooring with 18 mm thick marble stone (sample of marble shall be approved by Engineer-in-charge) over 20 mm (average) thick base of cement mortar 1:4 (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with:

21.1 11.23.2.1 Rajnagar plain white marble 18mm thick above 0.20 sqm upto 0.50 sqm 684.00 Sqm 1703.40 1,165,126

22.0 11.25 Extra for marble stone flooring in treads steps and risers using single length up to 2.00m 20.54 Sqm 369.20 7,583

23.0 8.3 Providing edge moulding to 18 mm thick marble stone counters, vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge.

24.0 11.40 Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 13755 of NITCO , ORIENT , SOMANY , KAJARIA or equivalent make in colours except white , Ivory , Grey , Fume , Red , Brown , laid on 20 mm thick cement motar 1:4 (1 cement: 4 Coarse sand) including grouting the joints with white cement and matching pigments etc, complete. 57.99 Sqm 1414.00 81,998

25.0 11.41 Providing and laying vitrifed floor tiles in different sizes {thickness to be specified by the manufactruer) with water absorption's less than 0.08 % and conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand ) including grouting the joint with white cement and matching pigments etc., complete.

26.0 11.47 Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS: 15622, of approved brand & manufacturer, in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).

27.0 11.36 TILES DADO WORK

Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS : 15622 (Thickness to be specified by the manufacture) of approved make in all colours, shades except burgundy, bottle green , black of any size as approved by Engineer-in-charge in skirting , risers of steps and dados over 12 mm thick bed of cement Motar 1:3(1 cement: 3 coarse sand ) and jointing with grey cement slurry @ 3.3 kg per sqm including pointing in white cement mixed with pigment of matching shade complete. 210.180 Sqm. 795.00 167,093

28.0 26.86 Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm, modulus of elasticity 900 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for Separately).

Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.

29.0 26.87 Providing and fixing factory made single extruded WPC {Wood Polymer Composite} solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 Suspension Grade), calcium carbonate and natural fibers {wood powder/ rice husk/wheat husk) and non toxic additives {maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800N {Face) & 900N (Edge), minimum compressive strength 50 N/mm, modulus of elasticity 850 N/mm and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In• Charge. {Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

30.0 9.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately). Local wood

30.1 9.1.1 Second class teak wood 0.650 Cum 120526.60 78,342

31.0 14.2 Fixing chowkhats in existing opening including embedding chowkhats in floors or walls cutting masonry for holdfasts, embedding hold fasts in cement concrete blocks of size 15 x 10 x 10 cm with cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size), painting two coats of approved wood preservative to sides of chowkhats and making good the damages to walls and floors as required complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in- Charge.

31.1 14.2.1 Door chowkhats 48.00 Each 795.20 38,170

32.0 9.5 Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, including ISI marked M.S.pressed butt hinges bright finished of required size with necessery screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin-charge.

32.1 9.5.3.2 Kiln seasoned selected planks of sheesham wood. 30 mm thick 30.79 Sqm 2445.80 75,306

33.0 9.7 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick:

33.1 9.7.2 Klin seasoned and chemically treated hollock wood for 40,35,30,25mm thick shutters 26.17 Sqm 1611.10 42,162

34.0 9.147D Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. 27.5 2.5558

34.1 9.147D.1 Two track two panels sliding window made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) 88.78 Sqm 7074.90 628,110

35.0 9.97 DOOR TOWER BOLT

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ), transparent or dyed to required colour or shade, with necessary screws etc. complete:

36.0 9.100 DOOR HANDLE

Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete:

37.0 9.48 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.

37.1 9.48.2 Fixed to openings/ wooden frames with rawl plugs screws etc 590.50 Kg 161.10 95,130

38.0 13.80.A.2 2.0 MM WHITE CEMENT PUTTY

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 6903.92 Sqm 105.40 727,673

39.0 13.48 INTERNAL WALL AND CEILING PAINT

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications.

39.1 13.48.1 Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqm. 5971.480 Sqm 117.30 700,455

40.0 13.46. Finishing walls with Acrylic Smooth exterior paint of required shade :

40.1 13.46.1 New work (Two or more coat applied @ 1.67 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) 932.44 Sqm 137.00 127,744

41.0 13.82 PAINT OVER WOOD AND MS WORK

Painting with ready mixed paint of approved brand and manufacture in all shades to give an even shade:

41.1 12.82.1 New steel work (two or more coats) 27.440 Sqm 83.50 2,291

41.2 13.82.2 New wood work (two or more coats) 69.280 Sqm 83.50 5,785

41.3 13.82.3 Old steel work (one or more coats) 72.210 Sqm 54.10 3,907

41.4 13.82.4 Old wood work (one more coats) 119.010 Sqm 54.10 6,438

42.0 13.82B Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacture's specifications including appropriate priming coat, preparation of surface, etc. complete.

42.1 13.82B.2 On concrete work 102.230 Sqm 122.70 12,544

43.0 13.101.1 French spirit polishing: Two or more coats on works including a coat of wood filler. 191.310 Sqm 215.80 41,285

44.0 18.49 Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 9.00 Each. 434.20 3,908

45.0 18.52.1 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore 12.00 Each. 594.80 7,138

46.0 18.8 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement ,trenching ,refilling & testing of joints complete as per direction of Engineer in Charge.

46.1 18.8.2 20 mm nominal outer dia Pipes 67.520 Rmt 205.30 13,862

46.2 18.8.3 25 mm nominal outer dia Pipes 72.670 Rmt 294.70 21,416

47.0 12.78 Providing and fixing on wall face unplastidsed-PVC(working pressure 4 kgf per sqm) rain water pipes conforming to IS :4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

48.0 12.79 Providing and fixing on wall face unplasticised -PVC molded fittings/accessories for unplasticised-PVC rain water pipes conforming to (S:4985 including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.

48.3 12.79.3.2 S/T 110mm dia without door 5.00 Each. 193.40 967

49.0 12.80 Providing and fixing unplasticised -PVC pipe clip of approved design to unplasticised PVC rain water pipe by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing on cement mortar(1:4) 1 cement: 4corsa sand and making good the wall etc complete

49.1 12.80.1 UPVC pipe clip 75 mm bend 2.00 Each. 184.10 368

49.2 12.80.2 UPVC pipe clip 110 mm bend 39.00 Each. 182.72 7,126

50.0 17.3 Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

50.1 17.3.1 W.C. pan with ISI marked white solid plastic seat and lid 11.00 Each. 5504.30 60,547

51.0 17.4 Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :

51.1 17.4.1 One urinal basin with 5 litre white P.V.C. automatic flushing cistern 5.00 Each. 3723.20 18,616

52.0 17.7 A Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- (a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer 9.00 Each. 3932.10 35,389

53.0 17.8 Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings. 9.00 Each. 1500.00 13,500

54.0 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.

54.1 17.28.2.1 Flexible pipe 32mm dia pipe 9.00 Each. 104.40 940

55.0 17.31 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 9.00 Each. 1068.50 9,617

56.0 17.29 Providing and fixing 100 mm sand cast Iron grating for gully trap. 12.00 Each. 45.20 542

57.0 18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 2000 Liter 9.70 19,400

58.0 14.4 Making the opening in brick masonry including dismantling in floor or walls by cutting masonry and making good the damages to walls, flooring and jambs complete, to match existing surface i/c disposal of mulba/ rubbish to the nearest municipal dumping ground, all complete as per direction of Engineer-in-Charge.

58.1 14.4.1 For door/ window/ clerestory window 5.86 Sqm 534.50 3,132

59.0 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. 10.97 Cum. 219.30 2,406

60.0 0L01 Supplying and providing unskilled labour for campus cleaning work. 25.00 Each 405.36 10,134

Note:- Rate inclusive of 15.0% C.P & O.H + 12.0% GST + 1.0% Labour Cess.

For 12.0% GST multipying factor 0.1405

61.0 CARRIAGE OF MATERIALS

61.2 (ii) Coarse Sand @ 756.43/Cum 100.23 Cum. 756.43 75,817

62.0 EXTRA COST OF MATERIALS

(A) GRAND TOTAL (A) 6,411,957

(B) Correction Factor @ 0.982 on (A) 6,296,542

(C) Add @ 5.36 % of (B) for Balance GST 337,495

TOTAL 6,634,037

Executive Engineer

Building Division,