Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹33.2 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹33.8 L+₹26,477 (0.79%)Rejected-Finance | L2 | Rejected-Finance Other than L1 | |
| 3 | L3₹34.4 L+₹85,032.50 (2.54%)Rejected-Finance | L3 | Rejected-Finance Other than L1 | |
| 4 | L4₹34.8 L+₹1.2 L (3.69%)Rejected-Finance | L4 | Rejected-Finance Other than L1 | |
| 5 | L5₹36.3 L+₹2.8 L (8.28%)Rejected-Finance | L5 | Rejected-Finance Other than L1 |
Tender Value
₹42 L
EMD Value
₹84,000
Closing Date
17 May 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NORTH) TEZPUR
GE (NORTH) TEZPUR, C/O 99 APO
DAY TO DAY OF MAINTENANCE OF B/R ITMES AND PETTY REPAIR INCL ROOFS OF SECTOR V TO XI OF AGE CHARDUAR UNDER GE (N) TEZPUR
2024_MES_650322_1
GE(N)/TEZ/2024-2025/8905
Open Tender
Civil Works
Item Rate
335 days
GE (NORTH) TEZPUR
As per tender documents
8 documents required · 8 mandatory
₹500
GE (NORTH) TEZPUR
₹84,000
1 Jul 2024
19 Apr 2024
24 May 2024
19 Apr 2024
17 May 2024
3 May 2024
Amount
Note 1: (Applicable for all parts/items) : The biidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates. Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading of incorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender.
Dismantling plain or corrugated AC sheeting , any, thickness or similar pattern roof coverings.
Pre-painted galvatume aluminium zinc coating GI based corrugater steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.
S&F Pre- painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley/gutter/eve board fixed with self tapping screws etc., complete all as specified and as directed.
M&L for 6 mm thick asbestos cement corrugated or semi-corrugated sheets in roofs, walls ,sunshed etc fixed with L-Type or J-Type or cranked hook bolts..
Dismantling of old decayed timber scantling 40 Sqcm and over in section in any position in unframed work and removing materials from site of work complete all as directed
M & L for second class hard wood in scantling clean Sawn and fixed complete all as specified and as directed.
S&F 2nd class hard wood plain, solid, straight chowkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
Dismantling of wall and ceiling boards (Fibre/Pulp/Plywood) any thickness including cover fillets
S & F anodised GI snap grid (Size of grid 605mmx605mm ) frame work for false ceiling including GI wire 4mm thick as a suspender for GI snap grid framing all as specified
S&F 4 mm thick Non asbestos fibre cement building board decorative type( e-board) fixed in aluminium snap grid frame work with screws.
M&L 4mm thick Asbestos cement plain building boards, fixed to timber framework with screws
M&L for 6 mm thick Cover fillets of standard hard board, 40mm wide, and fixing with screws
Dismantling of old damaged timber fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section as in unframed work of any description and removing unserviceable materials from site of work complete all as specified and directed.
M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,clean sawn ,secured with nails or brads (sectional area exc13 sq.cm & n exc 25 sq.cm)as in studs of ceiling / sunshed..
All as per item no (12) but (sectional area exc 6 sq.cm & n exc 13 sq.cm) as in ceiling/ jali window frame/bird proof
M&L for 2nd class hard wood plain fillets ,square, rectangular or triangular in section ,wrought ,secured with nails or brads but (sectional area exc 3 Sqcm &n exc 6 sq.cm) in filet etc complete
Dismantling boarding, any description, fixed in any position with nails
M&L for 2nd class hard wood 40mm thick clean sawn as in joist of ceiling complete all as specified and directed
M&L for 20mm thick second class hardwood planed at both sides boarding as in eaves boards
25 mm lnsulated PVC Wall Lining consisting of PVC Insulated Panels with Single Side Prelam PVC sheet used in-stead of plain colour sheet duly fitted into the wall as per specifications and drawing
Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing)removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc
Brushing neat cement slurry with 3.0kg of cement per sq. metre
M&L for non skid ceramic colour tiles, 7 to 8 mm thick, area of each tiles exc 0.06sqm but not exc 0.11 sqm squre / rectangular in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over 15 mm thick screed bed or bedding layer in cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed.
M&L for vitrified ceramic tiles 10 mm thick squre / rectangular area of each tiles not excedding 0.36 sqm in floor set and jointed in neat cement slurry and pointed in cement mixed with colour pigment to match over 15 mm thick screed bed or bedding layer in cement mortar(1:4) as in floors for receiving tiles complete all as specified and as directed.
M & L for 300 x 200 x 7mm thick coloured glazed ceramic tiles as in vertical surfaces such as dados / skirting etc. set and jointed in neat cement slurry and pointed in white cement over 10 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.
Demolition of Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floor, aprons etc all as specified and directed by Engr-in-Charge.
M&L for 20-25mm thick machine cut kota stone slab flooring over 15mm thick screed bed or bedding layers laying in CM (1:6) for floor finishes to receive kota stone laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, moulding and polishing complete all as specified and directed by Engr-in-Charge.
-ditto - but as in skirting/dado but over 10 mm thick rendering over CM 1:4
S&F granite stone slab of any type 20 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing over 20 mm thick screed bed of cement mortar 1:6.complete.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for
M&L for hard core broken bricks of gauge n. exc. 63mm, deposited, spread and levelled in layers n. exc. 15cm thick, water and rammed to a true surface complete all as specified and directed.
M & L for 100 mm thick cement concrete Type C2, 1:3:6 (40 mm graded aggregate as in sub bases all as specified and directed by Engr-in-Charge
M&L for rough finished formwork to edges of concrete flats, treads, break in floors, window cills, concrete railings, floor and roof n.exc 20 cm wide and side of RCC/ PCC band in walls, horizantal or sloping or similar work exc 10 cm but n. exc 20 cm wide.
M&L for pcc side copings by using cement concrete 1:2:4 type B1 (20mm graded agg) all as specified and directed.
M&L for sand filling under floors etc complete incl watering & well ramming complete.
M&L for Machine pressed precast concrete interlocking paver block ruberised any shape and size, with grey cement and pigment confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade joints of blocks to be filled with dry sand completed all as specified and directed
S&F Cement concrete tiles 25mm thick, machine pressed set jointed and pointed in neat cement slurrry and polished exterior tiles superior quality of approved size/design/shade set & jointed in neat cement slurry & pointed in white or coloured cement to match as in floor including 20mm thick screed bed in CM 1:4 complete all as specified and directed.
Demolition of brick or stone/boulder masonry built in cement mortar.
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in CM 1:4 all as specified.
All as per Item No 51 above but except bricks. (Bricks recd from demolition)
M&L for brickwork with sub class 'B' bricks, straight or curved on plan exc 6m mean radius in half brick thick wall built in CM 1:4 all as specified.
Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level all as directed.
M&L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection finished even and smooth using extra cement complete all as specified and directed.
Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc, all as directed.
M&L for 15mm thick rendering in cement mortar (1:6) on fair faces of brickwork or concrete surfaces and finishing the surface even and smooth without using extra cement complete all as specified and as directed.
M & L for rendering 15 mm thick on fair face of brick wall or concrete surface in cement mortar1:4 mixed with WPC @ 3% (or as per manufaturers instruction) finished even and smooth without using extra cement, complete all as specified and as direted. (Note : WPC shall be measured and paid separately)
Taking down plastering on lathing (other than wire-netting), without removing lathing, in cement lime or CM(one side only measured in cases where both sides are plastered)
Gl wire netting 0.90mm dia & 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting & waste
M&L Rendering 10mm thick on stone masonry surfaces or surface other than one face of lathing in CM (1:6)
M&L Rendering 10mm thick on stone masonry surfaces or other side of lathing of lathing in CM (1:6)
Supplied only integral waterproofing liquid
M & L for applying three coats of white washing to new plastered wall surfaces inluding preparation of surfaces complete all as specified
M & L for applying two coats of white washing to new plastered ceiling surfaces inluding preparation of surfaces complete all as specified
M&L for applying two coat of cement based paint paint on new surface including preparation of surface complete all as specified and directed.Priming plastered and other surfaces with alkali resistant priming paint complete all as directed.
M & L for preparation of new plaster surface of walls etc and applying two coats of acrylic washable distemper over 1 mm thick wall care putty in two coats over a coat of primer (smooth bodied opaque finish surface) complete all as specified and directed.
Taking down chowkhat or farme with shutter (without taking off shutter from the frame) area n exc 1.50 Sqm each and removing from site complete all as specified and directed.
Taking down chowkhat or farme with shutter (without taking off shutter from the frame) area exc 1.50 Sqm but not exc. 4 Sqm each and removing from site complete all as specified and directed.
Taking down shutter of any description area n.exc 1 sqm each and removing from site complete all as specified and directed.
Taking down shutter of any description area exc 1 sqm and n exc 2 sqm each and removing from site complete all as specified and directed.
S & F 2nd class H/W plain framed panelled shutters 35mm thick (any number of panels) with panels of timber particale board particale board medium density wood panel both side feather edge or veneered particale board medium density wood particale board with comercial face etc complete all as specified in SSR Part-I, Section 1 Clause 8.20 (a).
S & F 2nd class H/W glazed and skeleton shutters 35mm thick open rebated and prepared to received glass, without (sash bars), edges of framing plain , chamfered or rounded fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in SSR Part-I, Section 1 Clause 8.20 (a).
S&F 30mm thick glazed and skeleton shutters 2nd class hard wood , open rebated and prepared to receive glass, gauge etc divided into squares, with plain, cham-fered or rounded, mitred and rebated sash bars provided with stiles and rails as specified in SSR Part I ,section 8 clause8.20(b).
S&F solid PVC door frame of size 50 x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube etc complete all as specified and directed.
S & F factory made solid panel PVC door shutter 30mm thick (style) consisting frame made out of MS tube for top and bottom rail MS frame shall be covered with heat mould plain colour PVC C channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheet for top rail lock and bottom rail on either side and as gap insert for top rail and bottom rail plain colour PVC sheet tape fixed in MS frame welding sealed to the style and rail with suitable PVC sheet bearing and jointing together with solvent cement etc complete all as specified and directed..
S&F Anodised aluminium frame powder coating ( Minimum thickness of powder coating 50 micron) for door,window and ventilator with one or more rebates including joining cleat for fixing etc complete all as specified and directed.
S&F Anodised aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handels 2 Nos in each door, hinges, anodised alumnium snap beading, screws etc. complete all as specified
S&F powder coating ( Minimum thickness of powder coating 50 micron) Anodised aluminium window & ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised alumnium snap beading, screws etc. complete all as specified
M&L Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.
S&F aluminium (Extruded section body) door closer hydraulically regulated, designation No.3, universal type,suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg. complete all as specified and directed.
S&F Sheet glass 5.5mm thick, ordinary quality & glazing with oil putty in square exc 0.5 sq.m in each pane including hacking out old broken glass (any thicknesss, size,quality or description) from metal frame inlcuding punching or drilling out old glazing pins/spring clips & providing & fixing new ones
M&L 10/12mm thick prelaminated particle board, exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screws to timber frame work fixed as in repairs, complete all as specified and directed.
S & F 100mm medium weight ,cold rolled mild steel butt hinges.
S & F 75 mm medium weight ,cold rolled mild steel butt hinges.
S & F 150mm mild steel pressed handles, oval type, stove enamelled black.
S & F 125mm mild steel pressed handles, oval type, stove enamelled black.
S&F 300mm long mild steel sliding door bolts ,plate type , stove enamelled black,with bright bolt not less than 12mm with and including a minimum of 6 bolts and nuts , four on bolt plate and two on staple plate .
S & F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed
S & F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed
S & F Galvanized wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples in repairs.
S & F for 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.50.m in each pane.
S&F in repairs stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperture 1.40mm & fixed, including taking down old wiremesh complete all as specified and directed.
M&L for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Material and labour for preparation of new or previously un-treated wood and wood base surfaces of any description, not otherwise described nexc 10cmwidth or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.
Preparation of old painted surface of wood and wood based materials of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
All as per serial item above but not exc 10 cm width or girth complete all as specified and directed.
Dismantling wrought iron or mild steel work of any description not otherwise provided for
M&L framed work as in doors or gates of angle or other section with gusset plate plates rails braces etc complete drilling for fixing of steel sheeting or other covering materials or welding complete all as specified and directed including fixing, complete all as specified and directed.
S & F MS steel work in tubular/rectangular trusses/angle and tubular posts/purlin including special shaped washers etc., complete using but welded tubes confirming to IS 1161- 1979 graded St 240 with one shop coat of zinc chromate primer paint.
S&F of framed work as in guard bars ,grills ,gratings and similar work confirming to FE 290,Gde-E-165 Etc.
Welding in repairs exc 2.5cm but n exc 5cm in length thickness of metal to be welded exc 20mm but n exc 25mm,including refixing the same complete all as specified and as directed
Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer.
All as per serial item above but not exc 10 cm width or girth complete all as specified and directed.
Preparation of old painted surface of steel or iron work of any description over 10cm in width or girth and applying two coat of synthetic enamel paint complete all as specified and directed.
Taking up or down steel tubing and connections, 15mm bore and removal of unserviceable pipe from site of work complete all directed.
Supply and fix 15mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.
Taking up or down steel tubing and connections, 20mm bore and removal of unserviceable pipe from site of work complete all directed.
Supply and fix 20mm bore galvanized steel tubing "medium grade" with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and as directed.
Supply and fixed in repair 15mm bore chromium plated bib taps, cast copper alloy, screwed down, with crutch or butterfly handle, screwed for steel pipe or brass ferrule complete all as specified and directed.
Supply and fixed in repair 15mm bore chromium plated stop valves, cast copper alloy screwed down, high pressure with crutch or butterfly handle, screwed both ends for steel pipe for unions complete all as specified and directed.
S&F in repair vitreous China Urinal, bowl type (back or corner wall type) size of 465x355x265mm white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinalto plugs with and including 60 mm long brass screws, pointing around urinal back in cement, complete all as specified and directed.
S&F in repair vitreous chaina wash hand basin 550X 400mm (flat ball type) any size including cutting for and pinning in ends of brackets and fixing of supply and waste water pipe complete all as specified and directed.
S & F in repairs 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe. complete all as specified and as directed.
Supply and fixed in repair vitreous china wash down water closet pan (Pedestal pattern), white, including fixing bolts nut & plastic water closet seat back excld flushing cistern and flush pipe, including taking down unserviceable water closet pan complete all as specified and directed.
S&F in repair vitreous chaina squating pan orissa pattern size 580X 440mm white with intregal foot rest complete including lime concrete (excluding flushing cistern and flush pipe) but connecting to flushing pipe, anti-symphonage pipe etc. complete all as specified and directed.
S&F in repair 10 ltr capacity PVC valveless syphone action type, flushing cistern low level, white with inlet, ball valve float and handle incl brackets with PVC high flush pipe complete all as specified and directed.
S&F 15 mm size PVC connection pipe with PTMT nuts of length 600 mm complete all as specified and directed.
S&F in repair Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union
S&F in repair Soap dish, Vitreous China white, approximate size 160x160x90mm
S&F in repair chromium plated towel rail 600mm long complete all as specified and directed.
Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified
Dismantling existing water tanks capacity exc 250 Ltrs but n.exc 500 Ltrs, removing from site complete all as specified and directed.
S&F in repair 500 ltrs rotational moulded polythytene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position as specified in SSR Part I including 20 mm ball brass valves high pressure with polythene float and nut complete all as specified and as directed.
S&F in repair ball brass valves high pressure, with polythene float and fly nut complete screwed for iron pipe or for brass ferrule and fixed 20 mm bore dia of pipe complete all as specified and as directed.
Dismantling existing water tanks capacity exc. 500 Ltrs but n.exc 1000 Ltrs, removing from site complete all as specified and directed.
S&F for 1000 Ltr capacity rotational moulded polythelene, three layer, PVC water storage tanks (cylindrical or vertical with closed top) hoisted and fixed in position complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity of tanks exc. 250 ltrs and not exc. 500 ltrs cleaning with wire brush complete all as specified and directed.
Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity of tanks exc. 500 ltrs and not exc. 1000 ltrs cleaning with wire brush complete all as specified and directed.
S & F in repairs of 20mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe & fixed complete all as specified and directed.
S&F Toilet paper holder with flat recessed type stainless steel complete all as specified and directed.
Supply and fixing sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long all as specified and directed .
S&F for aluminium tubular towel rail of superior quality 'D' type 20mm dia 60cm long between flanges as in repair complete all as specified and directed.
S&F Bottle trap of PTMT having minimum wate seal of 25mm. (Minimum weight 32mm -260gms/40mm-270gms) all as specfied and directed.
S&F Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 90 gms) all as specified and directed
M & L for PVC (SWR) Floor trap of 75 mm outlet plain with grating including jointing with solvent cement complete all as specified and directed.
S&F UPVC soil or waste pipe 110 mm bore single socket in any length type 'B' with rubber ring joints laid in trenches or floor / wall complete all as specified and directed.
All as per serial item above but 75 mm bore completeall as directed.
S&F UPVC (SWR) bend in any radius 110 mm dia. complete all as specified and directed.
All as per serial item above but 75 mm dia completeall as directed.
S&F UPVC pipes 50 mm bore fixed to walls, floors,ceiling etc. complete all as specified and directed.
S&F in repair Sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe over all size 915 mm x 460 mm and bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
S&F for 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm125gms).
S&F for 15mm dia Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms
S&F PVC waste pipe of standard quality suitable for 32 mm bore waste coupling for WHB/ urinal complete all as specified and directed.
S&F 3mm thick tarfelting for laying on AC /CGI/Galvalume Sheet for preventing to small roof leakage etc all as specified and directed by Engineer-in-Charge .
M/S SAMJHANA CONSTRUCTION
M/s Brahamaputra Wood Industries
M/S L N ENTERPRISE
M/S JALALUDDIN AHMED
stage.html
html • 0.05 MB
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .