Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹4.8 LAccepted-AOC 27 VILL BHEELPURA P O PILKHANI AMBALA 133104 | AMBALA | AMBALA | HARYANA | 133104 | ₹4.8 L Quoted ₹4.9 L | 1 | Accepted-AOC ok |
| 2 | 2₹5.1 LRejected-Finance 233 12 AMARGARH GAMRI GALI NO 11 KAITHAL 136027 | KAITHAL | KAITHAL | HARYANA | 136027 | ₹5.1 L | 2 | Rejected-Finance ok |
| 3 | 3₹5.3 LRejected-Finance RADAUR ANAJ MANDI ROAD RADAUR DISTT KAITHAL | KAITHAL | HARYANA | ₹5.3 L | 3 | Rejected-Finance ok |
| Sl No | Description | Qty | Unit | The New Raj Co-Operative L&C Society Ltd, Radaur L3 | The friends cooperative labour & construction society Ltd. L2 | THE DISIKA CO-OP LC SOCIEY LIMITED L1 |
|---|---|---|---|---|---|---|
| 1.00 | New Water Connection | 1 | Each | 3,500 ₹3,500 | 1,500 ₹1,500 | 2,800 ₹2,800 |
| 2.00 | Single Pole Setup Cycle - Providing, Designing and Single Pole Setup Cycle and standing within pair of size 933 x 550 x 1330mm fabricated and other specifications mentioned in detail estimate complete in all respect | 1 | Each | 50,000 ₹50,000 | 40,000 ₹40,000 | 55,000 ₹55,000 |
| 3.00 | Providing and fixing Pull Chair in a pair with below specifications:- Dimensions (LxWxH): 1950x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe.(‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 50,000 ₹50,000 | 40,000 ₹40,000 | 55,000 ₹55,000 |
| 4.00 | Providing and fixing Seated Chest Press in a pair with below specifications:- Dimensions (LxWxH): 1800x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 50,000 ₹50,000 | 40,000 ₹40,000 | 55,000 ₹55,000 |
| 5.00 | Providing and fixing Elliptical exerciser with below specifications:- Dimensions (LxWxH): 1200x540x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm and 25mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly.
Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer.
1. ISO 18001
2. ISO 50001:2018
3. ISO 45001:2018
4. ISO 14001:2015
5. ISO 9001:2015
6. DIN 79000-2012
7. EN 16630:2015 | 1 | Each | 50,000 ₹50,000 | 40,000 ₹40,000 | 40,000 ₹40,000 |
Tender Value
₹6.5 L
EMD Value
₹12,940
Closing Date
12 Dec 2025, 5:00 pmClosed
Saurabh Goel
Municipal Corporation Ambala
Construction of Park in Asha Singh Garden ward no 3 Municipal Corporation Ambala City (Only for L/C Societies)
2025_HRY_488204_1
2025C77545E6 467C 4D3C B329 DD64D2A1E151282ULB
Open Tender
Civil Works
220 days
Ambala City
2 documents required · 2 mandatory
₹1,000
₹12,940
Yes
21 Jan 2026
5 Dec 2025
13 Dec 2025
5 Dec 2025
12 Dec 2025
5 Dec 2025
Amount
New Water Connection
Single Pole Setup Cycle - Providing, Designing and Single Pole Setup Cycle and standing within pair of size 933 x 550 x 1330mm fabricated and other specifications mentioned in detail estimate complete in all respect
Providing and fixing Pull Chair in a pair with below specifications:- Dimensions (LxWxH): 1950x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe.(‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015
Providing and fixing Seated Chest Press in a pair with below specifications:- Dimensions (LxWxH): 1800x700x2000mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 50mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80- 120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Seat to be made up from virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness,coloured, UV resistant and environmental friendly. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment are fitted with inbuilt limiters to prevent unwanted movements. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015
Providing and fixing Elliptical exerciser with below specifications:- Dimensions (LxWxH): 1200x540x1600mm. Fabricated with main post of NB 100mm (G.I) ‘C’ Class Pipe of approved make. Main frame of NB 65mm (G.I) ‘C’ Class pipe. Handle frame of NB 32mm and 25mm (G.I) ‘C’ Class pipe. (‘NB’ stands for Nominal Bore i.e., internal Diameter of pipe in millimetres). All pipes are powder coated with 80-120 micron thick Akzo Nobel or equivalent paints. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Handle bars are provided with high end quality rubber grips. Base plate cover made of virgin LLDPE plastic by rotational moulding with minimum 4.00mm thickness, UV resistant and coloured. Maintenance free bearings of SKF or equivalent make duly oil sealed and self-lubricated are used in the equipment manufactured. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. Once the concrete is set, the equipment is fixed on to it and nuts and bolts are covered with base plate cover. High tensile steel with galvanized nut bolts are used for assembly. Equipment must be made and confirms with the approved standards certified by and certificates are mandatory requires in the name of both Tenders act as bidder and manufacturer. 1. ISO 18001 2. ISO 50001:2018 3. ISO 45001:2018 4. ISO 14001:2015 5. ISO 9001:2015 6. DIN 79000-2012 7. EN 16630:2015
Bidder Name
Amount
The New Raj Co-Operative L&C Society Ltd, Radaur (GSTN-NA) BID ID -1384516
The friends cooperative labour & construction society Ltd. (GSTN-NA) BID ID -1384490
THE DISIKA CO-OP LC SOCIEY LIMITED (GSTN-06AAHAT9401E1ZL) BID ID -1384432
The New Raj Co-Operative L&C Society Ltd, Radaur (BID ID -1384516)
THE DISIKA CO-OP LC SOCIEY LIMITED (BID ID -1384432)
The friends cooperative labour & construction society Ltd. (BID ID -1384490)
The New Raj Co-Operative L&C Society Ltd, Radaur (BID ID -1384516)
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.81 MB
BOQ_566371.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
