REPAIR TO BOUNDARY WALL, FENCING GATE AT 769 SU AND DARJIPURA AT AFS VADODARA

Amount

Demolition of brickwork, precast concrete articles and precast concrete block walling, stone /boulder masonry built in cement mortar complete all as specified and directed

M&L for modular Brick straight or curved on plan exc 6 m mean radius in CM 1:6 complete all as specified and directed

M&L for Pre-cast cement concrete block using cement concrete type C-1 1:3:6 mix (20mm graded aggregate) masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed

M&L for cement concrete type B1 1:2:4 (20mm graded agg) in coping and similar work, incl necessary form work complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed

M&L for rendering 15mm thick cement plaster in CM 1:4 using integral waterproofing compound @ 3% by weight of cement on fair faces of brick or concrete surfaces finished even & smooth without using extra cement complete all as specified and directed.

supply only Integral waterproofing compound complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls priming plastered and other surfaces with alkali-resistant priming paint and applying two coats of cement base paint in Camouflage pattern as per approved CCD Scheme design (colour as approved by GE) complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of walls for applying two coats of Exterior acrylic Emulsion over a coat of primer all as directed by Engineer -in-Charge.

Demolition of stone slabs and tiles of any description or any thickness, laid bedded and pointed in any mortar.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills and including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, incl 10mm thick backing coat in CM 1:4 all as specified and directed.

Demolition of cement Concrete of Trellis work (Jaffri), including taking as under of battens in trellis complete all as specified and directed

M&L for providing precast cement concrete type B0 1:2:4 (12.5 mm graded aggregate) for louvres and jallies (jaffri work) 35mm thick set in CM 1:4,all as specified and directed

M&L for Providing precast cement concrete Type B1 1:2:4 (20 mm aggregate) pier caps, columns, posts, boundary pillars (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM 1:4 complete with joints to match complete all as specified and directed

M&L for precast cement concrte type B-1 1:2:4 (using 20mm graded stone aggregate) set in CM 1:6 in landings, cover slabs with plain faces complete all as specified and directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed

M&L for 75 mm thick Plinth protection concrete (1:3:6) type C-2 using (40 mm graded crushed stone aggregate) as path complete all as specified and directed.

M&L for 100 mm thick cement concrete type B-2 1:2:4 (40 mm graded aggregate) as in path flooring, finishing cement concrete surface even and smooth without using extra cement all as specified.

M&L for 100 mm thick cement concrete type D2 1:4:8 (40 mm graded aggregate) as in sub base flooring all as specified.

M&L for Sand filling under floors or in foundations including watering and consolidation all as specified.

M&L Machine pressed precast concrete coloured interlocking paver block with grey cement and pigment any shape and size confirming to IS 15658 - 2006 of 60 mm thickness, M-35 Grade in floors/ pavement/ parking laid all as specified.

M & L cement concrete chequered tiles of size of size 300x300x25mm thick with approved colour & design and prepolished set and jointed in neat cement slurry and pointed in white/colour cement to match the shade of the tile incl, complete all as specified and directed.

M & L for Pavement floor vitrified tiles of size exc 0.18 sqm but not exc 0.36 sqm 10mm thick (Endura tiles of Johnson or equivalent makes listed in List of Makes) set, jointed and pointed in neat cement slurry and pointed with grey cement and pigment to match the colour of tiles in floor complete all as specified and directed.

M & L for 20 mm thick screed bed or bedding layer in cement mortar 1:6 for laying floor finishes complete all as specified and directed.

M&L Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. as directed.

M&L for Cement concrete 1:2:4 type B2 (using 20mm graded stone aggregate) in surface channels and drains forming fair finished channel or drain n exc 60 cm inner girth in cement concrete using extra cement etc complete all as specified and directed

Dismantling fencing wire mesh, any type complete all as specified and directed.

Supply only Chain link MS galvanisd fencing, any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion in cement concrete and making good disturbed ground complete all as specified and directed.

Excavation in post holes (or similar holes) in any type of soil, each n exc 0.50 cum ,getting out returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exc 25 cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface.

M&L for PCC 1:3:6 Type C2 (40 mm graded stone aggregate) in post, foundation, filling and mass concrete complete all as specified and as directed by Engr-in-Charge.

S&F, angle iron as in posts, struts in fencing including cutting top to shape required, drilling holes, notching for wire and flat iron 40 x 6mm for securing wire mesh etc complete confirming to fe-290 gde E-165 all as speciified and directed

S & F mild steel screw bolts( machine made) 11 to 15 mm dia of neck with hexagonal or square head at one end and screwed the other, or screwed both ends each screwed end to be fitted with washers and one hexagonal or square nut,but length of bolt not exc 5 cm long complete.

M&L for MS round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed

M&L for Mild Steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to Fe.290 Gde-E-165 complete all as specified and directed.

S&F Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes framed guard bars barred iron doors ladders framed balusters walk ways railings framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified

S&F Joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. ( confirming Fe 410-W (Gde-E-250) quality-A complete all as specified and directed.

M&L for preparation of new surfaces of steel or iron over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide zinc chrome primer complete all as specified and directed.

Preparation of old painted steel and iron surfaces of any description over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old or previously untreated surface of steel and iron work and applying one coat of Aluminium paint complete all as specified and directed.

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed.

Excavation in trenches exc 1.50m wide and n. exc 1.5m depth for foundation etc and getting out in any type of soil complete all as specified and directed

Returning soil, filling in, including, spreading levelling, watering and well ramming in layers n exc 25cm.

Removing excavated material soil exc 250m and n. exc.500m and depositing where directed.

M&L for PCC 1:4:8 mix type D2 (using 40mm graded stone aggregate) in foundation, filling and mass concrete complete all as specified and directed

M&L for reinforced cement concrete M-25 (20mm garded aggregate) in Foundations, including rafts,footings, foundation beams, plinth beams,bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

Formwork to sides of concrete foundations,footings, base of columns, raft and raft beams, side and soffits of foundations ,plinth beams and similar work vertical or to batter complete all as specified and directed.

Formwork to side of columns and stanchions complete all as specified and directed.

M&L for reinforced cement concrete M-25 (20mm garded aggregate) in Columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for 10mm dia and over, TMT bars, cut to length, bent to shape required including cranking, bending spirally for hoping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Description all as per item Ser No 11.00 above but 5mm dia and over upto and including 10mm dia as in stirrups complete all as specified and directed.

Dismantling barbed wire complete all as specified and directed.

S&F in repair Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed

Dismantling concertina coil complete all as specified and directed.

S&F 600mm dia Galvanised concertina wire coil 2.50mm dia fixing to any type of standard rails/angles straining bolts, including, securing or tying at crossings with and including provision of galvanised wire (0.9mm dia) complete all as specified and directed

Dismantling of plain or corrugated steel sheeting, any gauge, thickness including Nainital or similar pattern roof covering complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S & F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering /cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

Demolition and breaking up drain pipes (Reinforced concrete) internal dia of pipe upto 450mm dia jointed in cement mortar and taking out of trenches, if required all as specified and directed.

M&L for 450 mm dia reinforced concrete hume pipes, class NP-2, laid and jointed complete with collars complete all as specified and directed.

M&L for cement concrete bed type D2 1:4:8 to drain pipes for 450mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested in complete all as specified and directed.

Demolition and breaking up drain pipes (Reinforced concrete) internal dia of pipe upto 600mm dia jointed in cement mortar and taking out of trenches, if required all as specified and directed.

M&L for 600 mm dia reinforced concrete hume pipes, class NP-2, laid and jointed complete with collars complete all as specified and directed.

M&L for cement concrete bed type D2 1:4:8 to drain pipes for 600 mm dia including packing under and completely surrounding pipes with concrete after they are laid and tested in complete all as specified and directed.

Note for all items :- If any item gets repeated in this schedule, the lowest rate quoted for those same items by the L-1 bidder shall be considered for payment and decision of Accepting Officer i.e. GE(AF) Baroda in this regard shall be final and binding.

Shiv Projects (BID ID -3211747)

Chanda Construction Co. (BID ID -3218243)

Shree Vaishno Enterprises (BID ID -3217018)

M/S TANUSHREE CONSTRUCTION COMPANY (BID ID -3216207)

ASC CONSTRUCTION (BID ID -3217980)