Providing Junction Improvement Works at Nandam Ganiraju Junction, Suruchi Junction and Tadithota Junction in RMC.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (CC Work )

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Form Work

Supplying of hot applied thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35, the material should be of BERGER Company/ BERGER Equivalent/ Equivalent brand and must comply with the following: a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade D) Adhesion : Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997 (White Colour) For Edge Lines

Supplying of hot applied colour thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35, the material should be of BERGER Company/ BERGER Equivalent/ Equivalent brand and must comply with the following: a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade D) Adhesion : Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997 and warranty is provided for up to 5 years ( Colour of any shade other than White)

Supply and application of Floor guard paints with design applications on outdoor cement concrete surfaces with heavy traffic, use a two-component solvent-free epoxy primer (minimum 100 μm DFT), followed by a high-build UV-resistant polyurethane or polyaspartic floor guard paint (minimum 150 μm DFT). Surface must be shot blasted to achieve CSP 3–5 profile and be clean, dry, and oil-free. Designs should be applied using stencils or masking techniques. Paint must exhibit abrasion resistance <100 mg loss (ASTM D4060), adhesion >3 MPa (ASTM D4541), and excellent UV/weather resistance. Slip resistance additive is optional based on project needs

Exterior walls are painted with one coat of primer and 2 coats of exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for external walls

Painting with Synthetic Enamel paints having VOC (Volatile Organic compound) content less than 50 grams/ litre - Two Coats for Old Iron Work of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911

Supply and fixing of Flexible PU Spring Post of height 750 mm, made of high-quality polyurethane material for high flexibility and durability, with pole diameter of 80 mm and base diameter of 200 mm. The post shall be provided with three (3) numbers of 3-inch (75 mm) high reflective white sleeves for 360° visibility during night and low-light conditions. The spring post shall be fixed to the ground using 3 nos. of M10 x 100 mm G.I bolts with washers, ensuring a firm and stable installation. The work includes surface preparation, drilling, fixing with bolts and washers, and all materials, labour, tools, and equipment required for proper installation, complete item as directed by the Engineer in charge

Provision of red fluorescent with white reflective sleeve traffic cone made of Low Density Polyethylene (LDPE) material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 4 kg in weight, placed at 1.5 m interval, all as per BS:873 with chain and other fixtures as necessary including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (Brick / Tile Work)

Collection and Supply of Gravel from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling,ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Supply and Fixing of CC Bollards of M30 Grade of 150mm dia and 950mm height including cost of all materials like cement, sand, water etc. and all operational & Incidental Charges etc. complete for finished item of work

Supply and fixing of Road Stud / Raised Pavement Markers (RPM) made of polycarbonate and ABS molded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30 +/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. 2 years pre-qualification warranty for field performance shall be submitted etc., complete as directed by the site engineer.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Providing RCC Grade M20 (nominal mix) with minimum Cement of 350 Kgs/ Cum of Concrete using 20mm (60%) and 10mm (40%) size graded machine crushed HBG metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials and all charges for machine mixing laying concrete, ramming in 15cm layers finishing top surface to the required level curing fo 14 days etc. complete for finished item of workas per S.S. and as directed by the Departmental Authorities for Culvert slabs & bed blocks with form work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Collection and supply of Red Earth from approved quarry including cost and conveyance of all material to work spot and spreading the same irrespective thickness including all labour charges etc., complete as per SS and as directed by the site engineer

Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., complete for finished item of work excluding cost of grass, fertilizers and chemicals etc., for 1 Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Supply & Delivery of Korean grass as per directions of officer in charge at site including cost of lawn and conveyance of all materials & labour charges etc., complete as directed by the site engineer.

Providing and applying tack coat with bitumen 80/100 grade (s-90) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Tech. specification No 503 MORTH.

Providing and laying bituminous concrete with 40-60 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading -II, premixed with bituminous binder VG30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects

Collection and Supply of Quary Rubbish / Surface Stone of Granite (CHATRU) from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing and laying of Chequered Cement Concrete, heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300x 300mm and thickness 25mm of any shades set over base coat of Cement Mortar (1:8) 12mm thick over C.C. bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sq.m & jointed neatly with white cement paste to full depth mixed with pigment of matching shades including cost of all materials like cement, sand, water and tiles etc. complete for finished item of work as per S.S. and as directed by the Departmental Authorities.

Supply and fixing of MS Grating of Size 1.0m x 1.0m of Guage Thickness 10mm on drain cover slabs for maintenane purpose including installation, transportation to work site and all labour charges etc., complete as directed by the site engineer.

Supply, Fabrication,and installation of a mild steel (MS) tapered vertical structure of 15 feet height, with 1-meter diameter at the base, narrowing to 0.5 meters at mid-height, and expanding to 4 meters at the top. Structure to be fabricated using MS plates (IS 2062 grade) of 4–6mm thickness, with internal MS ring stiffeners and vertical supports for structural integrity. All components to be precision-cut using CNC cutting technology. Includes necessary welding, surface preparation, anti-corrosion primer, and PU paint finishing. Complete in all respects as per design and engineer's instruction

Supply and installation of 12-meter high single-arm street light pole made of galvanized iron (GI), octagonal in shape, fabricated from MS sheet conforming to IS:2062 and hot-dip galvanized as per IS:2629/IS:4759. Pole shall include base plate, anchor bolts, and junction box. Suitable for wind speed up to 150 km/h. Includes mounting of 120W energy-efficient LED luminaire (IP66, PF>0.95, THD<10%) with arm bracket, wiring, and earthing. Pole shall support top-mounted luminaire with outreach arm of 1.5m. Complete assembly to be rust-resistant, weatherproof, and compliant with local electrical and safety standards for urban outdoor lighting including Electrical wiring as directed by Engineer charge.

Manufacture Supply and Erection of SS Hanging Wayfinding Signage Boards with outer frame are constructed from SS 304 grade stainless steel, offering corrosion resistance and durability. Each board measures 1200mm (W) x 600mm (H), enclosed in a 25mm x 25mm SS square pipe outer frame. The signage shall be made of 3mm thick Aluminium Composite Panel (ACP) with high-intensity prismatic reflective vinyl (Type XI) for enhanced visibility. It is suspended from traffic signal poles (typically 100mm–150mm diameter) using SS chains or clamps with anti-theft fasteners. All edges are deburred, and the finish is brushed or powder-coated. Designed to withstand wind speeds up to 150 km/h, suitable for urban traffic conditions.

Supply and Fixing of CC Bollards of M30 Grade of 150mm dia and 950mm height including cost of all materials like cement, sand, water etc. and all operational & Incidental Charges etc. complete for finished item of work

Supply and installation of 15-feet-tall decorative structure is crafted from mild steel (MS) and features a tapering, flared design resembling a basket. It consists of vertical MS fins, each 100mm wide and 6mm thick, spaced closely at 12mm at the base and widening to 150mm at the top welded circular frame attached to MS plate of 3mm thickness which serves as base for globe. A 7-foot-diameter hollow MS globe, wrapped in a vinyl map graphic, crowns the structure with inside 360 degree lighting with Motorized Rotatory equipment including Gear wheel speed control mechanism(Timer). All metal components are treated with a zinc primer and finished with PU paint for enhanced weather resistance. and also installation compraises of 10no's MS bollards of each size 150 dia x 750mm height with chain links of 8mm diameter mild steel welded links with a minimum tensile strength of 300 MPa,Finished with hot-dip galvanization or zinc primer and PU paint for corrosion resistance surrounding the structure base, evenly spaced for safety and visual framing. Engineered to withstand wind speeds up to 150 km/h, the installation is ideal for urban public spaces.The cost includes all labour charges with necessary fixtures as directed by Engineer in charge.

Manufacture Supply and Erection of SS Hanging Wayfinding Signage Boards with outer frame are constructed from SS 304 grade stainless steel, offering corrosion resistance and durability. Each board measures 1200mm (W) x 600mm (H), enclosed in a 25mm x 25mm SS square pipe outer frame. The signage shall be made of 3mm thick Aluminium Composite Panel (ACP) with high-intensity prismatic reflective vinyl (Type XI) for enhanced visibility. It is suspended from traffic signal poles (typically 100mm–150mm diameter) using SS chains or clamps with anti-theft fasteners. All edges are deburred, and the finish is brushed or powder-coated. Designed to withstand wind speeds up to 150 km/h, suitable for urban traffic conditions.

Supply and fixing of Road Stud / Raised Pavement Markers (RPM) made of polycarbonate and ABS molded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30 +/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. 2 years pre-qualification warranty for field performance shall be submitted etc., complete as directed by the site engineer.

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (CC Work )

PCC grade M20 (MORD) Providing Plain Cement Concrete Nominal Mix (1:2:4) using 20mm nominal size Graded hard stone aggregate, mechanically mixed, placed and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH. for Approaches etc. (for Mechanical Mixer) With Form Work

Supplying of hot applied thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35, the material should be of BERGER Company/ BERGER Equivalent/ Equivalent brand and must comply with the following: a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade D) Adhesion : Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997 (White Colour) For Edge Lines

Supplying of hot applied colour thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per IRC: 35, the material should be of BERGER Company/ BERGER Equivalent/ Equivalent brand and must comply with the following: a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade D) Adhesion : Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-1997 and warranty is provided for up to 5 years ( Colour of any shade other than White)

Supply and application of Floor guard paints with design applications on outdoor cement concrete surfaces with heavy traffic, use a two-component solvent-free epoxy primer (minimum 100 μm DFT), followed by a high-build UV-resistant polyurethane or polyaspartic floor guard paint (minimum 150 μm DFT). Surface must be shot blasted to achieve CSP 3–5 profile and be clean, dry, and oil-free. Designs should be applied using stencils or masking techniques. Paint must exhibit abrasion resistance <100 mg loss (ASTM D4060), adhesion >3 MPa (ASTM D4541), and excellent UV/weather resistance. Slip resistance additive is optional based on project needs

Exterior walls are painted with one coat of primer and 2 coats of exterior emulsion paint of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911 for external walls

Painting with Synthetic Enamel paints having VOC (Volatile Organic compound) content less than 50 grams/ litre - Two Coats for Old Iron Work of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidential, labour charges etc. complete for finished item of work as per SS 911

Supply and fixing of Flexible PU Spring Post of height 750 mm, made of high-quality polyurethane material for high flexibility and durability, with pole diameter of 80 mm and base diameter of 200 mm. The post shall be provided with three (3) numbers of 3-inch (75 mm) high reflective white sleeves for 360° visibility during night and low-light conditions. The spring post shall be fixed to the ground using 3 nos. of M10 x 100 mm G.I bolts with washers, ensuring a firm and stable installation. The work includes surface preparation, drilling, fixing with bolts and washers, and all materials, labour, tools, and equipment required for proper installation, complete item as directed by the Engineer in charge

Provision of red fluorescent with white reflective sleeve traffic cone made of Low Density Polyethylene (LDPE) material with a square base of 390 x 390 x 35 mm and a height of 770 mm, 4 kg in weight, placed at 1.5 m interval, all as per BS:873 with chain and other fixtures as necessary including cost and conveyance of all materials to work spot and all labour charges etc., complete as directed by the site engineer.

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (Brick / Tile Work)

Collection and Supply of Gravel from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling,ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Supply and Fixing of CC Bollards of M30 Grade of 150mm dia and 950mm height including cost of all materials like cement, sand, water etc. and all operational & Incidental Charges etc. complete for finished item of work

Supply and fixing of Road Stud / Raised Pavement Markers (RPM) made of polycarbonate and ABS molded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30 +/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. 2 years pre-qualification warranty for field performance shall be submitted etc., complete as directed by the site engineer.

Earth work excavation in all kinds of Soils for Structures as per drawing and technical specifications clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious materials and disposal upto a lead of 0.50Mtrs. Dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD/ 304 MORTH VP No. 484. For Manual Means

Providing Plain Cement concrete (1:4:8) (Cement: fine aggregate: coarse aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, excluding seigniorage charges, on all materials including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15cm layers finishing top surface to the required level curing etc. complete for finished item of work (APSS No. 402).

Providing RCC Grade M20 (nominal mix) with minimum Cement of 350 Kgs/ Cum of Concrete using 20mm (60%) and 10mm (40%) size graded machine crushed HBG metal (Coarse aggregate) from approved quarry including cost and conveyance of all materials and all charges for machine mixing laying concrete, ramming in 15cm layers finishing top surface to the required level curing fo 14 days etc. complete for finished item of workas per S.S. and as directed by the Departmental Authorities for Culvert slabs & bed blocks with form work.

Providing High Yield Strength Deformed (HYSD) / Thermo Mechanically Treated (TMT) / Mild Steel (MS) bars (Fe 415 / Fe500 grade as per IS 1786-1979) of different diameters for RCC works, including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lapsplicing with binding wire of 18SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidential, operational, labour charges such as cutting, bending, placing in position, tying etc. complete for finished item of work in all floors (APSS No. 126). etc., complete as per ss and as directed by the site engineer.

Collection and supply of Red Earth from approved quarry including cost and conveyance of all material to work spot and spreading the same irrespective thickness including all labour charges etc., complete as per SS and as directed by the site engineer

Bed preparation for Korean/Mexican: Dressing the surface to the desired shape, laying of 150 mm. (6”) thick fine red garden soil, covered with a thin layer of 10 mm thick sand, watering, rolling (compacting to 4" thickness by hand roller), including the cost of red garden soil, sand and labour charges etc., for complete bed preparation and laying and ramming of lawn mats / rolls in proper position on existing prepared bed by internal transportation from dumped place, including cost of labour for laying, ramming by hand roller / demesha, internal transportation and watering etc., complete for finished item of work excluding cost of grass, fertilizers and chemicals etc., for 1 Sqm (Red garden soil in this context it is defined as sandy loamy garden soil congenial for plant growth which shall be of light textured, crystalline, porous and friable, fertile, slightly acidic or neutral)

Supply & Delivery of Korean grass as per directions of officer in charge at site including cost of lawn and conveyance of all materials & labour charges etc., complete as directed by the site engineer.

Providing and applying tack coat with bitumen 80/100 grade (s-90) using bitumen pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom as per Tech. specification No 503 MORTH.

Providing and laying bituminous concrete with 40-60 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading -II, premixed with bituminous binder VG30 @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects

Collection and Supply of Quary Rubbish / Surface Stone of Granite (CHATRU) from approved quarry including cost and conveyance of all materials and spreading the same to irrespective thickness including sectioning, levelling ramming and watering etc. complete as per S.S. and as directed by the Site Engineer.

Providing and laying of Chequered Cement Concrete, heavy duty tiles confirming to IS:13801 using aggregates, cement, pigments of size 300x 300mm and thickness 25mm of any shades set over base coat of Cement Mortar (1:8) 12mm thick over C.C. bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sq.m & jointed neatly with white cement paste to full depth mixed with pigment of matching shades including cost of all materials like cement, sand, water and tiles etc. complete for finished item of work as per S.S. and as directed by the Departmental Authorities.

Supply and fixing of MS Grating of Size 1.0m x 1.0m of Guage Thickness 10mm on drain cover slabs for maintenane purpose including installation, transportation to work site and all labour charges etc., complete as directed by the site engineer.

Supply, Fabrication,and installation of a mild steel (MS) tapered vertical structure of 15 feet height, with 1-meter diameter at the base, narrowing to 0.5 meters at mid-height, and expanding to 4 meters at the top. Structure to be fabricated using MS plates (IS 2062 grade) of 4–6mm thickness, with internal MS ring stiffeners and vertical supports for structural integrity. All components to be precision-cut using CNC cutting technology. Includes necessary welding, surface preparation, anti-corrosion primer, and PU paint finishing. Complete in all respects as per design and engineer's instruction

Supply and installation of 12-meter high single-arm street light pole made of galvanized iron (GI), octagonal in shape, fabricated from MS sheet conforming to IS:2062 and hot-dip galvanized as per IS:2629/IS:4759. Pole shall include base plate, anchor bolts, and junction box. Suitable for wind speed up to 150 km/h. Includes mounting of 120W energy-efficient LED luminaire (IP66, PF>0.95, THD<10%) with arm bracket, wiring, and earthing. Pole shall support top-mounted luminaire with outreach arm of 1.5m. Complete assembly to be rust-resistant, weatherproof, and compliant with local electrical and safety standards for urban outdoor lighting including Electrical wiring as directed by Engineer charge.

Manufacture Supply and Erection of SS Hanging Wayfinding Signage Boards with outer frame are constructed from SS 304 grade stainless steel, offering corrosion resistance and durability. Each board measures 1200mm (W) x 600mm (H), enclosed in a 25mm x 25mm SS square pipe outer frame. The signage shall be made of 3mm thick Aluminium Composite Panel (ACP) with high-intensity prismatic reflective vinyl (Type XI) for enhanced visibility. It is suspended from traffic signal poles (typically 100mm–150mm diameter) using SS chains or clamps with anti-theft fasteners. All edges are deburred, and the finish is brushed or powder-coated. Designed to withstand wind speeds up to 150 km/h, suitable for urban traffic conditions.

Supply and Fixing of CC Bollards of M30 Grade of 150mm dia and 950mm height including cost of all materials like cement, sand, water etc. and all operational & Incidental Charges etc. complete for finished item of work

Supply and installation of 15-feet-tall decorative structure is crafted from mild steel (MS) and features a tapering, flared design resembling a basket. It consists of vertical MS fins, each 100mm wide and 6mm thick, spaced closely at 12mm at the base and widening to 150mm at the top welded circular frame attached to MS plate of 3mm thickness which serves as base for globe. A 7-foot-diameter hollow MS globe, wrapped in a vinyl map graphic, crowns the structure with inside 360 degree lighting with Motorized Rotatory equipment including Gear wheel speed control mechanism(Timer). All metal components are treated with a zinc primer and finished with PU paint for enhanced weather resistance. and also installation compraises of 10no's MS bollards of each size 150 dia x 750mm height with chain links of 8mm diameter mild steel welded links with a minimum tensile strength of 300 MPa,Finished with hot-dip galvanization or zinc primer and PU paint for corrosion resistance surrounding the structure base, evenly spaced for safety and visual framing. Engineered to withstand wind speeds up to 150 km/h, the installation is ideal for urban public spaces.The cost includes all labour charges with necessary fixtures as directed by Engineer in charge.

Manufacture Supply and Erection of SS Hanging Wayfinding Signage Boards with outer frame are constructed from SS 304 grade stainless steel, offering corrosion resistance and durability. Each board measures 1200mm (W) x 600mm (H), enclosed in a 25mm x 25mm SS square pipe outer frame. The signage shall be made of 3mm thick Aluminium Composite Panel (ACP) with high-intensity prismatic reflective vinyl (Type XI) for enhanced visibility. It is suspended from traffic signal poles (typically 100mm–150mm diameter) using SS chains or clamps with anti-theft fasteners. All edges are deburred, and the finish is brushed or powder-coated. Designed to withstand wind speeds up to 150 km/h, suitable for urban traffic conditions.

Supply and fixing of Road Stud / Raised Pavement Markers (RPM) made of polycarbonate and ABS molded body and reflective panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face and shall support a load of 16000 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category A of MORTH Circular No RW/NH/33023/10-97 – DO III Dt 11.06.1997. The height, width and length shall not exceed 50 mm, 100 mm and 100 mm and with minimum reflective area of 13 Sq.cm on each side and the slope to the base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30 +/- 2 mm) from the body is to be a minimum value of 500 Kgf. Fixing will be by drilling holes on the road for the shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer’s recommendation and complete as directed by the engineer. 2 years pre-qualification warranty for field performance shall be submitted etc., complete as directed by the site engineer.

Details of Maximum amount reimbursable to the Contractor.

1. Provision for GST @18%

2. Provision for NAC @0.10%

3. Provision for Seigniorage Charges

4. Provision for DMF 30% on Seigniorage Charges

5. Provision for Merit 2% on Seigniorage Charges