CA NO GE(N)AMB-45(P)/2020-21 REPAIRS TO JOINERY, PLUMBING, SANITARY, ROOF, PLASTERING, AND OTHER CONNECTED BLDG REPAIR WORKS IN AREA -I AND OTHER AREA IN OTM ACCN OF AGE B/R-II GE(N) AMBALA CANTT

Amount

M & L for taking down cement of cement lime plaster of any description on brick or stone walls etc including ranking out joints hacking for key scrubbing down with water etc complete all as specified and as directed by the Engineer-in-Charge.

Rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces finished even and smooth without using extra cement,complete all as specified and as directed by the Engineer-in-Charge.

Rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces finished even and smooth without using extra cement incuding ,complete all as specified and as directed by the Engineer-in-Charge.

Rendering 10 mm thick in cement mortar (1:3) on any face of ceiling or chajjas or concrete surfaces in patches not exceeding 3 sqm and finished even and smooth without using extra cement , complete all as specified and as directed by the Engineer-in-Charge.

Preparation of newly plastered or un-plastered surfaces on walls ,chajjas , roof projection , cornices etc. and applying two coats of cement based paint (white or tinted) over a coat of alkali resistant primer , complete all as specified and as directed by the Engineer-in-Charge.

Preparation of newly plastered or un-plastered surfaces on walls , cornices etc. and applying two coats of oil bound distemper with painting roller over a coat of 1-2 mm putty, complete all as specified and as directed by the Engineer-in-Charge.

Preparation of newly plastered or un-plastered surfaces on walls ,chajjas , roof projection , cornices etc. and applying two coats of white wash , complete all as specified and as directed by the Engineer-in-Charge.

M & L for Rough cast plaster over and including 10mm thick base rendering in CM (1:4) on brick or concrete surfaces complete all as specified and as directed by the Engineer-in-Charge.

S & F in repair mild steel powder coated wooden finish curtain rod 25mm dia fixed with decorative brackets ,stop roller and glass at the end etc complete all as specified and as directed by the Engineer-in-Charge.

S & F of 15mm size PVC connections with PTMP nuts of length 600mm complete all as specified and as directed by the Engineer-in-Charge.

M & L for taking up or down 20mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

M & L for taking up or down 15mm bore steel tubing and connections, including cleaning for refixing or removal to store complete all as specified and as directed by the Engineer-in-Charge.

S&F galvanised mild Steel water tubes, medium grade, ISI marked, galvanised, 15 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and as directed by the Engineer-in-Charge.

S&F galvanised mild Steel water tubes, medium grade, ISI marked, galvanised, 20 mm bore with all fittings, fixed to walls and ceiling or laid in floors complete all as specified and as directed by the Engineer-in-Charge.

S&F bib taps 15mm dia fency type brass Chromium Plated with long body screwed down for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge..Make Prayag/Parryware/Prima / cera / Essco.

S & F of fancy type Pillar Tap of 15mm bore dia, cast copper alloy, with capstan heads, chromium plated, screwed down, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and as directed by the Engineer-in-Charge. Make: Prayag/Parryware/Prima / cera/ Essco.

M & L for 75mm bore PVC (SWR) multi-floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed by the Engineer-in-Charge.

S & F of 15mm bore stop valve, fancy type, cast copper alloy, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed by the Engineer-in-Charge. Make: Prayag/Parryware/Prima / cera / Essco.

S & F brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed by the Engineer-in-Charge. Make: Prayag/Parryware/Prima / cera/ Essco.

S&F for 15 mm dia angular stop valves of chromium plated screwed down high pressure with crutch or butterfly handle complete all as specified and as directed by the Engineer-in-Charge. Prayag/Parryware/Hindware, cera/ Essco.

S&F in repair vitreous china white wash hand basin flat back white in colour with pedestal ISI marked of size 550mm x 400mm with chromium plated waste coupling and PVC waste pipe fixed to walls with CI breckets 2 Nos embedded in CM 1:4 type complete all as specified and as directed by the Engineer-in-Charge.Make: Prayag/Parryware/Hindware / cera / Neycer.

Supply and fixing in repairs PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets .Flush pipe of polyethylene of low or high density of PVC, 32 mm dia, for low level cistern. Flushing cistern and flushing pipe (exclusive of brackets), fixed in repairs complete all as specified and as direced by the Engineer-in-charge. Make: Prayag/Parryware/Hindware / cera / Neycer.

Supply and fixing in repair Vitreous China squatting pan, `Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe). Squatting pan including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor complete all as specified and as direced by the Engineer-in-charge.Make: Prayag/Parryware/Hindware / cera / Neycer.

Supply and fixing repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe).Wash down water closet (Pedestal pattern), complete all as specified and as direced by the Engineer-in-charge. Make: Prayag/Parryware/Hindware / cera / Neycer.

S&F for chromium plated toilet paper holder complete fixed to wall complete all as specified and as directed by the Engineer-in-Charge. Make: Prayag/Parryware/Prima, cera/ Essco.

S & F for galvanized mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F for stainless steel sink with out drainage board made of stainless steel 1 mm thick sheet for kitchen with waste coupling waste pipe , washer and including all necessary item including fixing to brackets and connected union to pipe complete of overall size 495 x 420 mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed by the Engineer-in-Charge. Make: Prayag/JAYANA/Neelkanth/ nirali, Blue star, (silver shine).

Supply only plastic water closet seat cover , black, white closed pattern with recessed bottom, and cover and mild steel chromium plated or aluminised hinging device, complete all as specified and as directed by the Engineer-in-Charge.Make: Prayag/Parryware/Hindware / cera / Essco.

S&F for cabinet type looking mirror size 450 mm x 600 mm box type complete all as necessary items complete all as specified and as directed by the Engineer-in-Charge. Make: Prayag,Shakti,cera, pollytaff, commander.

M & L for dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by the Engineer-in-Charge

M&L for Non Skid coloured ceramic tiles premium quility 7 to 8 mm thick,(Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match. 15mm thick screed bed in cm 1:4 all as specified and as directed by the Engineer-in charge. .Make kajaria Johnson somany, orient, cera.

do but on skirting on 10mm thick rendring in cm 1:4 Make kajaria Johnson somany, orient, complete all as specified and as directed by the Engineer-in-Charge.

M&L for glazed coloured ceramic tiles premium quility in vertical surfaces such as skirting /dados and riser to steps area of tiles 350mm x250mm x7mm/450x350x7mm thick set and jointed and pointing in white or coloured cement to match over 10 mm thick plaster in CM 1:4 complete all as specified and as directed by the Engineer-in-Charge.Make kajaria Johnson somany, orient, cera.

M&L for Double charged vitrified tiles premium quility joint free 10 mm thick (square/ rectangular) area of each tiles exc 0.36 Sqm but not exc 1 sqm in floor etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 15mm cement screed bed in CM (1:4) complete all as specified and as directed by the Engineer-in-Charge.Make kajaria Johnson somany, orient, cera.

M&L for Double charged vitrified tiles premium quility joint free 10 mm thick (square/ rectangular) cut from area of each tiles exc 0.36 Sqm but not exc 1 sqm in skirting etc set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 15mm cement screed bed in CM (1:4) complete all as specified and as directed by the Engineer-in-Charge.M ake kajaria Johnson somany, orient,cera.

M & L for 25mm thick cement concrete 1:2:4 type B-1, using 20mm graded aggregate complete all as specified and as directed by the Engineer-in-Charge.

M&L for 16 to 18 mm thick MDF board prelaminated MDF board , exterier grade (grade-1) confirming IS 14587, fixed with screws for kitchen cupboard and cabinet ,self for cupboard including hinges , brass handle and all necessary items complete all as specified and as directed by the Engineer-in-Charge.( Make-green ply, Century, Asis)

M & L for16-18mm thick granite stone (any type) on 15mm thick cement screed in cm 1:4 i directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc. 1.5 sq. m but not exc 4 sq. m each and making good the disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each and making good the disturbed surfaces complete all as specified and as directed by the Engineer-in-Charge.

Taking down shutters of any description exc 1 sq. m and not exc 2 sq. m each complete all as specified and as directed by the Engineer-in-Charge.

S&F for II class HW 35 mm thick plain framed panelled shutter( two panel) with lock rail and panel of 9 mm BWP commercial ply of 12 mm veneered particle board with commercial veneering on boths face . The size of rail and style as per IS:1003 (part-1) kiln seasoned and chemically pressure treated and making good to distrubed portion with match the existing surfaces complete all as specified and as directed by the Engineer-in-Charge.

S&F for 35 mm thick II class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass , gauze etc. (with out sash bars) ,edges or framing plain chamfered or rounded , fitted with cut and mitred beads for securing glass etc and making good distrubed portion with existing surface complete all as specified and as directed by the Engineer-in-Charge.

S & F solid PVC door frame of size 50mm x 47mm made out of 5mm prelaminated PVC sheet, reinforced with M.S. square tube and fixing in opening as per specification & drawing complete all as specified and as directed by the Engineer-in-Charge.

S&F factory made solid PVC moulded door shutters with partical board core 28 to 30 mm thick 9styles) with 2, 4, or 6 raised panel design with 2 mm thick prelaminated moulded PVC sheet on the front face and 2mm thick plain colour PVC sheet on back face fixing in frame at site as per specification and drawing complete all as specified and as directed by the Engineer-in-Charge.

M&L for repairing of all type aluminium window/door shutter with frame and refixing it after resecuring its frame work by means of tightening with new screw or by new frame ,cleats and refixing in the same opening complete all as specified and as directed by the Engineer-in-Charge.

M&L for 4.8 mm thick tinted glass fixed to aluminium frame including rubber bead complete all as specified and as directed by the Engineer-in-Charge.

S&F for framed work as in door of angle or other section with gusset plate , rails , braces, etc complete drilled for fixing of steel sheeting or other covering. Door etc, to be prepared hanging or sliding with and including either hooks and hinges or steel hanging door fitting and hanging also fastening and fixing including one shop coat of zink chromate primer paint confirming to F-410W GDe-250 A complete all as specified and as directed by the Engineer-in-Charge.

M&L PCC 1:3:6 type B-I using 20mm graded stone agg as in holdfasts,complete all as specified and as directed by the Engineer-in-Charge.

S&F for steel window box type double shutter ( glazed with wire gauge)with side hung shutters including hinges with steel handle and steel peg stay complete with glazing bar dovetailed or welded and including window guard bar, tower bolt,flat iron for fixing wire netting including one shop coat of zink chromate primer paint and making good to distrubed portion match with existing surfaces complete all as specified and as directed by the Engineer-in-Charge.

S & F 150mm aluminium handles, cast type, anodised complete all as specified and as directed by the Engineer-in-Charge.

S & F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed by the Engineer-in-Charge.

Supply and fixing for 250mm long aluminum alloy, anodized sliding bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloys to door shutter complete all as specified and as directed by the Engineer-in-Charge.

S&F Butt hinges, stainless steel medium weight 100 mm size complete all as specified and as directed by the Engineer-in-Charge.

S&F for mild steel 150 mm ordinary rat tail rod pattern springs including rollers and roller plate etc complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new surfaces of wooden of any description not other wise decribed over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by the Engineer-in-Charge.

Preparation of new surfaces of steel any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed by the Engineer-in-Charge.

S&F for 32 mm dia PVC waste pipe for wash hand basin / Kitchen sink etc complete all as specified and as directed by the Engineer-in-Charge.

S&F for chromium plated hand shower ( health faucut) with 8 mm dia 1 mtr long flexible tube and wall hook complete fixed to wall complete all as specified and as directed by the Engineer-in-Charge. Make: Prayag/Parryware/Hindware , cera.

S&F in rep counter top wash hand basin size 440x525x195 including 32 mm dia brass chromium plated waste coupling with pvc pipe as approved by Engr-in-charge/GE complete all as specified and as directed by the Engineer-in-Charge.Make: Prayag/Parryware/Hindware , cera/ Neycer.

S&F in rep Cacade duel flush EWC with inbuilt cistern including PP seat cover , hinges fixing accesseries complete fixing with all necessary items size 640x360x690 with S trap size 220 mm complete all as specified and as directed by the Engineer-in-Charge.Make: Prayag/Parryware/Hindware , cera/ Neycer.

S&F for chromium plated single lever basin mixer with out popup and 450 mm long braided hoses complete all as specified and directed by Engr-in-Charge.Make: Prayag/Parryware/Hindware , cera/ Neycer.

S&F for chromium plated concealed stop cock with wall flange complete all as specified and directed by Engr-in-Charge.Prayag/Parryware/Hindware , cera/ Neycer.

S&F for chromium plated wall mixer with hand shower arrangement with connected leg with wall flange & wall bracket for hand shower complete all as specified and directed by Engr-in-Charge..Make: Prayag/Parryware/Hindware , cera/ Neycer.

S&F for chromium plated towel ring roung complete all as specified and directed by Engr-in-Charge.Make: Prayag/Parryware/Hindware , cera/ neycer

S&F for chromium plated soap dish complete all as specified and directed by Engr-in-Charge..Make: Prayag/Parryware/Hindware , cera/ Neycer.

S&F for chromium plated overhead shower 200mmx200mm square shape single flow ABS body chrome plated with grey face plate with rubit clean system complete all as specified and directed by Engr-in-Charge. Make: Prayag/Parryware/Hindware , cera/ Neycer.

S&F for chromium plated corner glass self with bracket complete all as specified and directed by Engr-in-Charge.Make: Prayag/Parryware/Hindware , cera/ Neycer.

S & F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge

S & F 110mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge.

S & F 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed by the Engineer-in-Charge.

S & F 75mm bore PVC (SWR) bends of any radius, complete all as specified and as directed by the Engineer-in-Charge.

M & L for dismantling water tanks exc 250 but not exc 500 Litres, and removing to store complete all as specified and as directed by the Engineer-in-Charge.

M & L for dismantling water tanks exc 500 but not exc 1000 Litres, and removing to store complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for 1000 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White. Make- sintex, sheetal, polycon, diplast plasics, Vectus.

Material & Labour for 500 Litres rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top & FDA approved, tripple layer body, 100% UA stablised, rust proof) hoisted and fixed in position all as specified in SSR Part-I, complete, all as specified and as directed by the Engineer-in-Charge. Note : Water storage tank shall be White. Make- sintex, sheetal,polycon, diplast plasics, Vectus.

S&F of 20mm dia ball valves high pressure of PTMT withepoxy coated aluminium rod and high dencty plastic ball screwed for iron pipe complete, all as specified and as directed by the Engineer-in-Charge.

S & F 15 mm Gun-metal, globe or gate valves,with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed by the Engineer-in-Charge.

M & L for sheet glass 3.0mm thick, ordinary quality and glazing with oil putty in square n exc 0.5 sq m in each pane complete all as specified and as directed by the Engineer-in-Charge.

S&F stainless steel towel rack 600 mm long complete all as specified and as directed by the Engineer-in-Charge.Make: Prayag/Parryware/Hindware , cera.

Demolition of brick work built in cement or cement lime mortar complete all as specified and as directed by the Engineer-in-Charge.

M&L brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed by the Engineer-in-Charge.

M&L non skid ceramic designer Endura tiles of size 300 x 300 mm x10 mm thick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles over and including 15 mm thick screed bed or bedding layer in CM (1:4) including demolition complete all as specified and as directed by the Engineer-in-Charge. Make : ENDURA of M/S Johnson

M & L for 75mm PCC 1:4:8 Type D2 40mm graded aggregate as in sub base complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of plain or corrugated steel sheeting any gauge any thickness incl Nainital or similar pattern coverings, complete all as specified and as directed by the Engineer-in-Charge.

S & F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa "AZ 150" as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed by the Engineer-in-Charge.Make- Bhushan, tata blue scope, JSW, Aone Industries, Disco

S&F Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I S.1161-1979 grade St.-240 including dismantling incuding wooden truss scantling and purlin complete all as specified and as directed by the Engineer-in-Charge.

S & F for Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick A Z 150 of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws including dismantling complete all as specified and as directed by the Engineer-in-Charge.Make- Bhushan, tata blue scope, JSW, Aone Industries, Disco.

S&F in repair galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staple complete all as specified and as directed by the Engineer-in-Charge.

M&L for Cleaning and removing all scale and dirt,etc from PVC/RCC tanks and mouths of circulating pipe of exc 250litre and not exceeding 1000 litre capacity & writing on the tank with synthetic enamel paint not less than 70mm long and 2mm wide of words in shape like cleaned on : 15.06.2018 complete all as specified and as directed by the Engineer-in-Charge. NOTE :- Unit rate shall be included to make Small fittings such as elbow, socket, reducer, tee, union etc .

S&F in repair stainless steel fancy type peg set of 05 (05 Nos of hook in each) including fixing with steel screw and PVC rawel plug complete all as specified and as directed by the Engineer-in-Charge.

Excavating in trenches n'exc 1.5 m width and n'exc 1.5 m in depth for foundation etc n'exc 10 sqm on plan and n'exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed for sewage line etc.

M & L for concrete bed in PCC 1:3:6 type C2 (using 20 mm graded stone aggregate) to drain pipes including packing under,and haunching against the sides of pipes, after they are laid and tested for 100 mm dia (internal) PVC (SWR) pipes complete all as specified and directed (Pipes shall be measured & paid separately).

M & L 100 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed by the Engineer-in-Charge.

Returning filling in including spreading levelling and watering and well ramming in layers not exc 25 cm complete all as specified and as directed by the Engineer-in-Charge.

Removing excavated material exc 250 m but n exc 500 m distance and depositing complete all as specified and as directed by the Engineer-in-Charge.

M & L for providing PCC 1:2:4 type B1 using 20mm graded aggregate as in landings, precast cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in CM 1:4 complete with joints to match, except blocks or slabs complete all as specified and as directed by the Engineer-in-Charge.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, chajjas, staircases, landings and similar suspended work (reinforcement cut as required to facilitate demolition) complete all as specified and as directed by the Engineer-in-Charge.

M&L reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in Slabs supported on walls ,beams and columns in floors,roofs,chajjas landings, balconies,canopies, deck slabs and in shelves and the like complete (reinforcement to be measured separately).

M&L mild steel TMT bars 10 mm dia and over cut to length, bent to shape required including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed by the Engineer-in-Charge.

M&L mild steel TMT bars 6 to 8mm mm dia cut to length, bent to shape required including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed by the Engineer-in-Charge.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs landings and similar work n. exc. 200 mm thick (horizontal or sloping) and similar works rough finished surfaces of concrete.

Formwork to edges of concrete flats,treads, breaks in floors, window cills, concrete railing, openings in cocretewall floor and roofs n exc. 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n.exc. 10 cm wide rough finished surfaces of concrete, complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash over prepared surfaces of wall, pillar, cornices complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of white wash over prepared surfaces of the walls pillars, cornices etc. complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of white wash on ceiling complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash on ceiling complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of ceiling by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of distemper oil emulsion on ceiling complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper over prepared surfaces of the walls pillars, cornices etc. complete all as specified and as directed by the Engineer-in-Charge.

Preparation of old decorated brick/concrete, plastered / un--plastered surfaces of walls by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coats of oil bound distemper over prepared surfaces of walls pillars, cornices etc. complete all as specified and as directed by the Engineer-in-Charge.

Complete removal of existing treatment on walls (any number of layers) by scrapping with steel scrappers or any other means complete all as specified and as directed by the Engineer-in-Charge.

M&L for wall care putty (1 mm thick) and Preparation of surfaces complete all as specified and as directed by the Engineer-in-Charge.

M&L for Preparation of old decorated of wall two coat of plastic emulsion on interior surface of any description over 10cm girth or width, not other wise described complete all as specified and as directed by Engineer-in charge .

Preparation of old decorated brick/concrete, plastered / un plastered surfaces of walls, pillars cornices etc by brooming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of cement base paint on the walls pillars, cornices etc. complete all as specified and as directed by the Engineer-in-Charge.

M&L for applying two coat of cement base paint over a coat of alkali resistant primer on the walls pillars, cornices etc. complete all as specified and directed.

M&L for Preparation of old decorated wooden Surfaces one coat of synthetic enamel (ordinary tint) any description, not otherwise, described, over 10cm width or girth complete all as specified and as directed by Engineer-in charge .

Preparing old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling of brick tiles single layer laid on roofs etc complete all as specified and as directed by the Engineer-in-Charge.

Demolition of Mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and as directed by the Engineer-in-Charge.

Demolition, Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed by the Engineer-in-Charge.

M & L cleaning of old concrete roof by roughening picking,sweeping clean and washing down with water to remove dust etc, complete, all as specified and as directed by the Engineer-in-Charge.

M&L for brushing neat cement slurry with 3.0 kg of cement per sqm, complete all as specified and as directed by the Engineer-in-Charge.

Material & Labour for providing cement concrete 1:2:4 Type B-0 using 12.5mm graded aggregate as in roof kerbs, mud stops , padding or filling roof depressions etc, complete, all as specified and as directed by the Engineer-in-Charge.

Material & Labour for cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3, complete, all as specified and as directed by the Engineer-in-Charge

Material & Labour for roof treatment on roof for providing and laying 3mm thick APP (atactic polypropylene polymer) modified prefabricated five layer weight not less than 3.60 kg /Sqm water proofing membrane black finish reinforced with non woven polyster matt and consisting of a coat bitumious primer @ 0.40 ltr /Sqm by the same membrane manufactures of density 0.87 to 0.89 kg/ltr at 25'C temprature and viscosity 70-160 cps over the primer coat with overlap of 75mm at the at the side and 100mm at the end, the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete as per standred practice as per manufacture's instructions . The vital physical and chemical parameters of the membrane shell be under ;- (i) Joint strength in longitudinal and transverse direction at 23'C at 650/ 450 N /5 cms (ii) Tear strength in longitudinal and transverse direction at 300/250N/5 cms. Softing point of membrane not less then 150'C when tested in accordance with ASTM (d-5147) (iii) The laying of membrane shell be got down through the authorised applicator of manufactures of membrane only complete all as specified.

M & L for 40mm thick brick tiles laid over and including 15mm thick screed bed of cement mortar (1:6) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement etc complete all as specified and as directed by the Engineer-in-Charge.

All as per item No 2.27 above but except tiles, complete all as specified and as directed by the Engineer-in-Charge.

Dismantling boarding/ ceiling any discription, fixed in position complete all as specified & directed by the Engr-in-Charge.

S & F of fixing GI OREO Metal Suspended ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge. GI Metal Ceiling Lay in perforated Tegular edge global white color tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece. frame shall be same menufucture DEXUNE, Armstony, Hi-steel, Gyp board, Aerolite.

S&F 5-8mm thick Hollow profile designer PVC paneling with panel of width 250mm to 300mm fixed to wall/ceiling with screw and rawel plug including PVC beading (U,L section) wherever required, complete all as specified and as directed by the Engineer-in-Charge.

S&F Aluminium powder coated door . including frame with centrally locking arrangement with lock make of ‘GODREJ’ or ‘LINK’ 7 lever and self closing device with rebate including jointing cleats, fixing of builders hardware fittings, necessary numbers of floor including necessary fittings, fixtures & aluminium snap beads complete. Note- Glass shall be measured sepratetly, complete all as specified and as directed by the Engineer-in-Charge.

S&F aluminium powder coated windows and ventilator including frame , rubber/aluminium beading for securing glass, 02 Nos aluminium anodised handles 125mm size, including 02 Nos tower bolt aluminium anodized 200mm size and glazing clips 75mm size extruded aluminium alloy butt hinges as required as per area of shutteromplete all as specified and directed. Note- Glass shall be measured sepratetly

S&F aluminium chequered grill powder coated with aluminium anodized of diamond shape with 6 mm dia wires and mesh of size 75 x 75 mm in aluminium 'Y' channel and aluminium flat 25 mm wide fixed with aluminium screws complete all as specified and as directed by the Engineer-in-Charge.

S&F Sheet glass 4 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and as directed by the Engineer-in-Charge.

S&F in aluminium (Diecast) body hydraulically door closer regulated,designation No.3, universal type,suitable for door shutters of 851 mm to 1000 mm in width and weight between 61 to 80 Kg complete all as specified and directed. Make- Everest, Universal, Godrej, Sandu, Amar.

M&L Double action floor spring hydraulically regulated made up minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover governing pivot made of brass , other parts made of mild steel heavy duty and fixed. Make- Everest, Universal, Godrej, Sandu, Amar.

Swami Enterprises

M/S SHANTI CONSTRUCTION

Sham Sunder Bansal