Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L-1₹5.1 LAccepted-Finance | ₹5.1 L | L-1 | Accepted-Finance Lowest-1 |
| 2 | L-2₹5.3 L+₹20,585 (4.01%)Rejected-Finance | ₹5.3 L+₹20,585 (4.01%) | L-2 | Rejected-Finance Lowest-2 |
| 3 | L-3₹6.5 L+₹1.3 L (26.2%)Rejected-Finance LOWER BAZAR SARKAGHAT DISTT MANDI H P | ₹6.5 L+₹1.3 L (26.2%) | L-3 | Rejected-Finance Lowest-3 |
| 4 | L-4₹7.0 L+₹1.8 L (35.6%)Rejected-Finance HAMIRPUR ROAD NEAR BUS STAND UNA DISTT UNA HP | UNA | HIMACHAL PRADESH | 174301 | ₹7.0 L+₹1.8 L (35.6%) | L-4 | Rejected-Finance Lowest-4 |
| Sl No | Description | Qty | Unit | SS ENGINEERING WORKS L4 | M/S Anil Trading And Engineering Works L3 | KIRAN L1 | Lekh Ram L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation, trenches (for pipes & pits) up to all depths in all classification of earth work such as pick work, jumper work,saturated soil including blasting soft/hard rock or chiseling soft/hard rock where blasting is prohibited in all lifts including trimming & dressing of sides, levelling of beds to correct grade i/c shoring, strutting, planking, timbering wherever required, stacking the useable or unuseable material/ soil separately & after excavated soil clear from the edge of excavation returning the excavated soil after laying, jointing, testing of pipes in trenches in 15 Cm layers including consolidating of each deposited layer by ramming & watering & then disposing of all surplus excavated soil/unusable material as directed with in all leads & lifts including restoration of unmetalled surfaces to its original condition & including cost of diversion for traffic,night signals, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respect with in all leads & lifts as per the entire satisfaction & directions of Engineer- in- Charge. | 470.4 | Cum | 235 ₹1,10,544 Lowest | 299 ₹1,40,649.6 | 360 ₹1,69,344 | 380 ₹1,78,752 |
| 2.00Laying, Jointing, testing in trenches (including carriage) to be levelled to grades, IS marked GMS flanged pipes (Heavy Class) of following diameters conforming to IS 1239-1991 (Part-II) (latest with upto date ammendments) having minimum wall thickness as for class of pipe specified below jointed with flanges conforming to tables as specified below of BIS 6392-1971 (latest with up to date ammendments) welded at both ends according to relevant BIS standards and detailed specifications as appended in NIT & provided with nuts & bolts of required sizes, 3mm thick compressed asbestos fiber gasket of synthetic rubber gasket conforming to relevant BIS codes as given in technical specifications including all leads and lifts, flanged short pieces, bends, tees, and other specials etc. made from parent tubes including bends & welded with flanges of tables as aplicable for the particular reach & of technical specifications appended in the NIT as per site conditions including flushing cleaning & hydraulic testing complete in all respects with in all leads & lifts as per directions and entire satisfaction of the Engineer-in-Charge. (Earth work to be measured and paid separately). | |||||||
| 2.01 | 50 mm dia (HC) Table-28 | 75 | Rmt | 70 ₹5,250 Lowest | 350 ₹26,250 | 399 ₹29,925 | 430 ₹32,250 |
| 2.02 | 50 mm dia (HC) Table-5 | 24 | Rmt | 60 ₹1,440 Lowest | 230 ₹5,520 | 260 ₹6,240 | 300 ₹7,200 |
| 3.00Laying, Jointing, testing in trenches (including carriage) to be levelled to grades, IS marked GMS pipes (Medium Grade) of following diameters conforming to IS 1239-1991 (Part-II) (latest with upto date ammendments) including Butt welding in three layers at both the ends to make water tight joint including carriage of material upto all leads and lifts. This work also includes fabrication of short pieces and bends, tees & other specials etc. made from parent tubes with butt welding in three layers as applicable for the particular reach & of technical specifications as per site conditions including flushing, cleaning Hydraulic testing complete to the best satisfaction of Engineer-in-Charge. The laying of pipe shall confirm to IS: 5822-1994 and as per CPHEEO manual. The rates also include the carriage of GMS tubes from the JSV Divisional store Baggi to the site of work, butt welding of parent tube, fabrication of short pieces, bends, tees & other specials etc.from parent tubes, flushing , cleaning & hydraulic testing complete in all respects with in all leads & lifts as per directions and entire satisfaction of the Engineer-in-Charge. (Earth work to be measured and paid separately). | |||||||
| 3.01 | 50 mm dia (MC) | 931 | Rmt | 175 ₹1,62,925 | 115 ₹1,07,065 | 78 ₹72,618 Lowest | 80 ₹74,480 |
| 4.00 | Providing, installation, testing and commissioning of Submersible pump (to be installed in 8" bore) of Kirloskar/ KSB/ Crompton/ BE make or any other make approved by JSV for 1.50 LPS discharge for 185 meter total head conforming to latest relevant BIS code. The pump should be fitted with free flow impellers of suitable alloy as per BIS 5659-1970 latest suitable for clear water having greased packer bearing and shaft with bound stator on motor side & with shaft protection sleeve on pump side ensuring better life for shaft conforming to BIS specifications. The pump shall be directly coupled to a submersible squirrel cage electric induction motor of same make as of pump conforming to relevant BIS code latest with upto date ammendments totally dust & water proof for submersible duty isolated from the pump by intermediate casing with double mechnical seal in oil chamber & grease packed lubricated bearing & provided with stainless steel thrust bearing plate to withstand non vertical loads with minimum wear & tear. It should also be fitted with a device to take up expansion of water with heating of motor. The pump set should include water level guard errection clamps, cable clips & depth gauge etc. & suitable for operation on data given below:- | 2 | Set | 85,000 ₹1,70,000 | 89,000 ₹1,78,000 | 75,000 ₹1,50,000 Lowest | 75,000 ₹1,50,000 Lowest |
| 4.01A) Site Conditions:- Location of site- About 5 Kms. from Chakkar(with zero head load), The altitude of place in which the motor is intended to work in ordinary service if it exceeds 1000 mtrs = 860 m above MSL. Detail of quality of water- clear cold water. Water free from sand or not-Yes. Water corrosive or not- No.Turbidity- Clear cold water. No. of working hours per day - 8 Hours. Pumps:- BIS 1520-1980,read with BIS 9137-1978 both latest with upto date ammendments. Nos of pumps reqd.- 2 Nos. pumps ( one will act as stand by). Pump Operating Conditions:- Capacity-1.50 LPS. Total head in Mts.-185 Mtrs.(If total head in not known then following details be provided): Static Head- 160 Mtrs. Minimum depth of water-………….Mtrs. Variation in water level.-………….Mtrs. Ground level to max. water level- Mtrs. Ground level to delivery point- .Mtrs. Pressure in the suction tank-…………..Kg/cm/2. Pressure in the delivery tank-…………..Kg/cm/2. Length of R/main-980 mtrs. Dia of R/main-65 mm Dia (MC). No. of working hours per day - 8 Hours. | |||||||
| 5.00 | Supply of prefabricated control panel of Havells/C&S make suitable for above pump set fitted with Ammeter, Voltmeter, MCB, fully automatic Star Delta starter, indicating lamps, ON/OFF push button, single phase preventor, phase sequence relay complete with internal copper wiring. | 1 | set | 24,500 ₹24,500 | 15,000 ₹15,000 | 12,000 ₹12,000 Lowest | 12,500 ₹12,500 |
| 6.00 | Providing and fixing MS angle iron frame complete with steel sheet fabricated enclosures for housing of three phase energy meter as well as control panel and ICTP switch, ELCB, shunt capacitor, Kit Kat etc. for operating complete having door on front with locking arrangement from front side complete in all respect in all leads and lifts. | 1 | set | 7,500 ₹7,500 | 5,000 ₹5,000 Lowest | 9,000 ₹9,000 | 9,100 ₹9,100 |
Tender Value
₹7.0 L
EMD Value
₹14,100
Closing Date
8 Apr 2026, 10:00 amClosed
EE
Executive Engineer JS Division Baggi Distt. Mandi H.P.
as per BOQ
2026_HPIPH_132803_1
EE-JSD-BGI/2026- 33404-54 dt. 28/03/2026
Open Tender
Civil Works
Item Rate
90 days
Baggi
as per NIT
7 documents required · 7 mandatory
₹350
₹14,100
21 Jul 2026
30 Mar 2026
8 Apr 2026
30 Mar 2026
8 Apr 2026
30 Mar 2026
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.47 MB
BOQ_196379.xls
BOQ • 2.02 MB
FORM_6.pdf
Tender Documents • 0.42 MB
TC.pdf
Tender Documents • 0.06 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .