CA NO.CWE BLY/GE (W) /53 OF 2024- 2025ADDN/ALTN CUM SPECIAL REPAIRS TO BLDG HQ CE BAREILLY ZONE OFFICE AT BAREILLY CANTT UNDER GE (WEST) BAREILLY

Amount

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc at any hight upto 15m including necessary scafolding, shuttering or formwork etc complete as directed and specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete as directed and specified.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc 15 cm thickness (below or above ground level) at any storey complete all as specified and as directed.

Demolition of cement Concrete of any description and in any position not otherwise specifically provided for roof etc at any hight upto 15m complete all as specified and as directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) exc 1.50 sqm but n.exc 4.0 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down Chowkats or frames with shutters (without taking off shutters from the frame) n.exc 1.50 sqm each and removing from site including making good disturbed portions of wall with new or old bricks, lintel, cills etc in CM 1:4 complete all as specified and directed.

Taking down Shutters of any description exc 1 Sqm and n exc 2 Sqm each and removing from site including making good disturbed portions complete all as specified and directed.

M&L brick work with fly ash bricks (old size) conforming to IS 12894 -2002 specification straight or curved on plan exc 6 m mean radius built in CM (1:6) including demolition of exiting work complete all as specified and directed

M&L for 15mm thick rendering on internal surface in cement mortar 1:6 to on brick masonary wall surfaces or on other than fair faces of brick masonary finished even and fair without using extra cement at any hieght up 15m with necessary scafolding etc complete all as specified and directed.

M & L for 15 mm thick rendering in two layers on external surface on fair faces of brick work or concrete surfaces in two layers consisting of Ist layer 10 mm thick in C M 1:6 and top layer 5 mm thick in C M 1:4 mix with water proofing compound as per manufacturer's instruction which ever is more at any height up 15m with and including necessary scafolding etc complete all as specified and directed.( Note:- Water proofing copound shall be measured and paid separately).

Supply only liquid water proofing compound conforming to IS specification complete all as specified and directed.

M&L for rendering 5 mm thick in CM 1:3 as on concerete surface on ceilings finished even and smooth without using extra cement at any floor complete all as specified and directed.

Dismantling of concrete by chiseling from RCC members like column , beam, parapet facia, chajja, ceiling,etc exposing the reinforcement without disturbing the reinforcement free from rust by sand blasting/using chemical, apply a coat of rustolin to remove rust and acralic polymer on old rusted reinforcement proving at places addl reinforcement welding with existing reinforcement as directed wherever required binding RCC 50 mmx 50 mm (10 mm gauge welded mesh ) & tack , securing with clips / linding wire, welding & provision guniting pressure 2.2 to 2.5 kg /sqm with admixer 1 cement 3.5 of sand of thickness 25 to 40 mm including stripping floating with wooden strippers for proper dimension control neccssary form work & scaffolding up to four storey height upto 15m and including height of head room complete surface of guniting to be finished fair with average thickness 15 mm thick plaster in cement mortar 1:4 with water proofing compound @ 200 ml every 50 kg of cement and applying two coat of Dr fixit /pidilite new coat ezee at interval of 8 hours cure for the surfaces at any height up 15m with necessary scafolding etc complete all as specified and directed.

M&L for two coat OBD on newly plastered wall surface with airless electric sprayers over a coat of primer applied using airless electric sprayers over and including one coat of wall care putty of 1mm thickness complete all as specified and directed. (Note-Application to be done through authorised applicator of manufacturer)

M&L for complete removal of existing treatment on wall by scrapping with mechanical sander (having mechanical vaccum mechanism ) with sanding pad of appropriate grit to make surface clean ,free from dust ,loose paint etc by skilled labour and applying two coat OBD on wall with airless electric sprayers over a coat of primer applied using airless electric sprayer over and including 1mm thick wall care putty complete all as specified and directed. (Note:-Application to be done through authorised applicator of manufacturer.)

M&L applying two coat of 1.5mm thick white putty on new surface and applying one coat of exterior water based primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by jpaint manufacturer and as mentioned in PS and accessories fpr applying distemper, should be able to spray in hard to reach areas and penetration of distemper, on the surface to achieve excllent application using limited manpower at anyhight upto 15m with necessary scafolding and safety measure are inclusive in the rates complete all as specified and directed.

M&L for complete removal of existing treatment, preparation of old decorated plastered or unplastered surfaces of walls / roof projections including facia, cornices etc. and applying two coat of 1.5mm thick white putty and applying one coat of primer by using Airless spray techonology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr, the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressue and paint usage and certified by paint manufacturer and accessories for applying Primer, should be able to spray in hard to reach areas and penetration of Primer, on the surface to achieve excllent application using limited manpower at any hight upto 15m with necessary scafolding and safety measure are inclusive in the rates complete all as specified and directed. (Note : - Sanding of old decorated surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer).

M&L for applying two coat of exterior weather proof 100% anti fungal acrylic smooth emulsion with silicon additives that offer anti algae high performance exterior wall finish applied by using Airless spray technology with max working pressure of 3300 PPSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacture with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying exterior weather proof paint, should be able to spray in hard to reach areas and penetration of exterior weather proof paint on the surface to achieve excellent application using limited manpower at any hight upto 15m with necessary scafolding and safety measure are inclusive in the rates complete all as specified and directed.

M&L for applying 1.5 mm thick layer of wall care putty on external and internal wall surfaces incl rubbing down the surfaces with sand paper after getting dried all as directed to obtain a smooth & even surface at any hight upto 15m complete all as spd and directed.

M&L for preparing new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and directed.

M&L for preparing old plastered surfaces and applying two coats of white wash on ceiling complete all as specified and directed.

M & L applying two coat of cement based paint on any decorated or undecorated wall including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces complete all as specified.

M & L for applying two coat of acrylic emulsion paint white or tinted over one coat of primer on old decorated ceiling surface including preparation of surfaces by washing rubbing down and stoping of distempered and painted surfaces at any storey complete all as specified and directed.

M&L for Vitrified double charged coloured marble finish designer tiles including border ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles min 600x1200mm in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement over and including 15mm thick screed bed 1:6 cement motar at any storey of bladg complete all as specified and directed.

All as per serial item 24 above but as in vertical surfaces in dato/skirting or steps etc over and including rendering 10 mm thick in cement mortar 1:4, as in backing layer complete all as specified.

M&L for Anti-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exc. 0.38 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick bedding layer of cement mortar 1:6 at any storey of bldg complete all as specified and directed.

M&L for non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exc 0.38 sqm, in wall , skirting & dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick plastering of cement mortar 1:6 at any storey of bldg complete all as specified and directed.

M&L for 7 to 8 mm thick (Glazed ceramic tiles in vertical surface 600X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match on vertical surface etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering / backing layer in cement mortar 1:4 at any storey of bldg complete all as specified and directed.

M&L for 20mm thick Granite (colour as approved by accepting officer ) machine cut and machine, polished,and moulding, window cills, riser of steps and urinal partition wash basin platforms and flooring, skirting/ dados like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of marble laid over cement screed and jointed with grey cement slurry mixed with pigment to match including rubbing & mirror polishing over and inclucding 10mm thick cement plaster on brick surfaces or concrete surface in cm (1:4) finished even and rough as screed complete all as spd and directed.

M&L for 75 mm thick cement concrete 1:3:6, type C1 (using 20 mm graded stone aggregate) in floor/plinth protection, finish the surface even and smooth without using extra cement including forming necessary joints 12 mm wide to the full depth of PCC at every 3 mtr and every change of direction and filling the same with bitumen filler/filler boards 1:3 by weight complete all as specified and directed.

M&L Form work to soffits of suspended slabs flat surface of concrete finished rough surfaces of concrete not exceeding 200mm thick,complete all as specified and directed.

S&F TMT bars 5mm and over upto and including 10mm dia in stirrups, spacers and binders bent to shape required,including binding with mild steel wire (annealed) not less than .9mm dia.

M&L for TMT Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M&L for RCC 1:1.5:3 type B1 (using 20 mm graded stone aggregate) as in slab supported on wall, beams and columuns in floors, roofs, shelves, Chajjas and stair case etc complete all as specified and directed.

M & L for 25 mm thick PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregrate laid over roof slab where required / directed after applying cement slurry for filling undulationations/ level course finished even and smooth without using extra cement mis with water proofing compound as per manufacture instruction complete all as spd and directed.

M&L for screed bed or bedding layer of mortar, 10 mm thick, in cement mortar 1:3, over RCC roof slabs for laying water proofing treatment mixed with using water proofing liquid @ 150 ml per bag of cement including application of cement slurry over existing roof surface @ 3 Kg/Sqm complete all as specified and directed. (Note:- Water proofing liquid shall be measured and paid separately).

S&F Pressed steel frames of size 105mmx60mm(using 1.25 mm thick PBI sheet) for door with one or more rebates including filling and compaction with PCC (1:3:6) Type C-1 (using 20 mm graded stone aggregate) necessary fixing lugs, hinges, lock strike plate, etc, including wooden texture finished paint on the frame surface complete all as specified and directed.

S&F mild steel framed work such as grills grating etc with ends of bars shouldered and/or riveted or forged into spikes framed guard bars, barrel iron doors ladders framed balusters walk ways railing frame work of water tanks and similar work confirming to Fe -290 Gde-E-165 all as spd and directed .

S&F suspended false ceiling using Desiner E-grid 2430, 180 GSM (exposed ceiling suspension system ) of grid size 600mmx600 mm with main runner 38 mm x 24 mm and wall angle 24mm x 24mm using 4mm thick High Pressure stean Crude Everest Non Asbestos Fiber Cement plain Board (E-Board Classic) in & including a grid of GI system duly suspended with 4mm dia GI wire hanger fixed with providing positions for light fixtures,air conditioning diffuser and ducts ,sprinkler ,smoke detectors etc.The main runners to be secured to structural soffits by hanger @ 1220 mm maximum c/c. the last hanger at the end of each main runner should not be placed at more than 450mm from the adjucent wall,Flush fitting 1220 mm cross tee to be interlocked between main runners @ 610mm c/c,so as to form 600mm x 600 mm grid incl taking down old ceiling with frame and making good disturbed surface complete all as specified and directed .

M&L POP (Plaster of Paris) false ceiling applying 10 to 12 mm thick POP finish over ceiling surfaces with wall care putty mixed with POP powder in ratio of 1:10 (a) PGI sheet of 26 gauge in angle shape of size 25 x 25 mm all around the wall complete. (b) Main runners of 26 gauge PGI sheet in angle shape of size 35 x 25 mm at the interval of 90 cm centre to centre complete. complete including one dome not less than 1 metre dia and frame work complete all as described below : (c) Cross runners of 26 gauge PGI sheet in angle shape of size 35 x 25 mm at 40 cm center to center complete. (d) Suspender/ hanger of 26 gauge of PGI sheets in angle shape of size 25 x 25 mm fixed to soffits of roof by steel fastener complete.Including Dismantling of plaster of paris ceiling (Gypsum anhydrous) to flat surface including frame work and G.I. wire mesh complete all as specified and directed.

M&L Making POP cornices 75/100 mm wide of required design as directed complete all as specified and directed.

M&L Making POP Dome design ( dia exc 90 cm but n.exc 210 cm) of required design as directed complete all as specified and directed.

S&F for 35 mm thick factory made wooden Flush door shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed .

M&L for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm coloured PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing

M&L for factory made solid panel PVC door flush shutter 30 mm thick (style) consisting of frame made out of plain pvc sheet. Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing.

M&L for 5mm thick solid Prelam coloured PVC sheet in strips & channel feathered at the edges for fixing on Solid PVC Wall Lining, Insulated PVC Wall Lining, and Solid PVC Partitions inclusive of Solvent Cement/adhessive and fixing at site including 5mm thick sheet fillet of width 35mm for wall peneling inclusive fixing on the wall to make pvc frame as per speficifaction and dwadings including taking down old wall panneling complete all as specified and directed.

Demolition of cement concrete is reinforced (reinforcement cut as required to facilitate demolition) Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work and similar suspended work complete all as specified and directed.

S&F Steel framed work with hollow MS tubular section including special shaped washer etc. complete using induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 , (Fe 410-w gde E-250) complete all as specified and directed.

M&L for 3-4mm thick ACP sheet of any approved colour one side covered with retro-reflective sheet cut to size including necessary fixing arrangement in GI frame 75x45mm ad cleat of requiured size fixed to wall or appriate size including filling of sealant and necessary scafolding, shuttering etc for height upto 15 mtr etc complete all as specified and directed

S&F powder coated aluminium sliding windows three track frame with movable shutter ( sliding on minimum two PVC roller of best quality) for each shutter on three tracks with stainless steel mosquito proofing and glazing shutter and incl 5.50 mm thick tinted glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below, and following items deemed shall be included- (i) Window frame :68.4x38mm X 1.15 mm thick for three tracks. (ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over (iii) Aluminium beading - 0.7mm thick (iv) Aluminium grill with Bulb height 4.5 mm square shape fixed on frame including necessary fixing arrangement like U-clip, flat Aluminium section maching with window & dia of grill as directed by Engr-in-Charge. (v) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete. (vi) Aluminium fittings such aluminium suitable handle with auto interlock cap with suitable size . (vii) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed.

S&F powder coated aluminium frame for doors,windows, ventilators & cubical Partition with one or more rebates including joining cleat for fixing etc (minimum thickness of powder coating 50 micron) complete all as specified and directed. ( Shape and size of section will be approved by GE/ comp auth) (Note :- Cost of rubber and required accessories shall be included in the rate of item and shall not be paid extra).

S&F for powder coated aluminium door, window and ventilator shutters, (minimum thickness of powder coating 50 micron)side/top hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) each shutter complete all as specified and directed.

S&F for powder coated aluminium partiton aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings required for fixing complete all as specified and directed. (Note : Cost of rubber beading and required accessories shall be included in the rate of item and will not be paid extra).

M&L for 6mm thick bakelite sheet prelaminated both side with decorative choice lamination work complete all as specified and directed.

S&F Tinted sheet glass 5.50 , pin head type in squares exc 0.5 sq. m in each pane in Aluminium window,door and partition wall complete all as specified and directed

S&F Tinted sheet glass 5.50 , pin head type in squares n exc 0.5 sq. m in each pane in Aluminium window,door and partition wall complete all as specified and directed

S & fixed aluminium extruded section body Door closer hydralically regulated, designation No. 3, universal type, suitablebfor door shutters of 851 to 1000 mm in widthand of weight between 61 to 80 kg and fixed complete all as spd & directed

S & fixed Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as spd & directed

M&L for preparation of old wooden surfaces hand rail of railing of any description over 10cm width or girth and applying two coats of french polish complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description over 10cm width or girth and applyingne two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and apply two coat of synthetic enamel paint over coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and directed.

S & F in replacements 150 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all specified and as directed.

S&F 150 mm size aluminium handles, cast type anodised completed all as specified and directed.

S&F stainless steel butt hinges 100mm size cold rolled medium weight and fixed complete all as specified and directed.

S&F 250 mm long aluminium sliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed.

S & F 1000 ltrs capacity rotational moulded polythylene triple layered water storage tanks white in colour (cylindrical vertical with closed top) hoisted and fixed in position including dismalting of existing tank/ demolition of RCC water storage tank of capacity and any description all as specified in SSR Part I complete all as specified and directed.

S&F 20mm bore Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 2 0 m m - 2 1 0 g m s . / 25mm-455gms/ 40mm - 690 gms) high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in replacement of 20 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

S & F in replacement of 15 mm bore gunmetal globe or gate valve, with iron wheel head, screwed both ends for iron pipe omplete all as specified and directed.

S&F GI tubing of 15 mm dia, medium grade with all fittings and fixed to walls or ceiling (concealed) or laid in floors including taking up or down and cutting chessing etc old 15 mm steel tubing and connections complete all as specified and directed.

S&F GI tubing of 20 mm dia, medium grade with all fittings and fixed to walls or ceiling (concealed) or laid in floors including taking up or down old and cutting chessing etc 20 mm steel tubing and connectionscomplete all as specified and directed.

S&F vitreous chinaware coloured wash hand basin with padestal of size 55X40X82cm complete including CP Waste coupling of 32mm dia ,waste pipe CP fancy pillar tap,complete fixing arrangement and cutting for and pinning in walls & making good complete all as specifed and directed. Make Jaquar FLS-WHT-5801/ Kohler K-24562/Grohe-P04-PAR-C042MIC

S&F in replacement Vitreous China table/counter top wash basin of suitable size (min 550x400mm) including SS bottle trap and cabinet of PVC shutter fixing on counter with SS waste coupling complete all as specified and as directed. Make Jaquar FLS-WHT-5935/Kohler SKU 28784 & 32485 /Grohe-39216000,

S&F fancy type 15 mm bore brass chromium plated WHB mixer for mixing hot and cold water screwed down for iron pipe and fixed to WHB complete all as specified and directed. Make Jaquar CQT-23167B/ Kohler K-8620-IN-CP /Grohe-32734000,

S&F for Vitreous china premium/ 1st quality wash down water closet Single Piece EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc complete in all respect all as specified as directed. Make Jaquar FLS-WHT-5353PPZ/Kohler K-17629 T-NS-O/Grohe-39075001.

S&F in replacement Vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device with flush pipe to pedestal Pan including all joints complete all as specified and directed. Make Jaquar CNS-wht-551SSPP/CERA-S1053101/Hindware-20044.

S&F in replacement vitrous china sqatting pan 'orissa pattern size 580x440mm white with integral foot rest imcluding lime concrete bedding & 10 Ltrs capacity PVC valveless syphnic action type flushing cistern low level white with inlet ball valve float and handle including brackets & PVC waste pipe 32 mm dia & connection complete all as specified and directed. Make CERA-2071/Parryware-C0131/Hindware-20140.

M&L water proofing treatment to RCC sunken slab as specified and directed as under:- (a) Cleaning the existing RCC sunken slab and vertical wall/RCC beam and hacking the surface. (b) 15mm thick plastering over the floor & vertical surface in CM 1:4, mixed with liquid water proofing compound @ 200ml per 50 kg of cement trowelled to even and smooth finish without using extra cement .(Water proofing compound shall be measured and paid separately). (c ) filling the sunken portion with water for 72 hrs and carring out the ponding test.(Any leakage /seapage noticed shall be repaired). (d) Applying two coats of elastomaric acrylic water proof coating Make: Dr. Fixit of pidiproof LW+ or equivalent per sqm in each coat with roller application.(Note: Each coat of elastomaric acrylic compound requires 6-8hrs to dry up itself second coat shall be applied on getting the first coat completely dried up.)

S&F vitreous china full stall urinal white, with grating and union for discharge pipe including waste pipe of polythelene of low or high density or PVC 32mm dia complete all as specified and directed. Make Jaquar- URS-WHT-13261H, Kohlelr K-4991-ET-O/Gorhe -39438000.

S&F in replacement fancy type brass chromium plated toilet paper holder, complete all as specified and as directed. Make Jaquar CAN-11535/Kohler K-5633-IN-CP/Grohe -40367001/Approved make & Sample by GE.

S&F 15 mm bore Bib cock with wall flange and aerator,brass chromium plated with fancy type and screwed down to 15mm bore GI tubing or for brass ferulecomplete all as specified and as directed. Make Jaquar CON-047KN/ Kohler K-16093 IN-4-CP/Grohe-20280000.

S&F in replacement 15 mm dia bore PVC connection with PTMT nuts of length 450 mm complete all as specified and directed.

S&F in replacement fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed. Make Jaquar ACN1131N / Kohler K-5634-IN-CP / Grohe- 40754001.

S&F Stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch , screwed both ends for iron pipe or for unions and of size 15 mm bore complete all as specified and as directed. Make Jaquar CON-059KN/Kohler K-11568 IN-7B-CP/Grohe-2201700m .

S&F fancy type stainless steel brass chromium plated towel rail size 600mm long including a pair of brass bracket complete all as specified and directed. Make Jaquar (CAN-1111SM) / Kohler K-25348IN-AF / Grohe -40366001.

S & F in replacement fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed. Make Jaquar CPA-chr-1171/Kohler K-5636-IN-CP/Grohe-40799001

S&F PVC low level cistern 10 Ltr capacity with inlet ball valve, float and handle incl bracket and flush pvc pipe of low or high density or PVC 32 mm dia for low level cistern complete all as specified and directed. Make Cera-2603/Kohler K-20440219955/ Hindware-12927719891.

S&F health faucet 1 mtr SS Braided connection tube with wall hook complete for EWC incl necessary fitting complete all as specified and directed. Make Jaquar ALS-565/Kohler K-77364-IN-CP/Grohe-26355110.

S&F Grating round 140 mm size of PTMT (Minimum weight 50gms ) complete all as specified and as directed.

S&F in replacement PVC (SWR) 110 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting including dismantling of old cast iron/ PVC /AC /SGSW pipes alongwith fittings and accessories complete all as specified and as directed.

S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 110 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with acessible door any radius complete all as specified and directed.

S&F PVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floor with necessary fitting including dismantling of old pipes any type/size alongwith fittings and accessories complete all as specified and as directed.

S&F 75 mm bore PVC (SWR) bends any radius complete all as specified and directed.

S&F 75 mm bore PVC (SWR) branch piece, single (single Y) equal or unequal with acessible door any radius complete all as specified and directed.

S&F crystal glass mosaic swimming pool tiles glossy finished of size 450x350mmx7mm thick over and including 10mm thick rendering in CM 1:3 including taking down existing old tiles complete all as specified and directed.

S&F crystal glass mosaic swimming pool tiles glossy finished of size 300x300mmx8mm thick over and including 15mm thick screed bed in CM 1:4 including taking down existing old tiles complete all as specified and directed.

Material & Labour for providing and fixing stainless steel (Grade 304) railing, handles etc made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.

S & F brass rebated mortice lock, vertical type, size75 mm with 4 llivers complete all as specificed and directed

S&F in replacement 20 mm dia SS 1.0 mm thick fancy type droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate size in each end & intermediate support complete all as specified and directed.

Taking down carefully unserviceable copper/aluminium point wiring (Light, fan, socket or power) complete including unserviceable fittings and fixtures such as switches, ceiling roses, pendents, regulators, sockets, lamp holders, brackets, except ceiling fittings, bulk head fittings, tube light fittings etc. and making good the disturbed surfaces of walls, floors, etc. complete all as specified and directed.

Taking out old sub main copper/aluminium cable off various sizes from existing conduit/ batten complete.

Taking down old MCB DBs TPN /MCB DBsSPN / main switches and AC sockets of any size and capacity complete all as specified and directed

M&L for wiring with and including multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit not less than of 20mm bore and including cutting chases for conduits and modular MS Box , its accessories modular metal flush box,, cover platate and frame & including with multi stranded copper conductor 1.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed for the following :- (a) One light/fan point controlled by one switch

(b) One 3 pin, 5/6 Amps, socket outlet on the same board, controlled by another switch.

(c) One multi pin socket outlet, 5/6 Amps, on Independent board.

(d) One point controlled by bell push

M&L for wiring with and including multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number, drawing through in and including medium grade, rigid non metallic, PVC concealed conduit conduit not less than of 20mm bore and including cutting chases for conduits and sinkings for boxes, its accessories and also suitable for modular switches and sockets and cover platate & including with multi stranded copper conductor 2.5 Sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed, FRLSH cable, 1100 volts grade, ISI marked with valid CML number as continuity earth wire terminating with new sunken concealed terminal boxes complete all as specified and directed.

S & F Modular switch one way 16 A, 1 Module complete all as specified and directed .

S & F Modular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed.

S & F Modular switch one way 6 A, 1 Module complete all as specified and directed.

S & F Modular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed.

S & F Modular bell push 6 Amp, 1 Module complete all as specified and directed.

S & F Modular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed.

S&F, ceiling rose, 3 terminal , any shade, of PVC/Polycarbonate, isolated body complete all as specified and directed

S&F call bell complete all as specified and directed

S&F TV socketout let single complete all as specified and directed

S&F RJ 11 tel jack sigle with sutter complete all as specified and directed

S&F USB type A fast charger 1M 18 Watt complete all as specified and directed

S&F sheet metal distribution board, SPN, 12 way 240 Volt, Double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.

S&F sheet metal distribution board, SPN, 4 way 240 Volt, Double door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, isolator with 200 A tinned copper bus bar complete all as specified and directed.

S&F, in replacement miniature circuit breakers, SPN, type curve‘C’ 10KA, 40 to 63 Amps, 240 Volts. complete all as specified and directed.

S&F in replacement miniature circuit breakers, SPN, type curve‘C’ 10KA, 32 Amps, 240 Volts. complete all as specified and directed.

S&F in replacement miniature circuit breakers, SP, type curve‘C’ 10KA,6 to 32 Amps, 240 Volts. complete all as specified and directed.

Supply and fixing 415V 25 KA 'C' MCCB for V TPN of 160 Amps in the DB complete all as specified and directed.

Supply and fixing 415V 10KA 'C' curve miniature circuit breaker (MCB) of TPN 100 Amps in the DB complete all as specified and directed.

S&F in replacement LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 20 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

S&F in replacements LED light fitting, high lumens batten type, housed in extruded from powder coated aluminium, 10 watt for soft diffuser lighting with and including lamp and connecting up complete with white PVC insulated and PVC sheathed round flexible three core copper conductor cable of suitable size and testing on completion all as specified and directed.

Supply and Fix in replacement PVC Deco type round light incl LED lamp 7 watt complete all as specified and directed.

Supply and Fix in replacement Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum housing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete. for fixing in wall of suitable size and length of bracket not less than 1.2 mtr complete all as specified and directed.Note:-Cost of bracket,clamps and nut bolts included in quoted rate.

Taking down Ceiling Fan of any size and deposited to MES store yard complete all as specified .

S&F sub-main wiring with 2 single core, 4 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper conductor multi stranded,4 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.

S&F, sub-main wiring with 4 single core, 10 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper conductor multi stranded, 10.0 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.

S&F sub-main wiring with 2 single core, 6 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper multi stranded conductor drawn in and including PVC conduits of 20mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper conductor multi stranded, 6 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.

S&F sub-main wiring with 4 single core, 16 Sqmm PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper multi stranded conductor drawn in and including PVC conduits of 50 mm size including drawing one run of PVC insulated, unsheathed, 1100 Volts grade, FRLSH, copper conductor multi stranded, 16 Sqmm size as continuous earth wire drawn through and connected to main switch/DB and testing on completion complete all as specified and directed.

Supply and fixing in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete. all as spsecified and directed

S&F, in replacements sheet metal distribution board, VTPN, 4 way 440 Volt, single door factory made and tested complete, protection class IP-42 suitable for mounting MCCBs, with 200 A tinned copper bus bar complete all as specified and directed.

S&F, in replacements sheet metal distribution board, TPN, 4 way 440 Volt, single door factory made and tested complete, protection class IP-42 suitable for mounting MCBs, with 200 A tinned copper bus bar complete all as specified and directed.

S&F in replacement MCB single pole 6 to 32 Amp 240 Volt 'B' curve 10 KA complete all as specified and directed.

S &F sheet metal enclouser with socket plug top and MCBs Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 amps complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers complete all as specified and directed.

Supply and Fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Steel body complete all as specified.Note Old Desert Cooler deposited to MES store Yard.

Supply and fixed concealed rigid non-metallic PVC conduit of external dia 40mm exclusive of boxes (Junction/terminal) but inclusive of all tees,bends,elbows,reducers,bell mouth tube ends and fixing accessories such as couplers,lock nuts saddles pipe hooks etc complete all as specified

Supply and fixed concealed rigid non-metallic PVC conduit of external dia 25mm exclusive of boxes (Junction/terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers,lock nuts saddles pipe hooks etc complete all as specified

Supply and fixed Junction boxes(1 to 4 way) suitable for 40 mm pipe copmlete all as specified

Supply and fixed red and green engagement office LED light complete all as specified

M&L for earthing and testing complete with galvanized iron earth plate electrode 60 cm x 60cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 M below normal ground level with top edge plate at adepth not less than 1.5M below normal ground level connected to and including earth lead GI wire 4 mm dia, by means of bolts and nuts,check nuts and washers etc.,made of GI and connected to panel/distribution board and earthing test point and earth dolly all as shown in elect plate No.3 of SSR Part-1 including necessary earth work,excavation PCC chamber cover with handle (PCC 1:2:4) incl 20mm dia GI pipe of medium grade for watering and 15mm dia GI pipe of light grade for protection of earthing lead ,wire mesh, funnel, charcoal dust,common salt,copper lugs etc all as specified and directed .

Builders Harpal (BID ID -3166171)

M/S Rajeev Sharma and Co. (BID ID -3160372)

yash enterprises (BID ID -3159636)

Shikhar ji Enterprises (BID ID -3165853)