Upgradation of 02 School at various Location in Ta-Dediyapada district NARMADA district.

Excavation for foundation upto 1.5 m depth including sorting out and

stacking of useful materials and disposing off the excavated stuff upto

Loose or soft soil

Filling with the available excavated earth (excluding rock) in trenches, plinth, sides of

7 foundation etc. in layers not exceeding 20cm in depth consolidating each deposited 12.56 137.47 Cmt.

layer by ramming and watering.

Filling in plinth with sand under floors including watering ramming, consolidating and

8 dressing complete 40.35 489.28 Cmt.

‐ work using common burnt clay building bricks having crushing strength not less

9 than 35 kg./Sq.Cm. in foundationand plinth in Cement Mortar 1:6. (1 Cement : 6 215.80 5130.82 Cmt.

finesand)(C) Fly Ash Bricks

Brick work using common burnt clay building conventional bricks having crushing

10 strength not less than 35 Kg/Sq. cm. in foundation and plinth in cement mortar 1:4 (1 5.11 5349.10 Cmt.

Cement :4 fine sand) (C) Fly Ash Bricks(For Earth Quack Zone )

Providing & laying Cement Concrete 1:4:8 (1 Cement :4 Coarse sand :8 hand

11 brocken stone aggregates of 40mm nominal size) in plinth and curing complete 92.72 2738.11 Cmt.

including cost of formwork. (A) Foundation and Plinth - At plinth level

Providing and laying cement concrete 1:5:10 (1- Cement : 5- Coarse sand : 10- hand

12 broken stone aggregates 40 mm nominal size) and curing complete including cost of 61.57 2575.34 Cmt.

formwork in (A) Foundation and Plinth

Providing & laying Cement Concrete 1:2:4 (1 Cement : 2 Coarse Sand : 4 graded

stone aggregate 20 mm nominal size) & curing complete including cost of form work

(A) Foundation and Plinth -Below Tie beam, Plinth protection & surface leveling work.

Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-

14 graded stone aggregate 20mm nominal size) laid in one layer and finished with a 35.28 304.39 Smt

floating coat of neat cement. (A) 40mm thick.

Providing and laying controlled cement concrete M.200 and curing complete

including the cost of formwork and excluding the cost of reinforcement for reinforced

concrete work in (C) Coping Vertical and horizontal for all floor (Cement Level 360 Kg)

Providing I.S.I. T.M.T Bars Fe.500D steel reinfocement (ISI mark) Confirmed to IS-

16 1786 for R.C.C.work including Cutting, bending, binding and placing in position etc. 751.14 77.29 Kg.

complete.For all floors

Providing 10mm thick cement plaster in single coat on on brick/concrete walls &

17 Ceilling & Soffit of stair interior plastering in cement mortar 1:4(1 cement 4 sand) 113.52 162.12 Smt

watering, curing etc. complete.For all floors

Providing 15mm thick cement plaster in single coat on rough or fair side of single or

18 half brick wall for interior plastering in cement mortar 1:4(1 cement 4 sand) watering, 1475.16 206.23 Smt

curing etc. complete.For all floors

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than

gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt

resistance exterior paint of required shade (Company Depot Tinted) with silicon

19 additives. New work (Two or more coats applied @ 1.43 litre/ 10sqm. Over and 5038.31 Smt

including priming coat of exterior primer applied @ 0.90 litre/10 sqm, Item Includes

two coat of primar and putty with scafolding at all level of work. As per Approval of

Engineer Incharge.

ITEM Per Estimated

DESCRIPTION OF ITEM QTY SOR 2023-24

No. Unit Amount

Distempeing (Two coats) with oil bound washable distemper having VOC content les

than 50 grm/liter of approved brand and manufacture and of required shade on wall

surfaces to give an even shade, over and including a priming coat and putty with

20 alkali resistance primer of approved brand after thoroughly brushing the surface and 2233.66 77.30 Smt

other foreign matter and also including preparing the surface even and sand parpered

smooth As per Approval of Engineer Incharge

Painting two coates (Including Priming coat)having Low VOC content over new steel

and other metal surfaces with enamel paint,primar coat, brushing, interior to give an

even shade including cleaning the surface of all dirt,oil, grease,dirt, dust and other

foreign matter with fine steel wood, scrapers and sand paper with ready mixed

priming paint brushing red lead etc. complete.(As directed by Engineer in charge)

Providing and laying 25mm thick polished Kota stone flooring/staircase treads

(two pieces with three groves in front of steps) over 20mm (average) thcik base of

22 cement mortar 1:6 (1 cement 6 coarse sand) laid over and jointed with grey cement 361.37 1019.39 Smt

slurry including curing, rubbing, and polishing etc. complete.

Providing & fixing average 25mm thick Double polished Kota stones for shelves in

23 cup board, seating plat form, including curing, rubbing, polishing etc. complete. (As 27.00 815.58 Smt

directed by Engineer in charge)

Providing & Fixing 25mm thick double polished vertical Kotah stone for (partion)urinal

24 as par drawing including round edge moulding etc comp. (As directed by Engineer 3.60 1335.49 Smt

providing & laying cement water proofing of average 60mm thick for terrace for all

floors using first layer cement mortar (1:3) over an exsisting surface second layer of

arranging brick bats acording to slop adding suitable chemical to make water tieght &

25 again third layer of cement mortar 1:3 on above including adding water proffing 416.69 354.54 Smt

compound and finishing top with net cement slury using cement @ 2.75 kg/sq mt.

making any patterns and design on the top etc. complete as directed.(As directed by

Engineer in charge)

Providing & Laying Broken China Mosaic flooring for plain & curve surface 12mm to

20mm of broken piece of ceramic tiles or Glazed tiles ( one or more colour as

directed by Engg. In charge ) to be laid over cement mortar bedding of CM 1:3 to

plain or and slopes and to be tempered to bring mortar cream up to and colour

pigment including rounding of junctions and extending them pu to 15cms along the

wall and curing with bends any patterns of designs as per deawing or directions

including cleaning with water and oxilic acid using 1 kg / 1 bag of water proofing

Providing cement vata (10 cm X 10 cm size) quartar round in cement mortar 1:1

27 including neat cement finishing, watering etc. complete Respectely plaster acitivity 18.60 24.28 Rmt

shall be commenced only after completion of vata work.

Providing & fixing in position mild steel door with ventilation frame 40x40x6 mm and

shutter frame 35x35x5mm ,75x5 mm ms flate at lock rail,10 mm square bar in vent

at10 cm c/c coverd with corrugated ms sheet 0.6 mm thick, including applying a

priming coat of read lead paint including cleanicn the surface of all dirt, dust and

other foreign matter (As directed by Engineer in charge& approved drawing and

Providing and fixing FRP frame size 100x50 mm and 28mm thick FRP

depress panel shutter having extra reinforcement on sides & edges in Gel

coat finish. The core of the shutter & frame is to be filed up with

injected fire retardant grade polyurethene foam done in situ

alongwith embedded wooden pieces for stiffening & also taking hinges

& fintures. The whole FRP frame & shutter is to be water proof

weather proof, termite proof & resistance to mild acid/alkali. Rates

are to be inclusive of S.S hinges with necessary screws & alluminium

fixtures & fastenings & fastener sleeve.

ITEM Per Estimated

DESCRIPTION OF ITEM QTY SOR 2023-24

No. Unit Amount

Providing and fixing window having extruded aluminum Colour Powder Coated

section frame main outer size 63.50 x 38.10 x 1.95 mm(of Jindal Section no:4605,@

Wt 1.094 Kg / Rmt), horizontal two track member size 61.85 mm x 31.75 mm x

1.20mm (of Jindal Section no: 8687 @ wt.of 0.695 Kg/mt), vertical member of size

61.85 mm x 31.75mm x 1.30 mm (of Jindal Section no:8758 @ wt.of 0.0.659 Kg/mt)

with sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (of Jindal

Section no:8949 @ wt.of 0.456Kg/mt), vertical member of size 40mm x 18mm x

1.29mm (of Jindal Section no:8947 @ wt.of 0.456Kg/mt/ Section 8948, @ Wt.

Kg/mt) with 5 mm thick transparent bronze colour tinted float glass with powder

coated aluminum fittings and fixtures and transparent silicon sealant glass fixing to

frame as per details etc complete for window.

31 Providing & fixing G.I rain water Spout of 65mm dia and 60cm length. 26.00 717.46 NO

Painting of logo on front side wall as directed by Engineer in charge and as per

approved drawing.

Providing and laying white glazed tiles 6mm thick in flooring treads of steps

33 and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 287.30 964.48 Smt

coarse sand ) finishing with flush pointing in white cement.

Providing and laying white glazed tiles 6mm thick in skirting, riser of steps and dedo

34 on 10mm thick cement plaster 1:3 (1-cement : 3 coarse sand) and jointed with white 9.30 1017.52 Smt

Providing & Fixing Green board(2400mm x 1200mm) with soft board(1200mm x

1200mm) on wall as per the drawing & design etc. complete.

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1-

Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced

with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in

cement mortar 1:3 and curing complete.(E) 100mm thick

Providing & laying Sandwich platform of maximum 700mm width : a) Sandwich type

platform of top stone as 18 mm thick Granite of approved shade and sample and

bottom stone as 25 mm thick single side polished kota stone with 25 mm thick

screed of cement mortar 1:4 in between two stones. The stone shall be fixed by

chasing in to the wall surface and providing necessary MS supports of 50x50x6mm

Angle or "T" (hot dip galvanised) and embedded in between the two stones etc as per

the drawing / specification and / or as instructed of EIC complete and b) 75 mm

37 raised platform (Otli) at floor level with polished kota laid on 50mm screed of (1:2:4) 5.40 4246.34 Smt

and skirting of kota stone as per design and approved sample. The rate includes

rounding, champhering and mirror polishing of edges, facias of granite, MS supports,

all material labour and wastage, as per drawing, including necessary bonding

adhesive (if required) of Araldite or equivalent. Rate shall be also inclusive of making

holes & cutouts for SS sink, Oval wash basin, Piller tap / Bib tap etc. as directed by

engineer in charge. (Only finished single side granite work shall be measured & paid

for). (As directed by Engineer in charge& approved drawing and design etc.)

Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete

block 60mm thick with grade of concrete M300 pnumatic compressed /

38 vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 721.00 705.95 Smt

including 35 mm Sand layer for levelling and filling the joint with sand in proper line

and level as per guidlines of IRC : SP 63-2018 etc. Complete.

Providing and fixing of highly durable precoated Roofing Sheets having high quality

color coating throughout the roof and having minimum 0.6 mm thickness .The

Color Coated sheet Roofing fixed with galvanized iron /color powder coated J or L

Hooks, Bolts and nuts 8mm diameter with bitumen and G.I. limpet washer or color

powder coated limpet washer. filled with white lead complete as per approved

sample and color as directed by engineer in charge

Provoding and supplying small dust bin (Green,Blue,Red,Black yellow,) 7 Litres as

directed by Engineer in charge, Approve Make- Cello, Aristo, Nayasa

Provoding and supplying big dust bin (Green,Blue,Red,Yellow) 20 Litres as directed

by Engineer in charge Approve Make- Cello, Aristo, Nayasa

Provoding and supplying big dust bin ( Green,Blue,Red) 50 Litres as directed by

Engineer in charge Approve Make- Cello, Aristo, Nayasa

ITEM Per Estimated

DESCRIPTION OF ITEM QTY SOR 2023-24

No. Unit Amount

Providing water harvesting pit of 5.50 m Dia well and 2.46 mt x2.46mt x4.00 mt size

brick masonary well for water logging with excavation in any strata upto four meter

depth, filling the pit with B.T. Metal 40 mm in 0.80 mt. depth with 25-40mm kapachi,

0.80 mt. depth and 0.50 mt. depth with coarse sand & charcoal in layers including

making P.V.C. line for water inlet etc. as directed with 300mm dia bore 40 mt. depth

and 200mm dia UPVC CM type casing pipe as slott 1.5 to 2.0 mm size and ordinary

pipe with gravel packing or as directed.

Providing and constructing filter chamber of size 1.50 x 1.50 x 1.50 mt. as directed

44 including connection rainwater pipes as per detailed as directed by Engineer in 1.00 21404.64 No

charge including cost of labour and material.

Providing & supplying ISI mark P.V.C butterfly valves & Reflux valves of following

class and diameter including all taxes, insurance, transportation, frieght charges,

octroi, inspection charges, loading, unloading, conveyance to departmental store.75

Providing and laying tactile tile (for vision impaired persons as per standards) of size

300x300x15 mm having with water absorption less than 0.5% and conforming to

IS:15622 of approved make in all colours and shades in for outdoor floors such as

46 footpath, court yard, multi modals location etc., laid on 20mm thick base of cement 82.23 1851.32 Smt

mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the

joints with white cement mixed with matching pigments etc. complete as per direction

of Engineer-in-Charge.

Painting two coats (including priming coat) on new steel and other metal surface with

47 synthetic enamel paint, brushing to give an even shade including cleaning the 11.88 69.15 Smt

surface of all dirt, dust and other foreign matter.

Construction of a soak well of as per the approved drawing & design etc.in all sort of

48 soil complete as directed and approved by engineer incharge.( The internal In-to-in 10.60 6002.65

dimension shall be considered for calculation)

Construction of a septic tank as per the approved drawing & design etc.in all sort of

49 soil complete as directed and approved by engineer incharge. ( The internal In-to-in 25.00 5606.01

dimension shall be considered for calculation)

Providing and fixing washbasin with single hole for pillar tap with M.S. brackets

painted white including sutting holes and making good the same but excluding

50 fittings.(A) Vitreous China:(ii) Flat Back washbasin 550 mm x v 400mm size. (i) In 12.00 1973.28 NO

white colour including CP Brass west , MI Fisher union and Pillat tap

Providing & fixing Stainless steel 316 Grab Bar 40mm dia.75Cm long rail.as directed

and approved by engineer incharge.

Construction of ICN Chamber as peras directed and approved by engineer incharge.

Providing and fixing screw down bib taps of following size.(B) Brass chromium plated

screws down Bib Tap. (i) 15mm dia.

Constructing brick masonry chamber for underground C.I. Inspection chamber and

bends with bricks having crushing strength not less than 35Kg/Cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.)

and Wt. of frame 15Kg.) (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

54 coarse sand :4-graded stone aggregate 20mm size) foundation concrete 14.00 3175.32 NO

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete.(i) Inside dimensions 455mmx 610mm and 450mm deep

for single pipe line.

Providing & fixing urinal of Approved quality including connecting the urinal with

waste pipe, trap etc. complete (A) White earthenware flat back or corner type

(including Angle cock,Waste coupling,connection pipe & waste pipe) as approved by

engineer incharge.

Providing and fixing wash down water closet (European type W.C pan)

with integral P or S trap including jointing the trap with soil pipe in cement mortar

56 1:1 (1 cement : 1 fine sand) (seat cover,Jet spray & Flush Tank to be measured 1.00 2265.90 NO

Including) (A) Vitreous China (I) Long pattern white as directed and approved by

engineer incharge.

ITEM Per Estimated

DESCRIPTION OF ITEM QTY SOR 2023-24

No. Unit Amount

Providing and fixing water closet squatting pan (Indian type W.C pan) size

mm (earthwork, bed concrte, foot rests,Flush Cock and trap to be measured and

including paid) (A) Vitreous China (I) Long pattern white as directed and approved by

engineer incharge.

Providing erecting and fixing double coated ISI water tank of required capacity

each with all necessary fittings and connection etc. complete on terrace

59 Providing & fixing UPVC ball valve(A) 40mm dia. 6.00 1687.71 NO

60 Providing & fixing UPVC ball valve(A) 25mm dia. 32.00 650.84 NO

Providing and fixing S.W. gully trap with C.I. grating brick

masonry chamber and water tight C.I. cover with frame of 300mm x 300mm

size (inside) with standard weight.(i) Square mouth traps.(B) 150mm x 100mm

size P or R type

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of cutting

and making good the walls.

Providing laying and jointing in true line and level 40mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the

63 help of clamp at every two metre C/C or shall be concealed as 50.00 148.12 Rmt

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 25mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the

64 help of clamp at every two metre C/C or shall be concealed as 505.00 91.84 Rmt

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of

Providing laying and jointing in true line and level 15mm

dia.U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with the

65 help of clamp at every two metre C/C or shall be concealed as 115.00 72.65 Rmt

directed including necessary fittings etc. including testing of pipe and

joints and fixing the same with adhesive solvent, including cost of

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working pressure PVC pipes

of the following out side dia. Special density complete with special flange

compression type fitting,wall clips etc. including making good the wall ceiling and

floor.(G) 160 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working pressure PVC pipes

of the following out side dia. Special density complete with special flange

compression type fitting,wall clips etc. including making good the wall ceiling and

floor.(G) 110 mm dia

Providing & fixing to wall ceiling and floor 6.0 kg F/cm2 working PVC pipes of the

following out side dia. Special density complete with special flange compression type

fitting,wall clips etc. including making good the wall ceiling and floor.(F) 75 mm dia

Providing and fixing chromium plated brass half trun flush cock of approved quality

including fixing in pipe line etc. complete..[ii] 25 mm

Providing and fixing Ball Cock of approved quality as directed. (A) copper metal -

(II) 25 mm dia.

Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring treads of

71 steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3- 330.19 1120.36 Smt.

coarse sand ) finishing with flush pointing in white cement

Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green)

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires

72 up to 10 mtr length , in below type of pipe erected with 6A Modular type switch / bell 55.00 350.47 Pt.

push & accessories and earth continuity of following type, erected on PVC /

Metallic/Wooden box, single mounting base frame covered with

ITEM Per Estimated

DESCRIPTION OF ITEM QTY SOR 2023-24

No. Unit Amount

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both are of

.ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires up to

mtr length, in below type of pipe erected with 6A Modular type switch and hum free

EME step type electronic fan regulator mounted and accessories with earth

73 continuity of following type erected on PVC / Metallic/Wooden box, single mounting 31.00 489.85 Pt.

base frame covered with textured/metallic/white front plate modules erected on / in

wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as

directed.(e) in existing pipe erected flushed on wall/ceiling complete,Cat. III

Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are of ISI

marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to 10 mtr

Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin socket

erected on PVC / Metallic/Wooden box, single mounting base frame covered with

textured / metallic/white front plate modules erected on / in wall / ceiling with

following type accessoriesCat. III

Providing following type of Modular Type Accessories mounted with PVC /

metallic/Wooden box, single mounting base frame covered with textured /

metallic/white front plate , modules erected with necessary connections as per site

situation directed by Engineer In charge.(7) Blank Plate Single,Cat.III

Providing following type of Modular Type Accessories mounted with PVC /

77 metallic/Wooden box, single mounting base frame covered with textured / 8.00 153.52 No.

metallic/white front plate , modules erected with necessary connections as per site

situation directed

Providing by Engineer

and erecting In charge.(8)

ISI mark embossed Computer

(F.R.L.S.)of following size complete to be erected on/in wall or ceiling erected with

necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with

following dia of pipes, in approved manner as directed (a) 20 mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

79 /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 63.10 44.44 Mtr.

stranded wire of green colour for earth continuity of following size,(E) in existing

pipe,(a) 2 wire 1.5 sq. mm

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected concealed in

80 /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated 530.60 59.59 Mtr.

stranded wire of green colour for earth continuity of following size,(E) in existing

pipe,(b) 2 wire 2.5 sq. mm

providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on wall /

81 ceiling with 2.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green 93.30 82.82 Mtr.

colour for earth continuity of following size,(E) in existing pipe,(a) 2 wire 4 sq. mm

Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 Watt

assembled on single MCPCB, with housing used as a heat sink shall be made of

thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast powder coated

and high U.V. & corrosion resistance with diffuser with company mark/name 160V

to 270V, Power Factor more than 0.95, THD < 15%,

Luminaire efficacy> 85 lumens/watt ,LED

LED driver efficiency > 85 %

( fitting required LM-79 & LM-80 Certificates)(NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select any

wattage capacity between the ranges shown.),(A) Tube Light with integral driver,(ii)

20 Watts, Surge - 2KV,IP-20, conventional 4 feet,Cat-lll

Supplying and erecting led lamps with following wattage capacity of 220 to

voltage, minimum 15000 burning hours life, 500 V in built-surge

83 protection,Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp 2.00 112.11 No.

holders, pf >= 0.5(A) LED Lamps integral type, with PC diffuser suitable LAMP

holder,(ii) 8 watts ,Cat-III

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to

84 operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in 20.00 112.11 No.

existing box. confirming to IS 8828/1996 with ISI Mark , Cat.III

Providing & erecting 240 V MCB double pole switch for motor & inductive load (C

85 Curve) having 10 KA breaking capacity & confirms to IS : 8828 in existing box having 6.00 299.97 No.

following capacity ,(A) 6 to 32 Amp. Cat.III

Sheets steel powder coated enclosure suitable for incorporating One/Two nos. MCB.

ITEM Per Estimated

DESCRIPTION OF ITEM QTY SOR 2023-24

No. Unit Amount

Providing and erecting Sheet Steel powder coated MCB distribution board - flush /

surface mounted fitted with busbar, neutral link, earth bar and DIN rail, Conforms to

IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate nos. of

MCBs.(The DBs should be used of same company of MCB to be used) suitable for

(A) single phase incoming and horizontal single phase outgoing (b) sheet steel

double door,(ii)12 way (IP-43)

Providing and erecting Approved make RCCBs conforming to IS: 12640 and having

sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for

operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action &

tripping with all advance feature & do not incorporate any electronic component for

following Max. rating erected as directed.,(ii) 40Amps. FP , Cat. III

Providing & erecting Medium Voltage Danger Notice Board sticker as per language

suggested by engineer incharge of standard size as per IS-2551

Supplying & erecting in earthpit of minimum bore dia. 225mm size approved make

Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS 3043-1987

made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 80 mm having

80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-250 Micron

galvanising, connection terminal dia of 14 mm with constant ohmic value

90 surrounded by highly conductive compound with high charge dissipation suitable for 1.00 4591.46 No.

following type of applications with chamber and heavy duty cover.(approved make

OEM has to submit test certificate including value of earth resistane of installation.(a)

For Electrical Installation up to 440V in normal soil

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

91 Providing and erecting Annealed bare Copper wire 8 to 16 SWG. 1.00 794.87 Kg.

Providing , erecting , fabricating the M.S. structure as per requirement on site

incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections

92 complete with cutting, welding, grinding & finishing duly painted with one coat of red 7280.81 77.77 Kg.

oxide with erection on site as per direction of engineer in charge with necessary

grouting, cementing, plastering & finishing complete.

Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with double

93 ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm sweep complete 20.00 1948.29 No.

having 3blades with aluminium blades with , canopy & 30 cm. down rod erected with

earthing.(Make shall be approved by Engineer in charge))

Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod

94 erected duly painted for fan complete with proper insulation without leakage and 20.00 108.07 Mtr.

Supplying & erecting fan hook box of 10 mm M.S. round bar bounded to the RCC

bars up to 50mm length each side and pierced through a 16 Gauge M.S. box /

Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing.

Providing & erecting water cooler having storage capacity 150 Ltr. & cooling capacity

150 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should

drop by 15˚C within a hour, The water cooler should be comprising of hermetically

96 sealed compressor, fan motor, condensing unit, water tank surrounded by 1.00 46648.87 No.

evaporating, coil, thermostats, relay etc.complete with necessary inlet & outlet

connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system with

M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter,

carbon filter suitable buster DC pump capacity 80 psi, mention with 40 psi inline type

post carbon filter auto low & high pressure switches with following size of storage

tank & LPH capacity & erected as directed [C] 50 Ltr / Hr with 150 psi 2 nos booster

Providing ABC Type Fire Extinguisher 6 Kg Isi Marked All Required Fitting

Accessories.(M.R.)

Providing Co2 Type Fire Extinguisher 4.5 Kg Isi Marked All Required Fitting

Accessories.(M.R.)

Painting of logo/iBala Drawing on front/inside wall as directed by Engineer in charge

and as per approved drawing.

Making low height seating in 25MM AV. Thick one side polished kota stone 0.45 mt

ht. as per approved drawing and design etc. complete.

Making low height seating in 25MM AV. Thick one side polished kota stone 0.30 mt

ht. as per approved drawing and design etc. complete.

ITEM Per Estimated

DESCRIPTION OF ITEM QTY SOR 2023-24

No. Unit Amount

Making low height seating in Brick work 0.45 mt ht. as per approved drawing and

design etc. complete.

Making low height seating in Brick work 0.30 mt ht. as per approved drawing and

design etc. complete.

(A)Providing a mystrey wall as per approved drawing and design etc.

complete.(3.18mt X 1.67mt)

106 Making a new SAND PIT excluding side wall For creating playing area. 300.00 152.51 SMT

Providing Space for long jump of length 6.0 mtr and width 2.33mt including

107 meter sand filling and painting Hori. Scale on the top of IPS. As per drawing and 1.00 5464.10 NO

design etc. complete. Ht 0.45 mtr.

1- For G + 1 building periscope provided with 3.25 m clear height with 15 cm dia pvc

pipe including fixing with 2 elbows at top and and bottom with transperant glass

including all necessary fixing with making necessary holes and finishing it etc

I / WE am / are willing to carry out the work at ________ % above / below (percentage should

Estimated amount put to tender Rs.

Deduct / Add: _____ % below / above Rs.

Net Amount of Part - A Rs.

(Please strike out which ever is not applicable)