PROVN OF DEFI OTM ACCOMODATION (PH 1 OF TWO PHS) AT PANAGARH MIL STN UNDER GE (P) PANAGARH

Amount

Sch 'A' Part -I (Building Works) Note:- This Sch is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col 5 signifies this fact only.

Construction of Building for office and ADM block. Complete all as specified and as shown drawings.

Construction of Building for JCO Mess and Club. Complete all as specified and as shown on drawings.

Construction of Building for JCO's single living accn including car/ scooter shed, Complete all as specified and as shown on drawings.

Lumpsum price worked out by the tenderer/ bidder for SITE CLEARENCE, AREA DEVELOPMENT, as listed in Schedule ‘A’ Part-II on Serial Page No. 33 & 34

Lumpsum price worked out by the tenderer/ bidder for INTERNAL ELECTRIFICATION as listed in Schedule ‘A’ Part-III on Serial Page No. 35 to 43

Lumpsum price worked out by the tenderer/ bidder for INTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IV on Serial Page No. 44 to 45.

Lumpsum price worked out by the tenderer/ bidder for ROAD/ PATH/ CULVERT as listed in Schedule ‘A’ Part-V on Serial Page No. 46 to 53

Lumpsum price worked out by the tenderer/ bidder for AREA DRAINAGE as listed in Schedule ‘A’ Part-VI on Serial Page No. 54 to 55.

Lumpsum price worked out by the tenderer/ bidder for SEWAGE DISPOSAL as listed in Schedule ‘A’ Part-VII on Serial Page No. 56 to 59 .

Lumpsum price worked out by the tenderer/ bidder for FENCING AND GATE as listed in Schedule ‘A’ Part-VIII on Serial Page No. 60 to 64

Lumpsum price worked out by the tenderer/ bidder for EXTERNAL WATER SUPPLY as listed in Schedule ‘A’ Part-IX on Serial Page No. 65

Lumpsum price worked out by the tenderer/ bidder for EXTERNAL ELECTRIC SUPPLY as listed in Schedule ‘A’ Part-X on Serial Page No. 66 to 69

Lumpsum price worked out by the tenderer/ bidder for INCIANARATOR as listed in Schedule ‘A’ Part-XI on Serial Page No. 71 to 77 .

Lumpsum price worked out by the tenderer/ bidder for LIGHTNING PROTECTION as listed in Schedule ‘A’ Part-XII on Serial Page No. 73 to 74

13. Sch 'A' Part-XIII (MISC B&R AND E&M ITEMS) Note : This schedule is not pre-priced by MES and the pre-priced rate indicated as "Rs 0.00" under Col. 5 siginifies this fact only. Material & Labour for mixixing of Fly ash, Clinker & stone dust in proportion of 1:3:6 ( i .e 10 % Fly ash, 30% Clinker and 60% Stone dust) laying , watering , ramming and compacting with vibratory roller to get min CBR value 8% and Dry density 97 % placed at required camber and gradient complete as directed Note:- Design mix is mandatory. The design mix shall be got approved by GE. The unit rate quoted by the bidder is inclusive of design mix and testing .

INTERNAL WIRING M&L for blank plate

Supply and fixing TV socket outlet piano flush type ISI marked with valid CML No. complete all as specified and directed.

Supply and fix surface Wall mounting Champagne glod finish fixture with plastic body suitable for 9 Watt LED lamp B22 base including 9 W LED lamp indoor luminaries.

Supply and fix surface mounted LED mirror light 13 watt Indoor luminaries with and including electronic driver and LED lamp , pre -wired including necessary electric connection from celling rose to light fitting.

S & F sheet metal enclosure for vertical Loadline DB's Tripe pole and neutral 4 way double door 415 volts when MCCB 4 pole to be used as incommer complete all as specified and directed .

M&L for MCB SPN 40A, 230V, 50 Hz, computable for DIN rail "C" series , rupturing capacity 10KA complete with connection.

M&L for MCB SP 40A, 230V, 50 Hz, computable for DIN rail "C" series rupturing capacity 10KA complete with connection.

M&L for MCB SP 6 to 32A, 230V, 50 Hz, computable for DIN rail "C" series,rupturing capacity 10KA complete with connection.

S&f TV socket complete.

M&L for Coaxile cable CCA Cooper cotted alloy 100 M GHz 75 Ohm Direct TVDish Cable TV, Antena, Satelite, DVR and Amplifiers

M&L for PVC Concealed conduit only with necessary junctionbox and accessories 20mm medium grade for TV and Telephone cable with all cutting and finishing work.

EXTERNAL ELECTRIC SUPPLY Supply & fixing Street light fitting LED type capacity 45 W die-cast aluminium body, 45 watt LED 6K and toughened glass complete with all accessories all as directed.

Supply, installation, commis-sioning of Metal Top Deep Freezer single phase 240 volt, 50 Hz300/320 LTR Capacity.

Supply, installation,commis-sioning of Water cooler partially stainless steel,electric drives single phase having approx storage and nominal cooling capacity as shown capacity of 40 litre and nominal cooling capacity of 40 Litres per hour.

Supply & Fixing junction box of size 155mm x 210mm x 92mm or nearest higher size made of polycarbonate with IP 65 degree of protection (KF160G), dust proof, water tight, shock proof, fire retardant, with internally embedded gasket fitted with heat treated bakelite terminals block and PVC Glands for cable entry complete all as directed Make:- HENSEL/ABB/ Equivalent

EXTERNAL WATER SUPPLY M&L for construction of Valve pit for gate valve 50/40 mm dia with pit cover including locking arrangement (size 60x60x60 cm) all as specified and directed by Engineer-in-charge.

ARBORICULTURE AND GARDENING Supply and Fix LED Bollard light 1x 10 Watt, IP65 rated inverted pyramid tripod type with soft 360 degree light distribution.

Supply and fix Post top lantern 40 watt LED decorative light with IP 65 protection or equivalent to Havells/Bajaj

SOLAR STREET LIGHT Supply and fixed of solar street light with built charger controller (PWM) 12 V 100 Ah, charger battery form solar panel, Protects batter form over charging/over discharging, protects panel from revers current, including 5 mtr pole with suitable fixture and LED lamp 16 Watt complete all as specified and directed.

COOLING APPLIANCE Supply and install refrigerator electric driven single phase double door capacity 310-360 Ltrs BEE 3 Star rated.

Supply and install refrigerator electric driven single phase Minimum capacity 185 Ltrs BEE 5 Star rated.

Supply & install voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input varition between 170V to 250V with output voltage stabilized at 230W with accessories of + 2.5% and capacity 1 KVA.

Supply commissioning and testing of LT panle outdoor type factory made powder coated suitable for 415 volt, 50 Hz, CRCA sheet 3.15 mm thickness conforming to the norms of CPRI approved (Shock proof, rust free, corrosion free, acid and chemicla reswistant , fire retardant , having high impact, made of halogen and silica free recyclabe material), UV resistant having high grade gasket made of polyurathane flame retardant, the feeder pillar panle with following accessories :- System Voltage-415V, 3-Ph, 4 wire, 50 HZ BUSBAR rating -200 Amps , cable entry (incomming and outgoing ) form bottom with cable gland MCCB 4 pole 63 Amps 25 kA - 01 Nos (incoming from LT Feeder pillar 2), 415 Volts, 50 Hz-01 No MCCB 4 pole 40 Amps 16 kA - 03 Nos , (01 jco living ,01 street light &01 spare)1 415 Volts, 50 Hz-01 Nos (Digital panel meter for amp, volt, KWH, PF and other parameter flushing mounting of size 96 x 96 mm , LED indicating lamps -03 Nos, Time switches astro type 250V single phase of 20 Amp, Non hygroscopic fiber bushes and brass screws and Internal Wiring of Panel.

Supply, installation,commissioning of Water cooler partially stainless steel,electric driven single phase havingapprox storage and nominal cooling capacity approx storage capacity of 80 litre and nominal cooling capacity of 40 Litres per hour

Supply commissioning and testing of LT panle outdoor type factory made powder coated suitable for 415 volt, 50 Hz, CRCA sheet 3.15 mm thickness conforming to the norm of CPRI approved (Shock proof, rust free, corrosion free, acid and chemicla reswistant , fire retardant , having high impact, made of halogen and silica free recyclabe material), UV resistant having high grade gasket made of polyurathane flame retardant, the feeder pillar panle with following accessories :- System Voltage-415V, 3-Ph, 4 wire, 50 HZ BUSBAR rating -400 Amps , cable entry (incomming and outgoing ) form bottom with cable gland MCCB 4 pole 160 Amps 35 kA - 01 Nos (Incoming from main panel) 415 Volts, 50 Hz-01 No MCCB 4 pole 100 Amps 35 kA- 02 Nos ( 01 For adm bldg & 01 spare) 415 Volts, 50 Hz ,MCCB 4 pole 40 Amps 16 kA - 02 Nos ( 01 street light & 01 spare), Digital panel meter for amp, Volt, KWH, PF and other parameter flushing mounting of size 96 x 96 mm, Time switches astro type 250V Single phase of 20 Amp, LED indicating lamps -03 Nos, Non hygroscopic fiber bushes and brass screws and Internal Wiring of Panel

Supplying, erecting, testing and commissioning of solar water heating system with heat exchanger for cold & warm regions respectively with solar Evacuated tube collector conforming to IS : 12933 (part 1) with amdt.no.1 and IS : 12933 (part 2)/2003 suitable for inlet water with chlorine and fluorine content up to 100 ppm and supply hot water at the outlet of 200 Litters Capacity with elctrical back up meeting specifications as under and comprising of followings :- Supply and fixing Rotational Moulded Polyethylene water Storage Tank (Cylindrical Vertical with closed lockable top with lid and locking arrangements) hoisted and fixed in position all as specified in SSR Part-I of capacity 200 Litters complete for storage of cold water feeding to Solar water heater, including staging made out of MS Angle iron 50X50X6 mm all as specified and directed at site by Engineer-inCharge -1 No Material:1. Solar water heating system: Comprising of solar Evacuated tube collector, collectors stand assembly, stainless steel insulated hot water storage tank with heat exchanger and various other components.Solar Evacuated tube collector component shall have: * Solar Evacuated tube collector cover plate made of toughened glass * Sheet for absorber made of copper * Absorber made of copper sheet and copper tube. The minimum thickness of Aluminium shall be as under. (a) Channel section for sides 1.6 mm (b) Sheet for bottom 0.7 mm (c) Support for glass retaining 1.2 mm (d) Sheet for entire body 1.0 m Absorber: Absorber shall consist of riser, header and sheet for absorer. The Diameter of header shall be 25.4 +/- 0.5 mm and thickness 0.71mm. The Diameter of riser shall be 12.7 +/- 0.5mm and thickness 0.56 and made of copper only.

S&F for Hot water pipe duly insulated with glass wool and aluminium cladding 20 mm bore

ROAD/ PATH/ CULVERT M&L for 250 mm thick three layer (compacted thickness) wet mix macadam (WMM) with crushed stone aggregate of specified grading ,spead using mechanical paver as specifed, rolled and consolidated as specified gradient and camber complete as specified ans as dirrected.

NIRMAL SALES CORPORATION (BID ID -3111448)

D R STEEL CONSTRUCTION COMPANY PRIVATE LIMITED (BID ID -3110954)

Prasur Electricals & Engineering Co. (BID ID -3110708)