15th Finance

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of Brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTHCum (RBR-STCL-6)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (RBR-STCL-5)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH (RBR-STCL-5)

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming,watering etc, as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Manufacture as per BIS:12592(Part 182) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P.F.O.R. destination including, loading, unloading & stacking at site but excluding all taxes.

Laying of Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 / 53 grade at cement as per Clause 1501.2.2 (M30 Grade) at 400 kg per cum, coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.28 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, near approaches to bridge / culvert and construction joints, and curing of concrete slabs for 14- days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Providing House service connections by providing clamp saddles for tapping from HDPE main with MDPE fusion tapping saddle with female metal thread (SS-304) as per BSEN 12201/3 EN 1555/3 or ISO 8085-3 with pressure rating as PN 12.5 compression elbow with one side compression end suit 1/2" (20mm OD) MDPE pipe and other side with male off-take with SS-304 material inserts of size 1/2" BSP (thread body nut and cap polypropylne clip ring 7 POM (Acetylicerisn) and O ring of NBR material as per ISO 14236-2000 standards with PN 16 compression elbow with both side compression end to suit 1/2" 20m OD MDPE pipe body nut and cap polypropylne clip ring POM (Acetylicerisn) and O ring of NBR material as per ISO 14236-2000 standards with PN 16 including all taxes transportation and other levels and duties excluding GST & Seginorage etc HDPE mains including all labour charges etc complete

Eangaging Plumber,Manmazdoor for UGD Connection with material completeas per Quotation

Provision for Seignorage Charges

Towards Merit 2% on Seignorage Charges

Towards Consideration amount 100% Seignorage Charges

Towards DMF 30% on Seignorage Charges

Provision for NAC @ 0.10%

Provision for GST @ 18%

Provision for TPQA @ 0.739 %

Unforeseen item